Setting up multiple actions in PS CS5.5 Mac

I cannot remember how to do this correctly, heres the steps. I know how to assign actions to one photo but how do I assign the same action to multiple photos as I can only get the actions to work on one opened photo at a time. I tried opening 2 or three photos in the same folder, hitting play and the acation is done for ONE photo only.
any help?

Basically it involves the batch command. Here is a link on how to do it. http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&ved=0CFMQFjAC&url=http%3A%2 F%2Fwww.michaelfurtman.com%2Fphotoshop_batch.htm&ei=5ScHT5mEMcawiQLVxv2kCQ&usg=AFQjCNE0PCc UTvBGMdnTO4t1KX0hdCV-Ew

Similar Messages

How do i set up multiple iCloud accounts on the same mac?

how do i set up multiple iCloud accounts on the same mac?

Interesting - I was sure I'd seen a note somewhere that it was only Mail, but this article:
http://support.apple.com/kb/ts4020
does say
Your secondary iCloud accounts can be set up and viewed in Settings > Mail, Contacts, Calendars on your iOS device, or Apple () menu > System Preferences > Mail, Contacts, Calendars on OS X Lion. You may choose to do this if you have a second iCloud account and need to access its Mail, Contacts, or Calendar data.
Note: While you can configure multiple iCloud Mail accounts in iOS, Push mail will only work for the primary iCloud account in iOS. Secondary account(s) will check for mail based on the settings in Settings > Mail, Contacts, Calendars > Fetch New Data.
It's not something I can test - I suppose the second account's data gets added to the lists in iCal and Address Book?

How to Undo Multiple Actions in ActionScript [CS5]

I am wwriting an InDesign extension for CS5 using ActionScript. I want to be able to undo a group of actions as a sungle transaction. In JS, I would use doScript() for this purpose.
How do I do it in ActionScript?
TIA,
mlavie

Harbs,
I read all the material on the subject (thanks for the reference), however I seem not to be able to pass parameters to the JavaScript (even primitive types), which is essential for what I want to do.
In fact, the example from the JS Scripting Guide doesn't work:
var myParameters:String = ["Hello from DoScript", "Your message here."];
var myJavaScript:String = "alert(\"First argument: \" + arguments[0] + \"\\rSecond argument:\" + arguments[1]);";
InDesign.app.doScript(myJavaScript, ScriptLanguage.javascript, myParameters);
Any ideas?
mlavie

HT2500 can i have multiple e-mail addresses with one mac account

Can i set up multiple e-mail addresses on one mac account

You can have as many as you want. Add an account with Mail Preferences > Accounts. Click the "+" button.

[AS][CS5] Multiple action folder scripts only 1 Indesign app

Hi,
With this post, I would like to ask a question.
If you use multiple action folder scripts that processes multiple files using only 1 Indesign application, can problems occure when multiple files are submitted at the same time?
How does applescript/indesign handles multiple use of the same application? Will an error be trown? Or do I have to build a check mechanisme to know if the app is "in use"?
Has the Indesign application a property "busy" or "In use"?
Kind regards
John

Hi Mark,
Thanks for your feedback.
If build a lock/unlock mechanisme in my folder action script to prevent simultaneous use of Indesign. In my script I write the current application state into a textfile.
John

