Setting target for the handler in CPO

Hi,
I would like to know how to set the target while invoking a handler at CPO end from CPSC. For testing at CPO end, i usually set the target at start time or as a default target. But i need to select the target based on the user who invokes the process. So how can i set the target for this scenario? My process is a webservice triggered and user trigerred one. There is an option of setting the target of Webservice triggering event's target. But am not able to configure that properly. Could anyone please help how to resolve this?
Anish

"Web Service Trigger" will always have the same target (Automation Service), so that will not be particularly helpful to what you are trying to achieve.
I think you may want to approach this a little different.
Suppose process A is the process for which you want to dynamically choose a target, based on how it is invoked (via a Northbound Web Service with some parameters or by a end-user or perhaps on a schedule).
Move most of the functionality of the process A into process B.
Modify process A to call process B.
Add "steps" to process A, before the call to B, to find the target that you want. You can use "Find Target" activity and utilize properties of the trigger to determine the right target. For example, if the name of the target is passed as a parameter to the process or if there by looking up the target in a table variable "username to target".
Call process B and use the target found in "Find Target" activity, instead of the one that process A is running on.
I hope that makes sense.

Similar Messages

Setting targets for the KPI's

Where and how do you set the target for the KPI?
I see that there are input ready quesries available to set targets how to use them?
Can you only set targets for base KPI's?
How and where is the data collected stored for the KPI's? in the standard cube given as business content?
I would really appreciate your input Gurus.

Hi Sijesh,
I am also, currently working on a project implementing BO SuPM Version 1.0. Landscape is ECC -> BI -> SuPM dashboards.
I have created a KPI in SuPM dashboard.
Case 1 : Automatic data collection - This KPI is marked for Automatic data collection. So, maintained Scripts with Connectivity and SAP BW Query name. I save this KPI and include in a new report and Run it. There are no records displayed.
Case 2: Manual data collection - This KPI is marked for manual data collection. So, maintained values in SuPM portal itself. I save this KPI and include in a new report and Run it. There are no records displayed.
Could you please help me how KPI in SuPM be filled manually and automatically ( from BW Query)?
Thanks,
Best Regards
PhaniRaj

HT204053 I have tried to load iCloud onto my Vista opperated pc but do not get a control panel with which to set it up. Each time I use my iTunes id to log into the iCloudI am told that it is an apple id but not set up for the Cloud. How do I get the cont

I have tried to install iCloud on to my Windows Vista pc. No control panel is present and when I try to login to iCloud using my iTunes id, I am told that it is an Apple id but not set up for the cloud. without the control panel where do I set up my iCloud id?

You can not setup a new iCloud account using a PC. You must use an Apple device (Mac or iPhone/iPad) to create the account, then sign into it using your PC.

What is the factory set password for the administrator for a macbook pro 13" retina display?

what is the factory set password for the administrator for a macbook pro 13" retina display?

Welcome to Apple Support Communities
Macs don't come with a password. You have to set up the password during the initial setup. If you have forgotten your password, follow these steps to reset your password > http://discussions.apple.com/docs/DOC-4101

Process open items: how to set defaults for the additional selections

Hi FI experts,
Can anyone tell me if it is possible to set defaults for the additional selections in the processing of open items.
I am using transaction F-04 (or F-06 or F-07) to post with clearing.
When processing the open items I can use additional selection parameters. In my case I need to use the document type. I would like to save this selection as a default but this doesn't seem to be possible.
1. it is not possible to save a variant for the processing of open items
2. I can not create a variant transaction (with trx. SHD0) for F-0x since this is only possible for dialog transactions
Do you see another way to store defaults for the additional selections in open item processing?
Thanks a lot.
Dimitri

Hi,
When you create a transaction variant from FB05, then also you will not able to default the value for additional selections variable. Hence SHD0 is not going to help.
As said above, either you can change the additional selection screen parameters, but here again you can't default the value. You can only reduce the number of entries on the screen.
Else you can create a custom transaction code by copying the standard. Even SAP recommends to create custom codes from standard tcode for clearing purposes depending on requirements.
Please check this link:
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/41/37b8e7455b11d182b40000e829fbfe/frameset.htm
In the above link, in navigation choose clearing -- Specifications for processing open items
If it is a custom transaction then you can default document number.
Regards,
Ravi

The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.

