Setting a default value for DropDownByIndex UI
I have a drop down by index UI element which gets its values from a table. i need to set the default value to 'Select a State' or something like that. How do i do it?
Thanks,
Lathika
Hi Lathika,
Please follow these links:
To set default value as blank in drop down by index
and
Re: Value of RFC in Dropdownbykey
Also, try this solution:
that means you have to set at design time,
to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
like
wdContext.currentContext<nodeName>Element.set<FieldName>(<default value>)
This generally done in Initialization method of the controller
Thanks,
Raj.
Message was edited by: Raj
Similar Messages
-
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF -
How to set a default value for particular field in SRM PO Portal
Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
SathishDear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish -
How to set the Default values for Info Objects in Data Selection of InfoPac
Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CVHi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha -
Set a default value for a radio button populated with a List of value
Hi,
I am using jdeveloper 11.1.1.3.0. I need to set a default value for a radio button populated with a List of value(Yes/No). Here's the selectonechoice code.
<af:selectOneRadio value="#{bindings.Code.inputValue}"
label="#{bindings.Code.label}"
required="#{bindings.Code.hints.mandatory}"
shortDesc="#{bindings.Code.hints.tooltip}"
id="sor1" autoSubmit="true"
valuePassThru="true" layout="horizontal">
<f:selectItems value="#{bindings.Code.items}" id="si1"/>
</af:selectOneRadio>
I want to have the selectonechoice set to No by default. In the previous versions, I set the default value in the base attribute VO. But it is not working in the new version.
ThanksHi,
this should work in JDeveloper 11.1.1.3 the same as in 11.1.1.2. If it doesn't then it is better to file a bug than to work around it
Frank -
Can we set a default value for the container variable in BPM?
Can we set a default value for the container variable.?
Suppose if i have a loop step and i have given a container variable i=5 as end condition.What value will it take during its first execution?Can we set the value for container before a recieve step?Hi
Define Container Variable of Type integer and Category Simple Type .Use Condtion in Loop.
In Container Operation Step Assign value and Use Expression to
Increase or Decrease Valus according to your operation.
look Pattern 4 in this blog to understand Container Operation
/people/sharathchandra.girmaji/blog/2008/09/11/bpm-with-patterns-explained-part-1 -
How to set the default values for print options
Hi all,
We can set the default value for print options, just like Logical destination、numbers of messages、print immediately and so on, so where we should to maintain these default?Hi Sandy,
This can be done by an abaper by making changes in the driver program. The Driver program feeds all the data which u have mentioned for printing.
if the driver program is standard. copy to an z type and make modification on printer settings on the driver program code.
this will surely solve the issue.
Regards
Gunaseelan -
Setting up default value for POV in Financial Reporting Studio
hello
We need to Set up default value for POV in Financial Reporting Studio. For example, we need period to pick up Sep as default value when we run the report.
Is there any way we could do this???
Regards
NehaHi Neha,
Yes, there is a way to setup of your grid POV. Take a look at this: http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/127.html
Cheers,
Mehmet
p.s. Please mark the answers helpful or correct, if they've helped you or answered your question. Thanks! -
Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu NHey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS) -
Set of default values for Select-Options
Hi Gurus,
I have a requirement where I need to set default values for select options
ex: SELECT-OPTIONS: S_MTART FOR MARA-MTART
default values must be ERSA - HIBE- FHMI - DIEN - GEST
Please tell me how to do it.
Effective replies will be rewarded with full points
KarthikHi,
For each SELECT-OPTION, you can only specify one DEFAULT.
You must specify the default value g in its internal format, e.g. "SELECT-OPTIONS DATE FOR SY-DATUM DEFAULT '19931224'", not "... DEFAULT '24.12.1993'".
The default value g should normally be a literal because, at runtime when you use SUBMIT, it is transferred to the selection options table sel so early that no value can be assigned to the field g. System fields like SY-DATUM are an exception here because the system usually assigns values to them as soon as the report processing starts.
When you use user-defined selection screens in your programs that you do not call using SUBMIT, the DEFAULT value is transfered when the selection screen is first called. In this case, therefore, you can use other fields g.
regards,
sowjanya
Message was edited by: sowjanya suggula -
Setting a default value for SQL based LOV
Hi There,
Is there a way to set the default value in an LOV. Like lets say the LOV gets distinct to_Char(date_field,'YYYY') from a table. I want that the highest year is the default value. Currently, since I have the null option also, when the page loads, the lov is always null. I need to change it manually.
Thanks,
SunYou can easily set the dynamic item defaults
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/bldapp_item.htm#HTMDB28287
for example select the default type as PL/SQL Function Body and enter the following code
declare
v_return date;
begin
select max(date_field) into v_return from your_table;
return to_Char(v_return,'YYYY');
exception when others then
return null;
end; -
How to set a default value for a page item
I am working with a facility table that has name and address information. The user can add contact name information on a separate page. Since the address for the facility and contact is usually the same, I want to add a default value for the contact address. The facility page is on 201 and the link to add a new contact row is on page 202. I showed in the default value :P201_street for the contact's address. But, when I run the page, the contact address field shows the :P201_street, not the actual facility address. What am I leaving out? Must be something obvious?!
