Servlet ObjectOutputStream is unable to Flush Object Out Simultaneously

          Hi,
          I faced some strange behavior with the Servlet's ObjectOutputStream. I created
          a for loop to flush out object to the calling applet. Instead of flushing the
          Object one by one, the servlet will only flush out all the object at the end of
          the loop.
          The following code illustrate the servlet in performing the flushing:
          public void doGet(HttpServletRequest request, HttpServletResponse response)throws
          ServletException, IOException{
          response.setContentType("application/octet-stream");
          ObjectOutputStream oos = new ObjectOutputStream(response.getOutputStream());
          try {
          for(int i=0; i<10 ; i++) {
          oos.writeObject(new String("Hello"));
          oos.flush();
          } catch(Exception e) {
          e.printStackTrace();
          How do I make sure that the servlet flush the object out one at a time.
          Thanks.
          

I have the same problem and have checked the memory which appears to be fine.
Any where else i could have a look.
Any help, would be greatly appreciated.
Regards
Varinder
Edited by: tonysidhu on Sep 15, 2010 1:44 PM

Similar Messages

  • QTP unable to identify objects in a flex application

    Hi,
    I am having an application that runs on flex 3.6 SDK. I am trying to automate the same using QTP 10.0, but, I am unable to identify the objects. I have installed the Flex 4.5 add-in, but still unable to recognize objects.
    Upon browsing some forums, i found that I need to compile the files "automation.swc, automation_agent.swc, automation_dmv.swc, qtp.swc, automation_flashflexkit.swc" by including them in <include-libraries> ...</include-libraries>  tags in "flex-config.xml" file present under "C:\Program Files\Adobe\Flex Builder 3 Plug-in\sdks\3.6.0\frameworks". We did that, but still, not able to identify objects.
    It would be of great help to me if any some one could tell if I am missing out anything ?

    hello,
    not only need the objects be enclosed by their parent frame, but they also need to be "on top of it" ... meaning if you imagine your report layout as a set of layers that you look at from the side, your "layout surface" would be the bottom most layer and then all objects would be layered on top of each other. in this view, only objects that are in layers above a particular frame can become its children. after that the relationship is determined whether or not an object is inside a frame or not.
    you might want to check your object navigator to see whether or not the particular objects are actually in the right place in the hierarchy.
    thanks,
    ph.

  • Unable to rename objects

    In the OMWB, I am unable to rename objects. For example, in the Source Model under the Views folder, I have a view whose name is 100 characters long. I want to rename it to a 30 character name (something meaningful and not system generated.) The on-line help says to use the menu to click on Object > Rename, but that is grayed-out. The only available options are delete and parse. Both of those work, by the way.
    I just downloaded and installed OMWB last Thursday, so this is latest version of software. I also got the SQL Server 2000 plug-in, and it's installed correctly because I have been successful at migrating SQL Server 2000 to Oracle 10g.

    Hi Mark,
    You are quiet correct. The OMWB does not allow you to rename schema objects in the Source Model. The only objects which can be renamed manually are tablespaces and users in the Oracle Model.
    The workaround is to rename the view inside the Oracle Model PL/SQL editor. Then your view with get generated with the choosen name.
    I have found the following in the OMWB help
    "You can customize the Oracle Model by: Creating, deleting, and renaming objects "
    This will be logged as a bug as not all objects can be renamed. Could you provide a link to the on-line help document which states "click on Object > Rename" as I am having difficulty finding it, and I will add this to the bug report.
    Regards,
    Dermot.

  • Unable to cast object of type OracleXmlType to type XmlDocument

    Hello All:
    I have an Oracle Procedure that is taking an XML Document as an output parameter.
    oCommand.Parameters.Add("errorrecord", OracleDbType.XmlType).Value = System.DBNull.Value;
    oCommand.Parameters["errorrecord"].Direction = System.Data.ParameterDirection.Output;
    When I try to cast this as an XmlDocument so I can set it to my ErrorRecord variable (defined as XmlDocument) and pass it back out of the Web-Service
    ErrorRecord = (XmlDocument)oCommand.Parameters["p_errorrecord"].Value;
    I get the following error: "Unable to cast object of type 'Oracle.DataAccess.Types.OracleXmlType' to type 'System.Xml.XmlDocument'"
    How do I cast / convert the Oracle XMLType back to a .Net XMLDocument to pass out of the function?
    Thanks

    No, I have not tried that yet, but I admit I don't fully understand the syntax in the document posted.
    oCommand.Parameters.Add("p_errorrecord", OracleDbType.XmlType).Value = System.DBNull.Value;
    ErrorRecord = GoCommand.Parameters["errorrecord"].Value; (this is returned as XmlType)
    I don't quite understand the syntax in the posted URL:
    Declaration
    // C#
    public XmlDocument GetXmlDocument();
    How am I to use this to get the XMLDocument?