When I try to install Connection Broker on a Windows 2012 R2 Server in a Windows 2003 domain I get this error:
The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.
Pooled virtual desktop collection name: NULL
Error: Logon to the database failed.
I have added both the Connection Broker server and the 2 remote desktop servers (also Windows 2012 R2 Servers) to the "Windows Authorization Access Group" in the domain according to this: http://support.microsoft.com/kb/331951
But it still does not work :-(
I keep getting same error....
Any idea what I might be missing ?

Hi,
Thank you for posting in Windows Server Forum.
Firstly please let us know by which method you have setup RDS role. You can have more advantage and feature when you will install with Standard deployment instead of Quick start deployment. So if you have setup with quick start option then you can try installing
with standard type and check the result.
In addition, please check SQL server database is properly configured for RDS server. Also check that domain controller properly communicates. Kindly go through below thread for more information.
Server 2012 RDS - Remote
Desktop Connection Broker Client failed to redirect the user domain\username. Error: NULL
Hope it helps!
Thanks.
Dharmesh Solanki

Which are the setting values for the Virtual CTI Driver? (Siebel Communica)

hi everybody,
the application I'm using is Siebel Communications 8.1.
I am learning about integration processes with the Siebel Communications Server Administration Guide. One of the points or topics there is the use of the Virtual CTI to integrate your Siebel Business Applications with Oracle Contact Center Anywhere (as in the bookshelf described).
I've read, with this driver agents can access communications functionality using the communications toolbar.
The Virtual CTI is a driver provided by Oracle. You can't see it listed on the Administration -> Communications ----> Communications Drivers and Profiles. So I guess it is important to add this driver to the list.
I have questions about that:
1. Should I add this driver to the list? or when can I do that?
2. Which are the setting values for the mentioned driver?
- Communications Channel?
- Inbound Yes
- Outbound Yes
- Interactive
- Channel string
- Library name
Could anybody help me? I would appreciate that.
Regards

Thanks for the reply KT.
I am not sure how to set a new custom style, but will look it up. If you have a url that points to the topic I would appreciate it.
Thanks,
Rhek

I am missing "other" as a target for the result state

Hi,
I am trying to implement a quite complex scenario using guided procedure design time.
I am not able to find other as a target for the result state of a callable object (the system proposes me just the sequential action or termination, nothing more, so I am not able to change my flow as I would like).
My portal is NW04s SP10.
I fount that target (other) using a portal sp11, so I suppose that it could be a problem concerning sp10 release, but I was not able to find a confirmation for that
Regards
Giuseppe

Hi Giuseppe,
If I have well understood youre trying to call in result state an action that is not in your current block.
To do this you have to install SP11 and the other will appear as possible choice in the result state target.
Regards
alessio

I am setting up for the first time, i didn't get the print out while setting up with my sign info

i am setting up for the first time, i didn't get the print out while setting up with my sign information. None of my email information or original password are working.

