QTP unable to identify objects in a flex application

Hi,
I am having an application that runs on flex 3.6 SDK. I am trying to automate the same using QTP 10.0, but, I am unable to identify the objects. I have installed the Flex 4.5 add-in, but still unable to recognize objects.
Upon browsing some forums, i found that I need to compile the files "automation.swc, automation_agent.swc, automation_dmv.swc, qtp.swc, automation_flashflexkit.swc" by including them in <include-libraries> ...</include-libraries> tags in "flex-config.xml" file present under "C:\Program Files\Adobe\Flex Builder 3 Plug-in\sdks\3.6.0\frameworks". We did that, but still, not able to identify objects.
It would be of great help to me if any some one could tell if I am missing out anything ?

hello,
not only need the objects be enclosed by their parent frame, but they also need to be "on top of it" ... meaning if you imagine your report layout as a set of layers that you look at from the side, your "layout surface" would be the bottom most layer and then all objects would be layered on top of each other. in this view, only objects that are in layers above a particular frame can become its children. after that the relationship is determined whether or not an object is inside a frame or not.
you might want to check your object navigator to see whether or not the particular objects are actually in the right place in the hierarchy.
thanks,
ph.

Similar Messages

Codedui: Unable To Identify Objects Inside The Virtual Machine

Hi
We are unable to identify objects inside the virtual machine. We want to perform some tasks inside the virtual machine. The virtual machine object is getting identified as image. So when we perform tasks like creating a folder or opening any application
inside that virtual machine, all actions are recorded as image.Need help on this ASAP.
Thanks

Hi Haripriya78,
Thank you for posting in MSDN forum.
>>Codedui: Unable To Identify Objects Inside The Virtual Machine
Based on your issue, could you please tell me what operation you do and then get the error message?
Whether you record and run this coded UI test and then get the error message?
If possible, please tell me more detailed message about this issue.
Generally, I know that if you want to identify objects for coded UI test, I know that the
recorder needs to be present in the machine on which you are trying to record actions.
For more information, please refer the Vinoth's suggestion to check this issue.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/1b7a328d-a9b6-48a6-9cb9-8ff8ac7dd435/codedui-unable-to-identify-objects-inside-the-virtual-machine?forum=vsautotest
If I misunderstanding your issue, please tell me more message about your issue so that we will further help you support this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

UFT 12.01-Unable to Identify objects inside grid table

We are automating a Window based application using UFT 12.01.
The Product and UFT Tool are installed in Client Network-Desktop and we are accessing through VPN connectivity.
Technology stack of the application are
.Net Framework 4.0
IIS6.0 or greater
Sql Server 2008 R2
DevExpress V11.2 (UI & Reports)
Janus Controls (UI)
AutoMapper used within Interfaces
Ciloci.Flee used for expression builder
Autofac used of IOC cache
The grid table is identified as SwfObject and its dynamic table. Hence we can’t perform any table operations inside table like get row() , get celldata() etc.,.We need to capture edit box inside a row which is enabled on clicking the particular row.
How to Identify objects inside Grid table

Hello again,
Here you are the DDL of the offending table:
CREATE TABLE "DBADMEX"."T50SEC82"
"COD_EMPRESA" CHAR(4 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"COD_EMPR_CONT" CHAR(4 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"COD_SECT_CONT" CHAR(2 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"NUM_CUEN_CONT" CHAR(18 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"COD_PAIS" CHAR(4 BYTE) DEFAULT ' ' NOT NULL ENABLE,
"COD_SECTOR" CHAR(6 BYTE) DEFAULT ' ' NOT NULL ENABLE
PCTFREE 10 PCTUSED 40 INITRANS 50 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE
INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "TS_50" ;
CREATE UNIQUE INDEX "DBADMEX"."I5000082" ON "DBADMEX"."T50SEC82"
"COD_EMPRESA", "COD_EMPR_CONT", "COD_SECT_CONT", "NUM_CUEN_CONT"
PCTFREE 10 INITRANS 50 MAXTRANS 255 COMPUTE STATISTICS STORAGE
INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT
TABLESPACE "TS_50" ;
We are using the following versions:
Oracle database: 11.1.0.7.0
Oracle Client: 11.2.0.1.0
Windows (where the client runs): XP SP3 (version 5.1 Build 2600_spsp_sp3_gdr.080814-1236) in spanish.
SQL Developer: 2.1.1.64 (MAIN-64.45)
I think I haven't forgotten anything.
Thanks in advance for your help!