Thanks very much.
JudyIn the default value, I showed: v('P201_STREET1') with the default value type of: PL/SQL Expression and received the following oracle error ==> Item default is not a PL/SQL expression. Use &ITEM syntax. The v('ITEM') syntax is not valid for item defaults. So I changed it to: &P201_STREET1 and got another oracle error , ERR-9132 error in PLSQL expression for item default code, item=P202_STREET1.
Any more suggestions? Thx.
Judy -
Tax codes - can you set up default value for rows and freight? HELP!
Hello - I have two issues with tax codes:
1. When adding a sales order if any of the rows do not have a value for "Tax Code" I will get an error "Row without tax was found".
- How can I get all rows on my sales orders, documents, etc to default to a specific tax code? Or will users ALWAYS have to enter the tax code?
2. When addring a sales order with Freight, if the order is added without adding a tax code to the freight I will get an error "Expense with tax was found"
- How can I get the tax code have a default value? We always use the same tax code, so it is redundant to have to enter this information.
Any suggestions?Hi Jhon,
this is the simplest and best way to make a Tax Code default is Go to
Answer for Question 1
Administration -> Setup -> Financial -> Tax -> Tax Code Determination (Click on this)
in that screen you can set a default tax code for both sales as well as Purchase.
If you want to set Tax Code based on Vendors or Customers or Items separately then you can use the Key Fields.
Answer for Question 2
Once you enter the Tax Code in the freight i think it takes the Tax Code itself, I'm not so sure about this one though.
Hope this helps you out
regards,
Shreyas -
Setting the Default Value for a dynamic select menu
Hi I have a php page with 2 forms on it, one feeds the other to achieve a drill down (manufacturer > model). In the second select menu I have a default static value "Select Aircraft Model", I want to set a value for the first dynamic select menu to read "Select Aircraft Manufacturer". When I add a static value to my list it tells me I alreay have a dynamic behavior on this menu and to choose a different one. I have included the code for both menus. Thank you in advance, I know this must be a stupid question, but it's got me stumped.
Tom
//This is the menu I want to add the default static value to//
<td width="667"><select name="airMake" style="width: 200px;"onchange="this.form.submit();" id="airMake">
<?php
do {
?>
<option value="<?php echo $row_rsAirManufacturer['aircraft_manufacturer']?>"<?php if (!(strcmp($row_rsAirManufacturer['aircraft_manufacturer'], ((isset($_POST["airMake"]))?$_POST["airMake"]:"")))) {echo "selected=\"selected\"";} ?>><?php echo $row_rsAirManufacturer['aircraft_manufacturer']?></option>
<?php
} while ($row_rsAirManufacturer = mysql_fetch_assoc($rsAirManufacturer));
$rows = mysql_num_rows($rsAirManufacturer);
if($rows > 0) {
mysql_data_seek($rsAirManufacturer, 0);
$row_rsAirManufacturer = mysql_fetch_assoc($rsAirManufacturer);
?>
</select>
</td>
</tr>
</table></form>
<form action="quoteResult.php" method="post" name="quoteForm">
<table width="100%" border="0" cellpadding="5px">
<tr>
<td width="260"style="color: #000; text-align: right;">Aircraft Model:</td>
<td colspan="2"><span id="spryselect2">
//This is the menu that works correctly//
<select name="airModel" style="width: 200px;" id="airModel">
<option value="" <?php if (!(strcmp("", ((isset($_POST["airMakeField"]))?$_POST["airMakeField"]:"")))) {echo "selected=\"selected\"";} ?>></option>
<?php
do {
?>
<option value="<?php echo $row_rsAirModel['aircraft_model']?>"<?php if (!(strcmp($row_rsAirModel['aircraft_model'], ((isset($_POST["airMakeField"]))?$_POST["airMakeField"]:"")))) {echo "selected=\"selected\"";} ?>><?php echo $row_rsAirModel['aircraft_model']?>Select Aircraft Model</option>
<?php
} while ($row_rsAirModel = mysql_fetch_assoc($rsAirModel));
$rows = mysql_num_rows($rsAirModel);
if($rows > 0) {
mysql_data_seek($rsAirModel, 0);
$row_rsAirModel = mysql_fetch_assoc($rsAirModel);
?>
</select>Change this -
<select name="airMake" style="width: 200px;"onchange="this.form.submit();" id="airMake">
to this -
<select name="airMake" style="width: 200px;"onchange="this.form.submit();" id="airMake">
<option value="-1">Select Aircraft Manufacturer</option>
Then if the value of 'airMake' is -1 you know that no choice was made. -
SQLLDR - how to set a default value for an empty string
I'm using SQLLDR to load data from a flat file on Oracle 10g 10.2.0.4 EE, Linux RHEL 4 update 6. Seems like my question is simple, but darned if I can't find the solution.
