Setting External Destination

I have a website (made in VS 2005) that calls the creation of reports from Crystal Enterprise 10. I am trying to get it such that through the website coding I can modify the external destination that the reports are sent to, as they are different each time a report is run. So far I have not been able to successfully get this to work. This is what I am currently getting in CMC when a report is run:
Status: Failed
Printer: The instance is not printed.
External Destination: Not Authorized
Data Refresh Settings: Use the server defaults.
Start Time: 30/09/2008 2:25:59 PM
End Time: 30/09/2008 2:26:06 PM
Server Used: dest.reportjobserver
Error Message: destination DLL disabled. //dest... /CURRENT/ME/309/2009/Maintenance/M/:
I believe that I may inadvertently be setting the instance location, and that it why it is failing, but can't figure out how I should be setting the external destination then. The report runs fine from CE from the same user, even if I modify the destination directory to be what would otherwise fail. I've more than triple checked the security settings for the directory, but perhaps there is still something I missed?
I have tried to set this location through a schedulingInfo object by way of
ceSchedulingInfo.Destination.Name = destination
and directly from the InfoObject through ceReportObject.SchedulingInfo.Destination.Name = destination
and neither worked.
Any ideas?
Edited by: Ryan Beaulieu on Sep 30, 2008 10:51 PM

This forum is dedicated to topics related to legacy SDKs, including the Report Designer Component (RDC), OCX, VCL, and Crystal Reports Print Engine (CRPE).
Please post this query to the .NET Development - BusinessObjects Enterprise forum:
.NET SDK Application Development
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek

Similar Messages

Jdev11G XMLMenuModel : Setting the "destination" attribute for the itemNode

Hi,
I am trying to set the "destination" attribute for the itemNode in the metadata.xml.This is the URI to which the user must be taken on clicking that node. But it is unable to pick the URI set for the destination attribute and hence there is no navigation that happens.Using the "action" attribute works fine. But I need to use the "destination" attribute.
Here are some of the files:
The metadata.xml (root_menu.xml):
<?xml version="1.0" encoding="windows-1252" ?>
<menu xmlns="http://myfaces.apache.org/trinidad/menu">
<groupNode id="groupNode1" idref="itemNode1" label="Merchant">
<itemNode id="itemNode1" label="Sites" action="site_action" rendered="#{testBean.test}"
focusViewId="/common/site/Site.jspx">
</itemNode>
<groupNode id="groupNode2" idref="itemNode2" label="Settings">
<itemNode id="itemNode2" label="Page Template" action="template_action"
focusViewId="/common/template/TemplateRules.jspx">
</itemNode>
<itemNode id="itemNode3" label="Configuration Parameters" destination="http://www.google.com"
action="config_action" focusViewId="/common/others/ConfigurationParameters.jspx">
</itemNode>
</groupNode>
<groupNode id="groupNode3" idref="itemNode4" label="System Admin">
<itemNode id="itemNode4" label="Cache Invalidation" destination="/faces/common/others/CacheInvalidation.jspx"
focusViewId="/common/others/CacheInvalidation.jspx">
</itemNode>
</groupNode>
</groupNode>
</menu>
The faces_config.xml:
<?xml version="1.0" encoding="windows-1252"?>
<faces-config version="1.2" xmlns="http://java.sun.com/xml/ns/javaee">
<application>
<default-render-kit-id>oracle.adf.rich</default-render-kit-id>
</application>
<navigation-rule>
<navigation-case>
<from-outcome>site_action</from-outcome>
<to-view-id>/common/site/Site.jspx</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>template_action</from-outcome>
<to-view-id>/common/template/TemplateRules.jspx</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>config_action</from-outcome>
<to-view-id>/common/others/ConfigurationParameters.jspx</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>cache_action</from-outcome>
<to-view-id>/common/others/CacheInvalidation.jspx</to-view-id>
</navigation-case>
</navigation-rule>
<managed-bean>
<managed-bean-name>root_menu</managed-bean-name>
<managed-bean-class>org.apache.myfaces.trinidad.model.XMLMenuModel</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>createHiddenNodes</property-name>
<value>false</value>
</managed-property>
<managed-property>
<property-name>source</property-name>
<property-class>java.lang.String</property-class>
<value>/WEB-INF/root_menu.xml</value>
</managed-property>
</managed-bean>
<managed-bean>
<managed-bean-name>testBean</managed-bean-name>
<managed-bean-class>testBean</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
</faces-config>
Can you please tell me what else has to be set for the "destination" attribute to work?
Thanks,
Swapna