Hi there, what printer model do you own?
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

ISCSI targets for the Mac

I setup a VMware vSphere 4 Server with RAID 10 direct-attached storage and 3 virtual machines:
- OpenSolaris 2009.06 dev version (snv_111b) running 64-bit
- CentOS 5.3 x64 (ran yum update)
- Ubuntu Server 9.04 x64 (ran apt-get upgrade)
I gave each virtual 2 GB of RAM, a 32 GB virtual drive and setup a 16 GB iSCSI target on each (the two Linux vms used iSCSI Enterprise Target 0.4.16 with blockio). VMware Tools was installed on each. No tuning was done on any of the operating systems.
I ran two tests for write performance - one on the server itself and one from my MacBook Pro (10.5.7) connected via Gigabit (mtu of 1500) iSCSI connection using globalSAN 3.3.0.43.
Here’s what I used on the servers:
time dd if=/dev/zero of=/root/testfile bs=1048576k count=4
and the Mac OS with the iSCSI connected drive (formatted with GPT / Mac OS Extended journaled):
time dd if=/dev/zero of=/Volumes/test/testfile bs=1048576k count=4
The results were very interesting (all calculations using 1 MB = 1,084,756 bytes).
For OpenSolaris, the local write performance averaged 86 MB/s. I turned on lzjb compression for rpool (zfs set compression=lzjb rpool) and it went up to 414 MB/s since I’m writing zeros). The average performance via iSCSI was an abysmal 16 MB/s (even with compression turned on - with it off, 13 MB/s).
For CentOS (ext3), local write performance averaged 141 MB/s. iSCSI performance was 78 MB/s (almost as fast as local ZFS performance on the OpenSolaris server when compression was turned off).
Ubuntu Server (ext4) had 150 MB/s for the local write. iSCSI performance averaged 80 MB/s.
One of the main differences between the three virtual machines was that the iSCSI target on the Linux machines used partitions with no file system. On OpenSolaris, the iSCSI target created sits on top of ZFS. That creates a lot of overhead (although you do get some great features).
Since all the virtual machines were connected to the same switch (with the same MTU), had the same amount of RAM, used default configurations for the operating systems, and sat on the same RAID 10 storage, I’d say it was a pretty level playing field.
At this point, I think I'll be using Ubuntu 9.04 Server (64-bit) as my iSCSI target for Macs.
Has anyone else done similar (or more extensive) testing?

I had a lot of trouble with SimCity4 on my iMac. It became such a headache that I returned it to compUSA. It ran very choppy and crashed repeatedly when the city began to develop. My system FAR exceeds the system requirements for the game, and after some online research I discovered that I am not the only person to have this trouble with SimCity running on 10.4. I have also read problems concerning the SIMS2. Some of what I have read indicates that 10.3 runs the games fine, but 10.4 causes them to crash. I don't know if this is the case, but I do know that I am now very weary before dropping $50 on a game that may not perform on my computer as it claims to on the box. Some people trying to run games are talking about waiting for Mac OS updates that will allow them to run smoother.
I would check out what gamers are saying before buying anything
http://www.macosx.com/forums/showthread.php?t=226286

How to set widescreen for the guest OS (Oracle Linux 5) in Oracle VM 4.1.12

Hi all
I have got a concert about how to set the guest system(Oracle Linux5) to use widescreen? appreciate whatever you can help!
Thanks,

You're looking for the VirtualBox forums. https://forums.virtualbox.org/
This forum is for discussion of Oracle VM Server.

Set data for the x-axis

Hi,
I made a program which allows the user to configure and measure Temperature and voltage using a DAQ device. I also set a possibility for the user to save his data of his test to lvm file and then upload and read it on a waveform chart. My problem is that while the user gets multiple plots represented in the y axis (the different Temperature/voltage channels signals of the DAQ), the x-axis is set to time by default.
How can I change it? I would like to allow the user to change the x-axis from time to one of the plots of his tests data.
for example, lets say I get 2 signals of temperature (mod1/ai0 and mod1/ai1) and 2 signals of voltage (mod2/ai0 and mod2/ai1) on the y axis (amplitude) during 3 hours (represented in x-axis) and I would like to allow the user the option to play with the data so he can see temperature on the y axis as a function of the voltage on the x axis (instead of time) and the option to configure any kind of combination while the program is running (set mod1/ai0 in the y-axis and mod2/ai0 in the x-axis, for instance).
I have tried various things but nothing seems to work. It looks like it is very easy to change plots between multiple Y-axis with property node of "Active plot" and "Y scale index" but I can't figure out how to change plots from the Y-axis to X-axis and vice versa.
I hope this clumsy message is somehow clear..
Thanks a lot in advance,
Shahar L.
Detectomat Gmbh
Hamburg, Germany

