Setting error messages

Hi Guru,
In a process chain, I have a meta chain as a local chain process.
I've set this local chain process to send an error message if it fails.
This local (meta) chain itself contains several processes. I see this when I double-click the local chain.
One of the processes also will send an error message if the loading fails.
What will make the local chain in the process chain trigger the error message? Only when the meta chain fails? If so, does this mean I need not set the local chain to send error message since I already set it in the meta chain?
Hope you can give me an advice.
Regards,
Bryan

if you just need to know that your load failed then u already have the message coming from the meta chain.
But u might not know that the actual Process Chains also has failed ( u might ignore). So it is better to have the message at both the places. This would be useful if you are using the meta chain ( local process chains ) in mulitple Process chains..
Regards,
BWer
Assign points if helpful.

Similar Messages

  • Object variable or With block variable not set error message

    When processing the Rate application I get a "Object variable or With block variable not set error message" What is causing this error and how do I fix it?

    Hi Brian,
    I'm afraid that in some ways this reply won't be very helpful though it may help you save some time. 
    The error message you describe is a very generic one thrown by Microsoft .NET (the programming platform that SAP is written with, see the link at the bottom of this message) and not being 'handled' by SAP. 
    This means from a SAP perspective that any one of many unrelated things may be causing the error and that it gives you virtually no help in tracking the problem down in SAP.
    We've plagued by this message quite a bit, my advice is to look for clues at to what may be happening elsewhere, e.g. try:
    1. The windows event viewer, if you are in a multi-server environment then check the event log on all machines.
    2. The SQL Server event log (this can be found in Management Studio - Management - SQL Server Logs assuming you're using SQL Server 2005)
    3. IIS logs, usually these are text files in the following location -
    HTTP.SYS Error Log - %windir%\System32\LogFiles\HTTPERR
    IIS Website Log - %windir%\System32\LogFiles\W3SVC#
    It is dull work trawling through all these places looking for error events with a timestamp similar to the time your error was encountered, but by doing this we've been able to troubleshoot some issues that otherwise would have taken us ages to rectify via trial and error.
    Sorry that there is no definitive answer, but if itu2019s of any help there's many more of us out there who this error message causes trouble for.
    Regards,
    Iain
    Microsoft "Object variable or With block variable not set" error message link:
    http://support.microsoft.com/kb/316478

  • How to set error message for 541 Movement type

    Dear gurus,
                I want to know that is it possible to set error message through any configuration? My requirement is that when we create issue document using m.t 541 it will not allow me to process that document without releasing PO document.so for that i want to set error message.
    <removed by moderator>
    Message was edited by: Jürgen L

    Hi,
       The subcontracting goods issue can be done even without PO reference. If your organization is strictly following the goods issue against PO only and you want to restrict the goods issue if the PO is not released, then you may check the below option. Please note that the below option is available in standard only from EHP 4 or above.
    1. Refer the KBA: 1915825 - Transfer Posting reference to a Purchase Order in MIGO and activate the PO reference option in MIGO - Transfer posting.
    2. Restrict the use of 541 movement in MB1B - Go to OMJJ and enter movement type as 541. Now go to "allowed transactions" folder and remove MB1B. Now the user cant use 541 in MB1B.
    3. Maintain the field - Purchase order as mandatory field for the movement type 541 in OMJJ.
    4. Train the users to use MIGO - Transfer Posting - Purchase order option for goods issue with 541 movement.
    5. If the PO is not released, system wont allow to use the PO in MIGO - Transfer Postings.
    6. If the user is selecting Transfer Posting - Other, system wont check the PO and hence it will allow to post the goods issue even if PO is not released. You may take organizational measures to restrict the usage or you may check for authorization concept - Refer the note: 773003 - MIGO: No authorization object for action/reference document
       If you are below EHP 4, there is no standard functionality available for the requirement as of my knowledge. If so, you may go for development to restrict the same.
    Regards,
    AKPT

