Deletion Flag setting Error message for production order

"Unprocessed future change recs for orders prevent del. flag/completion"
I tried to used COFC and CO1P but didn't work out?
How to fix this issue i am trying to set deletion flags for certain production orders?
If i even found errors in final confirmations how to fix them

Hi Aparna,
This is absolutely fine to set the deletion flag to archieve the Production Orders.
For this error, which you are getting, there could be entries in COGI or CO1P..
Whether you are using Process Control (check in OPK4)?
If that is the case you should have got the entries in CO1P.
Can you see any entries in COGI? even 102 movement against the order?
Check once again and revert for further discussion..
Regards,
Siva

Similar Messages

Set error message in sale order

Hi,
I want to put set the error message for given fields in sale order.So that order can not be save without filling the given fields.
Fields are -
Shipping type
Personnel Number
Material freight grp
Net value
Pricing
Harsh

Hi Harsha,
My thoughts item 2,4 & 5-
1.Shipping type
2.Personnel Number - Since this is partner function coming from your customer master, am not sure if it can be covered with incompletion log - if not you would need a piece of abap code in save_document_userexit to check if the partner function was filled.
3.Material freight grp
4.Net value - If the sales order item category needs to be priced, then this field is already marked required for sales document completion. No change needed
5.Pricing - If the sales order item category needs to be priced, then this field is already marked required for sales document completion.No change needed
regards
sadhu kishore

How to set error message for 541 Movement type

Dear gurus,
 I want to know that is it possible to set error message through any configuration? My requirement is that when we create issue document using m.t 541 it will not allow me to process that document without releasing PO document.so for that i want to set error message.
<removed by moderator>
Message was edited by: Jürgen L

Hi,
 The subcontracting goods issue can be done even without PO reference. If your organization is strictly following the goods issue against PO only and you want to restrict the goods issue if the PO is not released, then you may check the below option. Please note that the below option is available in standard only from EHP 4 or above.
1. Refer the KBA: 1915825 - Transfer Posting reference to a Purchase Order in MIGO and activate the PO reference option in MIGO - Transfer posting.
2. Restrict the use of 541 movement in MB1B - Go to OMJJ and enter movement type as 541. Now go to "allowed transactions" folder and remove MB1B. Now the user cant use 541 in MB1B.
3. Maintain the field - Purchase order as mandatory field for the movement type 541 in OMJJ.
4. Train the users to use MIGO - Transfer Posting - Purchase order option for goods issue with 541 movement.
5. If the PO is not released, system wont allow to use the PO in MIGO - Transfer Postings.
6. If the user is selecting Transfer Posting - Other, system wont check the PO and hence it will allow to post the goods issue even if PO is not released. You may take organizational measures to restrict the usage or you may check for authorization concept - Refer the note: 773003 - MIGO: No authorization object for action/reference document
 If you are below EHP 4, there is no standard functionality available for the requirement as of my knowledge. If so, you may go for development to restrict the same.
Regards,
AKPT

Change username to "last name" in error message for blocked order

Hi,
is there a way to change the user name to the "last name & first name" for error messages about blocked orders, so that the you can know the real name of the person who is blocking the order.
Thanks & kind regrads,
Oliver
Edited by: Oliver Pregler on Nov 22, 2010 11:59 AM

Hi,
I hope the error message that you are talking of is in the bdoc and not a SAP GUI one. There are two ways to handle this,
one is crude way and other a bit long way:
1. change the Message in message class itself....but this will wipe out after upgradation and all...
2. code this change in the Dataexchange badi and manipulate the text as you want......
Hope it helps.
Regards
Sidd

Error - Settlement for Production order Co88

Hello,
Before Dec 2009 the FG material xxxxx has been goods movement post without maintained split valuation. Then Dec2009 the material xxxxx has been extended to split valuated.
While process of production order settlement against said material through CO88, we are facing one error Valuation Type not set for material xxxx.
What could be the reason that system is showing the error.
Best Regards,
Avijit

Hi,
If no valuation category has been assigned to a material (MBEW-BWTTY is
blank), and you wish to assign multiple valuation categories (split
valuation) to this material, then the material must not have linked
documents and the stock must be zero for both the current and previous
periods.
The reason of this restriction is that objects that are open and
refer to valuation data without split valuation can result in
inconsistencies if the valuation category is changed.
So If you want to subsequently change the valuation control for a material
to split valuation, you should previously check the following:
- No stock is available for the material
- All production orders must be closed
- No purchase order can still be opened
These checkings will avoid inconsistencies or undesired side-effects.
Consequentely you can not change a valuation category of a material
if there are purchase order item lines (even if the purchase order is
completed) or if a stock balance exists for that material.
For more information concerning limitations associated with changing the
valuation category, you can see note 30656. (Although this note is
used primarily regarding a change to the Unit of Measurement, the
functionality is very similar).
Please also check note 155874, which outlines what must be performed
in order to change the valuation category.
Best regards,
MLM