The code you sent is not clear, could you send your jspx page.
Thanks

Error when sending control recipe to external destination

Hi,
When Iam trying to send control recipe to external destination through CO53, Iam getting the status of the control recipe as 'Sent'. But when I check the tRFC log, I get the status, "connection closed (no data) ".
By selecting the line in the log and executing the LUW I get the message, target system/gate way not active.
In the external system I get the message " Illigal activity"
I checked the RFC connection in SM59 and connection is ok.
The RFC is working from SE37 and the control recipe can be processed without any issues through SE37. The problem is when I try to send from CO53.
Request your expert advice to solve at the earliest.
Thanks in advance
Prathib

Hi Prathib, Have you got the solution to this problem

System time was set externally in the past.

Hi Gurus,
In our production system,several warning messages have come up System time was set externally in the past. Wait 1 second(s).
But when i checked the system time it showing the same as OS's.
Could you please throw some information around this and how these warnings can be avoided?
Thanks
Sabya
BASIS ENTHUSIAST

Hi Sabyasachi,
What's your OS Version?
Is your SAP application hosted on Windows Server.
Please check-out SAP Note-447839.
Also to brief you about this common issue where in sometimes the OS time is reset back in the past and the SAP application observes this an warning and in severe situations as an ABAP dump.
On windows server, if the automatic synchronization of timezone is enabled it synchronizes to a master time server. Actually this should be fine, but in case of Windows server, what happens is that every time the synchronization happens from a master time server, the SAP server gets a hard reset i.e. Sudden decrease of time at the time of synchronization like from 11:45 AM to 10:45 AM. This kind of behavior affects the applications running on the server. This should have been soft reset i.e. 11:45 AM time should go back in time in fractions over the entire week (Soft Reset) until it is synced in real time. SAP applications running on windows server implemented with Hard reset of Time are absolutely not supported and in that case the hard reset must be refrained at all costs. Refer SAP Note 447839 for further details.
To narrow down the root cause of OS time shifts you can run a watchdog tool SAP time trace tool which logs the OS time every 5secs, so the next time whenever this occurs in the system it can be investigated what happened to the OS time at that instance.
If the described case matches with your scenario, you can disable the Automatic time synchronization feature on the windows server.
Regards,
Akshay

System time was set externally in the past. Wait 1 z second(s).

Hi,
We are getting the follwing message in our production environment.
System time was set externally in the past. Wait 1 z second(s).
The system time is same as SAP time
Pls let me know of what has to checked to correct the issue
Edited by: Balaji Rajendran on Jun 20, 2008 5:18 PM

Hi,
Time zone can be changed at SAP level and this reflects at database level.
Have look at these transactions.. Check your logs and see wthhr someone changed the time zones.(sm20/st03(n)/stad)
STZAC Maintain time zone act.in client
STZAD Disp.time zone activate in client
Also check note 198411
Rakesh

Each target assigned to a job must have a setting and destination.

Simple. Basic Question.
Trying to use Compressor to change the codec on my flip cam to make it more compatible with FCP X.
I have dragged a source and destination into the batch. But it keeps giving me the error "Each target assigned to a job must have a setting and destination." I saw others had this same issue and the solution I saw was to set a destination for the video AND audio. How do you assign for BOTH? I thought it was just a drag and drop method into batch ...