Openscript - adf unable to identify object value

Hi Everyone,
Please find the screenshot in the below shared link, where the adf inputtext object value is not identified while doing object test.
https://docs.google.com/file/d/0B0qqXKChgAG1VkRmR1Y0eEYyQlE/edit?usp=sharing
Kindly suggest on this whether it is a bug .
Regards,
Mohan.

Can we also get a screenshot of all the read-only attributes of that object?

QTP not recognizing flex application while execution..but records fine

Dear forum members, Am facing a issue with QTP & Flex. Appreciate if any one could help out with any solutions for the issue.
Issue:
QTP 11 & Flex application
While recording QTP identifies the flex application and records the steps
Browser("QuikViewWeb").FlexApplication("app").FlexApplication("QuikVie wWeb.swf").FlexCanvas("ManageViewContainerCanvas").FlexBox("index:3"). FlexCanvas("Devices").FlexButton("popUpButton").Click
Browser("QuikViewWeb").FlexApplication("app").FlexApplication("QuikVie wWeb.swf").FlexCanvas("ManageViewContainerCanvas").FlexBox("index:3"). FlexCanvas("Devices").FlexList("criteriaList").FlexCanvas("[ ] Samsung").FlexCheckBox("Samsung").Click
Browser("QuikViewWeb").FlexApplication("app").FlexApplication("QuikVie wWeb.swf").FlexCanvas("ManageViewContainerCanvas").FlexBox("index:3"). FlexCanvas("Devices").FlexButton("Okay").Click
But after I record and try to playback the script, QTP does not recognize the flex objects. It fails to identify "FlexApplication("app")" object
Anyone faced this kind of issue? Any solution for this issue?
I'm using Win 7, 64 Bit, QTP 11 & Flex 4.5 Plugin for HP QuickTest Pro
Please let me know if any more info is needed.
Regards
Nishar Ahmed

Hi Nishar,
I am facing the same problem. Did you find a solution to this?
Regards

Unable to retrieve Object. Failed to load database information

I am getting the following error when trying to run my reports from Crystal XI with SQL Server 2005.
CrystalReportViewer
Error in File 180+DAYREP.EWARP: Failed to load database information.
Unable to retrieve Object.
Error in File 180+DAYREP.EWARP: Failed to load database information.
I have done some research on this but no luck on resolving the issue.
Any suggestions are welcome thanks.

First thought is that the application cannot access the DSN or database driver that the report was designed on, this could be permissions.
I tried to ping my database and was unable to find the host. I was under the assumption it was using TNSNames which is able to resolve.
How can I validate the permissions?
As I said I'm a little lost here. Apologies if I ask stupid questions.

Unable to identify the exchange protocol of the message (sync AS2 MDN)