Hi Shahar,
You will have to use an XY graph, not a waveform chart, if you want to set the X-axis data. Under "Find Examples", see "Fundamentals"..."Graphs and Charts" for some examples of XY-graphs and how to use them. You can't change the X-axis data of a waveform chart, as you have discovered.
Hope this is helpful...
Diane

What should the moile netword setting be for the Driod maxx

I just got my Driod Maxx and the mobile network setting are set on global is it OK for it to stay there or should I can it?

As demmo86rt mentioned and SuzyQ I run my phones on LTE / CDMA for me I think my phones response to the Network is better in this setting but for some Gloabal will work probably just as Good, Something I want be made aware of there is new update that has recently came out for the Droid Maxx.. some customers / members on here are having issues with there phone after updating to this Latest update and possibly the one right before it,, My Droid Maxx is running Totally Fine as is with 4.4.4 system Version 21.11.21.obake-maxx.. If you have not updated and have this Version here I posted and your phone is running fine I'd keep it were it's at for a little while any way..
Hope this helps..

Setting Qos for the Cisco C20plus codec endpoints.

My company has implemented a cisco video conferencing system using the Cisco C20plus codecs as H323 endpoints.
We currently utilise the Optus evolve network (MPLS) for our WAN
Our network WAN utilises Qos per VLAN settings.
For example, phones are in their own VLANs per site and the video conferencing system has its own VLAN.
We policy map ACLs to the following Qos classes specified by Optus in order of priority (Highest to lowest):
Gold-RT
Gold-NRT
Silver-NRT3
Silver-NRT2
Silver-NRT1
Default
Cisco recommend that Gold-RT is reserved for audio (phones) so I would like to set the C20plus video and audio traffic in the Gold-NRT class.
This class has the DSCP bits set to af42 which is more than ample priority for the video conferencing traffic.
Can anyone tell me what ports I need to specify in a permit statement in the Gold-NRT ACL to apply dscp af42 to the video and audio traffic please?
All C20plus endpoints RTP ports range are set to 2326 - 2486 so I will need a UDP permit statement for those ports for the C20plus endpoint ip address.
Are these the only ports that I need add to the Gold-NRT ACL?

As Dejan has said, this question would be better placed in the TelePresence section of the forums where endpoints such as the C20 are discussed.
In any case, if you set your switch ports to trust the DSCP markings on the packets, the tags themselves can be applied on the endpoint.
If you go to the web interface of the C20 and log in, then go to Configuration > System Configuration > Network.
Scroll down near the bottom and you'll find the QoS section. Here you can set the Mode to "Diffserv" and set each of the individual values as required, ie, if you want AF42, enter 36 in the field (see the Assured Forwarding table on wikipedia for other value mappings).
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Setting icon for the JMenuItem

I am trying to set the Icon for the JMenuItem and not able to do so.
I have the Images directory in the classes which has all the images. Is this the way to give the dir path. When do I give '\' and when do I give '/' or'//' or'\\'? Thanks.
I gave
JMenuItem mnuitmFileNew = new JMenuItem(new ImageIcon("Images//new.jpg"));
and later in Jbinit() method I have this.
mnuitmFileNew.setMnemonic('N');
mnuitmFileNew.setText("New");
mnuitmFileNew.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
mnuitmFileNew_actionPerformed(e);
});

Hi,
I'm not sure if you've seen this yet:
http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html
If you still have any questions please post again.
Regards,
Matt
Java Developer Technical Support
Sun Microsystems

Setting target for the handler in CPO

Similar Messages

Maybe you are looking for