You didn't say what your settings were. But tif it's not one of the DVD presets, you shouldn't ordinarily be faced with separate audio and video streams with the majority of presets. Here's an example of a batch with one source file, multiple targets and multiple destinations. Only the DVD Preset has separate audio and video…and those do require that destinations be specified. If the destination is not specified, it defaults to Source.
Good luck.
Russ

Set External Field Value by Workflow

Is there any way to Set External Field Value by SPD 2013 workflow?

Hi j.kiani,
According to your description, my understanding is that you want to update an external column in a list by SharePoint workflow.
I did a test:
Create a list with an external column
Create a workflow , and add ‘Set Field in Current Item’ action, select the field is the external column, set the value to a value from the External Content type data source
Publish the workflow and start it on an item
The external column was changed to the value that I set in workflow. However, when I refreshed the external column by clicking the ‘sync’ flag, the data was changed to the old value.
I used ‘Update ListItem’ action, the result was same
It seems that there is not an OOB way to change external column with SharePoint workflow. You can change the external column by SharePoint web OOB way (Editing item) .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Error in setting up destination name in depolyment descriptor

the error is, 
[EJB:011113]Error: The Message Driven Bean 'MessageAccess(Application: mssp, EJBComponent: mssp-MDB.jar)', does not have a message destination configured. The message destination must be set using a message-destination-link, destination-resource-link, destination-jndi-name or a resource-adapter-jndi-name.
 the ejb-jar entry is, 
<message-driven >
<description><![CDATA[Bean to access messages]]></description>
<display-name>MessageAccessBean</display-name>
<ejb-name>MessageAccess</ejb-name>
<ejb-class>com.valimo.mssp.jms.j2ee.MSSPListenerBean2</ejb-class>
<transaction-type>Container</transaction-type>
<acknowledge-mode>Auto-acknowledge</acknowledge-mode>
<message-driven-destination>
<destination-type>javax.jms.Topic</destination-type>
</message-driven-destination>
</message-driven>
 and weblogic-ejb-jar entry is like, 
<weblogic-ejb-jar>

<weblogic-enterprise-bean>
<ejb-name>MessageAccess</ejb-name>
<message-driven-descriptor>
<destination-jndi-name>topic/Topic</destination-jndi-name>
</message-driven-descriptor>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
 
can you help?

They should be able to log into their account via http://appleid.apple.com and update their name.

[JS, CS3] Setting Page Destination on Button

Hi
I unsuccessfull try to set the a Page Destination on a Button.
The script loops through the Document and picks certain textframes, which contain the page.name as text. inside the loop I do this:
// START LOOP
// Getting the Content of Textframe -> this is the destination Page Number
myDestinationPage = myDocument.pages.itemByName ( myDocument.pages[ pageIterator ].textFrames[ textFrameIterator ].contents );
// Creating a HyperlinkPageDestinationObject
myHyperlinkPageDestination = myDocument.hyperlinkPageDestinations.add( myDestinationPage );
// Creating a new Button over a certain area on the actual Page - setting visibility off
myButton = myDocument.pages[ pageIterator ].buttons.add({visibilityInPdf:1181247844, geometricBounds:[ myDocument.pages[ pageIterator ].textFrames[ textFrameIterator ].geometricBounds[ 0 ],12,myDocument.pages[ pageIterator ].textFrames[ textFrameIterator ].geometricBounds[ 2 ], myDocument.pages[ pageIterator ].textFrames[ textFrameIterator ].geometricBounds[ 3 ]]});
// Creating an hyperlinkPageItemSource = the Actual Button myHyperlinkPageItemSource = myDocument.hyperlinkPageItemSources.add( myButton );
// Creating an Hyperlink
myHyperlink = myDocument.hyperlinks.add( myHyperlinkPageItemSource, myHyperlinkPageDestination );
//The Destination shall be a Ceratin Page so I add a gotoAnchorBehavior
myGotoAnchorBehavior = myButton.gotoAnchorBehaviors.add();
// Now I try to set the Anchor Target. I think that's not working...
myGotoAnchorBehavior.anchorItem =myHyperlink;
// END LOOP
The Buttons are there, the Destinations as well, but the ceratin button has not the desired Page as destination. Does someone have a hint on this topic?
Thanks and greets
Stefan