  • How to set error message inside the loop...module pool

    Dear all,
         Am creating Table Control without wizard. In that i am looping the values, that is, Once if i entered 5 digit values means, 12345-08... the values should be stored in z-table like this 12345,12346,12347,12348 . That is 5-8 it as to update in z table. for this i createdloop at itab and inside that i written a code to count the value and all. and also its clearly updating the value in ztable too. now i want to know, if once again i entered the same value means, like 12345-08.. it as to show error messge.I dont know how to set the condition with error message inside the single loop .... Its all comes under module pool program.
    Thanks,
    Santhosh.R

    If i understood your doubt, here goes the answer.
    LOOP AT itab INTO wa_itab.  " This is your loop
      l_tabix = sy-tabix. "l_tabix receives the line of the loop
      READ TABLE itab WITH KEY itab = wa_itab.  "itab is the same tab of your loop
      IF sy-subrc EQ 0 AND l_tabix NE sy-tabix.    "Here the sy tabix have the value of the read table.
    *     Here you do your error treatment.
      ENDIF.
    ENDLOOP.
    Explanation: When you are looping your internal table, you use a READ TABLE to see the already recorded registers. If the read table finds one register (sy-subrc EQ 0) and the this register is not the one of the current line (l_tabix NE sy-tabix). It means you have a duplicated register.
    Maybe there is someway easier to do this, but this is what i thought now.
    I hope this was your doubt hehe.
    Thales Schmidt

  • Set error message in sale order

    Hi,
    I want to put set the error message for given fields in sale order.So that order can not be save without filling the given fields.
    Fields are -
    Shipping type
    Personnel Number
    Material freight grp
    Net value
    Pricing
    Harsh

    Hi Harsha,
    My thoughts item 2,4 & 5-
    1.Shipping type
    2.Personnel Number - Since this is partner function coming from your customer master, am not sure if it can be covered with incompletion log - if not you would need a piece of abap code in save_document_userexit to check if the partner function was filled.
    3.Material freight grp
    4.Net value - If the sales order item category needs to be priced, then this field is already marked required for sales document completion. No change needed
    5.Pricing - If the sales order item category needs to be priced, then this field is already marked required for sales document completion.No change needed
    regards
    sadhu kishore

  • MB21Reservation - How to set Error Message?

    Dear Experts,
    For a material say 123456, in the material master Purchasingset OB (Obsolete identified Blocked).
    1. Then when i do reservation through plant manitenance order, the system issue us the error message(its correct)
    2.But when we do MB21-create reservation using 201 movement type, the system allows to create reservation for Material 123456, but it should not allow - it has to issue Error Message
    so how to set in SPRO to issue Error message for this scenario and how to stop creating the reservation for OB set Material in MMR.
    Its urgent, please help me to solve this
    Regards
    Saravanan S
    Edited by: Subramania Saravanan on Jul 20, 2008 9:10 AM
    Edited by: Subramania Saravanan on Jul 20, 2008 9:55 AM

    Hi Friends.
    The solution is...go to SPRO-Logistic general-Material Master-setting for keyfields- Define Material Statusthen double click on OB(Obsolete Block Indicator), then you can see for various process..then assign B(error message) for Inventory management.
    After settings is done, try to do set OB in purchasing view in MMR for a material, and try to do reservation for the material..system states the Error Message.
    Thanks
    Saravanan
    Edited by: Subramania Saravanan on Jul 20, 2008 1:09 PM

  • Deletion Flag setting Error message for production order

    "Unprocessed future change recs for orders prevent del. flag/completion"
    I tried to used COFC and CO1P but didn't work out?
    How to fix this issue i am trying to set deletion flags for certain production orders?
    If i even found errors in final confirmations how to fix them

    Hi Aparna,
    This is absolutely fine to set the deletion flag to archieve the Production Orders.
    For this error, which you are getting, there could be entries in COGI or CO1P..
    Whether you are using Process Control (check in OPK4)?
    If that is the case you should have got the entries in CO1P.
    Can you see any entries in COGI? even 102 movement against the order?
    Check once again and revert for further discussion..
    Regards,
    Siva

  • How do I fix the uninstal set error message that continues to pop up

    when FF is open and I click on any item a message appears as follows: [JavaScript Application] ! uninstal set. This message appears each time I press the left mouse button and will not dissappear until i click on OK. How do I fix this

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Error message I need while creating PO

    Dear Experts.
    I need to set error message when we try to convert deleted purchase requisation into Purcahse order.
    Pls can any one help how to set.
    Thanks in advance,
    With Rgds,
    Vinod

    Try setting the message 06  050  Purchase requisition & item & already deleted to an "E" in the purchasing system messages in the SPRO path Materials Management -> Purchasing -> Environment Data -> Define Attributes of System Messages and then choose System messages.
    Hope this helps.