  • Crystal Reports Server Error - Unable to cast object of type

    Hi Everyone,
    Not sure if this is the right place to post this question but couldn't find a Crystal Reports Server section.
    After doing a windows update on my crystal reports server the following error now occurs when trying to log into .Net InfoView -
    An error has occurred: Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'BusinessObjects.Enterprise.Desktop.InfoView'.
    I found the following article which I followed and re-installed the .net components as well as ensured all services are enabled.
    Article: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303335333433323337%7D.do
    The error still occurs.
    I did some further investigation and found that a similar error occurs in the Admin Console when I try and open the Crystal Report DataSources.
    This is the error page that comes up
    Server Error in '/businessobjects/Enterprise11/WebTools' Application.
    Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.
    +Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information
    about the error and where it originated in the code.+
    +Exception Details: System.InvalidCastException:
    Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.+
    Source Error:
    +The source code that generated this unhandled exception can only be shown when compiled in debug mode.
    To enable this, please follow one of the below steps, then request the URL:+
    1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
      <%@ Page Language="C#" Debug="true" %>
    or:
    2) Add the following section to the configuration file of your application:
    <configuration>
       <system.web>
           <compilation debug="true"/>
       </system.web>
    </configuration>
    +Note that this second technique will cause all files within a given application to be compiled in debug mode.
    The first technique will cause only that particular file to be compiled in debug mode.+
    +Important: Running applications in debug mode does incur a memory/performance overhead.
    You should make sure that an application has debugging disabled before deploying into production scenario.+
    Stack Trace:
    InvalidCastException: Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.
       +CrystalDecisions.Enterprise.WebContent.WebSamples.DataSources.Common.datasourceInfoFromReports(ArrayList reports) 226
       +CrystalDecisions.Enterprise.WebContent.WebSamples.DataSources.Datasources.Main() 1821
       +ASP.websamples_datasources_datasources_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) 531
       +System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) 98
       +System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) 20
       +System.Web.UI.Page.Render(HtmlTextWriter writer) 26
       +System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) 25
       +System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) 121
       +System.Web.UI.Control.RenderControl(HtmlTextWriter writer) 22
       +System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 2558
    Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
    Any information on how I can fix this is greatly appreciated.
    Regards
    Paul
    Edited by: Paul Griscti on Sep 3, 2008 2:52 AM

    I'd try creating a new Application Pool just for running businessobjects and crystalreportviewers11 and nothing else. 
    Although the apps are .NET, it uses COM Interop for functionality, so using a common app pool with other versions will collide.
    Beyond that - if you have a SAP Business Objects support contract - you might open a new SAP Incident ticket.
    Sincerely,
    Ted Ueda

  • I am unable to see Object list selector in SE80 TCode in SAP 4.7

    I am unable to see Object list selector in SE80 TCode in SAP 4.7. i'll be thankful if someone can help me out in this regards.
    Thanks in Avd.
    Edited by: Azeez Azam on Aug 30, 2010 2:14 PM

    If you are still experiencing problems after checking your settings, you may need to update your SAP GUI patch. This solved my problem when I couldn't see the object list selector.

  • Failed to load servlet Class: MyServletIgnoring: unable to load class:java.

    Hi,
    I am using WebLogic Server 10.0, i deployed my application in that.
    It is giving the below error:
    Failed to load servlet Class: MyServletIgnoring: unable to load class:java.lang.
    ClassNotFoundException: Class bytes found but defineClass()failed for: 'MyServle
    If it is the wrong place(forums category), please do ignore.
    Plz help me out..........

