Setting Link Behaviors
I want to create a link to open a new window that has a
defined width. I've created a hyperlink on in the document and
selected _blank so it opens up in a new page. However, it opens in
a fully maximized page, whereas I want it to have a smaller defined
size so it does not cover the original page.
My link code is: <div id="Footer">© 2009
Company Name | <a href="legal.html"
target="_blank">Legal and Copyright</a></div>
I tried to define the size of the new page by having my
cursor on the link and setting the Behaviors - Open Browser Window
paramaters. I define the URL, the size, etc. as seen in the code
below:
<div id="Footer">© 2009 Company Name |
<a href="legal.html" target="_blank"
onclick="MM_openBrWindow('legal.html','','width=800')">Legal and
Copyright</a></div>
However, when I go and test it, it opens two new pages: a
full page and a minimized page set to the parameters I specified. I
also tried to just use the Behaviors panel vs. defining the
hyperlink but that just caused it to apply to the entire paragraph
and no hyperlink appearing in the page.
Please advise on how I can have a link that opens up a new
browser window that has defined width (that does not end up being
blocked by a pop up blocker).
Thanks.
You can use DW's OpenBrowser Window behavior instead of the
method you are
using.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ndc6060" <[email protected]> wrote in
message
news:gnegpd$arh$[email protected]..
>I want to create a link to open a new window that has a
defined width. I've
> created a hyperlink on in the document and selected
_blank so it opens up
> in a
> new page. However, it opens in a fully maximized page,
whereas I want it
> to
> have a smaller defined size so it does not cover the
original page.
>
> My link code is: <div id="Footer">© 2009
Company Name | <a
> href="legal.html" target="_blank">Legal and
Copyright</a></div>
>
> I tried to define the size of the new page by having my
cursor on the link
> and
> setting the Behaviors - Open Browser Window paramaters.
I define the URL,
> the
> size, etc. as seen in the code below:
>
> <div id="Footer">© 2009 Company Name
| <a href="legal.html"
> target="_blank"
>
onclick="MM_openBrWindow('legal.html','','width=800')">Legal
> and Copyright</a></div>
>
> However, when I go and test it, it opens two new pages:
a full page and a
> minimized page set to the parameters I specified. I also
tried to just use
> the
> Behaviors panel vs. defining the hyperlink but that just
caused it to
> apply to
> the entire paragraph and no hyperlink appearing in the
page.
>
> Please advise on how I can have a link that opens up a
new browser window
> that
> has defined width (that does not end up being blocked by
a pop up
> blocker).
>
> Thanks.
>
Similar Messages
-
Default link behavior is rather annoying
Safari seems to be the only browser that doesn't open links in a new tab and doesn't provide an option to set the behavior. I've been told its an option on the mac version but the only option is to control when you click links on the windows version. Why the **** is there no option to send links to a new tab? It gets rather annoying when using something like google reader in which you open a lot of links.
Why the ** is there no option to send links to a new tab? It gets rather annoying when using something like google reader in which you open a lot of links
Only the folks at Apple know. Send your feedback to them via the Help menu > Report Bugs to Apple... option in Safari. -
I've repeatedly defined a bevavior to two link colors together (a gradient colorize from one group links to the gradient colorize of another group.) I'll set it, it works just fine. When I close the project and open it up again, the "Apply To" is always reset and blank, but the Source Parameter will be intact.
Is there a known bug for this?
This in in Motion 5, which isn't available as a product option when submitting this discussion.The behavior is being applied to the RGB colors of a Gradient Colorize filter, not the gradient itself. Correct, the gradient is made of multiple values (RGB colors, locations, opacity) so applying a behavior to the entire gradient doesn't even make sense, and rightly so is impossible to do.
So if you apply the Gradient Colorize filter to anything, select the first (or second) color in the gradient, then to the right of the color control (and dropper icon) you'll see the ability to apply a behavior. This color can be linked to any other RGB value in any other layer or group via a Link behavior.
However, in my case, when I do it.. it never saves.