Greatly reduced action performance in CS5

The bug issue text below wouldn't fit in the bug report form even though it's less than 2000 characters (another bug, perhaps?)
******BUG******
Concise problem statement: reduced performance in Action processing in CS5 compared to CS3
Steps to reproduce bug:
1. Create an image file, 8000 by 9880 pixels 16-bit RGB color.
2. The background can be any image, though I was using a scan of a test target with colored patches for scanner calibration.
3. Create a layer "final target" on top of the background. Set contents to transparent.
4. Create a selection 295 pixels on a side with rectangular marquee tool. Position this selection in the upper left corner.
5. Save the selection to an alpha channel "Grid Box."
6. Run an action with the following steps.
a. Load the selection "Grid Box."
b. Select the layer "final target"
c. Expand the selection 2 pixels.
d. Fill the selection with the foreground color.
e. Set the foreground color to white.
f. Select the background layer.
g. Move the selection 295 pixels to the right.
h. Save the new selection as "Grid Box", replacing the channel.
The use of this action:
Use the eyedropper tool to select a color from the center of the selected square, then use the magic wand tool to subtract from the selection using the color in the center of the square in contiguous mode with tolerance set to 8. Then run the action, and repeat the above process in the next selected square. In the scan I am preparing, there is a grid of colored squares surrounded by a large black border. The final result needs the black border eliminated so that the colored squares completely butt up against each other spaced 295 pixels apart.
So by running the action, the color in the center of each box is copied to fill the rest of the square selected area that's black, leaving the center portion intact. The copied colors go on the "final target" layer so the background layer is not disturbed.
If you need a copy of the action and/or the image file, contact me by email.
Results: In CS5 the action is unusable due to the long run time.
Expected results: In CS3 it works perfectly.

My theory initially was that you had given Photoshop just enough RAM to work efficiently with your CS3 setup, but perhaps because of differences in your Photoshop RAM setting or perhaps because Photoshop CS5 has more code in memory, it's starving for RAM under the same test, and goes to its scratch file for relief.
I created a test image and tried your action with a stopwatch.
Photoshop CS5 x64 on Windows 7 x64 (i.e., with plenty of RAM) takes 1.8 seconds to run through your action.
Photoshop CS5 32 bit consistently takes 6.8 seconds to go through the same steps. Notably it stalls on the Expand and Select layer "Background" steps for a few seconds each, where it blazed right through them in the 64 bit version.
In my case I have given Photoshop CS5 2897 MB to work with (89%). This number is larger on a 64 bit system than what you can set because Photoshop 32 bit can use up to a 3 GB address space.
I'll do tests next with earlier versions of Photoshop.
-Noel

Action Set renamed - Now actions won't run

I had a set of actions named "Kevin's Actions" to "Kevin's Actions CS5" (I have both CS5 and CS3 installed.
However, when I tried to run actions that had references to an action entitled "Kevin's Actions" it wouldn't run. Seeing the problem I tried simply dropped the CS5 and renamed the action set BACK to the original "Kevin's Actions".
THE PROBLEM: The actions still won't run.
Is there a way to get them running again? I really don't wan to have to re-creating them ....????
Thank,
Kevin

Hi guys,
Below are screen shots of the first action in the set, the First action it calls out and the error message I am receive. I checked spelling, spacing and capitalization and it all seems clean to me???? You'll probably have to enlarge these to see properly:

Issue with Opening Files using Multiple Actions

I've noticed a strange issue when I attempt to use multiple actions in my Captivate 4 project.
I have a button that does two things: open an HTML file in another window and make another button visible. Of course, for the Open URL or File action, I'm entering the name of the HTML file and select New from the drop-down list so it opens in a new window.
Captivate doesn't seem to store that setting. When I click OK for that dialog box and then OK for the button dialog box, it reverts back to Current.
Is this a bug or am I doing something wrong?
Here I am, setting the property...
...and here's me checking Captivate 4 to see if the setting "stuck" and seeing that it didn't:

Hi there
I've recently encountered that behavior myself. I found it was a lot more reliable to avoid using the Multiple Actions for the Button click. Instead, configure an Advanced Action to do the work and you should have better results.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Frame skipping from the Multiple Actions window (Cp4)

Can anyone remind me how to trigger this:
rdcmndGotoFrameAndResume := rdinfoCurrentFrame -10
but from the Multiple Actions window on Cp4?
I want to show a colleague how to set up a slide with multiple images that the learner can click as many times as they like to show relevant captions (and hide previously shown ones). Obviously the big problem is stopping the project from continuing until the learner clicks a separate Continue button.
Normally I'd use Advanced Actions and add the code above in addition to the show/hide stuff, but this time I want to keep things as simple as possible using Multiple Actions as it's far more intuitive - but it won't let me do this kind of assignment.
Any suggestions? One of the options is to execute javascript but I'm not sure what the javascript equivalent of this is, or even how it should get wrapped up in that window.
Thanks

As far as I can remember, you cannot create an 'expression' like this in Multiple actions, you only have the Assign action but the system variables that you can access with Assign are limited.
Moreover I want to warn you: Multiple actions were abandoned in Captivate 5 and later because they do not always function well. So be very careful using them.
If you want to show this, you'll need to use advanced actions, that have the possibility to access all variables and to create expressions.
Why do you rewind the playbar 10 frames?
Lilybiri

Stringing multiple actions onto one click?