    Probably not the right forum. But you have the honour of being the first person to ask a specific WebLogic Server question here.
    The BEA dev-2-dev site still seems to be active. Try here hunting for a category here: http://forums.bea.com/index.jspa
    -steve-

  • Unable to launch Object Wizard from Agentry Connector Studio

    I am running Eclipse Juno (64-bit) with the Agentry Editor installed. When I try to launch the Object Wizard in the Agentry Connector Studio nothing happens. No error message, but the wizard doesn't appear. I am using version 6.0.46.0 of the Agentry editor.
    This problem was reported in this thread but no resolution was provided. I did try opening the database development perspective as Welly suggested but it made no difference.
    Unable to launch Object Wizard from Agentry connector studio..
    Anyone know why this would happen, or if there is a log that might contain an entry that would tell me what went wrong?
    Update: I just tried it again after rebooting Windows and now the Object Wizard is grayed out when using the Database Development Perspective. If I switch to the Agentry(Properties) perspective it is not grayed out but still nothing happens when I select it.
    Full disclosure: I am running Windows in VMWare Fusion on a Mac. I am seeing some strange behavior in general with Eclipse and I've reinstalled it a number of times without resolving the problem.
    Thanks,
    Dave

    One of the applications I have issue issues if you export the application you will not be able to load it on any other editor except from the the editor running on the Fusion VM machine and the issue was also the server failed to load the application that was published from the editor. 
    I am just letting you know to look see if you also run into this issue and that was the reason why then had to run on a windows machine.
    Stephen.

  • Unable to flush SharedObject with OSX v10.9.2

    Why do I get this error message "Error #2130: Unable to flush SharedObject." when trying to use shared objects with OSX vesion 10.9.2 and not on earlier OS versions? Can this problem be fixed?

    Welcome to Apple Discussions.
    Have you run Software Update? If not, you should and install the updates suggested. Note whether there is an HP printer driver update amongst the suggested updates. If there is, go ahead and let SU do the update for you. You should have your printer connected and switched on throughout this process.
    After this go to System preferences/Print & Fax and see whether your printer is listed. If it is there might be 2 mentions - one for FAX the other for print.
    Let's know what all this shows.
    Neville

  • Getting an Exception Unable to create Object

    I have the following methos I am getting the unable to create the file exception
    I believe the problem is when is trying to read the object I try the following
    record.setMessage(input.readObject().toString());
              ///  record = (Message)input.readObject();1) convert the object to a string
    record.setMessage(input.readObject().toString()); 2) I also try this
    record = (Message)input.readObject()Notice that I put the put the file into the cryptpText area and then I get into a String
    cipherTextString = record.toString();
             //put string in JTextArea
              cipherTextArea.setLineWrap(true);
              cipherTextArea.setText(cipherTextString); Here is the setMessage Method in the Message class
    set
    public void setMessage(String eMessage)
         myMessage = eMessage;
    public void performStartTask()
            //choose the file to open
            int returnVal;
            String inputFileName = "";
            //open a JFileChoose
            JFileChooser chooser = new JFileChooser(new File (
                    "C:\\Java_code\\java_files"));
            chooser.setDialogTitle("Please select an encoded file");
            returnVal = chooser.showOpenDialog(null);
            if(returnVal == JFileChooser.APPROVE_OPTION)
                inputFileName = chooser.getSelectedFile().getName();
            //Open the file
            ObjectInputStream input  = null;
            //exception handlig here
            try
                input = new ObjectInputStream( new FileInputStream("C:\\Java_code\\java_files\\" + inputFileName));
              catch (IOException e)
                  System.err.println("error opening the file");
              //read from the file
            record = null;
            record = new Message();
            try
               record.setMessage(input.readObject().toString());
              ///  record = (Message)input.readObject();
             catch(EOFException eofe)          
                 return;
             catch(ClassNotFoundException cnfe)
                      System.err.println("Unable to create Object");
             catch(IOException ioe)
                 System.err.println("Error reading from file ");
             } // end try catch
           System.out.println("Just read in" + record + "." + record.getShift());
             //put the file into the cryptpText area
             //first - get into a string
             cipherTextString = record.toString();
             //put string in JTextArea
              cipherTextArea.setLineWrap(true);
              cipherTextArea.setText(cipherTextString);
             closeFile(input);
              startBoolean = true;
        } // End of performedStartMethod 