Issue/Bug in reservation for production order

Hello,
We have a bug with the reservations for a production order, which in turn is causing a problem with clearing a cogi error. I have a COGI error for material 123 in plant A.they are trying to remove 14,312 lbs that was confirmed to production order 1000123. According to the error message the production order only has 6,400 lbs that can be removed. in CO14 my material 123 show two quantities in different batch 14,312 and 6,400. In Reservations shows only 6,400 as being consumed. this amount should be 20,712 (14,312 + 6,400). The reservation did not get updated correctly. Why this happen? How could we correct this RESERVATION to add up 14,312 in my material 123)?
Please give me feedback ASAP, need help.
Thanks and Regards,
JJ

Hello,
thanks for the answer you have given me..
as to make sure, does it is safe to delete the error? even that it tells that RE qty moved exceeded by 7.912 lb? it so weird how come was the reservation was complete since when they raised it it just 6,400 it shows? how could i make sure that document goods movement for my production order as mr. pradeep told me to do? what should i do?
thus when deleting the error in COGI, it will change the my material in CO14 COMPLETED and have QTY WIDTHDRAWN and will be encluded in the same RESERVATION NUMBER?
Anyone please revert back to me.
Thanks
JJ
Edited by: John Jay Palisoc on Jul 22, 2008 7:08 AM
Edited by: John Jay Palisoc on Jul 22, 2008 8:02 AM

Material status in master data set not allow create production order. but..

Dear All expert.
There is one case I don't understand, the component material within BOM had been set material plant status which it is not allowed to create Production order ( Porder header Msg & PO/Network item msg = B in OMS4).
If user use tx:CO01 for create production order, the error message block production order can't be created. It is good .
However, when user is using Tx: CO41 to convert planned order to production order with that material ( status which not allowed to create production Order) . it is successfully without any error message .. User successfully create production order without limit.
Therefore, is there any configure in IMG was wrong?
thanks for reading.
Marco

Dear R.Brahmankar,
I had followed your instruction to check. It is very helpful.
when I check program in CO41 (saplcoup), I found that it only check material status (FG) on top level of BOM .
Its don't check component material.
Function CO_ZF_CHECK_MATSTAT_POS component item in BOM , the program will not check item plant status.
When I use TX: CO40 to test. I found that CO40 with Program LCOSD1J - CHECK_MATSTAT_COMP have component material status check.
I'm not sure is that genic CO41 don't have component material status check?
ths alot
Marco

Set Mass Deletion Flag for production orders

Hi,
I am planning to set mass deletion flag for production orders using programme PPARCHP1.
My users dont have access to SE38/SA38 and they cant run this program from directly.
I dont wnat my users to do this preprocessig using SARA or CO78 as it will give access to them for whole archiving process + it only works in background.
I am thinking to create a Z tocde for this program and use it in dialogue mode also. Do you guys see any aftereffects with this process?
Let me know if creating a Z tocde sounds a good idea?
Edited by: santosh sarda on Mar 10, 2011 3:23 AM
Edited by: santosh sarda on Mar 10, 2011 3:28 AM

The standard SAP procedure to set the archive is that
- you run COAC in background to set deletion flag and deletion indicator. It should be set as the variant and run periodically (i.e., monthly).
- The system get all orders with DLV status in the past xx days depending on your variant to set deletion flag.
- Also it will change the status DLFL to DLT based on your residence time 1.
- The orders with DLT that reside in system longer than residence time 2 then archive.
This should be done by IT department or background jobs. Not the users.
Which, in my opinion, is enough. However, if you do need the user to select by themselves which orders they want to set deletion flag (why is that?). Then you may want to explore enhancement.
For the sake of simplicity, I will recommend to use user status (normal cohv can change that, as we know; therefore no new fancy screen needed). Then develop the user exit to set deletion indicator in PPCO0002 - EXIT_SAPLCORE_001 based on user status. The rest of the procedure should remain the same.
If you want to allow user to do every steps and develop some Z* screen for users, they must have the authorization for archiving anyway. They just don't have the t-code COAC, and SARA. In my opionion, it is overkill. Plus in terms of users, I don't think they have skills enough if there is some errors during archiving (i.e., logical file error, etc.).
Hope it helps.

Mass revoke deletion flag for Production order

Hi all,
As we know, we can use program PPARCHP1 to mass set deletion flag for production order.
now, i would like to revoke deletion flag, i had been use tcode: co02 Functions -> Deletion Flag -> Revoke to do it.
but, i have lots of production order, is there any standard program could mass revoke deletion flag?

