Setting up harddrives for logic: Journaling? Spotlight?

Would turning off journaling, hiding my media drive from spotlight and defragging my drive regularly be the best way to go, performancewise in Tiger?

In my experience, journaling isn't a problem when recording audio snippets. Can anybody else chime on this?
SpotLight, you don't need that turd, although it won't be a problem either, once the index is created: updating it only involves negligible CPU activity.
If you find you need to disable SpotLight, do it using the mdutil unix command, like this:
sudo mdutil -i off / /Volumes/<name of your audio volume here>
And remove the index file with the same command:
sudo mdutil -E / /Volumes/<name of your audio volume here>
As a matter of facts, simply dragging the volume to SpotLight's window for privacy sometimes leaves the voume in a corrupt state, I don't know why...
If you [ever] needed to re-enable SpotLight, just run the first command with an "on" instead of an "off".
NB: you must have admin rights to perform super-user do commands.

Similar Messages

Setting aggregation content for logical level in 11g

Hi Guys,
When working on with horizontal and vertical federation in OBIEE 11g with multiple data sources here in my case it is essbase and RDBMS.
1) pulled the columns and dragged into the concerened table.
2) The related heirarchies have been defined.
3) when trying to go to one of the LTS and trying to set the logical level aggregation im not able to see the levels columns corresponding nor im getting the get levels option to get them. where am i going wrong?
when im trying to join a fact by pulling it on to the fact...i can see the levels in content tab,but when i try to define levels and check it its giving me error "There are no levels matching the BI algorithm"
Any answers wud be appreciated.
TIA,
KK
Edited by: Kranthi.K on Sep 5, 2011 2:52 AM

It is autocreated,i dint customize it.....Im dropping the RDBMS table onto the Essbase cube dimension table and im not getting the RDBMS content levels that should be defined in the LTS of the table,and the RDBMS table has an level based hierarchy but still no sucess.
Any more ideas
UPDATED POST
Deepak,it was not helpful as i have gone through tht document before....Im trying it in all scenerios to figure out where actually it is going wrong.
If i dont find the path,i will let you kne what im trying to do so you can help me out.
UPDATED POST-2
Any more pointers from the experts.
Edited by: Kranthi.K on Sep 6, 2011 7:01 AM

Is Spotlight necessary for Logic?

I am having lots of problems with Spotlight, it keep reindexing forever. Is it necessary to have Spotlight active or would Logic suffer from switching it off?

Logic uses spotlight to keep track of your sample library etc.

