Setting Cost Center Satus

Hi
I have a problem changing cost center status.I have locked postings in the control tab of the cost centerand set the analysis period and validity period then selected Inactive:change.Status goes to Inactive.When I save, the status reverts back to Active.How can I resolve this?
Kind regards
Manette

Hi,
What is exactly that you want to do? The status for cost centre should be always active (not as in profit centre). Actually, this active/inactive status in cost centre is purely technical.
Regards,
Eli

Similar Messages

Cost Center Text in MB21/MB22/MB23 for movement Type '201' ?

Hello Experts,
I have on issue in T-code MB21/MB22/MB23 . There is Cost center in these t-code, in standard setting cost center text appears
but here only cost center text doesn't appears against that cost center . Please review that attached image that have text but in my case
it doesn't appears .so please provide me some solution if have any Idea .
Thanks & Regards
Gaurav Sharma

Dear Gaurav,
please debug in
program LKACBF02
Form FILL_TEXT
It should fill the text in there.

Good Issue - Cost Center & Activity Code

Hi All,
I've a problem when I creating Good Issue using SDK SAP2007, I set "Cost Center" (CostingCode) dan "Activity Code" (CostingCode2).
When I run the code, and check the result in SBO2007 Good Issue, the "Cost Center" (CostingCode) dan "Activity Code" (CostingCode2) was in the "DistrRule" column not in the "Cost Center code" and "activity code" column, is this normal ? how to insert both data into the right column ?
This is my code:
   Public Function uf_SAP_GoodIssue(ByVal dtTable As DataTable, ByVal p_cardCode As String, ByVal p_Date As Date, ByVal p_priceList As Integer) As String
        Dim lngErr As Long
        Dim strMsg As String = ""
        Dim sboStockOut As SAPbobsCOM.Documents
        sboStockOut = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInventoryGenExit)
        sboStockOut.DocDueDate = CDate(p_Date)
        sboStockOut.DocDate = CDate(p_Date)
        sboStockOut.PaymentGroupCode = Trim(p_priceList)
        sboStockOut.CardCode = Trim(p_cardCode)
        Dim i As Integer
        For i = 0 To dtTable.Rows.Count - 1
            If i <> 0 Then
                sboStockOut.Lines.Add()
            End If
            sboStockOut.Lines.AccountCode = Trim(dtTable.Rows(i)("AccountCode"))
            sboStockOut.Lines.CostingCode = Trim(dtTable.Rows(i)("CostCenter"))
            sboStockOut.Lines.CostingCode2 = Trim(dtTable.Rows(i)("ActivityCode"))
            'sboStockOut.Lines.CostingCode3 = Trim(dtTable.Rows(i)("PersonnelNo"))
            'sboStockOut.Lines. = Trim(dtTable.Rows(i)("ActivityCode"))
            sboStockOut.Lines.ItemCode = Trim(dtTable.Rows(i)("ItemCode"))
            sboStockOut.Lines.Quantity = CDbl(dtTable.Rows(i)("qty"))
            'sboStockOut.Lines.Price = 500
            sboStockOut.Lines.WarehouseCode = Trim(dtTable.Rows(i)("WarehouseCode"))
        Next
        lngErr = sboStockOut.Add
        If lngErr <> 0 Then
            Call oCompany.GetLastError(lngErr, strMsg)
            Return "Found error:" + Str(lngErr) + "," + strMsg
            'Return "Failed to issue Stock." & lngErr
        Else
            Return "" '"Stock Issued"
        End If
        Call oCompany.GetLastError(lngErr, strMsg)
        If lngErr <> 0 Then
            Return "Found error:" + Str(lngErr) + "," + strMsg
        End If
        Return ""
    End Function
Thx Before
Herfin Jodana

Hi Suraj,
Please check table COBK / COSP (with business transactions RKP1 and RKP2). Hope this may help you.
Best regards,
Dhananjai