Hi Keith,
myDoc.activeLayer = myDoc.layers.item("Layer 1");
Kasyan

Issue with setting dynamic destinations on (Flex) RemoteObject

When setting the AMFChannel on a RemoteObject I am seeing the following behavior using builds 3.2.0.3978 and 3.0.1.1755:
faultCode:Client.Error.DeliveryInDoubt faultString:'error' faultDetail:'Invalid URL url: 'http://mymachine:8080/myService/messagebroker/amf''
The same client code works without incident running against 3.0.0.544.
       private function invokeGetCompoundName():void
            var remoteObj:RemoteObject = new RemoteObject();
            remoteObj.addEventListener(ResultEvent.RESULT, resultHandler);
            remoteObj.addEventListener(FaultEvent.FAULT, faultHandler);
            remoteObj.destination = "myServiceDestination";
            var channelSet:ChannelSet = new ChannelSet();
            var channel:AMFChannel = new AMFChannel("my-amf", "http://mymachine:8080/myService/messagebroker/amf");
            channel.pollingEnabled = true;
            channel.pollingInterval = 2500;
            channelSet.addChannel(channel);
            remoteObj.channelSet = channelSet;
            remoteObj.getCompoundName();
What I've observed is that in the more recent builds the BlazeDS server is outputting header information with mustUnderstand=true versus mustUnderstand=false when using 3.0.0.544.
(myService does use objects with session scope)
Version: 3
(Header #0 name=AppendToGatewayUrl, mustUnderstand=true)
    ";jsessionid=CD046D04F6D5B4D96112319D70A511AE"
(Message #0 targetURI=/1/onResult, responseURI=)
    (Typed Object #0 'flex.messaging.messages.AcknowledgeMessage')
      destination = null
      headers = (Object #1)
      correlationId = "588D4A0D-55E3-9EAB-395D-976720ECE4D6"
      messageId = "91A2CA0E-350B-879D-BDD6-AA2B04895C6C"
      timestamp = 1.239490699781E12
      clientId = "91A2C99B-761E-44F7-B8B3-4AA861B3148B"
      timeToLive = 0.0
      body = (Typed Object #2 'com.mypackage.CompoundName')
        objectName = "SomeObject"
        fieldName = "SomeField"
I would appreciate any insight into this issue. Might this be a bug, or is there something I'm doing incorrectly but getting away with in 3.0.0.544?
Is there a way to configure the newer server versions to produce the same header output as before, if that is in fact the issue?
Thank you,
David

> Leah-L Said:
> We were able to replicate your problem here as well. We are also seeing that the destination directory for the build is determined and set *before* the pre-build VI is run. Just so I am aware, have you found any other documentation concerning Pre-Build VI's?
Cool, thanks for confirming that I'm not crazy. And no, I haven't found any documentation concerning this phenomenon.
> gmart Said:
> it potentially processes the information and so simply updating values may not have the desired effect
Good to know. I think this should be in the documentation somewhere though, perhaps in the detailed help for the Get/Set Tag invoke nodes for a Build Spec reference.
To fix the issue, I've just made my own "Build Executable" vi that sets the tags before the build is started. It uses the same VI that I attached earlier (confirming that the VI works). Instead of starting the build from the project window and having a pre-build vi execute, I run this stand-alone VI and it builds the app.

Problem setting External break point..

Hi All,
I am using EP6 SP14 and R/3 4.6C. Java Webdynpro aRFCs to connect to R/3 BAPIs. I am having problems setting up external break points. I don't see Debug option in "Utilities -> Settings -> ABAP Editor". Do we have this option in R/3 4.6C? If yes how to enable the option? If no, what is the work around to debug the BAPI through Portal.
Helpful answers will be rewarded.
Regards,
Uday.

