Setting ServletReloadCheckSecs programatically

Hello,
          In config.xml, under Domain->Application->WebAppComponent, there is an
          attribute called ServletReloadCheckSecs that is used by weblogic to
          decide whether to check a war file for update and how frequent should
          the check be. The default is 1 sec.
          The only way to change this number, short of editing config.xml after
          deployment, is to use the console. Does anyone know how to set this
          programatically? Like as an argument to weblogic.Deployer or as an
          attribute in web.xml?
          Thanks,
          Chishun Kwong

          "Chishun Kwong" <[email protected]> wrote in message
          news:[email protected]..
          > Hello,
          >
          > In config.xml, under Domain->Application->WebAppComponent, there is an
          > attribute called ServletReloadCheckSecs that is used by weblogic to
          > decide whether to check a war file for update and how frequent should
          > the check be. The default is 1 sec.
          >
          > The only way to change this number, short of editing config.xml after
          > deployment, is to use the console. Does anyone know how to set this
          > programatically? Like as an argument to weblogic.Deployer or as an
          > attribute in web.xml?
          >
          > Thanks,
          > Chishun Kwong
          In web.xml adding the following should work for you
          <context-param>
          <param-name>weblogic.servlet.reloadCheckSecs</param-name>
          <param-value>-1</param-value>
          </context-param>
          If you are using weblogic 7.x or 8.1 you can alternatively set this
          parameter in weblogic.xml
          http://e-docs.bea.com/wls/docs81/webapp/weblogic_xml.html#1038823
          <container-descriptor>
          <servlet-reload-check-secs>-1 </servlet-reload-check-secs>
          </container-descriptor>
          hope that helps
          Nagesh

Similar Messages

How to set JAVA_HOME programatically

Hi Friends,
Is there anyway to set JAVA_HOME environment property using a batch script.Actually,I am trying to check if the user system has java installed or not. If not,I make him run the JRE installer but the problem is when I try to start Tomcat, it expects JAVA_HOME to be set. So, I want to set JAVA_HOME programatically, is there anyway to do so???
This is the script i am using to check if java is already installed or not:
@echo off
::This batch file only tested under Windows 2000
::It will detect the short path of the current version
::of the Java runtime executable
::First test to see if we are on NT or similar OS by seeing
::if the ampersand is interpreted as a command separator
reg1.txt echo 1234&remtype reg1.txt | find "rem"
if not errorlevel 1 goto WIN9X
::Find the current (most recent) Java version
start /w regedit /e reg1.txt "HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment"
type reg1.txt | find "CurrentVersion" > reg2.txt
if errorlevel 1 goto ERROR
for /f "tokens=2 delims==" %%x in (reg2.txt) do set JavaTemp=%%~x
if errorlevel 1 goto ERROR
echo Java Version = %JavaTemp%
del reg1.txt
del reg2.txt
::Get the home directory of the most recent Java
start /w regedit /e reg1.txt "HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment\%JavaTemp%"
type reg1.txt | find "JavaHome" > reg2.txt
if errorlevel 1 goto ERROR
for /f "tokens=2 delims==" %%x in (reg2.txt) do set JavaTemp=%%~x
if errorlevel 1 goto ERROR
echo Java home path (per registry) = %JavaTemp%
del reg1.txt
del reg2.txt
::Convert double backslashes to single backslashes
set JavaHome=
:WHILE
if "%JavaTemp%"=="" goto WEND
if not "%JavaHome%"=="" set JavaHome=%JavaHome%\
for /f "delims=\" %%x in ("%JavaTemp%") do set JavaHome=%JavaHome%%%x
for /f "tokens=1,* delims=\" %%x in ("%JavaTemp%") do set JavaTemp=%%y
goto WHILE
:WEND
set JavaTemp=
echo Java home path (long, with spaces) = %JavaHome%
::Convert long path (with spaces) into a short path
for %%x in ("%JavaHome%") do set JavaHome=%%~dpsx
echo Java home path (short path, no spaces) = %JavaHome%
::Test the java path to see if there really is a java.exe
if not exist %JavaHome%\bin\java.exe goto ERROR
::Make changes to the PATH
echo Insert code here that needs to know the short path to Java.
set path=%JavaHome%\bin;%path%
goto DONE
:WIN9X
echo Insert code here for Windows 9x
goto DONE
:ERROR
echo Insert code here for conditions where Java.exe can't be found
goto DONE
:DONEThanks

You are asking questions about Windows batch scripting in a Java forum?
When you get right down to it, the question is "How do I set an environment variable in a batch script", isn't it? Free your mind from useless distractions: the batch script and the operating system don't care at all what you're going to use that environment variable for.
Oh yeah, I almost forgot: you use the SET command to set an environment variable.

