Setting up static IP address for my D110

I'm trying to setup a static IP address for my printer. I'm able to access the printer and get into the Embedded Web Server. After I change the settings and click apply, I get an error message that says:
An error has occurred. (wipv4Page-400)Click "OK" to go back.
The changes will not save. Any suggestions as to how to apply the changes?

Probably you are using Internet Explorer11, I have the same problem with that.
When using Google Chrome it works well, I think with Intenet Explorer 10 too.

Similar Messages

How to set a static IP address for deskjet 6940dt

I have two HP laptops, both have WIN7, that keep losing the IP address for my 6940dt printer, each time power goes out to router. I have an desktop PC connected to a NetGear router and RCA modem connected to Comcast cable internet. I also have another desktop that connects wirelessly through the router....but this desktop never loses the printer IP address and I can't figure out why it doesn't and my laptops do.
I have had a fellow at the senior center computer club tell me that I need to set a Static IP address to make the laptops connect . I don't know how to do this and I would need someone to explain it in a language that I can understand, like real basic. I have searched the internet but the things I have found have been very complicated to understand.
Can anyone help me?
This question was solved.
View Solution.

Ooops, sorry, I forgot that yours is a wired-only network printer.
You are on the right track - just go to where you were and follow my directions - it all works the same with wired as it does wireless.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Setting up Static IP addresses

In the FAQ entry for setting up static IP addresses, it says to set the "Preferred DNS server" to: 192.168.1.1
Currently, mine is set to: 68.94.156.1
with an Alternate DNS Server of: 68.94.157.1
Now, I'm wondering, does the Prefered DNS [i]have[/i] to be 192.168.1.1 or will what I currently have work just as well? Also, am I supposed to have an Alternate DNS server, and if so, is what I currently have it set to fine? Lastly, do the DNS servers have to be different for each computer?
Any help would be great. I'm hoping to try and re-setup my router tonight.

Kind of off topic, but don't want to make a whole new thread...
Currently, my home network is very messed up. Previously, we would lose connections upwards of 4 times a day.
At first, we thought it was because our modem was getting old. So my dad bought a new modem. But when he finished hooking up the modem, we still couldn't connect to the net, so he plugged his comp directly into the modem instead.
Now, in an attempt to get things working, I have reconnected the router, modem and computers to eachother. However, there is a problem. I can't access the router's setup page from my computer anymore. The lights on the router and modem indicate that:
1. The modem is connected the net.
2. The router is connected to the modem.
3. 3 devices are plugged into the router.
Now, I have two wired comps, 1 x-box and a wirless comp. and I am using the WRT54G router. I don't understand why this computer cannot connect to the router. I know it is just this comp, because the wireless one can access the router's setup page, although it still can't connect to the net.
Could someone give me an idea as to what the problem is? The only thing I can think of is, maybe instead of running a cable from the router to the computer, I ran it from the printer to the computer (they are right next to eachother). But don't think printers even use ethernet cables.

PowerShell script to set VM static IP address - multiple subscriptions

Hi,
I have set successfully static IP Address to all of my virtual machines until now (1 subscription) using Set-AzureStaticVNetIP
But now I have 2 Azure subscriptions. The virtual networks names are the same at both of the suscriptions.
The question is:
How to define the subscription to use when defining static IP addresses to VMs?
Thanks in advance!

Hi SCCMadmin09,
Considering that you have successfully set static IP Address to all of your virtual machines until now for one of the subscriptions :
Login to your Azure account with the command ; this time you should be entering your second subscription login credentials.
Add-AzureAccount
Add-AzureAccount
: This will open a windows login dialog that will allow you to enter your credentials of the second subscription.
Now you need to find the name of the subscription you created your virtual machines under. The command is:
Get-AzureSubscription
The output will give the Azure subscription information
Here in the example, Visual Studio Ultimate with MSDN a/c is used. The command to select this is:
Select-AzureSubscription
: Select Azure Subscription: Enter your subscription name and then ENTER:
Eg : Visual Studio Ultimate with MSDN
At this point you are connected to your subscription and can begin to work with the virtual machines created under it.
There are two parameters you will need to have:
ServiceName
= the name of your virtual machine. Example :
DTechHST-Test01
Name
= the same name you entered as the ServiceName
And finally the commands, there are three.
Get-AzureVM -ServiceName <your_vm_name> -Name <your_vm_name>
Set-AzureStaticVNetIP -IPAddress "<your_new_ip_address>"
Update-AzureVM
Unfortunately, entering these commands one at a time fails. They must be strung together via “pipes”.
Get-AzureVM -ServiceName <your_vm_name> -Name <your_vm_name> | Set-AzureStaticVNetIP -IPAddress "<your_new_ip_address>"
| Update-AzureVM
As an example:
Get-AzureVM -ServiceName HST-Test01 -Name HST-Test01 | Set-AzureStaticVNetIP -IPAddress "192.168.224.50"
| Update-AzureVM
In the event that you need to remove an assigned IP address, use the following command structure.
Get-AzureVM -ServiceName
<your_vm_name> -Name <your_vm_name> | Remove-AzureStaticVNetIP | Update-AzureVM
Hope this helps.
Regards,
Shirisha Paderu

