ServletRequest.getScheme does not return https

          I invoke my servlet with the url https://{server}/MyServlet. When i call the request.getScheme()
          in my doGet of the servlet, I m getting http instead of https. Any help will be
          appreciated. Thanks in advance.

Do you have a WL proxy in front of the WLS?
          Peace,
          Cameron Purdy
          Tangosol Inc.
          << Tangosol Server: How Weblogic applications are customized >>
          << Download now from http://www.tangosol.com/download.jsp >>
          "Raj" <[email protected]> wrote in message
          news:3ba3eaf1$[email protected]..
          >
          > I invoke my servlet with the url https://{server}/MyServlet. When i call
          the request.getScheme()
          > in my doGet of the servlet, I m getting http instead of https. Any help
          will be
          > appreciated. Thanks in advance.

Similar Messages

MapViewer.getGeneratedImaegURL() does not return https for SSL mapviewers

We've setup a SSL mapviewer with an https:// URI but MapViewer.getGeneratedMapImageURL returns http://uri:7002 instead of https://uri:7002
This is easy enough to fix by testing if the getServiceURL starts with "https" and testing the start of getGeneratedMapURL and then replacing the "http:" with "https:" but it's a bug so we're reporting it here.
Thanks, Mark

Hi Mark,
thanks for your note. We will look it.
Joao

Res.getPathTranslated() does not return correct URL of the page requested

Hi,
The res.getPathTranslated() statement in the below code (in doFilter method) does not return the correct URL of the requested webpage.
Whenever a web page is accessed using a return statement (eg : return "nextPage"; ) inside a button's action method or a hyperlink's action method, the res.getPathTranslated() returns the URL of the current webpage instead of returning the URL of the webpage that is actually requested.
For example if there is a button on the page http://localhost:29080/MyJaas/faces/firstPage.jsp
And the button_action() is as follows
button_action()
return "nextPage";
The res.getPageTranslaged() returns "http://localhost:29080/MyJaas/faces/firstPage.jsp" instead of "http://localhost:29080/MyJaas/faces/nextPage.jsp"
However, if the webpage is requested by populating the URL property of the hyerlink in creator IDE, the res.getPathTranslated() returns the correct (requested) web page.
How to make res.getPathTranslagted() return the correct URL when the webpage is accessed from hyperlink's / button's action method?
I know that the explation is not very clear, so please bear with me. Let me know if you need more clarificatons. Thanks in advance for showing interest in this issue.
And by the way, the code below is the same as that used in Jaas Authentication tutorial :- http://developers.sun.com/prodtech/javatools/jscreator/reference/techart/2/jaas_authentication.html
package jaasauthentication;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.http.HttpSession;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class SecurityFilter implements Filter{
    /** Creates a new instance of SecurityFilter */
    private final static String FILTER_APPLIED = "_security_filter_applied";
    public SecurityFilter() {
    public void init(FilterConfig filterConfig) {
    public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws java.io.IOException, ServletException{
        HttpServletRequest req = (HttpServletRequest)request;
        HttpServletResponse res = (HttpServletResponse)response;
        HttpSession session = req.getSession();
        String requestedPage = req.getPathTranslated();
        String user=null;
        //We dont want to filter certain pages which include the Login.jsp/Register.jsp/Help.jsp
        if(request.getAttribute(FILTER_APPLIED) == null) {
            //check if the page requested is the login page or register page
            if((!requestedPage.endsWith("Login.jsp")) && (!requestedPage.endsWith("Register.jsp")) && (!requestedPage.endsWith("Help.jsp"))){
                //Requested page is not login.jsp or register.jsp therefore check for user logged in..
                //set the FILTER_APPLIED attribute to true
                request.setAttribute(FILTER_APPLIED, Boolean.TRUE);
                //Check that the session bean is not null and get the session bean property username.
                if(((jaasauthentication.SessionBean1)session.getAttribute("SessionBean1"))!=null) {
                    user = ((jaasauthentication.SessionBean1)session.getAttribute("SessionBean1")).getUsername();
                if((user==null)||(user.equals(""))) {
                    res.sendRedirect("Login.jsp");
                    return;
        //deliver request to next filter
        chain.doFilter(request, response);
    public void destroy(){
}

Guys any solution for the above problem?
Right answer fetches 10 duke dollars..

Server does not return metadata, check the query.

