Set data in filter, get it in transmitter/player

I want to be able to set keyframeable attributes on a clip. These attributes then affect the output of a transmitter or a player.
My idea of how to do this is to create a filter that has the attributes I need, but doesn't actually alter the pixels. Instead it just stores the attributes somehow (in the PPix?). Then the transmitter/player will read the values of these attributes and modify its output. The question is whether it's possible to store data about the frame inside a filter, and read it from a transmitter/player.
I guess I could create my own pixel format that contains the data, but that seems a bit overkill, and inconvenient.

Hi Vilcans,
You could achieve this by looking for the existence of the effect in the segment at the current timeline position, and then getting the effect parameter data. In your transmitter, you'd use the Video Segment Suite, much like the RTPlayback sample uses the suite to parse the timeline, and you would search for an effect node with attributes matching the effect you're building.

Similar Messages

Getting Error in Infoview while using Date Range Filter in SAP BW Universe

Hi,
I have created a date range Filter in My Universe
<FILTER KEY= "@Select(Debit Memo Date\L01 Debit Memo Date)">
<CONDITION OPERATORCONDITION= "Between">
<CONSTANT CAPTION= "[ZFDAY_MTH].[LEVEL01]"/>
<CONSTANT CAPTION= "[ZCBDATE].[LEVEL01]"/> </CONDITION></FILTER>
It was Parsed "OK" without any errors.
When I used this filter in my report it does not return any records, while there are some records which I had verified earlier. When I include the two fields "[ZFDAY_MTH].[LEVEL01] and "[ZCBDATE].[LEVEL01] in My Report with the filter I am getting the following error -
A database error occured. The database error text is: A pointer intended for use is NULL. pConstantOperand is NULL in SAPSQLExpressionEvaluator::getOperandsFromCondition, exception raised at line 125 of file source/sofasqlexpressionevaluatorbase.cpp. (WIS 10901)
If I remove the filter and run the report , it gives me the expected results.
Please help me if anyone has faced this issue earlier.
Thanks ,
Pankaj Goswami

Hi,
How about using this code.
I have not tested but I think if we follow this syntax pattern, it might work
<FILTER KEY="[Debit Memo Date\L01 Debit Memo Date].[LEVEL01].[TECH_NAME]"><CONDITION OPERATORCONDITION="Between"><CONSTANT TECH_NAME="@select(ZFDAY_MTH.LEVEL01','D',,mono,free)"/><CONSTANT TECH_NAME="@select(ZCBDATE.LEVEL01','D',,mono,free)"/></CONDITION></FILTER>
Regards,

What happened to the Get/Set Date and Time utilities from RT 7.1?

I'd like to use the Get/Set Date and Time utilities that were available in 7.1, but disappeared after that. I see that the 7.1 utilites call a dll that does not appear to be installed with LabVIEW RT 8 and later. What do I need to do to use the utilites from 7.1 that do not appear in later versions?

In Labview 8.2 and later there are two directories for vi.lib. settime.dll is located in National instruments\Labview 8.2\Targets\NI\RT\ vi.lib
This is the dll you want to use in order to call it use the same Vi as in 7.1 (RT set date and time.vi) and link it to the correct dll.

How can I get a PHP include to update automatically after a set date?

Hi guys,
I maintain a number of website for sports athletes and on their websites I have an include for their next event - just a small PHP file with when and where the next event is.
After each event I have to manually update the include to the clients' next event which is a bit of a pain and quite time-consuming.
Is there any way I can set up the include script to automatically update with a different file to include after a set date?
Or, even better, can I set up the include itself to display the updated content after a specific date?
This is what the include contains...
<img class="event" src="/images/eventPicture.png" />
<p class="nextEvent">Location<br />
Series<br />
1-3 January 2013</p>
Thank you very much and I hope to hear from you!
SM

Its easier than setting up a database...I've been dabbling. You will still need to use server-side language like php.
First establish the date by adding the get date function to the page:
<?php
$date = date('d-F-Y');
?>
Then add the below bit of php in the position where you want the 'include' to appear. (so if on the 19th of April you want event_3.php to appear:
<?php
if ($date == "19-April-2013") { ?>
<?php include ('event_3.php')?>
<?php } ?>
This isnt economical for many event dates but if you have a few it will do as a solution.
It's not great because you would need to add as below, changing the include on the date you want it to show which will replace the previous event.
<?php
if ($date == "19-April-2013") { ?>
<?php include ('event_3.php')?>
<?php } ?>
<?php
if ($date == "30-May-2013") { ?>
<?php include ('event_4.php')?>
<?php } ?>
<?php
if ($date == "4-June-2013") { ?>
<?php include ('event_5.php')?>
<?php } ?>

How to pass a data set as a filter?

Hello everybody!
Are asking me to do the following:
Select from a Combo Box classifications suppliers and all suppliers to pass on the whole as a result of a query filter.
At this time I was only able to pass the values of the first, someone will have some idea on how to pass a data set as a filter?
The result of my selection, as a way to "Store" and assign it as my input filter query.
thanks for your help.