How can I set up iCloud for my wife's computer and iPhone 4S when I previously set up an iCloud address for her and now can't use it in the iCloud set up?

I set up an iCloud address for my wife, evidently before running the iCloud set up and now I can't connect her to
an iCloud email address through the set up because it is already in use?

I did not articulate the problem properly. I have the sign in for Birgit on Apple BUT I am unable to set up the
icloud.com email address for her because I had already established it before running the iCloud set up on her computer and now when I try to set up an iCloud email address for her through the iCloud application I can not do so because the email address is "already in use." I have no idea how to meld the two.

I've recently moved to UK from US and cannot get my billing address changed from a US one to UK therefore can't make any purchases.Have tried setting up new email address for new accnt but always ends up identifying me in US.Is this to do with my laptop?

Have moved to the UK from the US and want to use up credit on existing account. I no longer have those US card details, so whilst I have credit it is asking me for card details I no longer have, There is money to be spent, any suggestions? Also am wanting to use itunes UK so have tried to set up a new account but inspite of putting in UK address it is identifying me as inithe US. Is this to do with the laptop I've brought with me?

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

AAA static IP address for RA VPN Client

Hi,
my vpn group and VPN POOL is locally created in Cisco VPN router but users are authenticated through ACS, AAA server via TACACS. Now I want to assign the static ip address to VPN Client. Everything is fine but due to the application problem I want to give them the static Ip address from the VPN Pool. I have greated one pool in AAA server and also configure the client in AAA to get the static ip address but unable to do this. Please help me out how to do this.
My router is configured for TACACS+. I have checked the user configuration in AAA server to get the static ip address but it is not working. Please help me out how to do this. I cant change Router to Radius but this is my main router which is configured for 160 sites through ISDN and these sites also configured for TACACS+.
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group Aviation-VPN
key egntosc
pool aviation-pool
acl avi-tunnel
save-password
netmask 255.255.255.0
crypto isakmp profile vpnclient
   match identity group Aviation-VPN
   client authentication list default
   isakmp authorization list Aviation-authorization
   client configuration address respond
crypto ipsec transform-set aviset esp-3des esp-sha-hmac
crypto dynamic-map avi 10
set transform-set aviset
set isakmp-profile vpnclient
reverse-route

Since you're using ACS, I believe the way to do this is to
go into ACS, and select the username of the user that you want
to get the static IP. Under that user's setup, there is an option to
always assign the same IP. Just select that and enter the IP you
want them to get. - chris

Allowing Static IP Addresses for Clients

When I setup my two 8510 WLC's, I think I may have not allowed static IP's for clients. How can I see on the CLI or GUI if that setting is enabled or disabled? I can't find this anywhere.

Thanks Steve. I looked at that piece of it and yes, it was fine. On the basic setup when the controller first comes up, there was an option for "Allow Static IPs" and I am pretty sure I said yes, but for some reason, I can't use any static addresses on WLAN's that I am able to use on other controllers. There is no command on the CLI that shows if that is enabled or disabled? It may not have anything to do with this as it may be a global configuration for allowing the controller to use a static. Not sure.

How to set a Static IP Address to a HP Photosmart Plus B209a-m?

Like it says up in the subject, I need to know how to do this. I tried to do it by typing in the IP of the printer into a browser, but then I lost connectivity with it all together. If someone could help, that would be amazing!!
Thanks in advance!
TechGirl88

First, let's see if your printer is actually connected to your network.
- Print a Network Config Page from the front of the printer. Note the printer's IP address. If it is 0.0.0.0 or 169.254.x.x then the printer is not connected. You will have to re-connect it using the same method you did originally.
Now that it is connected, this is how to set a static IP:
- Type that IP address into a browser to reveal the printer's internal settings. (if this does not work, you likely have a firewall and/or security system blocking it - please advise).
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know this, enter the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank. Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Is there a way to set a default From address for my iCloud account?

