Setting Spool Width for Version 4.6B
Hi All,
Can anyone please help me in increasing the Spool width to 300 for the SAP version 4.6B.
Thanks & Regards
Ashish
Hi Ashish,
You may look at the OSS note 186603. It seems you have to create an entry in the table TSPOPTIONS as mentioned in the note.
Also pls refer the following notes
409339
213382
Cheers
Vinod
Similar Messages
-
How to set the width for a selectManyShuttle component
Hi,
I'm using selectManyShuttle component from Oracle ADF Core and some of the items in the showing list are long, therefore the width of selectManyShuttle expands the page. How to set the width property for selectManyShuttle component? After that does selectManyShuttle provide horizontal scrollbar as well?
Thanks in advance,
lapi
Message was edited by:
[email protected]
Message was edited by:
[email protected]Solution here:
Re: ADF Faces Scrollable Panel or Scroll Bar inside a component
Regards
Grant -
How do I set column width for a table?
I want to set the same width for all the columns in a particular table. Is there anyway of doing this without having to actually manually adjust each individual column?
ThanksSelect the column headers and drag across (A,B,C for example) then select between one of the columns (your pointer will change shape). Select and drag to the new width. All selected columns will change.
Regards, -
How to set custom widths for a particular report column?
how could I set a custom width for a particular report column? Is there a way to do it using css?
Thank you.Hi Leland,
I have tested this here: [http://apex.oracle.com/pls/otn/f?p=267:18]
All I have done is add the following into the report's Region Header:
<style type="text/css">
#apexir_EMPNO {width:200px}
#apexir_ENAME {width:200px}
#apexir_DEPTNO {width:200px}
.apexir_WORKSHEET_DATA TR TD {height:100px;}
</style>The headers have all be set to be left-aligned. Each column should be 200px wide (even though I'm setting the width on the headers, it will be applied to the entire column unless a cell's contents is wider, in which case the column is made wider). The final entry above adjusts the height of all TDs within the IR table.
Andy -
Set default width for text box in Adobe Acrobat X
Hello!
I am using the textbox tool to add comments to a document. (not the Typewriter, but the Textbox, since that has more flexibility for formatting the text).
I know how to set the default proprties for text size, color, background color, etc.
Cannot figure out however to to set the default width. Every time I try to add a new textbox, it defaults to about 1 or 2 inches wide, so the text wraps around and around, and then I have to resize the box when I am done.
Is there a way to change the default width?
Thanks!Hi, Amonra
I drew a box I like, and select, and then, Ctrl+C, and then Ctrl+V.
And move the pasted box where to need, and resize the length. At least I get same width boxes.
I don't know how to default it.
I hope it may help you. -
Setting dynamic widths for textfields in as3?
I have 3 textfields. they're in a sprite container. 1. date 2. pipe_mc movieclip 3. title field. I need to set it so that the textfield/mc/textfield;s x property changes dynamically when a shorter or longer date gets added into the field, via XML.
Here is the code:
addChild(dateline);
dateline.addChild(date_txt);
dateline.addChild(title_txt);
dateline.addChild(pipe_mc);
date_txt.x = 3;
var spacer:Number = 10;
if (date_txt.textWidth >= 90) {
pipe_mc.x = date_txt.x + date_txt.width + 18;
title_txt.x = pipe_mc.x + pipe_mc.width + spacer;
else if (date_txt.textWidth <= 90) {
pipe_mc.x = date_txt.x + date_txt.width - 18;
title_txt.x = pipe_mc.x + pipe_mc.width + spacer;
pipe_mc.visible = true;
Any help or suggestions are welcome
ThanksDo you have the textfield set up to be autoSized? Is there a reason for having three textfields separate rather than combining the text into one textfield with sufficient spacing between the entries?