Set Clearing Account to Cost Center or Cost of Sales

Dear Expert:
I have issues for two different spareparts material number (e.g. material number "A" & "B") that posted to Interim GL Account "C" which clear to two different receiver:
a) Clear to Cost Centre
b) Clear to Profit Segmet/material Number
E.g.
1. Material number "A" - when there is stock access from the cycle count, the amount will be posted to Interim GL "C". Once this GL 'C" is cleared the amount will be posted to one Cost Centre "D".
2. Material Number "B" - when there is stock access from the cycle count, the amount will be posted to Interim GL "C". Once this Interim GL "C" is cleared the amount will be posted to material "B" under profit segment and appear in the Profitability Analysis Report.
Appreciate your advice how to check the setting why these 2 materials ("A" & "B") go to different clearing receiver.
Thanks
Zahari

Receiver type depends on purpose of the object, for eg, you have an internal order to capture some costs, which you want to anlayse at cost center level upon order closing, then you would settle to cost center. similarly you have maintanance order which you can settle to GL code if you dont have intention to capilise the costs (fixed asset).

Cost center & Profit Center set up

Hi,
I am a Chartered Accountant by Profession. I just started my classes to eventually go for certification as FICO Consultant. I have the following question for you. I would appreciate if someone could answer this for me.
THIS IS WHAT I WANT TO ACHIEVE AS AN END RESULT FROM CONTROLLING SET UP.
Basic Premises:
One Company is doing business in computers and has business area's already defined geographically.
Products/ Profit Centers: Desktops & Laptops, Computer hardware like mother boards, RAM, Hard drives etc, Software.
Cost Centers: Production, Ware housing, Selling & Distribution, Gen Admin.
We can set up cost elements to match up with the expenses accts in GL. Say Cost of Production, Salaries, Stationery, Postage, Travel Etc. While setting up the cost elements we will not select a default cost center.
We can set up cost centers for Production, Warehousing, Selling & Distr. and Gen Admin.
We then set up Profit centers for Desktops & Laptops, Computer Hardware, Software.
Now let us go with an example for a flow of an expenditure:
We have incurred a Production cost for desktops 1,000 and Production cost for Computer Hardware 750.00
If we leave the linking of cost centers with the profit centers, at the entry level we can select a cost center Production for both the expense of 1,000 and 750 and then select the profit center Desktop & laptops for 1,000 and Profit Center Computer Hardware for 750. This will solve and settle the issue.
But I have been advised that the cost centers need to be linked to profit centers. The flow will be
1. Cost Element to Cost Center has to be done by the user ( Since we did not define a default cost center at the Cost Element level).
2. From the cost center the expenditure should flow automatically (Since we can link the Cost Center to A Profit Center). This is where I am having a problem in understanding the concept.
For a single cost center we cannot define multiple Profit Centers. In the above example say we link the Cost Center "Production" to Profit Center "Desktop & laptops". What will happen to 750 which actually relates to Profit Center "Computer Hardware". We can have as many Cost Centers as Profit centers to solve the problem, but that defeats the management purpose of wanting to know what is the production cost for all lines. Can we create Production in the second level under Standard Hierarchy and create cost centers for Production (Desktops & Laptops), Production(Computer Hardware) and Production Software, Drag and group them under the Second level Production that we created under standard Hierarchy. I do not know how this will affect the reports that are generated for cost centers. The reports for Profit centers will be fine.
Hemreddy

Hi,
Cost center is defined as per requirement, In your scenerio cost center will be department wise like different product dept for example Desktop, hardware accessories, laptops etc.. So, every cost cenet should be assigned to profit center. As per reporting related to cost center and profit center both report has it own advantages like cost center is purely related to cost of the particular department wheras profit center is related to both cost and revenue, it is broad prospective related to profit or loss made for that particular profit center.
Regards,
Sreekanth

How to set activity type for a cost center

i was practicing the split valuation topic and for the that i was making a routing for a product so that i can have that product for inhouse production.
while using ca01(to create routing), i am facing a problem with the activity type.
when i am setting up the operation i am getting an error " activity type # is not set up for cost center 10004220 in year 2007"
can you please tell me how should i come out of it.
thankyou very much

hi Nandha, i am sorry but i could not do it. i am new in this. let me make my problem more clear to you.
i was creating a routing using ca01
after puttig all the details i switched to operations tab and in operation tab i put workcenter as (1111 - lathe, may be i am wrong as i told you i am just practicing).
i did not put anything on that screen and then when i pressed enter it took me to another screen with name Operation check.
here is the layout of the problem on that screen
                      std val      unit     activity type     efficiency
set up                            min        1422
machine                         min        1421
labor                              min        1420
and then curser being on the std value i am getting this error "activity type 1422 is not set up for cost center 1000 4220 in the year 2007.when i am ignoring it it is switching to next std val coloumn and the same error.
thankyou for your time