New External Monitor for Logic on MacBook Pro - Suggestions

I'm in the painful process of updating my studio and now my large screen external monitor has started failing.
I know if this a pretty general question more suited to the MacBook Pro forum but I'd like some input from folks used to working with an application like Logic in a home studio environment.
I guess the issue for me is that I'm not getting any younger and my eyesight isn't what it used to be. One of the things specific to Logic and music software in general is that there are LOTS of very detailed dialog boxes with text that is not always height adjustable (yes I know about zooming and indeed I do lots of that but it gets quite distracting). The other factor is that I'm often recording and engineering myself which means I'll be sitting with a guitar in my lap or at a keyboard and can't always lean in too close to the monitor.
I solved this by buying a large 26" Acer which sits on my desk behind the Mackie MCU. To my left I've got the MacBook 15.4" Pro on a keyboard stand above my MIDI controller at a 45 degree angle to the desk.
It's worked quite well until the Acer seems to have become haunted. It will mysteriously reboot itself intermittently, going blank for a second, then showing the Acer logo and going back to picture. It will also turn itself on spontaneously when the computer is off (the status light is off and then turns itself on). It seems to detect when I'm in the middle of a really good session and starts resetting itself every 30 seconds or so. Then it will work fine sometimes for days or weeks at a time. I've checked it on 4 different computers, it malfunctions on all. I believe in may be a problem with one of the capacitors or the inverter, I'm not sure, but it's driving CRAZY at this point.
And of course now it's 3 months out of warranty and may be more expensive to fix than buying a new one.
So my issue is what monitor to replace it with. I've considered buying an Apple monitor, since the display is lovely to look at but there are a couple things that are deal breakers.
It's expensive. Very expensive.
Oddly you have to choose between a 24" and a 30", with nothing in between. Don't want to sound like Goldilocks here, but the 24 is tooooo small and the 30 is tooooo big.
Yeah I know bigger is usually better but since they bumped the native resolution of the 30" up to 2560x1600 it's really sharp but things like the menu text get really quite small. Yes you can reset to a lower non native resolution, but then you loose the sharpness. I tested Logic in the store on the 30" and it did look great but I found I actually had to move my whole body around to see things at the top and bottom of the screen.
Oh and did I mention that it's expensive? Jeez.
The 24" now seems to look a bit small to me after using the same resolution (1920x1200) on the Acer's 26" screen. (Ok, I think it's actually 25.5 but hey that half an inch can make a big difference and I will avoid making any bad jokes here).
And did I mention the Apple monitors are expensive? The 24" is almost 3 times as expensive as a cheaper alternative.
I also still have a PC here that I use (sorry) and the Apple monitors have very limited connectivity. So I think unfortunately the Apple monitors are out for me.
So I;m down to a couple other non Apple options. I will not buy an Acer again since I believe now that their quality control is not good and their support is absolutely atrocious. Shame I used to be a big fan of Acer PC's, but after owning a couple I'm steering clear.
My biggest issue right now is that most of the new budget monitors are geared toward 1080p HD uses so they are they are maxing out at 1920x1080 (16:9 aspect ratio instead of 1920x1200's 16:10). So the tradeoff here is that HD movies will look better in 16:9, but 16:10 gives you "squarer" pixels and more vertical resolution for screen hungry apps like Logic.
Any opinions on this? I'm a bit new to the Mac so I don't know if I'm really better off going with a 1920x1200 screen like the Apple monitors.
Also, I know this may just be a bug in the Acer's scaling, but if I switch to 1920x1080, I lose the menus off the top of the screen or if I adjust the vpos I lose the dock at the bottom. Downscaling to 1600x1050 or even 1024x768 works fine. If I get a 1080 screen and set the resolution appropriately will it work correctly and without too much distortion?
I'm also curious what is the best way to hook up the monitor? I'm currently using the DVI to VGA adapter that came with the MacBook. My Pro is the slighter older silver keyboard model so it has the standard DVI out. Will I see any real improvement by going over to using DVI directly?
Also I'm wondering how people feel about glossy vs matte for music. My current displays are the non-glossy and I do think I prefer them for detail work.
The candidates right now are
Hanns-G HH-281HPB 28" @300$. It's one of the only budget monitors that uses 1920x1200. All the right inputs (DVI, VGA). I'm just afraid this might be a bit too good to be true. It's really cheap and after having problems with a "cheap" Acer (although it wasn't so cheap 3 years ago!) I don't want similar problems. Stand has no swivel or tilt (a big problem for my use). Also that resolution on such a big screen might be good for me or it might look grainy I don't know I haven't seen it. Anybody have any experience with these?
Samsung P2770H 27" @339 Looks nice, good color. Sadly only 1080 native resolution. Stand doesn't swivel, but does tilt. No VGA input, so won't work with my old PC (although strangely it says it comes with a VGA cable). They get generally good reviews and I know Samsung makes very good flat panel TV's.
ViewSonic X Series VX2739WM 27" @350. Once again maxes out at 1080. It's fast (1ms), has VGA input. I've never been a big fan of ViewSonic but they do seem to have gotten better color-wise. Tilt no swivel and it's anti-glare (not sure this is a plus).
There are also similar options from HP, Asus, LG and Sceptre but they are all 1080. In fact outside of the Apples, the Hanns-G and a few expensive monitors from NEC they all seem to be 1080. So if I really want the 1200 the Hanns-G seems like the only way to go.
Any input here would be greatly appreciated.