Is it possible to have multiple actions happen, either simultaneously, or one right after another, with only one click causing this?

Yes it is. In the Build Inspector, click the button labeled "More Options", which will reveal the Build Order drawer. Here you can set which builds/actions occur in which order, which builds/actions occur simultaneously, and whether they are triggered by a click.

How do I set up multiple iMessage emails with one Apple ID?

We have one Apple ID and many family members with iPads, iPhones etc... As it stands we all receive all incoming imessages and this is impracticle moving forward.
Other than setting up multiple Apple ID's how do we set up each user with an individual iMessage address?
I understand how to do this using a phone numbers but cannot stop all users getting imessages sent to the Apple ID email address. I have tried inputting secondary email addresses but get error messages advising "account already in use".
Long story short.....Can I set up all family devices on the one apple ID but designate each member with an individual email address that precludes them from receiving iMessages sent to the "master" Apple ID address?
Phew
Thanks

To my knowledge, yes, this is impossible. Your primary iMessage account is your AppleID account, so as long as you all share the one AppleID, then all messages will appear on all iOS 5 devices using that AppleID for their iMessage account.
The only thing to do is have people set up their own iMessage ID. They can stil then set up unique "receive at" addresses, but these are really additional addresses for messages to go to, and do not get around the fact that the account itself is defined by the AppleID.
P.S. there is nothing stopping you from using the one, common AppleID for the iTunes and app store, then setting up a new one and just using that for iMessage.