Dear there is no standard functionality or transaction is available to revoke the deletion flag the only option is you have to do it manually one by one order through the option which you already mentioned.
Cheers
KK

Error during goods receipt of Finished goods for production order

hi friends
pls help me iam struggle this issue and mentioned the issue .
when i do goods receipt for production order system getting error like
No price could be determined for material/batch FG/ plant ZTP
     Message no. CK 465
Diagnosis
     The system could not calculate a price for material/batch FG/ in plant
     ZTP for valuation view 0, because none of the valuation strategies in
     valuation variant 007 was successful.
System Response
     User-defined error management enables you to specify whether the message
     is an error message, a warning message or an information message.
     o   If you have defined the message as a warning message or an
         information message, the costing item will be entered in the cost
         estimate with a value of zero.
If you have defined the message as an error message, the cost
estimate contains an error or errors.
-   In the case of a material cost estimate, the system sets the
    status KF.
-   If it is a cost estimate without quantity structure, or base
    object cost estimate (that is, a unit cost estimate), the
    system cannot proceed with costing until you have corrected the
    errors.
If the system issues a termination message, the cost estimate cannot
be processed, and processing is terminated.
procedure
    o   Check the master data for material/batch FG/ in plant ZTP.
    o   If you have authorization for Customizing, check the valuation
        strategy for materials in valuation variant 007.
    Note
    If the message is a warning message or an information message, there is
    a danger that materials with errors will be ignored by the system.
    If, because of this, you issue a warning message and at the same time
    include materials with a zero value in cost estimates, you can make the
    following settings for these materials in the costing view of the
    material master:
1. Enter a very low price in the planned price 1, 2 or 3 fields
      manually, for instance 0.01 USD. These prices are used for costing
      purposes only; they are not read by other applications.
2. Enter the highest price unit possible, for example 10000.
      Note: If you enter a new price unit that is higher than the costing
      lot size, the system increases the costing lot size accordingly.
3. Change the valuation strategy, such as strategy 4, where you could
      enter the planned price field in which you entered the low price.
      The system now costs as follows:
      Using the valuation strategy, the system finds planned price 1, 2 or
      3. Due to the low price and high price unit, the system rounds the
      value to zero. However, the cost estimate still obtains status KA
      (free of errors), and no error message is issued.
      This procedure can be used for all materials that have caused error
      message CK465 to be issued.
with regards
dinesh
Edited by: code acess on Nov 8, 2010 4:06 AM

hi ragavendra,
this is dinesh .i maintained the costing view and planned price. but again i have same error.so please reply me where i missed the data
with regards
dinesh
Edited by: code acess on Nov 9, 2010 4:01 AM

Error during Goods Receipt for Production Order

Hi All,
When using MIGO to post Goods Receipt for a Production Order, I got a customize message saying that the posting is only available between 2010.08.25 to 2010.08.27. I have checked in Business Add-in using SE19 but there are no implementation present. I know that in Logistic Verification MIRO there is a transaction OMRM to set messages. I would like to ask is there anything similar for MIGO.
Or is there any other place in Configuration which allows me to add these Customize message.
Thanks.
Edited by: jamison2004 jordan2004 on Jul 9, 2010 9:09 AM

Hello Jiaul,
Sorry I may have mislead you. The actual error message is "Goods Receipt for Production Order XXXX can only be made on 2010.08.25 to 2010.08.27". These two dates are the Start Date and FInish Date for the Production Order in CO03,
The Basic Start Date for the current Production Order is 2010.08.25
The Basic Finish Date for the current Production Order is 2010.08.27
I think what it means is that you can only Post Goods Receipt for the Production Order only after the Basic Start Date of the Production Order. Do you know where I can find the configuration for this message?
Thanks

Error in scheduling parameters for production orders

Hi Guys,
Greeting for the day u2026u2026u2026.
I am trying to create production orders creation for own order type ex MM01, but I am getting error message as u201C scheduling parameters are not defined for the order type u201C even though I have maintained following parameters as below,
Production scheduler -
xxxxx,
Detailed scheduling -
check box of scheduling ticked,
Rough cut scheduling --- scheduling id u201301, scheduling and generate capa requi,, boxes ticked,
Adjust scheduling -- requi to operation date,
Scheduling control for detailed scheduling ---backwards and check box of auto scheduling ticked
Operation segment ---setup,
All operation in order will be reduce
Do not reduce,
Could any one light on this issue,
Thanks in advance,
Mohan

Hi,
This error will come if you have not maintained Define scheduling parameters for production orders.
Check this order type whether linked with respective plant in OPU3.*And give production scheduler * mark ie, all.*
And in Define production scheduling profile - OPKP, link your order type in the page below.
In material master work scheduling view, input production sch profile or prod scheduler.
Regards,
Dharma