No doubt, the Apple displays are gorgeous. The first time I saw the 30" display wow, I wanted one BAD and it's actually what prompted me to buy a "big" monitor. The colors are great with a rich wonderful saturation level and as usual for Apple the form factor design is stunning. You know for that picture quality I could even get over the sticker shock and save up for one.
Which is why I was so disappointed when I actually sat down in the store and started to use Logic on one. I imagine for doing video work, graphic design or darn near anything else, it would be great. But for Logic I just found myself bending and twisting trying to look at toolbar at the bottom and then up to look at the menus. And instrument or plugin displays that were hard coded to look OK at lower resolutions looked really, really tiny to me. For me and particularly using Logic having 2 slightly smaller displays at a 45 degree angle makes more sense.
And once again the 24 seems just a bit small. I don't understand why they have a 27" iMac but you can't buy a 27" display. So iMac 27" starting at 1699, subtract out the cost of the CPU and drive ie the Mini and I'd really buy one. Strangely you can buy a 21.5" or a 27" iMac. Or you can buy a 24" or 30" display. Hmmmm.
So don't get me wrong I'm not bashing Apple for being expensive. They put a lot of money into R&D and into really thinking about the form and the function of their products. As a recent convert from being a PC developer for 25+ years, hey I've more than sipped the Kool-Aid here, I've guzzled it. They make great products and yeah they're more expensive, because they ARE better! I've now got 2 MBP's, 2 iPods, I'm about to get an iPhone (silly "death grip" or not) and I really want an iPad. Heck I'd really love an 8 core MacPro if I could afford one (alas I can't).
I guess my only gripe here is that there always seems to be a little less choice in the Apple world. Yeah, I know they do a lot less volume than the PC clone world I just think that they always seem to have a big gap between the high end and low end with not enough in between. So you can choose between the lower end and one piece units with no expansion boards (the mini or the iMac) or go straight to monster tower MacPro (way over 3K with display). You can get a MacBook but then you have to put up with a small screen or go with MacBook Pro, which let's face it is a lot of computing power for someone who just wants to web surf and write some email without squinting.
So here I am stuck in the middle. I don't want to buy a HannspreeQG or another piece of junk that's going to last 3 years and 3 months because of a crappy $2 capacitor that no seems to able to fix or care about fixing. I'd like to buy a really nice Apple monitor, I just want a big monitor, not a huge one and not a "medium" one (I know I'm spoiled but 24" seems "medium" these days).
Sorry about the rant here but my monitor is shutting down every 30 seconds and I'm about to go completely insane and toss it out the window!!!
Really glad to hear about that 84' VGA cable. I never imagined such a thing existed or would work without some sort of signal boost on the way. Very cool for me. My electronic drum kit is in another room and I would love to have a small cheap monitor next to it for sequencing. I had my laptop on a stand next to it for a while but I began to get terrified that I'd let a drumstick slip and destroy my laptop screen. That would be a very bad thing. Thanks for the tip.

Logical level for logical fact table sources

it is clear that for fact aggregates, we should use the Content tab of the Logical Table Source dialog to assign the correct logical level to each dimension.
question is : is it mandatory to assign even for non-aggregates fact tables the logical level for each dimension (which normally should be set to the most detailed level of each dimension) ? is it any known issue if "logical levels"in content tab are not set ?
the reason I'm asking this is a strange bug I have (I'm not going to discuss it here) and then only workaround seems to be NOT setting the logical levels (on content tab) for logical fact table sources.
thank you !

If levels are not set: By default levels are considered as lowest level
It should not matter if you set or not
Generally we set for facts explicitly when we are using Aggregate tables.
Your current issue might be a case by case; I would suggest to check implicit fact, any table mapped to the source to force a join etc
Mark if helps
Let me know how it helps
Edited by: Srini VEERAVALLI on Feb 5, 2013 8:33 AM
Any updates on this?+_
Edited by: Srini VEERAVALLI on Feb 14, 2013 9:09 AM

An Intel iMac AND a MacBook Pro for Logic Pro?