How we set up multiple websites on OSX Server

BACKGROUND
After fiddling and futzing around for weeks (actually since last year) I've finally figured out how to set up multiple websites (virtual sites) using one port and one IP address. While there seems to be lots of discussion on this topic, it seems that the basic assumption is that one knows everything about websites, DNS and all that stuff, which I do not.
When our network was originally established the engineer set up a wiki and also configured webmail, so we had two sites, one secured for mail and the other open for Calendar and the wiki. We were not hosting any websites locally because our school website is hosted by a company in New England.
This year I wanted to set up websites for teachers and students. As great as the wiki is, there are some things it just can't do as well as a website. So I figured if I set up the sites teachers could link back and forth from one to the other. In addition kids could now start to use a real website instead of the cobbled together file mess I had when we ran a Windows network. Also iWeb is a much more accessible tool than FrontPage.
SERVER SIDE:
Snow Leopard Server - 10.6.4
There are two - actually three pieces if you want your iWeb clients to connect to the server: Server Side Web Services, DNS and, in my case, FTP.
================================================ SERVER SIDE - WEB SERVICES
If you haven't turned on Web services, you'll need to open Server Admin and do that. If you don't know how to set up web services - just reply and I'll step you through that as well.
Once web services are set up and turned on, you'll see it listed under your server’s name in the Server Admin sidebar. Click on "Web" and then click on the "Sites" tab at the top of page. This is where you list all your sites.
Click the plus button and enter the fully qualified name of your site, for example: "students.myschool.org". Don't use the defaults here (no name) - that's what got me in trouble before. BE SPECIFIC!
You'll be looking at the "General" tab (the other tabs, "Options", "Realms", etc. we'll deal with in a second).
On the "General Tab", the default IP address ("any") and port (80) is just fine. We'll run everything over port 80. (Apache figures all the virtual site stuff out - you don't need your rocket science degree for that.)
"Web Folder:" is important because this is how you'll "segment" your websites. While I would NEVER do this again, we have a solid state hard drive for the OS and a RAID array for our data files. IF you have that, make sure you do NOT use the default "Web Folder" because it will store all your files on your solid state drive. There may not be enough room, over time, on that drive. I've not experienced it yet, but it's my understanding that if the drive fills up, the server shuts down.
I store my web sites on a folder on the RAID array.
Everything else on that tab can be left as the default. (Just make sure that you have an "index.html" or "index.php" file in your web folder root, but iWeb will take care of that for you.)
I would put in your email address in the "Administrator Email:" field.
Under "Options" you really don't have to put anything. I've tested making websites with iWeb and it doesn't appear that anything needs to be checked.
Nothing needs to be entered in "Realms" as well from what I see working w/ iWeb.
The defaults in "Logging" are fine.
You can leave "Security" alone, but we do have a (self-issued) certificate listed for our webmail site.
"Aliases" is important. Under "Web Server Aliases" you enter how you want the site to respond to when users type in a URL in their web browsers.
When our web server was initially set up the engineer set up "wiki.myschool.org" on port 80 and "mail.myschool.org" on port 443. In the aliases section was nothing but a "*" (the wildcard character). That means, from what I can figure out, that the webserver will respond to these sites regardless of what is typed in the URL. (Well, something like that - point is, if you create OTHER websites, you'll NEVER get to them because the wildcard character in the "Aliases" section, in effect, grabs those web requests and redirects them to the sites that are already there.
In my case I deleted both of those wild card characters. For my "wiki.myschool.org" site, I entered "mail.myschool.org". That means if you type EITHER "wiki." or "mail.", go to the site that’s stored in the “Web Folder” we set up when those sites were created.
For "mail.myschool.org" I just DELETED the wildcard character. I wanted that site (since it was secured) only to respond to "mail." - nothing else. (You're not going to that secured site for any other reason than to get your mail.)
"Proxy" can be left blank. Have no idea what that does. As time permits I'll do some research and figure out what it's used for.
"Web Services" is if you want to provide any MORE services to this particular site. Most likely you'll want to uncheck all the boxes. For our "wiki." site, we have checked "Wikis", "Blogs", and "Calendar". For our "mail." site we have those checked PLUS "Mail".
I would create a separate "Web Folder" for each of your sites. I don't know if that's a requirement but for housekeeping purposes, I would keep the sites separated. And I SUSPECT that it's "best practice" to separate your wiki from your other websites.
SERVER SIDE - DNS
OK...now you have to make your site reachable and the only way to do that is to set up DNS so that folks don't need to type in the IP address of your web server. You need to set up DNS inside your network and, if you want folks in the outside world to reach your website, you'll need to set up an external DNS as well. I'm going to cover INTERNAL DNS - if you don't know how to set up EXTERNAL DNS - reply or email me and I'll post those instructions.
Most likely you have already created Zones for you network...all you really need to do is create "Aliases" so that when you type "students.myschool.org" your web browser will know that site resides on IP address XXX.XXX.XXX.XXX.
If you've set up Zones then you already have a "Machine" setting that translates your server’s name to an IP address and vice versa.
All you need to do is create an "Alias" (CNAME) record for, in this case, "students". You’ll see the choices for types of records when you click the "Add Record" button.
There are only two fields to configure for a record: "Alias Name" - in this case "students" and "Destination" - in this case "servername.myschool.org". (You've already entered a machine record that says "servername" = 192.168.1.x.)
That's it for Internal DNS.
SERVER SIDE - FTP
Now you have to get iWeb to communicate with the webserver.
There are only three ways iWeb will communicate with webservers: MobileMe, Local Folder and FTP Server.
Local Folder is really only practical if you want to host a website on a laptop (I was blown away initially when I found out that all Macs had a built-in web server - how neat is that?). I think there are some very cool things teachers could do with configuration, and, of course, you wouldn't need to set up any web services on the web server, but that's for another discussion. You need to set up FTP services on the web server.
Turn on and enable FTP on your webserver.
You can leave the defaults for "General", "Messages" and "Logging". "Advanced" is the only thing you want to set. I set "Authenticated Users See:" to "Home Folder Only". I set the "FTP Root" to the same root folder in which I plan to store my web sites (/VOLUMES/RAID Array/WebServer/Documents). This setting sets that folder only to be accessible via FTP.
I would suggest returning to your DNS settings and adding one more "Alias". Set "ftp." to point to your webserver. Why? So folks can edit their sites from home (see below).
CAVEAT: If you are running FTP on other servers, make sure that the settings here do not conflict with the settings on the other servers. For example, I'm running FTP on my file server so that my scanners can communicate with it. However, I configure my FTP settings by machine name and NOT "ftp.myschool.org".
================================================
CLIENT SIDE - CONFIGURING iWEB
Now you have to configure iWeb so that it will communicate with your server.
Click on the "Site" icon so that "Site Publishing Settings" appears.
Publishing:
"Publish to:" = "FTP Server"
You can set the "Site name:" and "Contact email:" to whatever you want. But see below!
FTP Server Settings:
"Server address"=ftp.myschool.org (you could also enter in servername.myschool.org or the IP address. However, if you want folks to be able to work on the site from home, you will need to configure external DNS for that. If you use the IP address, you're out of luck for remote access to the site. (You can do it but it's beyond the scope of this discussion.)
"Username" & "Password" should be your user's network login credentials.
"Directory/Path" - this is important. Remember, you set your "FTP Root" to be "/VOLUMES/RAID Array/WebServer/Documents". If you leave this field blank then the website will be dumped into this folder. If you are only setting up one site, that may be OK. However I wanted to set up a "students" site folder, a "faculty" site folder and a separate site for our literary magazine.
THEREFORE: I have, in my ..../Documents folder (on the server), a "students" folder, a "faculty" folder, and a "litmag" folder.
SO...in my "Directory/Path:" field, I have "/faculty". That means the full path to this website is "ftp root/faculty" or "/VOLUMES/RAID Array/WebServer/Documents/faculty" (You don't need a trailing "/" character. iWeb will automatically append the folder for you user depending on what you entered in "Site Name:" in the "Publishing" area.
Website URL:
This is the root website depending on whether it is "students" or "faculty". Since iWeb will append the site name to this root website, I accomplished what I hoped to accomplish in this post (http://discussions.apple.com/message.jspa?messageID=12288561#12288561).
Faculty sites will be @ http://faculty.myschool.org/username. Students @ http://students.myschool.org/username. PERFECT!
iWeb is such a GREAT tool - NOW the kids can start using it!
I want to reiterate that this works for our school but it should work for you as well. There may be better ways to do this but it works for us.
Hope this has been helpful and you won't have to spend weeks trying to figure this all out by yourself!