Hi,
We got the following error:
Description: Unable to identify the exchange protocol of the message
StackTrace:
Error -: AIP-50080: Exchange protocol identification error
 at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1367)
 at oracle.tip.adapter.b2b.msgproc.Request.postTransmit(Request.java:2370)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1813)
 at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
 at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1152)
 at oracle.tip.adapter.b2b.xmlgwIntg.XMLGWIntegration.raiseOutboundMessage(XMLGWIntegration.java:168)
 at oracle.tip.adapter.b2b.xmlgwIntg.Outbound.onMessage(Outbound.java:297)
 at oracle.jms.AQjmsListenerWorker.dispatchOneMsg(AQjmsListenerWorker.java:316)
 at oracle.jms.AQjmsListenerWorker.run(AQjmsListenerWorker.java:129)
 at java.lang.Thread.run(Thread.java:534)
Here is the Wire message (sync MDN)
=======================
Message-ID=<23033756.391232032071968.JavaMail.SYSTEM@INUBITTEST>
Subject=Your ORDERS AS2
[email protected]
Content-Length=1347
MIME-Version=1.0
Server=Apache
Date=Thu, 15 Jan 2009 15:07:52 GMT
Content-Type=multipart/mixed; boundary="----=_Part_53998_23619909.1232032071968"
[email protected]
------=_Part_53998_23619909.1232032071968
Content-Type: text/plain; charset=UTF-8; name=test.txt
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=test.txt
Message-ID: <17080722.371232032071906.JavaMail.SYSTEM@INUBITTEST>
MIME-Version: 1.0
Content-Type: multipart/report; report-type=disposition-notification;
 boundary="----=_Part_53997_14786767.1232032071906"
AS2-Version: 1.1
AS2-From: test_AS2
AS2-To: as2me
------=_Part_53997_14786767.1232032071906
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
MDN for Message ID: <33156:4:0:137@as2me>
From: as2me
To: test_AS2
Received on: Thu, 15 Jan 2009 16:07:51 +0100
Status: processed
Comment: This is not a guarantee that the message has
been completely processed or unterstood.
------=_Part_53997_14786767.1232032071906
Content-Type: message/disposition-notification
Content-Transfer-Encoding: 7bit
Reporting-UA: inubit Integration Server
Original-Recipient: rfc822; test_AS2
Final-Recipient: rfc822; test_AS2
Original-Message-ID: <33156:4:0:137@as2me>
Disposition: automatic-action/MDN-sent-automatically; processed
Received-Content-MIC: 5kFOLMXOUurpm6DUTA8IMRj5gcs=, sha1
------=_Part_53997_14786767.1232032071906--
------=_Part_53998_23619909.1232032071968--
============================
The communication with our TP is going well, we are able to send, receive messages over AS2 and send back MDN, but we are not able
to receive their MDN.
Edit:
It seems that after the latest MLR patch, the error changed to [IPT_HttpSendError] HTTP encounters send error :. Premature EOF encounter but the roots seem to lead to the problem with MDN as B2B is sending the message a couple of times now and gives the mentioned EOF error.
Please advise,
Thank you
Edited by: Kamil Zadora on Jan 30, 2009 3:44 AM

Hi Ramesh,
Yes, agreement uses AS2 IDentifiers. Incoming messages are recognized correctly, and we send back sync MDN that is correctly received by our TP. They also recieve our messages correctly although Oracle B2B does not recognize the MDN from them. I think that this causes that, now after applying the latest MLR patch, B2B tries to send it around 6 times and gives the Unexpected EOF error.
Thank you for your help in advance,
Kind regards,

CrystalReportViewer Failed to Open the connection Unable to retrieve Object

I am getting the following Error on trying to view a report in the CMC and the Infoview.
CrystalReportViewer
Failed to Open the connection. ReportName
Unable to retrieve Object.
Failed to open the connection. ReportName
I have recently re-installed Crystal Reports Server XI on a server after a disk failure. I had a backup of my CMS database. I reinstalled the Crystal Servwer without atttaching this database, however crystal did not create a new db so I attached my old one.
I have deleted all my old ODBC connections and recreated them with new names and then reconnected my reports in Crystal Reports XI using the "Set Datasource Location" option and the report works fine.But as soon as I try to view it after uploading it as an object onto the server, I get the above error.
Any help would be appreciated.