Setting SPEL Programatically

Hi all,
Is it possible to set SPEL programatically. I want disable and enable a delete image column in a table in a standard page. I have to achieve this through customization. Any ideas how to do it?
Regards,
Pradeep

Hi Pradeep ,
Programmatic SPELL is not possible , you achieve hide / show the image using switcher in OAF ,
Please refer this
Can we add SPELL programatically?
Keerthi

How can I set layoutset programatically in a folder ?

Hi Gurus,
I have a requirement in which I need to assign, programatically, a layout set for some folder. Does anybody give me an idea about it ?
Thanks a lot.
Patricio.

How To Use Automator To Batch Rename Images on Mac

Setting CSS Programatically

Hi all,
Howdy all,
Is it possible to set the css of row in a dataTable programmatically? I have a dataTable bound to a UIData component and I cycle through the rows of the table and calculate some values. If the value is greater than a certain threshold, I need to highlight the entire row, say by coloring it red. Is is possible to manipulate the style for that single row?
Thanks,
-Elam

You should be able to bind datatable CSS row property to a backing bean function that returns the list of CSS classes. I think the list should be comma separated, one for each row.

CRVS2010 Beta - help setting embedded field programatically

I have a report where the details section spits out names that come from two fields: FIRSTNAME and LASTNAME.
They are displayed in a textobject with embedded fields []. I need to highlight only the last name if it equals "Smith." I have accomplished this by right-clicking the and "Format Embedded Field" and next to the underline checkbox write a formula that says:
IF {REPORTS.LASTNAME} = "SMITH" THEN
True
My question is, how can I set this formula programatically? I need "SMITH" to be a variable set by the vb.net program. I cannot figure out how to reference an embedded field within a textobject.
thanks.
Updated the subject accordingly
Edited by: Don Williams on Sep 24, 2010 9:54 PM

Thanks for taking my question. I am using VS 2010, and the CR and assemblies that came standard with it, 14.0.2.
Meantime I came up with a workaround:
I created a new input parameter called LASTNAME_IN and I can set that programatically. Then I modified the formula to read:
IF {REPORTS.LASTNAME} = {?LASTNAME_IN} THEN
True
and this functions as I wish. However this is incredibly manual (I have to go back and add this parameter to each and every report) and it would be much easier to just be able to reference in the program.
thanks again.
Edited by: Chaseshaw on Sep 25, 2010 12:13 AM

Problem with setting custom attribute and it being searchable

I'm having an issue with setting a custom attribute and having it be searchable using Portal 10.1.4. The situation that we have is that we initially added a bunch of files to Oracle Portal using webdrive. Later on, we decided that we needed another custom attribute called "Pinned Item" that will be used for searching (boolean value) and gave it a default value of false. The attribute was then added to the "File" item type in the "Shared Objects" group.
It appears that since this attribute wasn't initially available on the file object, we couldn't search on it so we decided to set it programatically. First, I tried using wwsbr.set_attribute but it errored out seemingly because the value wasn't set in the first place. If I set a value first by using the web front end, I could then use the set_attribute procedure.
So, I moved on to using wwsbr_api.modify_item and it appears to set it (although everything is being set to false until I changed it to "text" instead of "boolean" which is OK because that's what I wanted anyway... see metalink bug 390618.1). I'm using the method outlined in metalink doc 413079.1. When I do set it to a "1", and edit the item the check box is checked indicating that it is set correctly. And if I just click "OK" to save the attributes after I open it everything works like it should.
However, the advanced search (and custom search portlet) and the search APIs are not picking it up. I'm not sure if I'm hitting Metalink bug ID 5592472 or not as that's using the "set_attribute" procedure instead of the modify_item procedure. And their "workaround" of setting the attribute in the UI isn't really feasible for a couple thousand files.
So far I've tried the following things to get it working:
1. I am calling wwpro_api_invalidation.execute_cache_invalidation
2. I have executed wwv_context.sync
3. I cleared the page group cache
4. I invalidated all of the web cache
Does anyone else have any other suggestions?