-
Problem setting different width for images using HorizontalList tag
Hi,<br />I succeeded using HorizontalList in my AdvancedDataGrid,<br /><br /> <mx:groupedColumns><br />...<br />...<br /> </mx:groupedColumns> <br /> <mx:rendererProviders> <br /> <mx:AdvancedDataGridRendererProvider <br /> dataField="Actual" <br /> renderer="ChartRenderer" <br /> columnIndex="3" <br /> /> <br /> </mx:rendererProviders> <br /><br />My Chartrenderer:<br /><br /><mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" <br /> xmlns:local="*"><br /> <mx:Script><br /> <br /> import mx.collections.ArrayCollection;<br /> import mx.controls.Image;<br /> private var images:Array; <br /> private var catalog:ArrayCollection; <br /> private static var cat:Array = [<br /> "kpi_overtime_bar_10.png", "kpi_overtime_bar_20.png",<br /> "kpi_overtime_bar_30.png", "kpi_overtime_bar_40.png"<br /> ];<br /> <br /> <br /> private function initCatalog(items:Array):void<br /> {<br /> catalog = new ArrayCollection(items);<br /> myList.dataProvider = catalog;<br /> }<br /> <br /> <br /> </mx:Script><br /> <mx:VBox height="20" width="40%" xmlns:mx="http://www.adobe.com/2006/mxml"<br /> horizontalScrollPolicy="off" <br /> verticalScrollPolicy="off"><br /> <mx:HorizontalList width="100%" id="myList" <br /> horizontalScrollPolicy="off"<br /> verticalScrollPolicy="off"<br /> columnCount="4" <br /> creationComplete="initCatalog(cat)"><br /> <mx:itemRenderer><br /> <mx:Component><br /> <mx:Image width="50%" height="20"<br /> maintainAspectRatio="false"/> <br /> </mx:Component><br /> </mx:itemRenderer><br /> </mx:HorizontalList><br /> </mx:VBox><br /><br /></mx:Application><br /><br />This is a test I've done to see if I can palce a list of images in a cell,<br />and I can :)<br /><br />I have 2 problems:<br /><br />1. Here the size of each image is contant, I need a way to set each image in the list to be different,<br />Can I do it? <br />2. I need to load the images dynamically and not from a fixed Array,<br />Can I do it?<br /><br />It will be great to get help.....<br />Thanks<br />Jo
On Sunday 15 Feb 2009, Yossi Bar wrote:
> I think not all my descussion detailes were shown,
I think you should be asking on FlexCoders...
Tom Chiverton
Helping to collaboratively enable 24/7 plug-and-play portals
This email is sent for and on behalf of Halliwells LLP.
Halliwells LLP is a limited liability partnership registered in England and Wales under registered number OC307980 whose registered office address is at Halliwells LLP, 3 Hardman Square, Spinningfields, Manchester, M3 3EB. A list of members is available for inspection at the
registered office together with a list of those non members who are referred to as partners. We use the word partner to refer to a member of the LLP, or an employee or consultant with equivalent standing and qualifications. Regulated by the Solicitors Regulation Authority.
CONFIDENTIALITY
This email is intended only for the use of the addressee named above and may be confidential or legally privileged. If you are not the addressee you must not read it and must not use any information contained in nor copy it nor inform any person other than Halliwells LLP or the addressee of its existence or contents. If you have received this email in error please delete it and notify Halliwells LLP IT Department on 0870 365 2500.
For more information about Halliwells LLP visit
www.halliwells.com. -
Setting create date for versioned documents
Hi,
I'm trying to explicitly set the create date for a versioned document (as in, the versions for the document), using the Content DB java API.
What I'm trying to do is basically this (pseudo-code):
- Create an unversioned document (the folders do not have auto-version turned on) with the create date explicitly set. This works fine.
- Make it versioned
- Check it out, upload a new version with the create date set, check it back in
It is at the last step where I seem to have problems -- the act of checking a file back in seems to reset the create date to be the date of checkin rather than the date I set.
Is there any way of accomplishing what I'm trying to do?
Thanks,
PhillHello,
why so complicated? You can do all in one ;)
Check this out:
How to upload file to Conetent database and remain the creating date
In the end its like this:
Item verTest = fileM.createDocument(
new NamedValue[] {
ClientUtils.newNamedValue(Attributes.CREATE_DATE, olddate)
gl
Matthias -
Setting tab width for Text editor
Simple ? I was unable to see this in the tool help. How do we set the tab width in the Text Editor for solaris.
Hi,
Please see the man page of xview.
The parameter: text.tabWidth in the .Xdefaults file controls the tab width size. -
How to set column width for Label in Form region?
In the form region, the label value is a lengthy text, and it does not wrap. How do I make it wrap to a fixed column width?
Under Home>Application Builder>Application>Page>Edit Page Item,
i have set "HTML Table Cell Attributes" to width="300", but it still does not wrap. and pushes the field to the right end of the page.
I am quite sure there are better ways of doing this.thanks Simakas for the reply.
I had set the label template to "Optional" and that was forcing a "nowrap". After unsetting the template, I used your suggestion and it works like a charm. Thanks. -
Set Width for a column, Merge cells in Excel
Hi all,
I am using jacob.dll to open and modify an Excel file. And I am stucking in below trouble:
Dispatch workbook = Dispatch.invoke(workbooks, "Open",
Dispatch.Method,
new Object[]"D:\\02042005.xls",
new Variant(false), new Variant(false)},
new int[1] ).toDispatch();
Dispatch sheet = Dispatch.get(workbook,"ActiveSheet").toDispatch();
System.out.print(sheet.get(sheet,"Name") + "\n");
Dispatch a1 = Dispatch.invoke(sheet, "Columns",
Dispatch.Get,new Object[] {"A:A"},
new int[1]).toDispatch();
Dispatch.put(a1,"Width","8");
Error message is that I can not set value Width for object RANGE! so strange... Is there any ways to set Width for a certain column?