  • Reg. Error message during Purchase order more than PR.

    Dear Sir
    After putting Purchase order for a Purchase requisition we can able to rise Purchase order for a PR. We a error message. Kindly give the solution this problem.
    How to set error message in this case.
    Thanks
    Rajj.

    Hi
    If u want to restrict PO creation with more than PR Qty u can set error message in OME0 or path as follows
    SPRO>Materials Management>Purchasing>Environment Data>Define Attributes of System Messages-->system message
    06 076
    Set the message no : 06 076 as error messages.
    Then when All The PR qty already convert to PO,then system will not allow another PO to created for this PR.
    Vishal...

  • PO Error Message: 'Foreign Trade data: incompletion log'

    Hi,
    I have all set to disable the possibility to save purchase orders with missing foreign trade data but when I try to save the document without going to the respective tabs I'm able to save it without having any error message.
    What can I do to disable this possibility.
    Thanks to all.
    Best Regards,
    NRRibeiro.

    Hi,
    Set  Error message for application 06 and message No 698 as  E for "Import data incomplete or does not exist" in the following path:
    SPRO---- >MM> Purchasing> Environment data>Define attibutes of system message>system message
    Regards,
    Biju K

  • Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other devices.

    Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other apple devices I have.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
     Cheers, Tom

  • Getting error message that states itunesexe has been set to run in compatibilty mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it .How do i turn off compatibility mode?

    recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.

    Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself): 
    iTunes for Windows: How to turn off Compatibility Mode

  • I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • Error message: The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, qu

    Hello all,
    I can't open a PP project without this error message appearing:
    "The preset used by one or more sequences in this project requires third-party components that could not be located. These sequences will be modified to use a custom sequence setting instead. To continue editing using the original preset, quit the application without saving the project, reinstall any third-party components that are required and reopen the project".
    What I had been doing before this occurred was editing a PP project using ProRes sequences and multi-camera editing. Multi-camera was not working very well and after a few attempts to fix that I gave up and finished the job cutting 3 layers of video instead. AME refused to render the three finished sequences of over 1hr duration so rendered final videos from the PP sequences.
    I tried deleting plists for AME, PP and QT, repairing disc permissions and rebooting but there was no improvement.
    Client is satisfied for now but will want to come back to this job at a later date so decided to uninstall and re-install AME and PP in the hope both would be ready to work properly when needed again. AME works fine in conjunction with a different PP project but now I can't open the PP project in question without the above error message appearing.
    Having searched the net it would seem that the problem may be caused by ProRes but I haven't been able to find a definitive solution for the problem. Does anyone know either:
    1. How to fix this?
    2. If I chose the "modified using a custom sequence setting", can I be sure that my sequences will look the same even if they don't use ProRes? The final deliverable format will be mp4 so as long as the overall look doesn't change then I can  afford a change in the edit codec. It's just that with three sequences over an hour long, I don't want days of work to be ruined.
    Other older PP projects of mine open and work fine.
    Premiere Pro CC 8.2.0
    Media Encoder CC 8.2.0.54
    OSX 10.10.2
    Any help would be greatly appreciated.
    Duncan.

    Adobe web chat come up with a solution.
    Open the PP project.
    Export your sequence or project as a Final Cut Pro XML file.
    Set up a new PP project.
    Import the Final Cut Pro XML file.
    This will get you back up an running.
    Since getting back to editing this project I have found that some things will be lost or change in using XML:
    You will lose position key framing, black video clips, dissolve fx, audio levels, audio dynamic fx, the ability to open a multi camera clip and change the camera view.
    You will keep cut points, crop fx.
    Not perfect but only took a couple of hours to save 3 days work.

Maybe you are looking for