Error while doing Good Issue for Production Order using BAPI

Hi All,
I am facing an error like 'u2018Content of order 1011907: MDT218AJ10 transferred to interface (IMSEG): T-86410-71".
I have written the code as below. Please let me know what is missing when using the BAPI 'BAPI_GOODSMVT_CREATE'. What is the cause of this error ?
*Action in Transaction (GM_CODE)
*GM Code for Goods Issue for Production Order is 03
gs_gmcode-gm_code = '03'.
*Header Data
*Posting date
gs_header-pstng_date = sy-datum.
*Document date
gs_header-doc_date = sy-datum.
*Item Data
*Material
gs_item-material = zptp_s_rf_migo_261-matnr1.
*Movement Type
gs_item-move_type = '261'.
*Movement Indicator
gs_item-mvt_ind = 'F'.
*Stock Type
gs_item-stck_type = 'F'.
*Plant
gs_item-plant = gv_plant.
*Storage Location
gs_item-stge_loc = gv_str_loc.
*Quantity
gs_item-entry_qnt = zptp_s_rf_migo_261-menge2.
*Unit
gs_item-entry_uom = gv_uom.
*ISO code for unit of measurement
gs_item-entry_uom_iso = gv_uom.
*Order Number
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = zptp_s_rf_migo_261-aufnr
 IMPORTING
 output = gs_item-orderid.
*Reservation Number
gs_item-reserv_no = gv_resv_num.
*Reservation Item
gs_item-res_item = gv_resv_itm.
*Reservation Type
gs_item-res_type = gv_resv_type.
APPEND gs_item TO gt_item.
Calling BAPI_GOODSMVT_CREATE to create the Material Document Number
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = gs_header
 goodsmvt_code = gs_gmcode
 IMPORTING
 goodsmvt_headret = gs_headret
 TABLES
 goodsmvt_item = gt_item
 goodsmvt_serialnumber = gt_serial
 return = gt_return.
Thanks in Advance.

hi,
did you look at message ?
System says, there are differences between the interface data and the order data. It can be anything. I think you should check
data in the interface .
this is the long explanation of your message :
Diagnosis
When calling the function module MB_CREATE_GOODS_MOVEMENT or the BAPI GoodsMovement.CreateFromData (BAPI_GOODSMVT_CREATE) to post a goods receipt for a production order, there are differences between the interface data and the order data.
Example: The order was created for plant 0001, but plant 0002 is passed on in the interface.
The system checks this for the material and the order item.
System response
Due to this difference, the system cannot post the goods receipt.
Procedure
Check the data in the interface (IMSEG-WERKS, IMSEG-AUFNR). If necessary, correct the plant or the order number in the interface.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Feb 6, 2012 11:24 AM

Error while calculating variances for production order

Hi Gurus,
while calculating variances for production order i am getting the following error
"Cannot calculate scrap variances" ( Error message)
" no standard value estimate for material" (Warning message"
A standard cost estimate exists for the material at the date mentioned in the error in released status.
Please give solution for the error.
Thanks in advance n Regards
Arul.

Is there an itemization, generated for the cost estimate used to calculate the target costs?
Does the material components listed in the BOM of the cost estimate used to calculate the target costs, assigned to the operations in which they are used. Otherwise it is not possible to correctly report the variances and scrap when operations are confirmed.
Does the order for which the variances are calculated have a valid variance key. ?
Does the order have the status DLV (delivered) or TECO (technically completed). If the status was withdrawn, any variances and scrap variances are canceled.

Production scheduling profile for production order type 10 does not exist – SAP Message No.10085

When i tried to make confirmation for Production Order through CO15 transaction , i receive the following error message “ Production scheduling profile for production order type 10 does not exist – SAP Message No.10085 “
In Work Scheduling view, Production Scheduling Profile is maintained as per OPKP only.
How to check whether production scheduling profile is maintained for relevant order type 10.
To do this , i went to OPKP & KOT2_OPA transactions but i don’t know how to check. I guide me through with a screen shot.
Also, pls explain about “Order Type 10” and how it is linked with material and order execution.
Looking for a detailed explanation with screen shots , since i am new to SAP.
Thanks With Regards,
Dinesh Kumar V.

Hello Dinesh,
Please check the order type dependent parameter in OPL8 here you will get the Substitute Scheduler
Then go to OPCH and check valid production scheduling profile assign here as per OPKP to your production scheduler for your plant.
Production order have Order category as 10 Process Order 40 in standard SAP you can check this in OPJH.
Best Regards,
R.Brahmankar

Deletion Flag setting Error message for production order

Similar Messages

Maybe you are looking for