I've run tests from scratch where it WILL save. There's something unique to this project that Motion doesn't like.. and for the life of me, I can't figure it out, other than to just call it a bug.
Here's the test file that I set up that does work:
http://www.mediafire.com/?qpxhdmjdlljns85
There's a source group and two linked groups that follow the source group. Changing the colors of the source group changes the colors of the other two groups. This one, for some reason, saves.
So, what the heck does that do for me? Nothing.. in fact it's worse. There's some sort of conflict going on that I need to find that keeps mine from saving properly. -
Why are link behaviors working in my render but not my export?
When I export my video, the link behaviors don't behave like they do when I preview the video in the player window. It's like the export feature doesn't even know they're there. What's going on?
Hi Ben, thanks for helping.
I set all of the Render settings as you said, both on the Preview Canvas as well on the Export settings.
My export is still different than my preview. Here are the problems (all link behaviors):
"Link Slit Scan"
Source Parameter: Filters.Insect Eye.Refraction
Apply To: Filters.Slit Scan.Glow
Notes: In the preview, the slit scan is glowing bright white. In the export, it's completely dark.
"Link Halftone"
Source Parameter: Filters.Insect Eye.Refraction
Apply To: Filters.Halftone.Mix
Notes: In the preview, the halftone triggers along with the refraction. In the export, the halftone doesn't exist.
Extra Note: This is the same behavior that keeps changing the target to "Filters.Bad TV.Mix" when I close and reopen the project.
"Link Bad TV"
Source Parameter: Filters.Insect Eye.Refraction
Apply To: Filters.Bad TV.Waviness
Notes: In the preview, the waviness triggers smoothly along with the refraction (when the Bad TV mix is up). In the export, the waviness is jittering out of control.
By the way, Filters.Insect Eye.Refraction is controlled by an audio behavior, but the Refraction itself is working just fine.
I'll check out Ripple Training too. Thanks! -
Let's say you have a square and its oscillating back and forth on the X axis. Then you create a circle and you use the link behavior to link the X parameter of the circle to the x parameter of the square, so now you have both shapes oscillating together back and forth on the x axis. Can anyone figure out a way that I could make that circle lag behind the square. So, the circle would be moving the same speed and distance during its oscillation, but it would just be a little behind the movement of the square.
Any ideas? Thanks.Ok. Thanks for the mental exercise. It took me about 30 minutes to figure it out.
The key is not to link the two rotations together, but to link behaviors. Here's how to do it.
Apply the oscillate behavior to the X rotation of the rectangle. Set up as you like.
Duplicate the behavior and apply it to the Circle.
Add the Link behavior to the circle. Set the source object as the rectangle. Change the source parameter to the rectangle behavior's amplitude. Change the target parameter to the circle behavior's amplitude.
Adjust the phase on the circle's oscillate behavior. This will change the timing of the oscillation but the link will ensure that any changes to the amplitude of the rectangle will be reflected in the circle.
Animate the Custom Mix with keyframes from 0 to 1. This will allow you to control a "start up" if you will of the circle not moving, but rather reacting to the rectangle.
You can also link the speed of the rectangle's oscillation if you like as well, but that requires another link behavior. It all depends on how much control you need.
Andy -
It doesn't seem you can write in the parameters fields even though they are shown. Dose anyone know how to invert a link behavior?
(ex. one layer blinks on and off, linked layer blinks off and on)
TOnyTOnyThank You,
I also needed to set the Apply Mode to Add to Source, then this worked. It's one of those things where Apple has abstracted the function so much that it isn't discernable. I slided the slider to minus one but that was as far as it would drag. I assumed that is were I would have made the invertion but not being able to get there I didn't follow up on it. I knew that you can go outside the silder range but usally they go equally positive and negative.
I would like to see the whole expression (and be able to edit it).
TOnyTOny -
Set link for main image in gallery
Hi, how do you set link to the main image in the photo
gallery? I was able to add photo caption using the
spry:detailregion but cannot do use the same method for the main
image because Spry won't allow nested div.