Hi,
I need your help in using report designer of Bex, The issue is when we try to open a query in the report designer we get a Error Server does not return metadata, check the query.
Thanks in Advance
Kind Regards
Phutane

Hi,
All the yellow and red lights will have an effect on query performance or execution. Read up on them as there are too many to explain via this forum.
There is a document on SDN on query performance. Some useful links:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9f4a452b-0301-0010-8ca6-ef25a095834a]
[http://help.sap.com/saphelp_nw70/helpdata/en/41/b987eb1443534ba78a793f4beed9d5/frameset.htm]
[http://help.sap.com/saphelp_nw70/helpdata/en/d9/31363dc992752de10000000a114084/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/2e/caceae8dd08e48a63c2da60c8ffa5e/frameset.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0501cb9-d51c-2a10-239c-c141a22c45a6]
Cheers...

Server does not return query metadata check the query

hi,
i want know how to use bex query designer,
when i insert a data provider,the message is appear "server does not return query metadata check the query",
who can help me ?
thanks a lot !
addition: my current entironment is: gui710 with sp4,bi710 with sp2.

Hi,
All the yellow and red lights will have an effect on query performance or execution. Read up on them as there are too many to explain via this forum.
There is a document on SDN on query performance. Some useful links:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9f4a452b-0301-0010-8ca6-ef25a095834a]
[http://help.sap.com/saphelp_nw70/helpdata/en/41/b987eb1443534ba78a793f4beed9d5/frameset.htm]
[http://help.sap.com/saphelp_nw70/helpdata/en/d9/31363dc992752de10000000a114084/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/2e/caceae8dd08e48a63c2da60c8ffa5e/frameset.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0501cb9-d51c-2a10-239c-c141a22c45a6]
Cheers...

Xquery does not return any results on 10.2.0.4, does work on 10.2.0.5

I have a Xquery statement that works as expected on Oracle 10.2.0.5 but does not return any results on Oracle 10.2.0.4.
Is this the result of a badly written query? A bug in 10.2.0.4?
Is there a way to rewrite the query so that is does work on 10.2.0.4?
Testcode:
declare
   l_xml xmltype;
   -- Select layers with TileMatrixSet EPSG:28992
   cursor c_layer(p_xml xmltype) is
      select t.*
        from xmltable(xmlnamespaces(default 'http://www.opengis.net/wmts/1.0'
                                   ,'http://www.opengis.net/ows/1.1' as "ows"
                                    ,'http://schemas.opengis.net/gml' as "gml"
                                    ,'http://www.w3.org/1999/xlink' as "xlink"
                                    ,'http://www.w3.org/2001/XMLSchema-instance' as "xsi")
                      ,'for $d in //Layer[TileMatrixSetLink/TileMatrixSet="EPSG:28992"] return $d' passing
                      p_xml columns title varchar2(100) path 'ows:Title'
                      ,format varchar2(100) path 'Format'
                      ,style xmltype path 'Style') as t;
begin
   l_xml := xmltype.createxml('<?xml version="1.0" encoding="UTF-8"?>
<Capabilities xmlns="http://www.opengis.net/wmts/1.0"
xmlns:ows="http://www.opengis.net/ows/1.1"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:gml="http://www.opengis.net/gml" xsi:schemaLocation="http://www.opengis.net/wmts/1.0 http://schemas.opengis.net/wmts/1.0/wmtsGetCapabilities_response.xsd"
version="1.0.0">
<Contents>
<Layer>
    <ows:Title>brtachtergrondkaart</ows:Title>
    <ows:Identifier>brtachtergrondkaart</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
<Layer>
    <ows:Title>top10nl</ows:Title>
    <ows:Identifier>top10nl</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
<Layer>
    <ows:Title>bgt</ows:Title>
    <ows:Identifier>bgt</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
</Contents>
</Capabilities>');
   for r_layer in c_layer(l_xml)
   loop
      dbms_output.put_line(r_layer.title);
   end loop;
end;Result on 10.2.0.5:
brtachtergrondkaart
top10nl
bgt

This one's strange indeed.
I can reproduce on 10.2.0.4 and one of the following seems to fix it :
1) Specifying the column list in the SELECT, instead of t.* :
   -- Select layers with TileMatrixSet EPSG:28992
   cursor c_layer(p_xml xmltype) is
      select t.title, t.format, t.style
        from xmltable(or,
2) Using an extended FLWOR expression :
for $d in //Layer
where $d/TileMatrixSetLink/TileMatrixSet = "EPSG:28992"
return $dMaybe you've already noticed but the problem only occurs within a PL/SQL context.
The same query run from SQL is OK.

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Recently, I can't get any sound from my game applications. Sound works fine with video, streaming, etc, but not my game applications. I've tried powering down and re-booting, but the sound does not return. Can anyone help me?

Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't on the side switch is set via control centre instead : http://support.apple.com/kb/HT4085

When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box,

# Question
When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

_api/Web/Lists/GetByTitle does not return People or Group lookup value with $expands

I have a list in SharePoint 2013 with a people picker field. I am trying to retreive the list info on cient side in javascript. URL does not take lookup field display name (as stated in some articles) but it was taking AssignedPAId instead. However further
expands does not return any thing. I need to return the assigned to user name in this case.
List columns
Title
primaryowner
AssignedPA (People or Group field)
REST Query URL:
_api/Web/Lists/GetByTitle('demolist')/items?$select=Title,primaryowner,AssignedPAId/Name&$expands=AssignedPAId/Name
It keeps returning me Id only regardless i am asking /Name.
Any help on query? Please suggest a working query only. i have already googled/binged enough.........................
Moonis Tahir MVP SharePoint,MCTS SharePoint 2010/2007, MCPD.net, MCSD.net, MCTS BizTalk 2006,SQL 2005

Hi,
According to your post, my understanding is that you want to get the user name of the people picker control.
To get the user name in the people picker control, we can use the SPService to achieve it.
There is a function called
SPFindPeoplePicker , we can use this function to get the display name.
There is an article about this topic, you can refer to it.
http://sympmarc.com/2012/04/22/working-with-sharepoint-people-pickers-with-jquery-a-new-function-called-findpeoplepicker/
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

'owa_util.get_cgi_env does not return non-standard headers

'owa_util.get_cgi_env does not return non-standard headers in embedded PL/SQL gateway even when the DAD attribute "cgi-environment-list" is set to pass
such headers.
Is this information correct?

Hi,
I came across the same problem today, my current understanding of the problem confirms your suspects, but I am still investigating the matter.
If you made some progress on this, please share your thoughts.
Flavio
http://oraclequirks.blogspot.com
http://www.yocoya.com

WebI does not return failed when scheduling a report which only holds parti

WebI does not return failed when scheduling a report which only holds partial results.
We have scheduled reports which take some time to run. When they are scheduled they sometimes show successful even though the report only holds partial results. The only indication is when you open the report as webi report you see the warning that it holds partial results.
When running the report manually, it works file.
The issue is not in the no of rows in the universe settings because we this unselected. The issue is that it times out.
The reason that it times out is that a lot of resources are used for loading and processing data when the report is scheduled. When running it manually, it works because at this time the serverload is less. the time in the universe is set to 10 min.
The version we have is BOXIR2-SP4.
Ok. Issue identified.
The question is - why is the report successful when it holds partial results? If this is normal behavior, noone can really trust the scheduled reports, especially when you save it to excel and send it by mail.
Is there a solution for this except increasing the allowed query time which would not solve the issu but only allow more reports to complete?
Edited by: Karlgren Michael on Sep 17, 2009 1:22 PM

Hi ,
Currently this problem exists in XI R2. This feature will be part of thenext Service Pack i.e XI R2 SP6.
This CER will be delivered from IDC Webi and BIP Platform as part of Jupiter Sp6.
Problem Statement:
Scheduled WebI Reports which are partially refreshed are distributed to the destinations for Users to View and make decisions. These users arenu2019t usually aware that these reports have u201CPARTIAL RESULTSu201D
Recomended Solution:
Allow the Schedule Creator / Modifier to set a parameter to stop the distribution of the u201CPARTIALLY REFRESHEDu201D WebI report.
Thanks
Salini

My PC does not return to the source document I print from

I had a setting control for
this in XP but can't find the page I got it from.<o:p></o:p>
<o:p> </o:p>
In ANY application or browser
this happens. I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from. This is maddening and causes all kinds of issues.
Searching the web for this now produces nothing and I know I can't be the
only person who experiences this.<o:p></o:p>
<o:p> </o:p>
This is a Windows 7 platform
in a networked business environment. I'm running the Classic Menu add-in
from Addintools because I can't stand the ribbon and have never liked it.
In Windows 7, I'm running a couple of other add-ins that restore the XP
use of the task bar properly so one can work efficiently.<o:p></o:p>
<o:p> </o:p>
None of the add-ins are what
is causing this issue because I'd run the same Classic Menu add-in on the XP
box and it had the same issue until I found the work-around that I can't
remember now.<o:p></o:p>
<o:p> </o:p>
Has anyone else experienced
this issue?<o:p></o:p>
<o:p> </o:p>
Jeff Lynch<o:p></o:p>