Error Activity type 502000 not set up for cost center 1000 cc111

hi all
While creating a work center (CR01) I need to enter a cost center and activity type for machine hours. However, while entering the activity type the following message appears:
Message no. CR 061
You are attempting to assign activity type XXXX to the work center. However, this activity type has not yet been set up in controlling area 1000 for cost center xxxxx.
while creating the activity type in KL01 i have already given * in cc category so it should go for all cc
What could cause this problem?
Thank you in advance,
Kind regards

Hi,
Check whether the activity type is maintained at the correct controlling area via KL03. If not, then create the activity type (KL01) in the corresponding controlling area.
Regards,
Darrel

Activity Type ENGINE not set up for cost center

Hi all,
Currently, we have set up a work center in our system, which has the following intergration:
- Controlling Area --> TECH
- Cost Center --> TECH001
- Activity Type --> ENGINE
- Plant --> PN01
- Work Center --> PL01
Based on the above, the work center PL01 has the relationship of where Activity Type ENGINE and Cost Center TECH001 are linked together, where Cost Center is tied to Controlling Area TECH.
However, when a user tried to create General Task List (Trxn IA05), under Work Center PL01 and Plant PN01, and inserted Activity Type ENGINE in Operation item. It gives the following error:
Activity Type ENGINE not set up for cost center
I have also checked KP26 that everything is setup correctly.
Please can someone shed some light on the above?
Many thanks and regards,
Patrick
PS: Full point guaranteed for helpful answer.

Hi all,
I have solved the issue by changing the Start Date of the Work Center. Now everything works well.
cheers,
Patrick

Activity Type set up for cost center

Hi All ,
While creating a task list i m getting a message
Activity type is not set up for cost center in the year 2008
Message no. CR062
How could i set the activity type for cost center? Plz tell the procedure.
regards
sunil
Edited by: sunil gupta on Sep 19, 2008 10:12 AM

Dear Sunil,
Check out this,
1.Create a Cost center using T code - KS01.
2.Create an activity type using T code - KL01.
3.Assign the Rates for an activity type & cost center combination using T code KP26.
4.In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal
Year as 2008,enter the cost center, activity type click on overview screen (F5)---> enter the per hour Rate
under Fixed price and set value as 2 for distribution key and plan price indicator as 3.
5.After performing this ,while creating the work center ,this combination of activity type & cost center
should be assigned.Then while creating routing/task list this work center can assigned for performing
operations.
Check with this & revert back if you need any further help.
Regards
Mangalraj.S

How to set master cost center to required input in the maintaining position

Dear experts,
I have two questions in the HCM module,could you please tell me?
Issue 1: How to set the column of master cost center to required input in the maintaining position screen?
Issue 2: some of position has two cost center, i have maintained two cost center(cost center 1:90%,cost center 2:10%) percentage in the tab of cost distribution with trasaction code ppome.when i post to accounting,it only post to master cost center 100%,it can not distribute two cost center, Could you please tell me the reason?
Looking forward to your reply.
Best regards,
Merry

HI,
Plz check with ur FICO Consultants as master Cost Center r desgined by them
They will Loop group of Cost Centers to Master Cost Center.
This concept has started in ECC 6.0 Version
Regards,
Kiran

Set up new partner fucntion as cost center number type

Hi all
can we set up new partner function, set the type of partner number as cost center number ?
I tried in table TVPA, created value table as CSKS.. but when I config the partner function.. saying this type is not defined..
what's the problem? thanks

Hi,
If you got your answer and if don't mind, can you share with me. I have similar issue in SD side.

Setting the cost center ranges in BD21

Hi All
The BD21 transaction code is used for transfer the data between the two system by change pointer.
is it possible to setting the cost center ranges In BD21 transaction code.
Please Confirm
Thanks & Regards
K.Gunasekar.