I am tagging into this unanswered question as well because I think I have a similar issue. In my case I have a report which runs correctly in Crystal Reports designer but when I move it to the scheduler it fails on a "Failed to connect" to the report. In have used "Set data location" to no avail. When I go to Admin Tools and look at the complete list of datasources for all my reports this particular datasource is listed twice. The group of reports under one of the datasources works correctly. The reports listed under the second datasource all fail. The two datsources are spelled exactly the same and when I sompare the database details for a successfull and a failing report using this datasource they are the same (in the console and in infoview).
I have also checked the ODBC connections on the Crystalserver and there is only one occureence.
Any ideas?
Thanks!

E5 - unable to open. object type not supported

hi.
2 Month back i brought Nokia E-5 Mobile and after few weeks i upgraded the Memory from 2Gb to 8GB. After copying all files from 2gb to 8gb am not able to open or install any existing programs and files. Even maps are not working. When trying to open or install the files am getting this erro " unable to open object type not supported " . Kindly help on this error.
Thanks
Velavan

I have never attempted what you did, so can't say for certain, but I don't think memory card data is meant to be copied from one card to another (unless we're talking about data files like pictures or mp3's). I don't understand what you mean by being unable to install files. Are you trying to reinstall the programs that aren't working? If your 2GB card still works normally, I suggest you format the 8 GB card, reinstall the programs to the empty card, and re-download the maps data. If the programs still give you trouble, you may need to uninstall them from the 2 GB card first, but I don't think that should be necessary. I hope that helps.

Unable to Import objects into ID

Hi All,
For your support I have completed the development work and I have moved to Quality from Development. But while trying to import the one scenario in to Quality System from Development in XI, I am getting the following Error:-
Internal error: Unable to transfer changes for object Service | Q14CLNT120 to change list "XI 3.0 Import" (9a590f30-7245-11dc-9266-00306ee97ef1) since object still in change list "XI 3.0 Import" (3ae5e660-701d-11dc-942e-00306ee97ef1)
I have somehow managed to import another scenario last week into Quality, although now I am unable to import. But while trying to activate the imported scenario into Quality System I am getting another Error as below:-
Unable to move object. Change lists were not part of the same import
I tried to activate the change list..but no woek.
Could anyone please advice?
BR
Soumya

Have you checked the GUID in SLD in both the systems?
SLD-->Software Components, to check the GUID.
You can do one thing, first of delete imported objects which are not getting activated from QA, also delete the SWCV from Integration Repository.
Note: Before deleting SWCV, make sure any other working objects are not there in the same SWCV.
Now, if SWCV & GUID in both systems are same then again:
1. Export the objects from Dev (.tpz file)
2. Imort the same .tpz file to QA system.
Now go to Repository of QA and
1. Tools --> Import Design Objects
2. Tools --> Transfer from system landscape Directory --> Update Application Components.
Select your components and press Finish button.
And finally try to Acitvate your objects.
Regards,
Sarvesh
*****Reward points, if found helpfull.

Adobe creative suite cs5: unable to open files in photoshop. unable to drag objects on illustrator..

Adobe creative suite cs5: unable to drag objects on illustrator or indesign. unable to open files in photoshop, brush doesnt work in photoshop.
In the past I uninstalled adobe creative suite cs5 from my laptop, used the adobe creative cloud cleanup tool, restarted and then reinstalled the programs and everything worked again for about a week. Now everything has gone back to the way it was again and this time the uninstalling and reinstalling isnt helping.
Any ideas?
Im pretty desperate!!
Thanks
Alisa

Hi Alisa
I'm having exactly the same problem. Uninstalled CS4 and reinstalled the 30 day trial of the Creative Cloud and it's stil having the same glitches, not opening in photoshop and not being able to drag/move objects in Illustrator or inDesign.
Did you find a solution to this problem?
Thanks
Jenny

Unable to rename objects

In the OMWB, I am unable to rename objects. For example, in the Source Model under the Views folder, I have a view whose name is 100 characters long. I want to rename it to a 30 character name (something meaningful and not system generated.) The on-line help says to use the menu to click on Object > Rename, but that is grayed-out. The only available options are delete and parse. Both of those work, by the way.
I just downloaded and installed OMWB last Thursday, so this is latest version of software. I also got the SQL Server 2000 plug-in, and it's installed correctly because I have been successful at migrating SQL Server 2000 to Oracle 10g.