Hi,
"I print from a specific Excel workbook, by example, when I
have a number of them open. The system does not return to the workbook I
printed from."
If I'm not misunderstanding, do you mean that the workbook is automatically closed after you print from that workbook, right?
As I know, if we use the default ribbon in Excel, no matter in Windows XP or Windows 7, the opened workbook should be stay opened after you print from that Excel workbook.
So the question is that: what is the version of office? What is the Classic Menu add-in you're running now? Did you manually download and install it to your system? Could you please share a picture with us about the add-ins you're using?
Yolanda Zhu
TechNet Community Support

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

FM HRTRV_IF_GET_TRIP does not return USERDATA

Hi, it's me, yet again...
I'm using the FM "HRTRV_IF_GET_TRIP" in FITE_VC_GENERA_DATA in a post exit of comp-controller method "ON_SHOW" to get the structure/Table USER/PTK99 from the TE Cluster for binding to the context afterwards. At least that's the plan. The FM does not return me the data I expect in parameter USERDATA, although there is data in the TE Cluster and within the FM, I can see the global Table USER being filled whilst the macro RP-IMP-C1-TE. But this data is not further process neither is seems the strucutre USERDATA to be touched at any point of the FM. Am I calling the FM 'wrong' in any way? I'm close to making an implicit enhancement at the end and forcefully fill userdata from user....
Too long, didn't read: USERDATA is not returned filled --> WHY?
CALL FUNCTION 'HRTRV_IF_GET_TRIP'
EXPORTING
    employeenumber             = wd_assist->GS_COMMON_RFC_INPUT-employee_number
    tripnumber                 = lv_tripno
*   LANGUAGE                   = SY-LANGU
*   CALCULATE_AMOUNTS          = 'X'
*   GET_TRIP_FROM_MEMORY       = ' '
IMPORTING
*   FRAMEDATA                  =
*   STATUS                     =
    USERDATA                   = ls_user " should contain cluster values, but it doesn't
tables
*   RECEIPTS                   =
*   ADDINFO                    =
*   GUESTS                     =
*   TEXT                       =
*   MILEAGE                    =
*   STOPOVER                   =
*   DEDUCTIONS                 =
*   COSTDIST_TRIP              =
*   COSTDIST_STOP              =
*   COSTDIST_RECE              =
*   COSTDIST_MILE              =
*   AMOUNTS                    =
*   ADVANCES                   =
    return                     = lt_bapiret " says method was executed successful
In the insides of the FM:
* IF CALCULATE_AMOUNTS <> 'X'. "XJY
* import the trip because it was NOT imported before
READ TABLE T_PERIO INDEX 1.
TE-KEY-PERNR = T_PERIO-PERNR.
TE-KEY-REINR = T_PERIO-REINR.
TE-KEY-PERIO = T_PERIO-PERIO.
TE-KEY-PDVRS = T_PERIO-PDVRS. " Once this line is executed, the global table USER is fileld with the data I expect
RP-IMP-C1-TE.
* ENDIF. "XJY
if t_perio-abrec = '0' or
     t_perio-abrec = '1'.
    clear te-key-pdvrs.
    import beler from memory id te-key.
endif.
I hope somebody has ever used this one and can tell me what I'm doing wrong...
Cheers, Lukas

good to know. that you have already implemented similar thing. In our case if employee want to pick a manager he will only be given option from a custom table entries.
They way i was thinking was that there will be a checkbox that will say "Override Approver"
and when that will be checked text filed will be enabled with search help restricted to custom table entries.
I have one question. When I am enhancing FITE_VC_REVIEW and adding field in that view, I m finding it hard to track it. Looks like adding to General data screen will be much easier.
R u using ABAP memory to track field and use it at SMOD or you are using SAP memory ?
I am just starting on this one and not expert at webdynpros.. will ping you if i need any more help
and yes i just added following like in FM HRTRV_IF_GET_TRIP
read TABLE user INTO userdata INDEX 1
to get it to load userdata..

Search does not return my documents

Hi Gurus,
I have created few documents using CM SDK. I could able to see these documents using IFS browser.
Now I wrote content search method to search document content.When I search for "cmsdk" string it returns 13 documents.But when I search for a string in the document, I created , for example a text like "struts" it does not return any result , though this document I can see in IFS browser.What could be the reason?.
BTW I didn't create any FORMAT type while I am storing the document. Can any one point me to a document where I can find some instructions on "must and should things to do before search".
I am using CM SDK 9.0.3.
Thanks in advance.
Giri.

have you set the indexing on?

ServletRequest.getScheme does not return https

Similar Messages

Maybe you are looking for