I'm having an issue with setting a custom attribute and having it be searchable using Portal 10.1.4. The situation that we have is that we initially added a bunch of files to Oracle Portal using webdrive. Later on, we decided that we needed another custom attribute called "Pinned Item" that will be used for searching (boolean value) and gave it a default value of false. The attribute was then added to the "File" item type in the "Shared Objects" group.
It appears that since this attribute wasn't initially available on the file object, we couldn't search on it so we decided to set it programatically. First, I tried using wwsbr.set_attribute but it errored out seemingly because the value wasn't set in the first place. If I set a value first by using the web front end, I could then use the set_attribute procedure.
So, I moved on to using wwsbr_api.modify_item and it appears to set it (although everything is being set to false until I changed it to "text" instead of "boolean" which is OK because that's what I wanted anyway... see metalink bug 390618.1). I'm using the method outlined in metalink doc 413079.1. When I do set it to a "1", and edit the item the check box is checked indicating that it is set correctly. And if I just click "OK" to save the attributes after I open it everything works like it should.
However, the advanced search (and custom search portlet) and the search APIs are not picking it up. I'm not sure if I'm hitting Metalink bug ID 5592472 or not as that's using the "set_attribute" procedure instead of the modify_item procedure. And their "workaround" of setting the attribute in the UI isn't really feasible for a couple thousand files.
So far I've tried the following things to get it working:
1. I am calling wwpro_api_invalidation.execute_cache_invalidation
2. I have executed wwv_context.sync
3. I cleared the page group cache
4. I invalidated all of the web cache
Does anyone else have any other suggestions?

SharePoint 2013 List & linked Document Set Project Help Needed

I have struggling to find the best solution for a recent project. I'm sure someone will have a better suggestion than what I have come up with.
Project Requests
Project Tracking and Documents
Status and other data
Project Documents
Offsite Syncing for active projects (SkyDrive Pro)
Attempted Scenario
1 List for Project Tracking
1 Document Library for Project Documents (Document Set content type)
I created a workflow to automatically create a new Document Set when an item was added to the list, then create a link to the Document set in a column called Documents. The goal with the document sets is to have them sent to another library (archive) when
the project is marked complete. The reason is so that the user synching offline won't have so many document sets to sync or to browse through (there would easily be a few hundred within a couple of months)
Is there a way to programmatically move the document set to an archive library when the list item status is set to complete? And if the status were to change back to active, to move back to the active library.
Or maybe I am going about this the wrong way entirely? All suggestions are greatly appreciated!

Hi,
With Event Receiver, we can capture the ItemUpdated event of item of a list when the value of an item is updated, then perform the Document Set moving accordingly.
Here is a step by step sample on creating a simple Item added event receiver for Custom List in SharePoint 2010:
http://msdn.microsoft.com/en-us/library/ff398052.aspx
More information on
Event Receiver for your reference:
http://msdn.microsoft.com/en-us/library/gg749858(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/ff408183(v=office.14).aspx
Here is a thread with code demo about
moving Document Set programmatically:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/1e8b1110-a719-4825-a300-cc1946f4d96a/document-sets-move-programatically
Feel free to reply if there are still any questions.
Best regards
Patrick Liang
TechNet Community Support

Getting error 025036 while setting bind variable value

Hi,
I have created a view object (ViewObj) having bind variable (Bind_Val).
I am writing custom java method in AppModuleImpl.java, so that I can use that in serviceInterface.
my method is:
public void Met(String a){
ViewObjImpl vo=new ViewObjImpl();
vo.setBind_Val(a);
I tried the below method also:
public void Met(String a){
ViewObjectImpl vo=new ViewObjectImpl();
vo.setNamedWhereClauseParam("Bind_Val",a)
But when I am running the AppModuleServiceImpl.java and select the Met method and pass the value for a. It is giving me error 02036.
How to set the bind variable value in AppModuleImpl.java??
Thanks,
Rohit