Hi Mark,
You are quiet correct. The OMWB does not allow you to rename schema objects in the Source Model. The only objects which can be renamed manually are tablespaces and users in the Oracle Model.
The workaround is to rename the view inside the Oracle Model PL/SQL editor. Then your view with get generated with the choosen name.
I have found the following in the OMWB help
"You can customize the Oracle Model by: Creating, deleting, and renaming objects "
This will be logged as a bug as not all objects can be renamed. Could you provide a link to the on-line help document which states "click on Object > Rename" as I am having difficulty finding it, and I will add this to the bug report.
Regards,
Dermot.

Siebel database Configuration wizard unable to identify index tablespace

Hi,
I'm installing Siebel CRM 8.1.1 on AIX platform. We have RAC enabled database at backend and in that two tablespace has been created, one for data and another one for index. Now in the database configuration wizrd where we have to provide the name of both tablespaces; we provide the name of data tablespae in the Table Tablespace filed and index tablespace in the index tablespace filed of the configuration wizard. Now when we click on the next button. The configuration wizrd gives error of unable to identify index tablespace.
Why is this happening as index tablespace is properly created in the database. Please help me in this. You quick respance will be highly appriciated.
Regards,
Abbasi

I thought it might be. grantuser.sql generally needs to be modified to suit the underlying database configuration. Glad you got it working.

Troubleshooting 6th gen ipod nano "unable to identify ipod"

Just this evening I plugged my ipod in to my laptop and I continually recieve the message that says something along the lines of "unable to identify ipod". I ran through the trouble shooting tips on the support website, including new usb port, restart, uninstall-reinstall, and turning off my anti-virus. Is there something else I can do to get my computer to recognize my device? Thanks in advance for your replies.

Your problem is completely different from the original post. The OP could not run the correct version of iTunes on their older computer. You're much more likely to get the help you need by starting your own thread with a properly descriptive subject line.
If you need instructions on how to start a new thread, see this link:
http://discussions.apple.com/ann.jspa?annID=650
Best of luck.

Unable to retrieve Object.Error in File: Unknown Database Connector Error

Hi,
I have deployed two report on BO XI server. Both the reports are designed in Crystal Report designer XI.
I got all database credentilas, saved in CMC by my administrator so that these reports should not prompt me for any database login parameters when I am trying to run them from BOXI test server.
When I am running one of my report, the report is working fine. But this is not the case with other report.
This second report is working well with some inputs.
Case 1 - It is having to input date parameter(Date1 and Date2), when I am entering one input date parameter (Date1) and other (Date2) is set to NULL, it is displaying correct result. But when I am giving any date for Date2 it is throwing me an error -
"Error in File Manager_Agent_Report.rpt: Unknown Database Connector Error
Unable to retrieve Object.
Error in File Manager_Agent_Report.rpt: Unknown Database Connector Error "
Case 2 - Similiarly it is having an other input field which I am using in filetering the records in Report.
If I am setting it to NULL or If I am not giving this field, while entering the input. I am getting an output.
But incase I am giving this particular field then again it is promptig me the above mentioned error.
The report are working fine if I am executing them from crystal report designer.
Please help me to find a solution for the same.
Thanks
Deepak

Deepak, firstly are you trying to connect to one database or two in these reports? I would check the ODBC connections both in server and client machine (testing server or whatever you testing it on). Make sure both connection settings are exactly the same.
Secondly I will check the parameters values under Objects under the CMC and see if there is anything changed there.
Report back if you have checked both and it still giving errors
Regards
Jehanzeb

QTP unable to identify objects in a flex application

Similar Messages

Maybe you are looking for