I am torturing myself over this issue lately so any input you guys could offer would be welcome!
This is the situation:
After 3 months of serious debating whether to purchase a 20" Intel iMac or a MacBook Pro for Logic Pro, I went ahead about 3 weeks ago and got the iMac. My reasoning behind this was that even though I found the portability of the MBP very desirable, the iMac simply represented a better value with the big screen and bigger hard drive. Since getting it, I must say I love this machine and I have not had one single problem with it. Logic 7.2 runs like a dream on it. By the way, aside from maintaing my iTunes Library, occasional iLife stuff and web surfing with Safari, this iMac is for music production only.
But here's the problem:
Still, I can't seem to shake the desire for OCCASSIONAL portability. Keep in mind, I am only a "serious" music hobbyist; I create instrumental hip-hop, trip-hop, electronica style of music mainly with software instruments, loops and breakbeats. So needless to say, I don't tour or do a lot of travelling. But the prospect of being able to compose tracks or make beats in Logic anywhere is DESIRABLE to say the least. I could compose while sitting on the couch watching a game or laying in bed - even though I have no idea of how often I'd actually do that, just having the ability to do it is VERY APPEALING to me. Throw in the fact that the iMac currently shares deskspace with a PC that my wife uses - meaning that I often have to stop what I'm doing to let her use the space. With a laptop, I could move and still continue my flow. Lastly, I unfortunately have bad knees and a bad back so after a couple of hours (or 3 or 4) of sitting at the desk working on Logic, I am seriously hurting. Not comfortable at all. At least owning a MacBook would give me the option to move around to some place more comfortable if I desire.
So...
Even though I recently bought a wonderful iMac that works great, I'm seriously considering getting a 1.83 MBP with at least 1GB of RAM and the 100GB/7200 RPM drive to accompany it just for the portability factor. Sure, I could get a used G4 PowerBook or iBook, but all I own is the Universal Binary of Logic Pro; I would have a hard time accepting the decrease in speed I've gotten use to on the Core Duo. Besides, I inherently have a problem buying something (even used) that I know is old and out of date when the latest and greatest is available.
So here is the $25,000 question: Am I nuts for even considering this? Am I placing too much of a premium on the portability as I would use it?
This could easily be justified if I was a working musician on the road, but that ain't me. And you can believe that I'm definately not rich and thus don't have money lying around.
But I have obsessed over this so much lately, I feel that I almost have to get it just to put my mind at ease! I even briefly considered putting the iMac on eBay and just buying a MBP to replace it, but I love the screen real estate I get with the 20" iMac and I question if I'll be truly satisfied with a 15.4" screen FULL TIME. 17" might be better, but I doubt if I can wait until June for them to arrive. In addition, everything would connected via my wireless LAN and .Mac so file sharing should not be an issue.
Help!!!
What would you do? Sell the iMac or just get a MBP as cheap as I can?
Opinions, Please!
20" iMac Core Duo, 2GHz, 2 GB RAM, 250 GB HD, 128MB VRAM Mac OS X (10.4.4)

I love the portability my powerbook gives me. You can use a PB in your setup. You can run an external monitor for either PB or MBP. You can node. Universal Binary menas it is an application which has the components written for both PPC and Intel chips-so you don't need to do conversion. Nodes won't require you buy a nother license. so the answer is down to how much the 2 upgrades and 1 crossgrades will set you back vs how much use you'll get out of them. IMO the iMac is inexpensive (I mean that in a good way-worth hooding on to). Maybe just look at a refurb PB unless you really have the extra cash.

How to set print option for a Billing document using T-code VF02

Hi All,
Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
regards
Anand.

Enter the billing documents detail
Goto Goto> Header>Output.
Check the status for your output type in this screen.
If it is green then come back to the VF03 screen.Enter the billing document number.
Click on Billing document-->Issue output to.
Press (CtrlShiftF1) or click on the icon beside "Print options".
Here you can see the print preview.
If the status is red then click on the processing log.Here you will get the error messages.
If the status is in yellow colour,then click on the "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
Enter the billing document no
Go to Menu option -> Go to -> Header -> Output
In that screen you have to add relevant output type. (Standard output type is RD00)
Add that & press enter key
Highlight that line & press "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Press "Back" Button
again select that line & go to "Communication method" button
Set "Logical destination" as LOCAL"
Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
Press "Back" Button
Save
Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
You can see that output type line appear.
select that line & press "Print Preview" button or (CTRLSHIFTF1)
You can see the print preview.
Alternatively you can use VF31 to print multiple print outs at same time.
If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
Then normal way, print the billing from SAP.
It'll automatically send to your PDF writer. You can save it to the path you want,

Can't sync Digi 002 as an interface for Logic Pro 7

I discovered Logic about a year after I had already purchased a Digi 002, and have been using it as my interface for Logic Express for about 6 months.  No problems.  I upgraded to Logic Pro 7 last month and now get only garbled sound and the following error message. "Error while trying to synchronize audio and midi.  Sample rate 88215 recognized.  Check conflict between Logic and External Device."
I am trying to run Logic Pro 7.  I still also use Pro Tools LE version 7.0 which runs fine.  I can play itunes songs, Garage Band, movies, Pro Tools songs, etc., no problem, but not Logic Pro, or Logic Express.
When I switch to Built In Audio, Logic Pro works fine through the tiny built in speaker, but trying to use the Digi 002 as my interface all the sound comes out garbled.
I have been pulling out my hair for weeks.  Any help would be much appreciated.