Hi Frank,
Thanks for reply. It was helpful.
Please go through the below mentioned two queries.
My sql query is:
SELECT Message.MESSAGE_ID,
MessageProp.VALUE,
MessageProp.MSG_PROP_ID
FROM MESSAGE Message, MESSAGE_PROP MessageProp
WHERE (MessageProp.Key='From' OR MessageProp.Key='To')AND Message.MESSAGE_ID = MessageProp.MESSAGE_ID And MessageProp.Value='B'
and I have created one view criteria where I am giving the condition as MessageId=:Bind_MessageId.
And then I am executing my findViewCriteria method from AppModuleServiceImpl where I am passing the value for Bind_MessageId and I am getting the output as I want.
Now I am modifying my query as:
SELECT Message.MESSAGE_ID,
MessageProp.VALUE,
MessageProp.MSG_PROP_ID
FROM MESSAGE Message, MESSAGE_PROP MessageProp
WHERE (MessageProp.Key='From' OR MessageProp.Key='To')AND Message.MESSAGE_ID = MessageProp.MESSAGE_ID And MessageProp.Value=:Bind_Value
and setting the value for :Bind_Value programatically as:
public void test(String s){
ViewObjectImpl view = this.getViewObj1();
VariableValueManager vm = view.ensureVariableManager();
vm.setVariableValue("Bind_Value",s);
**Note- I have written this custom method in AppModuleImpl.java class
Then firstly I am executing test method from AppModuleServiceImpl to set the value for :Bind_Value. After that I am executing findViewCriteria method but then I am not getting any record.
**Note-I am not getting any error.
I want to set Bind_Value programatically and then I want to execute my FindViewCriteria from serviceInterface.
Thanks,
Rohit

Setting isolation level with JDriver for Oracle/XA

edocs (http://e-docs.bea.com/wls/docs70/oracle/trxjdbcx.html#1080746) states that,
if using jDriver for Oracle/XA you can not set the transaction isolation level
for a transaction and that 'Transactions use the transaction isolation level set
on the connection or the default transaction isolation level for the database'.
Does this mean that you shouldn't try to set it programatically (fair enough)
or that you can't set it in the weblogic deployment descriptor either? Also anybody
got any idea what the default is likely to be if you are using an Oracle 9iR2
database? Is this determined by some database setting?

IJ wrote:
edocs (http://e-docs.bea.com/wls/docs70/oracle/trxjdbcx.html#1080746) states that,
if using jDriver for Oracle/XA you can not set the transaction isolation level
for a transaction and that 'Transactions use the transaction isolation level set
on the connection or the default transaction isolation level for the database'.
Does this mean that you shouldn't try to set it programatically (fair enough)
or that you can't set it in the weblogic deployment descriptor either? Also anybody
got any idea what the default is likely to be if you are using an Oracle 9iR2
database? Is this determined by some database setting?The system should honor the setting defined in the deployment descriptor,
however, for oracle it may not be helpful to change it. Oracle provides two
isolation levels. The default is always READ_COMMITTED. The other
setting is SERIALIZABLE, but this hurts performance, and is also problematic
in the way oracle implements it. For instance, even if you set SERIALIZABLE,
oracle will not lock read data. It will allow other transactions to read and/or
alter data trhat another ongoing SERIALIZABLE transaction has read. The
only way to really lock read data in oracle is to issue oracle-specific SQL in
your select: "SELECT ..... FOR UPDATE".
All in all, you should collect a strong case for why you can't proceed with
READ_COMMITTED first. Then you should research oracle's recommendations
(and their problem record) with SERIALIZABLE.
Joe Weinstein at BEA

How to set the value of an LOV in CO prgramatically and get the Pkey value?

Hi,
I need to set a value to a LOV, say ItemLOV in a page through CO and get the Primaykey that LOV will return. How can I achieve this?
Req:
1. Set the Item_Name, say 'DELL_1618' so that the page displays this in the LOV.
2. Fetch the PK value returned by LOV in the backend into a VO attribute say Item_ID, '100009881'.
Thanks,
Santosh.

Hi Santosh,
Sorry, I replied for General LOV Scenario, but want to set it programatically right,
You need to execute your LOV query in Controller for Item 'DELL_1618' using prepared statement, get the value for both dispaly value and Id and set it to LOV and FormVlaue Item in PR of controller.
Regards,
Reetesh Sharma

Setting XA isolation level.