    Ok I added this piece of code, hope is right
    catch (Exception e) {
              StackTraceElement[] stack = e.getStackTrace();
                String exception = "";
               for (StackTraceElement s : stack) {
            exception = exception + s.toString() + "\n\t\t";
        System.out.println(exception); anf it shows that the error is here
    record.setMessage(input.readObject().toString());
    java.net.URLClassLoader$1.run(URLClassLoader.java:366)
              java.net.URLClassLoader$1.run(URLClassLoader.java:355)
              java.security.AccessController.doPrivileged(Native Method)
              java.net.URLClassLoader.findClass(URLClassLoader.java:354)
              java.lang.ClassLoader.loadClass(ClassLoader.java:423)
              sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
              java.lang.ClassLoader.loadClass(ClassLoader.java:356)
              java.lang.Class.forName0(Native Method)
              java.lang.Class.forName(Class.java:264)
              java.io.ObjectInputStream.resolveClass(ObjectInputStream.java:622)
              java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1593)
              java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1514)
              java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1750)
              java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1347)
              java.io.ObjectInputStream.readObject(ObjectInputStream.java:369)
              lab01recheverri.Lab01recheverri.performStartTask(Lab01recheverri.java:172)
              lab01recheverri.Lab01recheverri.actionPerformed(Lab01recheverri.java:103)
              javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2018)
              javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2341)
              javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:402)
              javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:259)
              javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:252)
              java.awt.Component.processMouseEvent(Component.java:6505)
              javax.swing.JComponent.processMouseEvent(JComponent.java:3321)
              java.awt.Component.processEvent(Component.java:6270)
              java.awt.Container.processEvent(Container.java:2229)
              java.awt.Component.dispatchEventImpl(Component.java:4861)
              java.awt.Container.dispatchEventImpl(Container.java:2287)
              java.awt.Component.dispatchEvent(Component.java:4687)
              java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4832)
              java.awt.LightweightDispatcher.processMouseEvent(Container.java:4492)
              java.awt.LightweightDispatcher.dispatchEvent(Container.java:4422)
              java.awt.Container.dispatchEventImpl(Container.java:2273)
              java.awt.Window.dispatchEventImpl(Window.java:2719)
              java.awt.Component.dispatchEvent(Component.java:4687)
              java.awt.EventQueue.dispatchEventImpl(EventQueue.java:703)
              java.awt.EventQueue.access$000(EventQueue.java:102)
              java.awt.EventQueue$3.run(EventQueue.java:662)
              java.awt.EventQueue$3.run(EventQueue.java:660)
              java.security.AccessController.doPrivileged(Native Method)
              java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
              java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:87)
              java.awt.EventQueue$4.run(EventQueue.java:676)
              java.awt.EventQueue$4.run(EventQueue.java:674)
              java.security.AccessController.doPrivileged(Native Method)
              java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
              java.awt.EventQueue.dispatchEvent(EventQueue.java:673)
              java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:244)
              java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:163)
              java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
              java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:147)
              java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:139)
              java.awt.EventDispatchThread.run(EventDispatchThread.java:97)
    Just read innull.0

  • Why can't get the object "out" in this way?

    We use "PrintWriter out=response.getWriter()"to get a "out" object in Servlet and output text to webbrowser with it.But I think the PrintWriter is a class and Why can't I get the object "out" use this way:"PrintWriter out=new PrintWriter()"?I think the later is easier to understand.Anyone can help me?

    I check the Servlet API.The PrintWriter has a constructor with a abstract object Writer as it's parameter.I couldn't create the Writer object so I can't create the out object.Why it's constructor is protected by java?

  • Suddenly unable to drag objects

    I installed Muse 2 days ago and I've had 3-4 instances where everything will work perfectly and suddenly I'm unable to drag objects. I can select and re-size them, so the objects aren't locked, but I can't drag and re-position anything (text, boxes, etc.). If I exit out of the program and re-open it, the problem is temporarily fixed (until it happens again after ~30 minutes of use).
    Does anyone else have this problem? Is it a bug or am I repeatedly & accidentally toggling some feature that I'm unaware of?

    Yup that's a bug. From what we can tell, something goes wrong on one drag operation and after that, we can't start another drag. Quit and relaunch is the only alternative.
    So far we don't have any reproducible cases to help us track this down, since it happens to you fairly regularly any information you can provide would be helpful: Mac or Windows?
    What sort of drag was the last one to succeed before they stopped working, and what was the first to fail? Reposition something, drag in an image to load the place gun, etc...
    Thank you and sorry for the inconvenience...