Tony P.M. wrote:
The digi people also recommended buying the update for 7.3 and then updating to 7.3.cs4.  I am going to give that a try.  What does Pro App Support 4.0 do and where do I find it if you think that might help me?
That is what I'm running, and it works great. Give it a shot. You can do a search on this forum, or on the Apple Support section of the website, and search for that term (Pro Application Support).
Yes I have learned my lesson with auto update.  Live and learn.
Yes. Remember, a DAW machine is NOt a regular computer you can do whatever with. Audio software and hardware are finicky creatures that don't play nice if you're messing with their operating system willy-nilly.
I spoke with the Apple Store people today as well.  They suggest I spend $100 and sign up for one on one support and bring the whole **** set up in to the store and let them work on it. Seeing as how I am using a G5 tower, and we are talking about a digi 002 board, that is going to be alot of fun to lug across the mall.   I am just about that desperate though.  Any thoughts on one on one support in store?
LOL!!! they just want your money, and will most defniintely screw up your system. They'll update wrong, install stuff you don't want, and re-configure your system to THEIR liking. Stay away from the genius Bar. When it comes to Pro audio, they really know little or nothing. As an example, I went to my local Apple store recently and asked for a copy of Logic Pro. the helpful guy there responded "Logic what? we don't have that kind of software here."
Thanks for the help.  Again.
You're welcome. Hopefully soon you'll have it up and running.
Cheers

How to set-up Mainstage for 2 Keys, 2 patch lists in a single concert?

Am new to Mainstage and Logic. Need help ASAP for a show, please, and am too lazy to read the manual How do I set up Mainstage for 2 Keys with 2 performers each controlling a patch/set list of their own in a single concert file? First rehearsal is Monday (Memorial Day) with opening night a week from today, so time is of the essence, and your help is sincerely appreciated! Thanking you in advance. --Jon

koolzero wrote:
When I start TI after I pointed it to my repository I get a message that no packages applicable were found. I did not download all the updates just a few to test it, will it not work unless all updates are downloaded?
Did you change status from test to active in UR before downloading? If not you can change the downloaded items in the manage repository menu.
Assuming the items you did download were not already installed on your client with TI it should work.
Message Edited by zilla on 2009-05-06 10:23 PM
T500: Vista 32, 2.8GHz, 4GB RAM, 15.4" 1680x1050, 500GB 7200rpm, ATI Radeon HD3650 + Intel 4500MHD. T42: XP, 1.7GHz, 2GB RAM, 14.1" 1024x768, 250GB PATA, ATI Radeon 7500.

Missing Functionality -where do I set a budget for a Project?

Budgeting for Projects is non - existent
Budget for Profit and Loss for a particular project , How is it done ?
Does not work , No facility to put in Budget for a project ?
The report I am trying to run is:
REPORTS>FINANCIAL>BUDGET REPORTS>Profit and Loss Statement Budget Report.Then go to Expanded and choose a PROJECT, say MailOrder.
The result is that it will show the MailOrder project for the ACTUAL but it will show the whole company Turnover against the BUDGET column.
This is because there is no place to set a budget for MailOrder Project in the first place. So the question is where do I set a budget for a Project?
1 Budget setup screen - this has no facility to setup a budget for a PROJECT
2.Budget Profit and Loss - this has the facility to run a PROJECT budget but the figures for the Budget cannot be right because they were not setup in the first place.
PS MailOrder project is just an example.
Version: SAP BUSINESS ONE 2007 A Patch Level 41
Description of requirements: As above
(Valid as of: (Date that this legal requirement is applicable) N/A
Business needs: Customer cannot set the budget for a project and this effects their accounting.
Examples: (Please describe a typical example, how the functionality should work.)
Current Workaround: None.
Proposed solution: Create a Project and then be able to set a Budget for it
Edited by: Darpal Thiarha on May 14, 2008 10:34 AM

Hi Darpal/Kerstin
Please ignore my previous replies because I have now worked out why this idea will not work:
Kerstins' idea is based on setting up new Nominal Codes for every Project and for Every Nominal Code in the Profit and Loss structure. Apart from the fact that this will create a messy Nominal Structure with hundreds of Nominal Codes, the main issue here is the way the Cost Of Goods Sold is structured. The logic of our Nominal Structure for Sales and Cost of Goods is based on Item/Item Groups and the Nature of these Items. In our case we sell Skin Care products under 3 Brands. Say Brand A, B and C
So Brand A is summarised into one item Group and the ITEM GROUP is coded to Sales Nominal 20000 and the Cost of this group is coded to Nominal 30000. In Kertins suggestion, I would need to raise a Nominal Code 20001 for say Project Mail Order and 30001 for the Cost of Goods for Mail Order but this the Mail Order project is selling ALL our brands (A,B,C) - so you can see the problem here. You cannot use Nominal Codes for two different purposes and make it work. So the problem here is that my BRAND A summary will contain a Nominal with a Project Mail Order, that has SALES of Brand A,B,C. The Net effect will be that we will not be able to summarise anything in SALES and Cost of SALES in a logical way (Neither by Brand or By Project) and the Nominal Structure will be a mess.
My conclusion is that SAP b1 Sales and Cost of Goods section demands certain logic when building the Nominal Codes, and this is based on the NATURE OF THE STOCK ITEM and trying to superimpose the PROJECT issue into this, will never work. In my view, the PROJECT issue needs to be sorted without involving New Nominal codes and the starting point would be in sorting out the SALES and COST of SALES and the project Budget for this.
Please let me know if you need further illustration of the problem.