Is there a configuration parameter that controls the default isolation level used by distributed transactions when you configure XA support on Oracle 8i? I know Oracle's default isolation level is READ COMMITTED, but I would like to have SERIALIZABLE as the isolation level for transactions that are initiated from some MS COM+ components accessing the database.
Thanks,
Sam

Ian,
The default for Oracle (any version) is ReadCommitted. The only other
isolation level Oracle supports is Serializable but it's implemented in
such a way that you will be allowed to continue until commit time and
only then you might get an exception stating the the access for that
transaction could not be serialized.
I don't know for the jDriver but if you use the Oracle Thin XA driver
even if you set the isolation level in your descriptor you will get an
exception from Weblogic. It is a Weblogic bug and you can contact
[email protected] to get a patch.
Regards,
Dejan
IJ wrote:
edocs (http://e-docs.bea.com/wls/docs70/oracle/trxjdbcx.html#1080746) states that,
if using jDriver for Oracle/XA you can not set the transaction isolation level
for a
transaction and that 'Transactions use the transaction isolation level set on
the connection
or the default transaction isolation level for the database'. Does this mean that
you shouldn't try to set it programatically (fair enough) or that you can't set
it in the weblogic deployment descriptor either? Also anybody got any idea what
the default is likely to be if you are using
an Oracle 9iR2 database?

Setting transaction isolation level for jDriver Oracle/XA

edocs (http://e-docs.bea.com/wls/docs70/oracle/trxjdbcx.html#1080746) states that,
if using jDriver for Oracle/XA you can not set the transaction isolation level
for a
transaction and that 'Transactions use the transaction isolation level set on
the connection
or the default transaction isolation level for the database'. Does this mean that
you shouldn't try to set it programatically (fair enough) or that you can't set
it in the weblogic deployment descriptor either? Also anybody got any idea what
the default is likely to be if you are using
an Oracle 9iR2 database?

Ian,
The default for Oracle (any version) is ReadCommitted. The only other
isolation level Oracle supports is Serializable but it's implemented in
such a way that you will be allowed to continue until commit time and
only then you might get an exception stating the the access for that
transaction could not be serialized.
I don't know for the jDriver but if you use the Oracle Thin XA driver
even if you set the isolation level in your descriptor you will get an
exception from Weblogic. It is a Weblogic bug and you can contact
[email protected] to get a patch.
Regards,
Dejan
IJ wrote:
edocs (http://e-docs.bea.com/wls/docs70/oracle/trxjdbcx.html#1080746) states that,
if using jDriver for Oracle/XA you can not set the transaction isolation level
for a
transaction and that 'Transactions use the transaction isolation level set on
the connection
or the default transaction isolation level for the database'. Does this mean that
you shouldn't try to set it programatically (fair enough) or that you can't set
it in the weblogic deployment descriptor either? Also anybody got any idea what
the default is likely to be if you are using
an Oracle 9iR2 database?

Set 2d picture control image

I'm making some palette installers for ease of distribution for some libraries I have written. I'm following the example VIs (search the example finder for "palette API").
I'm having some frustration in setting the new palette icon; the icon constant is a 2d picture control but I can't find a way to drop my image into it, and I can't set it programatically as the 2d picture control VIs only allow me to draw shapes into it.
- Cheers, Ed
Solved!
Go to Solution.

In cases like this I often resort to using a transparent classic path as an overlay to catch dropped files. If you do not plan on interacting with the picture control, it is quite easy. Otherwise it is just a few more events to control visibility when the mouse enters the VI with the button pressed.
Just run the VI and drag PNG, JPG, or BMP files to the picture control.
Attachments:
DragToPictureControl.vi ‏16 KB

Problem setting page margins for printing

I made a program that prints inventory reports at work, but I wanted to push back the margins a bit so I can use a font size one larger. As it is, some of the information is at font size 10. I do not want to use the "Page Settup" dialog to bug the user to change it; I wanted to set it automatically.
I tried taking the PageFormat argument to Printable's print() method and setting the imageable area like so...
    public int print(Graphics graphics, PageFormat pageFormat, int pageIndex)
        Paper formatEdit = pageFormat.getPaper();
        formatEdit.setImageableArea( 36,36, pageFormat.getWidth()-36,pageFormat.getHeight()-36);
        pageFormat.setPaper(formatEdit);
        ...Is this at least the general approach I should be using, or should I be doing something totally different?
As always, thanks much in advance.
Edited by: Loduwijk on Sep 25, 2008 3:40 PM
Edited by: Loduwijk on Sep 25, 2008 3:50 PM

Set them automatically based on what criteria?
If you just want to set them programatically, then as the Help indicates, use the Printing:Margins property to set those values.
Attachments:
Example_VI_BD.png ‏2 KB

Setting ServletReloadCheckSecs programatically

Similar Messages

Maybe you are looking for