I saw a thread that talked about changing the SetMainImage
function but I've tried that it doens't seem to work. Can you show
me how to edit the code to do this? Thank you.ok, after a day of trial and errors, I found a little fix for
this. It is not pretty but it does the job. First, change the
mainImageOutline div to a link. Second, add in two lines of codes
into the function ShowCurrentImage()
html file
<a href="#" id="mainImageOutline" style="width: 0px;
height: 0px;" ><img border="0" id="mainImage" height="250"
width="250" src="images/spacer.gif" /></a>
gallery.js
function ShowCurrentImage()
var curRow = dsPhotos.getCurrentRow();
// added by Tri
var tri_imgHolder =
document.getElementById("mainImageOutline");
tri_imgHolder.href = curRow["@newsLink"]; // this pull the
link from the XML file
// added by Tri
SetMainImage("2006_home_news/" +
dsGalleries.getCurrentRow()["@base"] + "images/" + curRow["@path"],
curRow["@width"], curRow["@height"], "tn" + curRow["ds_RowID"]);
link in the xml file
<photo
path = "Domlg.jpg"
width = "440"
height = "250"
thumbpath = "domthumb.jpg"
thumbwidth = "90"
thumbheight = "70"
newsLink="
http://www.tringuyen.net"> -
Set links for a PDF in Illustrator
I am setting up a multipage newsletter in Illustrator CS5 on a Mac. After saving as a PDF I have been using Acrobat Pro to go in and set links to go to the next page, home, websites, etc. It is getting cumbersome to have to redo all the links every time I have to make changes and generate a new PDF. It seems like I should be able to set these in Illustrator, but I can't seem to find anything that works. Has anyone tried anything like this? Thanks.
You are simply using the wrong tool. You really should consider InDesign, if PDF interactivity is required. You are not considering that artboards are just arbitrary tiles of a larger work canvas, not pages, so there is nothing persistent to establish a page logic on. The conversion to pages for PDF is jsut as arbitrary and only happens thne and there...
Mylenium -
Incoming email setting link missing in CA
My incoming email setting link is missing in CA. I read that you should run IE as an administrator By right-clicking the icon. But for me there is not such a choice, only "as different user".
Verify that the your account that is performing this procedure is a member of the Administrators group on the server that is running the SharePoint Central Administration website. Or use Administrator account to log in.
In Central Administration, click System Settings.
On the System Settings page, in the E-Mail and Text Messages (SMS) section, click Configure incoming e-mail settings.
If you want to enable sites on this server to receive email, on the Configure Incoming E-Mail Settings page, in the Enable Incoming E-Mail section, click Yes.
More: http://technet.microsoft.com/en-us/library/cc262947%28v=office.15%29.aspx
Bistesh -
Possible feature: Automatic data set linking...
A useful feature to add to Spry: Data set linking within the
definition of a dataset.
Although this can be achieved using filtering or dataset
regeneration programming, it would simplify the coding process
tremendously if done at the dataset definition level.
For example:
var dsCategories = new
Spry.Data.XMLDataSet("cetrgories.xml", "category");
var dsItems = new Spry.Data.XMLDataSet("items.xml",
"category/item", { link: "category = dsCategories.category"});
Here, the 'link' specification would cause the dsItems to be
automatically filtered on the field {category} matching the current
dsCategories row field {category} value when the
dsCategories.CurrentRow changes.Hi B_r_u_n_o,
You can already do this today with XPath filtering as Don
mentioned:
var dsCategories = new Spry.Data.XMLDataSet("cetrgories.xml",
"category");
var dsItems = new Spry.Data.XMLDataSet("items.xml",
"category/item[category = '{dsCategories::category}']");
--== Kin ==-- -
I don't gedit... I've applied 2 Set Speed Behaviours of 50% to a clip: the 1st one to the first 18 frames and the 2nd one to the last 15 frames. The clip's original duration of 00:00:05:21 is unchanged after applying the set speed behaviours. I was expecting that the duration would increase by 33 frames (18 + 15). I have not used ease in or ease out (they are set to 0). I have not blended the frames or used Optical Flow. When I scrub through the clip frame by frame, I can see that Set Speed has duplicated each frame, which is what I expected. But if it's doubled the frames and not increased the overall duration, surely something must have been dropped? The clip ends at the same place.