Hi,
Pl go through this
Debugging ABAP Code from within Web Dynpro Application
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0e9a9d90-0201-0010-478e-991dbea73a30
It explains step by step process
Regards
Ayyapparaj

10.5.5 sets external volume to read-only

Bizarre.
I have 4 external volumes (2 FW800, 2 USB 2.0) and one of the volumes suddenly shifted to read-only status after updating to 10.5.5 this afternoon. At least, that's the error message I get when I try to touch a file anywhere on the volume.
Problem started when I tried to open iTunes and got the error message "The folder 'Music' is on a locked disk or you do not have write permissions for this folder." Get Info indicates that this user account does, in fact, have Read & Write permissions. Group and Other permissions are set to Read Only. Get Info does not allow me to select the lock to make changes, however, but nor is the "Locked" checkbox selected.
In Terminal, permissions for Volume "Little Brother" are indicated as:
drwxrwxr-x 11 <adminuser> staff 442 Aug 13 13:11 Little Brother
The Music folder in question appears to have the appropriate permissions as well:
drwxr-xr-x 14 <adminuser> staff 476 Sep 18 11:17 Music
Aside from the 10.5.5 update there have been no changes to the filesystem, and no files written to this drive.
I can touch files on each volume except for "Little Brother". Aside from chmodding the **** thing, does anyone have any recommendations for what I can do?
Thanks.

I think Ill just keep responding to this, every time Apple issues an update (patch) that causes the problem to resurface. I have contacted tech support. And they tell me they no nothing about this and have never heard about it. Then I tell them to check my support records. The issue is well documented there and goes back for many, many months.
So, today I came home to find that apparently my software update utility (which is set to NOT update the software) has updated my software. My brand new Western Digital external 2TB disk is off line and my Time Machine drive (1.5TB Maxtor) now appears to be completely after being kicked from the USB ever friggin time there is a software patch.
I'm trying one last time to recover following the procedure above - but once again I am running the procedure above against my 2TB user disk - so hopefully in 8 or 12 hours Ill know something. Thanks again to all the Windows developers who are now obviously working at Apple.

Display broken - set external display as default

my powerbook g4 screen is kaput. the computer is working fine otherwise and detects the external display i plugged in, but i'm not sure how to set the external display to be the primary display without being able to see the 'system preferences' menu on the powerbook display. any ideas? thanks

Hi, woody02, and welcome to Apple Discussions. Try pressing the F7 key on your keyboard to toggle between extended-desktop mode, which I presume your Powerbook is in now, and display-mirroring mode. In mirror mode, you'll have the menu bar and desktop items on your external display, and you'll be able to set your monitor preferences from there. If this doesn't work, post back for other ideas.

Set External Display as Default?

I have a 15" Powerbook with OS X 10.4 installed. I have hooked up an external monitor to the Powerbook's external DVI output.
Is there any way I can set the external monitor to be the default (ie primary) one? I'd like to have the main menu bar, the dock, and all the desktop icons display on it, and have new applications open on that display.
Thanks,
Doug.

In the "Arrangements" pane of "Displays" System Preferences, drag the menu bar from the picture of the laptop display to the picture of the external display.