Any help is appreciated.
Regards,
YukiNguyenHi all,
:) At last I can work done with Jacob, so great :) take me all yesterday to find more... just hope this post can help someone like me save one day to find how :)
//Get Range
Dispatch orange = Dispatch.invoke(osheet,"Range",Dispatch.Get,new Object[]{"A1:I1"},new int[1]).toDispatch();
//Get Column I & set Width
ocolumn = Dispatch.invoke(orange,"EntireColumn",Dispatch.Get,new Object[]{"I"},new int[1]).toDispatch();
Dispatch.put(ocolumn,"ColumnWidth","60");
//Merge cell
orange = Dispatch.invoke(osheet,"Range",Dispatch.Get,new Object[]{"C12:D12"},new int[1]).toDispatch();
orange.call(orange,"Merge");
Is it exciting, huh? :) I am trying to set HorizontalAlignment... beginner always stuck in somethings :)... but I have learnt so much
Regards,
YukiNguyen -
Setting width for a OAMessageStyledTextBean
is there any way to set the width for a messagestyletext item inside a table
at design time or at run time
thanksSet the length property.
But in case the length of the values are less(and there are more columns to display), OA framework would automatically decrease the width of this column to make space for other columns. -
Setting width for UITableViewCell in a grouped TableView like in Facebook?
Does anyone have any ideas on how Facebook sets the width for UITableViewCells?
If you look, they're not always the full width of the screen, but sometimes have an avatar image to the left or right.They're probably not changing the width of the cell, just moving the items inside each cell.
-
Set the table's width for TableView
I am creating a new TableView with few columns and I am trying to set the width for the entire table. I searched the API but it only gives me setMaxWidth. I tried but, it didn't work. Can anyone suggest me how to set the tables width.
I am doing this:
private TableView<XYZ> table = new TableView<XYZ>();
table.setMaxWidth(600);
table.setLayoutX(15);
table.resize(40, 40);
But nothing really changed the entire table's width.
thanks.Column resize policy is what you are looking for.
-
Setting column width in OBIEE Answers report
Hi All,
Not sure if this has been asked before in the forums, but I did not succeeded in finding any clues. We have an OBIEE 10g Answers table view report that we need to display on our dashboard. The problem is that we need to set some width for all the columns in the report so that report does not extends horizontally as data in column grows but not much luck setting width in Column Properties. Since I am a newbie in the world of OBIEE, so I would appreciate any guidance with setting widths in an Answers report.
Looking forward to your responses.
Regards,
MariaHi,
The best option to do this is :
1. Create a report which has less data. And in the column properties hide it.
2. Edit the Dashboard page and there is an option called 'Add Column'
3. Place the report with the hidden column.
4. Please hide the complete section and remove the collapsible. And save it
5. When you view the report, it would not appear in the page but you can view the desired report.
Please let me know if you still face issues.
Regards
MuRam
Maybe you are looking for
-
My 2009 iMac can connect to my 2013 iMac, but not the reverse. My 2009 can play anything from the 2013 iTunes, but not the reverse. When this problem happened there was also a problem of the sound not working on the 2013 iMac. I went through all the
-
How do i show mulitple parameters in a header?
Post Author: Annette CA Forum: Formula here is my delima... I have a parameter that asks for a certain resource unit id which is a number. So the user chooses #31 which has an abbreviation of ORA. or they can choose #53 which has an abbreviation of O
-
India: how to handle material with excise inventorised?
Dear all, following setup was planned for purchasing trading goods locally to depot: 1) Flag material as non cenvatable in J1ID and remove the Cenvat determination for the same 2) Create PO with this material using tax code deductable, no excise gets
-
How do I re-populate iTunes from my iPhone?
My Mac hard drive crashed. The disk was lost completely. The Apple store staff gave me a new hard drive, which is a basic OS load. I need to get the contents of my iPhone (music, contacts, the few photos I have left) transferred to the iTunes libr
-
Help setting up sharing for music playlists family sharing vs home sharing
how do I set up sharing for music playlists for my iPad ios8 and sister new iPad. previous set up was home share between our macs. Now want to share with iPads added to the mix does family share offer playlist sharing how does (or not) match come int