ATP Check Issue - No business system could be determined for logical system

Dear all
Got an issue while executing ATP check on a planned order in product view,
with a message: "No business system could be determined for logical system"
CIF setting wise:
regular business system group maintained and assigned in place,
master data wise:
business system group info fine in product master,
Is there anywhere suggested to check under ATP setting:
category, check mode, business event, check control/check instruction?
Your kindest enlighting is appreciated,
Thank you,
mandy

Dear Mandy,
usually this error is caused by a missing customizing entry:
spro:
Integration with SAP Components
   Integration via APO Core Interface (CIF)
     Basic Settings for Creating the System Landscape
       - Maintain Business System Group
       - Assign Logical System and Queue Type :
Please read the documentation for these two transactions and create the systems.
You need to specifiy there all systems that are in your BSG. The documentation for the customizing of 'name logical system' in APO says:
To enable the transfer of data between SAP R/3 and SAP APO, you need to name both the SAP APO system in which you are working and the SAP R/3 system to which you want to transfer data as logical systems.
I hope this helps.
Regards,
Tibor

How to set naming standards for SQL Developer

I am using SQL Developer version 3.0.04.
In the newly integrated and very useful Data Modeler, we can set preferences for the naming standards to be applied when creating logical and relational model objects ( primary keys, foreign keys, et cetera). I would like to know if there is a way to set naming standards for the relational objects we create in SQL Developer on existing tables ( ( primary keys, foreign keys, et cetera).
Any help in setting such preferences would be appreciated.

Hi,
If you want to set up a diagram for an existing database, you can use File/Data Modeler/Import/Data Dictionary to import its definitions.
Alternatively you can open a Data Modeler Browser (using View/Data Modeler/Browser), expand the node for Design "Untitled_1",
expand the node for Relational Models, and select Show from the Right-click drop-down menu for "Relational_1" to create a Relational Model diagram.
You can then drag Tables from SQL Developer's Connections tree onto the diagram.
Once you have a Relational Model you can reverse engineer it to an Entity-Relationship model using the << button in the button bar
(or by selecting "Engineer to Logical Model" from the drop-down menu for the Relational Model).
Note that there is now a separate forum for SQL Developer Data Modeler topics: SQL Developer Data Modeler
David

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

Identify Entities for Logical Data Model

Hi,
I donno exactly this is the correct forum for this question. I believe there are database experts here to help me on this.
I am in confusion that, phsically the data can be saved in a set of tables (4-5 tables). But different views (User Interfaces) and reports can be created from these tables.
Assume that,
View1 - Uses all tables
View2 - uses only 3 tables
View3 - uses only 1 table
Report 1 - uses only 2 tables
Report 2 - uses only 4 tables
Should my Logical Data Model reflect all these view1, view2, view3, Reprt1 and Report2?
How exactly do we need to identify the entities for Logical Data Model?
Could you please any one help me on this?
Thanks & Regards
M Thiyagu

sorry, i couldnt understand your query..
thanks,
baskar.l

Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal

Hi All,
I am trying to implement Oracle 10g RAC on my laptop using vmware and openfiler software . But while executing the command
#mkfs.ocfs2 -b 4K -C 32K -N 4 -L oracrsfiles /dev/iscsi/crs11/part1
I am getting the error
Format Error : mkfs.ocfs2 1.2.7 file system too small for a journal
Please anybody can help me to resolve this problem.
Thanks in Advance.

How large is the device that you are formatting?
The default journal size depends on the type specified. If none specified,
then it assumes "mail" which sets the default journal per slot to 256M.
If database type, default is 64M.
Use "-T database" to specify database type, etc.
BTW, one can always override the defaults. Say "-J size=16M" to make
a smaller journal.
man mkfs.ocfs2 and the user's guide has more.

Setting up harddrives for logic: Journaling? Spotlight?

Similar Messages

Maybe you are looking for