  • Unable to retrieve Object.  Failed to load database information

    I am getting the following error when trying to run my reports from Crystal XI with SQL Server 2005.
    CrystalReportViewer
    Error in File 180+DAYREP.EWARP: Failed to load database information.
    Unable to retrieve Object.
    Error in File 180+DAYREP.EWARP: Failed to load database information.
    I have done some research on this but no luck on resolving the issue.
    Any suggestions are welcome thanks.

    First thought is that the application cannot access the DSN or database driver that the report was designed on, this could be permissions.
    I tried to ping my database and was unable to find the host.  I was under the assumption it was using TNSNames which is able to resolve. 
    How can I validate the permissions?
    As I said I'm a little lost here.  Apologies if I ask stupid questions.

  • CrystalReportViewer Failed to Open the connection Unable to retrieve Object

    I am getting the following Error on trying to view a report in the CMC and the Infoview.
    CrystalReportViewer
    Failed to Open the connection. ReportName
    Unable to retrieve Object.
    Failed to open the connection. ReportName
    I have recently re-installed Crystal Reports Server XI  on a server after a disk failure. I had a backup of my CMS database. I reinstalled the Crystal Servwer without atttaching this database, however crystal did not create a new db so I attached my old one.
    I have deleted all my old ODBC connections and recreated them with new names and then reconnected my reports in Crystal Reports XI using the "Set Datasource Location" option and the report works fine.But as soon as I try to view it after uploading it as an object onto the server, I get the above error.
    Any help would be appreciated.

    I am tagging into this unanswered question as well because I think I have a similar issue.  In my case I have a report which runs correctly in Crystal Reports designer but when I move it to the scheduler it fails on a "Failed to connect" to the report.  In have used "Set data location" to no avail.  When I go to Admin Tools and look at the complete list of datasources for all my reports this particular datasource is listed twice.  The group of reports under one of the datasources works correctly.  The reports listed under the second datasource all fail.  The two datsources are spelled exactly the same and when I sompare the database details for a successfull and a failing report using this datasource they are the same (in the console and in infoview).
    I have also checked the ODBC connections on the Crystalserver and there is only one occureence.
    Any ideas?
    Thanks!

  • E5 - unable to open. object type not supported

    hi. 
    2 Month back i brought Nokia E-5 Mobile and after few weeks i upgraded the Memory from 2Gb to 8GB. After copying all files from 2gb to 8gb am not able to open or install any existing programs and files. Even maps are not working. When trying to open or install the files am getting this erro " unable to open object type not supported " . Kindly help on this error.
    Thanks
    Velavan

    I have never attempted what you did, so can't say for certain, but I don't think memory card data is meant to be copied from one card to another (unless we're talking about data files like pictures or mp3's).  I don't understand what you mean by being unable to install files.  Are you trying to reinstall the programs that aren't working?  If your 2GB card still works normally, I suggest you format the 8 GB card, reinstall the programs to the empty card, and re-download the maps data.  If the programs still give you trouble, you may need to uninstall them from the 2 GB card first, but I don't think that should be necessary.  I hope that helps.

Maybe you are looking for

  • Installer doesn't detect all instances

    I have 2 separate Oracle 8.0.5.1 instances running on a RedHat 6.0 server (2.2.10ac12). During the installation of 8i, the Universal Installler detects only one of the databases, not both. Both databases are the result of my own doing. Both instances

  • How to identify reports that are using a specific universe object?

    Any idea how to use BO Auditor or Metadata Manager to identify webi reports that are using a specific universe object or universe prompt in the report SQL?

  • Use of keyboard

    Hello, My name is Gunner Hodgson and I recently started using a Macbook Pro. To start with, I would like to say that I love it. I also purchased the Apple Pro Keyboard, because as a student I have to type 10 page essays and I don't want to get carpel

  • SQL Loader error: SQL*Loader-926. Please help

    Hi, While loading some files to my database table, I am getting the following error. I am using 'Truncate' option while loading the file: Error: ==== SQL*Loader-926: OCI error while executing delete/truncate (due to REPLACE/TRUNCATE keyword) for tabl

  • Replace both Supervisor Engines on Cisco VSS pair

    Hi , I have a VSS pair with one SUP on each switch , I'm preparing for a task to replace  SUP on Switch 1 , and switch 2  , I'm trying to see what are my options to do this task ,  option1 : replace the SUP on both switches at the same time and built