Hi All
I am planning to schedule the COSMAS report in background mode by using Varient.
is it possible to setting the cost center message type COSMAS varient ranges In BD21 .
Thanks & Regards
K.Gunasekar.

Cost center set-up

Hello,
   Can anyone let me know if there is any field in the cost center master data to populte the legacy cost center number.
Aslo , kindly let me know how do we decide the funcational areas to be assigned to cost centers and what kind of reporting does func area provide.
please let me know.
Thanks

There is no specific field to record the legacy cost center in the cost center master data. Said that, one can, however, add additional fields to cost center master data, if it is absolutely critical in the long run.
To do this, use enhancement COOMKS01 Cost centers: User-defined additional fields in master data record. You can maintain the additional fields on a tab page in the relevant individual processing of the master data. You can use these additional fields to select master data in selection variants for deletion or for list display
You create additional fields in Customizing (IMG) for Cost Center Accounting. Choose Master Data > Cost Centers > Program Enhancements for Cost Center Master Data .
For more information on enhancement COOMKS01 see the documentation for the enhancement. You can display this documentation when using the enhancement transaction CMOD by choosing Display SAP doc.
You may, also want to consider any existing fields to be renamed via CMOD as legacy cost center. These fields could be probably used in evaluation for reporting purpose.
Functional area are used to classify operating expenses according to functions (for e.g)
·         Production
·         Admin.
·         Sales
·         R&D
Functional area is used in Cost of Sales accounting!

Sales order - cost center posting

In a sales order, the field cost center (header rellated) appears only by entering an order reason.
Are there other possibilities to open cost center field for entry?

Hi,
If the account in question is defined as cost element (KA03), then it requires an assignment to CO. Profit centre is not sufficient, as it's not a CO entity, but EC-PCA. If you want to set different cost centre depending on input paramteres (plant), you can define a substitution (OKC9). Otherwise, if you just want to set a default you could use OKB9 or KA02.
Regards,
Eli

Report Painter - How to identity statistical orders in a Cost Center Report

Hello,
currently I am in the process of building a cost center report based on reporting tabel CCSS.
This report should list all primary and secondary costs which are charged to a specific cost center/cost center group .
The cost center or cost center group is given in the general data selection.
All direct primary cost postings are identified in rows like this:
- Cost Element (SET): cost element group A1, A2,...Axx
- Business Transaction Type: COIN
All primary cost postings deriving from (real) internal orders are identified like this:
- Cost Element: 1 to 9999999999
- Business Transaction: KOAO
- Partner object number: 0 to 99999999
Now here is the problem:
The controlling department requests to identify all primary cost postings to the given cost center which have been postet to a statistical internal order at the same time. The most part of the primary costs have been directly postet to the cost center in the Additioanal Account Assignments. But some have been posted to the cost center and at the same time to a statistical internal order.
Looking into BSEG I can quickly identify these line items as they have a value in BSEG-KOSTL and BSEG-AUFNR.
How can I select these items in a report painter report?
I would like to separate all items whith connection to statistical int. orders from those with no connection to internal ordes.
Thanks for your help!

Dear Elli,
Dear SAP-Gurus,
once again, thank you for your quick reply.
You hints and remarks are very much appeciated.
My problem seems to be slightly more complicated than what I had expected.
All postings to the cost center/cost center group are actual postings. The cost center is the "real" cost element, there are no postings of value type 11 here.
Most postings have the cost center as the only cost element, but others additionally mention a statistical order.
My goal is to seperate those postings to the cost center [as (real) cost element] plus the statistical order from those with only the cost center.
I would also like to sort these postings by the order number.
I could easily write two reports:
One for the cost center and another one only for the statistical orders. The latter would use value type parameter 11 (as you proposed!). Unfortunately, I do not know all order numbers tied to the cost center. As table BSEG is not suitable for SAP Query, I run into deep problems here.
I know I have problem in the design of my report here and I would like to sort out, which options I have.
Is Report Painter a suitable tool for me here anyway?
Thanks again!
Karsten

Setting Cost Center Satus

Similar Messages

Maybe you are looking for