OK...here's how we did it.
To get access to the website you created from outside your network there are a couple of steps.
First, you have to have a STATIC IP address from your ISP. If you have a T1 circuit, no problem...you usually get a couple of static IPs you can use. However, if you have a cable modem circuit, most likely you have a dynamic IP address which changes when you connect to the internet. Usually a static IP will cost a bit more because the ISP has to go through a couple of steps to set it up for you. But once you have the address, you now have a way for folks outside your network to connect with you.
(I’m also assuming that you use a router of some sort through which traffic flows out to the internet and that you aren’t using connection sharing or something like that.)
The next thing you need to do is have your new static IP address associated with the server on which you are hosting your website. You've probably already done that if your website works inside your network. However, you've associated a private ip (192.168.x.x, etc.) to your web server. That doesn't mean anything to folks on the outside because private IP addresses are just that - private - folks can't access them. (I won't get into VPN because that's a whole other topic.)
The way you associate your new static IP address to your web server is through some sort of dns application from your ISP. For example, we use TierraNet to manage our external DNS information. They have a web interface control panel that is very similar to the DNS interface for XServer. You can create CNAME records (aliases - other ways that folks can access your servers).
Basically you create an "A" (CNAME) record with a fully qualified domain name (e.g. webserver.myschool.org) and point it to your public IP address (XXX.XXX.XXX.XXX) which you just got from your ISP. It's going to take a while (24-48 hours) for this change to take effect. BTW, you can create as many “A” records as you want. For example mail.myschool.com and wiki.myschool.com could point to the same place.
You want to make sure that the fully qualified domain name you enter in the external dns utility matches the name you used when you created your internal dns records on your XServer.
OK...so now folks can get to your domain - but, remember, you have a private network IP scheme between them and you. You now have to tell your router that when web traffic arrives, allow it inside the network and direct it to your web server.
Let's say your public IP address is 205.100.112.50 and your web server is 192.168.0.5.
You have to create, in your router’s "Security Zone" (router companies call them different things) a couple of rules. Usually the first rule is: "Let everything inside the network get out to the web." You've probably already done that if folks inside the network can reach the internet.
You then have to tell the router to allow web traffic (port 80) into your network AND redirect that traffic to 192.168.0.5.
We use AdTran routers and they have a web interface which allows you to write "rules" affecting public and private traffic. Public is folks outside the network, private is folks inside.
AdTran calls them "Security Zones" and you modify those zones with policies.
So my "Policy" would say, in the above example, redirect traffic from my public IP (205.100.112.50) -> to my web server -> (192.168.0.5).
THEN you have to modify this policy with what AdTran calls "Traffic Selectors". You've said, OK, you can get in, but WHAT can get in?
The "Traffic Selector" is written to say: "Permit" "TCP" traffic from 205.100.112.50 only through Port 80. (That's the port that web traffic goes over. If you wanted a secure website, you'd add another traffic selector that opens port 443, for example.)
I'll tell you I'm no genius when it comes to this. I called AdTran and had them configure my router for me. I told them what I wanted done, they remoted into the router and configured it. But then I could go to the web interface and see what they did and then added rules later on when I wanted, for example, to get access to the network via Apple Remote Desktop or VPN into the network on my iPad.
I'd bet that your router has a maintenance agreement that includes this service and if it doesn't it should have.
I did find that I still had issues when I tried to set this up originally and it had to do with the ORDER of the policies. I can’t remember exactly what the issue was, but, effectively one of the policies highjacked traffic before the policy that I wanted got triggered. Simply moving them around in the list fixed that issue. So if you have this set up but still can’t access the site, check the order of your rules.
I don’t know if that helps or not, but I try to think about this stuff conceptually and then get someone to help me with the details. I work with this stuff so infrequently that I forgot how I did something 6 months or a year ago. I’m in the process of creating a wiki for the school which documents all this stuff, but that’s a major undertaking.
Cheers,
John