My source file (comma delimited extracted form a different RDBMS) has some (not all) rows where the output for a string is "", and not NULL. How do I check for empty string and add a default value in the control file? The target column is non-nullable
Here's my current control file - however, the column attributeName where sometimes the source record is "" does not get evaluated as NULL.
load data
infile 'mydata.del'
badfile 'mydata.bad'
discardfile 'mydata.dsc'
into table mydata
fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS
(l_metadata,
company,
className,
attributeName "decode(:vc_attributeName,null, 'none')",
attributeDefault)
{code}
When I tried decode with "", I received the following error:
{code}SQL*Loader-350: Syntax error at line 11.
Expecting "," or ")", found ", 'none')".
attributeName "decode(:vc_attributeName,"", 'none')", {code}
This does not work either:
{code}
load data
infile 'mydata.del'
badfile 'mydata.bad'
discardfile 'mydata.dsc'
into table mydata
fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS
(l_metadata,
company,
className,
attributeName NULLIF attributeName = BLANKS ,"decode(:vc_attributeName,null, 'none')",
attributeDefault) I get the following in the log:
Table COMPANYMETADATA, loaded from every logical record.
Insert option in effect for this table: INSERT
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
L_METADATA FIRST * , O(") CHARACTER
COMPANY NEXT * , O(") CHARACTER
CLASSNAME NEXT * , O(") CHARACTER
ATTRIBUTENAME NEXT * , O(") CHARACTER
NULL if ATTRIBUTENAME = BLANKS
SQL string for column : "decode(:attributeName,null, 'none')"
ATTRIBUTEDEFAULT NEXT * , O(") CHARACTER
Record 1: Rejected - Error on table COMPANYMETADATA, column ATTRIBUTENAME.
ORA-01400: cannot insert NULL into ("SRV5"."COMPANYMETADATA"."ATTRIBUTENAME")
{code}
Any help is appreciated -
Edited by: kpw on Feb 9, 2009 11:10 AMHello,
I just loaded following data successfully in my_data table using the same control file I posted. Yes it will evaluate "" as null and replace with none, remember in control file you have this option, "optionally enclosed by '"'.
#my_data.dat
"myname1", "attribname1"
"myname2", "attribname2"
"myname3", "attribname3"
"myname4", ""
#my_data.ctl
load data
into table my_data
fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS
my_name char(30),
vc_attributeName "decode(:vc_attributeName,null, 'none', :vc_attributeName)"
{code}
Here is the output log file
{code}
Control File: my_data.ctl
Data File: mydata.dat
Bad File: mydata.bad
Discard File: none specified
(Allow all discards)
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table MY_DATA, loaded from every logical record.
Insert option in effect for this table: INSERT
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
MY_NAME FIRST 30 , O(") CHARACTER
VC_ATTRIBUTENAME NEXT * , O(") CHARACTER
SQL string for column : "decode(:vc_attributeName,null, 'none', :vc_attributeName)"
Table MY_DATA:
4 Rows successfully loaded.
0 Rows not loaded due to data errors.
0 Rows not loaded because all WHEN clauses were failed.
0 Rows not loaded because all fields were null.
Space allocated for bind array: 18560 bytes(64 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 4
Total logical records rejected: 0
Total logical records discarded: 0
Run began on Mon Feb 09 18:17:35 2009
Run ended on Mon Feb 09 18:17:36 2009
Elapsed time was: 00:00:00.98
CPU time was: 00:00:00.10
{code}
Hope this helps clearing your dobuts
Regards
Maybe you are looking for
-
Constant Kernel Panics on Mavericks 10.9.5
Hey Everyone, I really hope someone out there can help me out because these recent kernel panics I've been getting are driving me crazy because they always happen right in the middle of some important project I'm working on. Before I share the latest
-
I think there are a few features which do not require big changes in the firmware which would enhance the product's functionality: 1. Add arrow keys to the on-screen keyboard. Correcting a typing error is difficult because putting the insertion point
-
Adding current date to text field w/ Javascript in Acrobat 8
I am trying to add the current date to a text field using javascript in Acrobat 8 Professional. I am using the util.printd function in a javascript function but the date of creation shows in the text field, NOT today's date. Any clues?? var f = this.
-
Dynamic column name for Oracle Server Procedure
hello, May be it's not a right place for my question, but I hope that some of you can help me. I have source table A that has data of the same kind in 62 fields, let's say employee count for 62 departments. I do some processing with these counts(sum(
-
Consolidated Report on emails to all agents in AGENT INBOX
Hi I need to prepare a report for the manager to check the details( Dates,Status and Escalations) of all the emails received by all agents in the system. How can I acheive it ? I was trying to create the report using the BTQUeryAUI Bol query i