Setting External Loaded SWF dimension

hi guys...,
i'll be straight to point,well i'm now working on a project using action script 3 now what i'm trying to make is a Main SWF that load whatever other swf into it the tricky thing is that i used 1 xml document read the external swf source and it's setting(such as it's x,y position and it's width and height) and i'm having problem setting the loaded swf width and height btw it's an desktop application and not a website application.,
here is my code:
//variable list
var swfList:XMLList; //hold all the zone list from the xml
var totalZone:uint; //total of zone there is in the xml
var myURLLoader:URLLoader = new URLLoader();
var swf:Movie Clip;//hold the loaded swf
var swfLoader:Loader = new Loader();//loader instance used to load the external swf
var myCounter:uint = 0;
//load the xml file
myURLLoader.load(new URLRequest('myXMLFile.xml'));
myURLLoader.addEventListener(Event.COMPLETE, processXML, false, 0, true);
function processXML(e:Event):void
 removeEventListener(Event.COMPLETE, processXML);
 XML.ignoreWhitespace= true;
 var myXML:XML = new XML(e.target.data);
 swfList = myXML.SWF;
 totalSWF = myXML.SWF.length();
 loadSWF();
function loadSWF():void
 swfLoader.contentLoaderInfo.addEventListener(Event.INIT, swfSetting);
 swfLoader.load(new URLRequest(swfList[myCounter].@source));
function swfSetting(e:Event):void
 //making new instance of sprite to hold the new loaded swf
 swf = new MovieClip();
 //casting the loader content into a movieclip
 swf = e.target.content;
 addChild(swf);
 swfLoader.unload();
 swf.x = swfList[myCounter].@left;
 swf.y = swfList[myCounter].@top;
 swf.width= swfList[myCounter].@width;
 swf.height= swfList[myCounter].@height;
 addChild(swf);
 if(myCounter < totalSWF)
 myCounter++;
 trace('myCounter: ' + myCounter );
 loadSWF();
and here is what the result ( it make the width and height of the loaded swf to 0):
swfLoader.contentLoaderInfo.width : 320
swfLoader.contentLoaderInfo.height : 240
module: MyVideo/flvplayer.swf
x:0
x container:0
y:0
y container:0
xml width:550
width container:0
xml height:400
height container:0
myCounter: 1
swfLoader.contentLoaderInfo.width : 550
swfLoader.contentLoaderInfo.height : 400
module: AnalogueClock.swf
x:50
x container:50
y:0
y container:0
xml width:250
width container:250
xml height:200
height container:200
myCounter: 2
swfLoader.contentLoaderInfo.width : 800
swfLoader.contentLoaderInfo.height : 30
module: MyNewsticker/newsticker.swf
x:0
x container:0
y:0
y container:0
xml width:300
width container:0
xml height:50
height container:0
most of my loaded swf beside the analouge clock is full action script code and in case of the analouge clock it is a swf that has a movie clip on it's stage (the other are fully created from action script 3.0)
please do help me..,
cause i'm already really desperate and going crazy by this problem..,

sorry i copied the code from the other swf i used to do try and error test..,
basically the container is the same as swf varibale
here the code so you would'nt get confused:
//variable list
var swfList:XMLList; //hold all the zone list from the xml
var totalZone:uint; //total of zone there is in the xml
var myURLLoader:URLLoader = new URLLoader();
var swf:Movie Clip;//hold the loaded swf
var swfLoader:Loader = new Loader();//loader instance used to load the external swf
var myCounter:uint = 0;
//load the xml file
myURLLoader.load(new URLRequest('myXMLFile.xml'));
myURLLoader.addEventListener(Event.COMPLETE, processXML, false, 0, true);
function processXML(e:Event):void
 removeEventListener(Event.COMPLETE, processXML);
 XML.ignoreWhitespace= true;
 var myXML:XML = new XML(e.target.data);
 swfList = myXML.SWF;
 totalSWF = myXML.SWF.length();
 loadSWF();
function loadSWF():void
 swfLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, swfSetting);
 swfLoader.load(new URLRequest(swfList[myCounter].@source));
function swfSetting(e:Event):void
 //making new instance of sprite to hold the new loaded swf
 swf = new MovieClip();
 //casting the loader content into a movieclip
 swf = e.target.content;
 addChild(swf);
 swfLoader.unload();
 swf.x = swfList[myCounter].@left;
 swf.y = swfList[myCounter].@top;
 swf.width= swfList[myCounter].@width;
 swf.height= swfList[myCounter].@height;
 addChild(swf);
 if(myCounter < totalSWF)
 myCounter++;
 trace('myCounter: ' + myCounter );
 loadSWF();
well in my code i did cast the loader into a movie clip and then set it's width and heigt,right???
wouldn't it just give me the same result??
if it's not can u describe what u mean in more detail??
some example about accessing the loader content would be really appreciated

Setting External Destination

Similar Messages

Maybe you are looking for