The clip's original frame rate is 25fps and the format is HD Blackmagic 10 Bit, 1920 x 1080, progressive
Can anyone explain why there is no frame rate change please. I've spent a couple of days searching to try to find a discussion on the Set Speed behavior in Motion 3 but haven't found anything that goes into the frame rate implications.Good question as I originally imported the clip as project to ensure I had the right settings. This did create a project duration of 00:00:05:21, so I changed it in the Project Properties dialogue to 00:00:10:00. I then applied the 2 Set Speed behaviours and RAM previewed all. After frame 00:00:05:21 the remaining frames are black - ie the clip still ends at 00:00:05:21 even though the project's duration is 00:00:10:00.
-
How do we set "Link That Displays Item In Full Browser Window" property?
How can we set "Link That Displays Item In Full Browser Window" property? I could not find it. Thanks...
I assume you're using Portal 3.0 (it always helps to mention which portal version you're using).
I suggest you search this forum for "new window". You'll find several threads discussing how to implement this feature in Portal 3.0.
Regards,
Jerry
PortalPM -
How can I get rid of this boot-time message:
"ATA2: Unable to set Link PM Policy"
Sorry, that may not be verbatim. It goes by fast, and I can't find the message in any logs.
Thanks.buttons wrote:
I get this, too.
AHCI driver.
Is there some option that I can use to set the Link PM Policy or, failing that, at least to avoid getting the message?
Thanks. -
Trouble setting link prop. for a slice
Hi there, new to fireworks (sortof) have been playing with it on and off and I am now trying to be dedicated to it wholely.
I am able to set links for some of my slices and can not on otheres. On the same page too. It just wont stick, when I click out of it, it loses the link property.
Cant figure it out. Help plz
JoeyMake sure the slice is a foreground image slice, and that you have the slice selected.
-
Hi to all,
Im using SAP B1 2005B SP:00 PL01. I created a UDT. Now iv created a UDF in a master form from where i want to link the values of the UDT to this field.. Now wen i go to use the SET LINKED TABLE option the length automatically gets set to 8.. Now wen i try to add the field i get the erro saying "Alphanumeric Column size cannot be decreased." Help would be appreciated
Regards
ArisHi Aristotle,
To resolve this, please follow the instructions below:
1. Create the UDF with Type - Alphanumeric and Structure - Text
2. Now check the box Set Linked Table - note that the structure is regular again.
3. Now add the table and the error is displayed.
4. Now uncheck the box 'Set Linked Table' and set the Structure to Text again and recheck the box 'Set Linked Table'.
5. Now add the UDF and see that it is sucessful.
Regards,
Adrian
Maybe you are looking for
-
Unable to mark ITXEX field for first subtype in IT40
Hi, My problem is as follows: 1. I am using a bespoke ABAP program to create a subtype (any subtype) for IT40 (objects on loan). 2. The program is able to create the infotype - subtype records correctly. This is was verified using PA30. 3. However, i
-
When i click on a song to play or drag it to a playlist an exclaimation mark appears next to it. a message says , could not be used because the original file could not be found. does anyone know how to fix this problem?
-
Luns on outside half of disk drives for higher performance
Hi, I undrestand that luns created on outside half od disks drivers can produce better performance. in my case we have NAS,connection type iscsi, 5x 1TB disks. and RAID5. the question is if I create x 1TB or x200GB luns, in term of performance of lun
-
Are we allowed to advertise feature requests we have placed in order to gain "weight" for our requests?
-
I am trying to load data into ODS, I have checked all the procedure, its ok, but while loading, the records are coming up to PSA, and the request is with yellow signal in the monitor window, and the data is not seen in the ODS? Why it is like this? I