Currency setting in multiple company code.

Dear all,
we are having 3 company codes in one client.
and we have to set the Currency setting for multiple company codes.
Tcodes
S_BCE_68000174 - Enter Translation Rates
S_ALR_87003642 - Open and Close Posting Periods
it is not allowing us to set the values at a same time for different company codes by different users
it says " DATA LOCKED BY OTHER USER, ONLY DISPLAY MODE."
Pls assist
Thanks

Ask for access to delete lock entries. If access is provided, use T code sm12 to delete the lock entries.
@ Irfan you cannot do that. Only one user can use a table at a time.
It is like using an ATM. Only one person can withdraw money at a time.
Edited by: Dummy_Variable on Jul 27, 2011 9:34 AM

How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
http://lilybiri.posterous.com/question-question-slides-in-captivate
http://lilybiri.posterous.com/question-question-slides-part-2
Lilybiri

How can we assign one Attribute Set to multiple Business Partners at a time? Is it possible?

Hi,
Can we assign attribute set to multiple business partners at a time, is it possible in Marketing. I got an interview question please tell me if you know the answer. Thank you in advance.sh
Regards
Kishor Kumar.

Hi Kishor ,
We can assign attribute set to multiple business partner at a time using Report " Assignment of an attribute value to allbusiness partners in a target group".
This report can be access from sap guid Marketing->Tools->exter tools.
Regards,
Anju

Setting up multiple actions in PS CS5.5 Mac

Similar Messages

Maybe you are looking for