Hi Jan,
thanks for your help, but...
My problem is passing the result of a query directly to another query, to me that this generates a result.
For Example: zquery_1, is the entry qualification of suppliers and I returned a set of suppliers.
The zquery 2, receives as input suppliers that set me back and the materials associated with the suppliers.
To achieve this, I am passing the result of a zquery_1 store and east asginandolo as variable input to zquery_2, my problem is that this just me reading the first of the records.
If the 3 providers zquery_1 me back, how can I pass these 3 andalusia zquery_2 providers without the user having to select them?
greetings
Manuel Sandoval

I haven't set up my game center with my apple id so when i am trying to set it up and get to birth date part it starts all over how do i fix this?

I haven't set up my game center with my apple id so when i am trying to set it up and get to birth date part it starts all over how do i fix this?

If the problem persists, you'll probably have to make another apple id, it wont take off any games or music or apps or anything you've bought it will all stay there, i have two apple id's and i don't have a problem with anything.

I get the message on Apple TV "setting date and time"

I get the message on Apple TV "setting date and time", but seems to be stuck in that action. When I check, network settings, everything seems OK. Any suggestions?

This will normally happen if you continually turn the AppleTV off at the wall (happens each time you turn it on). If its stuck on that, just turn it completely off, then see if it gets stuck on that again. If it keeps getting stuck (as in for more than 5 minutes) on it, plug it into your computer and attempt to update the AppleTV. You may need to restore it if the software is already up to date or it's still not working after the update.

Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem

Can't get my appletv to go pass setting date an time , and won't restore

My Apple TV won't restore or get passed the setting date an time
What c an I do or try ???

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

TS3920 iPad 1 w/ iOS 5 on Barcelona time zone location when Automatically Set Date/Time is turned on. How do I get all of my devices back to PST time?

After returning from an extended trip in Spain, my iPad 1 with iOS 5 retains the Barcelona location when "Automatically Set Date/Time". Most of my Apple devices are affected, how do I get all of my devices back to PST time? Thanks!

Turn off Automatically Set Date/Time and set your time zone.

I am getting a message "setting date and time...." but nothing happens

My Apple TV has stopped working. I start up and it says "setting date and time...." but I cannot access the internet.

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Cannot get pass the "Setting date and time" screen

Hi, I am faced with a very serious problem... someone please help!
I bought home an Apple TV (2nd generation) for my parent overseas, but when I switched on - it got stuck on "Setting date and time" screen and cannot continue. Pressing "menu" button (or hold on for many seconds) does not work at all! I am stuck in that screen. Restart the Apple TV does not helped.
I thought it is the issue of the remote control (maybe "menu" key has failed), so I bought another one (the aluminum model) and the same issue persists! I tested the remote control on Mac (boot up and press menu key, using Better Touch Tool... both shows the menu key is working).
What shall I do? Thanks!

is it connected to the internet either wired or wirelessly

RFC ; setting in SM59 to get data from NON SAP

Dear ,
i have developed REMOTE ENABLED RFC which take input one serial no. from NON SAP (i,e IPMS system ) and store in SAP database. so now i have to know how give setting in SM59 to get access my RFC by non sap.
Edited by: manoj kv on Jul 30, 2008 12:38 PM

Hi,
Place the cursor on -> HTTP Connections to R/3 System
Create Give description, connection type H,
In technical settings give target host and path...

Data domain filter in endeca studio

earlier in Endeca 2.3, we could use data source filter and restrict the data ...link shows more details Adding filters to a data source
But I am not able to get this to work in Endeca 3.1 studio under Endeca server definition ..it is able to validate the definition ....here is my definition
"dataDomainName": "Test_DS",
"name": "Test_DS",
"port": "7002",
"server": "Test_Server",
"sslConfig": {
    "caFile": "endecaServerTrustStore.ks",
    "caPassword": "*****",
    "certFile": "endecaServerClientCert.ks",
    "certPassword": "****"
"baseFunctions": [
   "class":"com.endeca.portal.data.functions.DataSourceFilter",
   "filterString":"Region='NAPA'"
   "class":"com.endeca.portal.data.functions.RefinementFilter",
   "attributeValue":"2014",
   "attributeKey":"YEAR"

Base Functions were removed in EID 3.1 and replaced with a Base Filter for each Data Set. See http://docs.oracle.com/cd/E40518_01/studio.310/studio_migration/toc.htm#Removed%20State%20Manager,%20baseFunctions,%20parent/child%20relationships for details.

Can I programmaly write data to Data Source Filter in view External List?

Hi, everybody. I need a help with external list. View in external list has parameter named "Data Source Filter" for write filter data for BCS query to DB. I wanna programmaly write data to this parameter but I haven't any ideas about class, property
or method what can write data to it. Any idea?
Aleksandr Shramko

Hi Alexksandr Shramko,
To set the filter value for a SharePoint common list, SPView.SetViewXml property is used to set the filter value. Following thread contains sample to help get a better understanding about how to use it:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0ddca0f6-2b17-4f4a-9d66-f3d684ed4a11/how-to-set-orderedview-of-the-list-view-programmatically?forum=sharepointdevelopmentprevious
However, I haven’t make it work for external list. In this situation, I would suggest you to custom control to display the list item instead of customizing the existing list view filter. You can choose to use gridview or other table to show the data.
A sample here:
http://stackoverflow.com/questions/7647941/retriving-splistitem-through-external-lists-whose-source-is-from-sql-server-08
Thanks,
Qiao Wei
TechNet Community Support

Set data in filter, get it in transmitter/player

Similar Messages

Maybe you are looking for