Is there a way to have mail use my .mac address as my preferred iCloud address? I have mail configured to set the From header based on the account I'm accessing, so my work email will come from my work account, and my personal email will come from my personal account. I'd like to keep that configuration.
Unfortunately, I use my .mac address for my personal email, and Apple keeps attaching new, unwanted email addresses to my iCloud account (.mac.com, .me.com and now .icloud.com). Mail somehow sees three addresses on my iCloud account, and defaults the From header to .me.com. For a variety of reasons, including personal preference, I don't ever want to use the .me.com or .icloud.com addresses.
Alternately, is there a way to delete the unwanted .me.com and .icloud.com addresses?
Thanks

I appreciate the reply, but it only gets me partway there. I already have that option set to 'Account of selected mailbox' so that replies to email on my work account (a non-iCloud account) come from my work email address.
My problem is my personal mail is on an iCloud account that, thanks to Apple, now has three email addresses associated with it. So when I reply to a personal email, the 'Account of selected mailbox' option frequently, but not always, chooses the wrong iCloud address for the From field.
Ideally, I'd like to be able to tell Mail that it should use my .mac address for email from my iCloud account, and my work address for mails from my work account. I'd like it to never use the .me or .icloud addresses. I don't think there's an automatic way to do that.
I'll likely end up filing a bug report with Apple.

HT204053 Is there a way to set up subsidiary email addresses for one appleID?

My children now each have an iPod touch and I'd like to set them up with, for example, the ability to facetime my wife or me without having to set up a new AppleID for each of them. All our music is consolidated on my AppleID and I don't want to change that!

You can create up to three email 'aliases' on your account - these are additional addresses (not accounts) which deliver into your inbox.
BUT
You will get all their mail and they will get all of yours: and once created you can never move that address away from your account to become a separate account, so that when your kids grow up and don't want you reading their email they won't be able to keep the same address.
So I would strongly advise you not to do that, but to create a new and separate iCloud account for each of them. You will find that much more practical and convenient.
There is no problem about iTunes: just go on using the same login for iTunes - it's perfectly possible to be using one ID for iCloud and another for iTunes, iTunes Match and iTunes in the Cloud.

How to set a static IP address on a Mac server?

I am setting up a New Mac server for a mail sever and have resieved the MX record and IP address from the ISP and DNS providers. Now I am trying to set up the server to be seen on the out side, or even on the network. Is this all done in the Network confiruration by maually setting the IP and Sub Mask there? I have set it all up to what I think they should be but not having any luck. When I installed the server software I told it to be a stand alone server was that wrong. I will not be running DNS or any other services on this system only Mail.
thanks

You should enter the IP address/netmask, etc. during the first-time-boot setup. Changing it later can be a PITA, but it sounds like you did that.
Setting 'standalone' shouldn't be an issue since that only relates to directory services.
It sounds like the problem is a more basic connectivity issue.
Have you verified that you have basic IP address connectivity? Can you ping the router address provided by your ISP? Can you ping remote sites outside your network? If that's not working you're not going to get much further.

How do i set up an email address for an hp photosmart 7510/c311a.

it looks like an email address was an assigned during printer setup - or if it was, i can't find it. the printer is a photosmart 7510 / c311a. when i go to the eprint center to create an account, i get a forbidden -403 error message. any guidance would be much appreciated?

These steps typically resolve the issue:
1. Press the ePrint button on the printer's front-panel screen (top row of icons, far left button), then press "Print Report".
2. Head over to the ePrintCenter website (http://www.eprintcenter.com/), and log in (or sign up for a new account if you don't have one).
3. Click the "+Add Printer" button and enter the printer code from the ePrint info page (“Print Report” page from step 1). Create a customized ePrint email address.
I just viewed the website on my computer, and it appears to be working okay on my end. It's possible that there's a setting in your web browser responsible for what you're seeing. I would recommend trying the following steps:
1. Try to view the site in a different web browser to see if that's the issue. Normally, Internet Explorer, Google Chrome, Firefox, and Safari all display the website properly. Try one or two of those (other than the one you've been using) and it should do the trick.
2. If that doesn't work, try resetting Internet Explorer's default settings by clicking "Tools" (on the top menu bar), "Internet Options" (usually at the bottom of that list), "Advanced" (far-right tab), and "Reset" (towards the bottom-right of that box). After resetting the defaults, try viewing the ePrint Settings area again.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How can I set my default email address for meeting invitations?

As I was adding a friend's and my lunch appointment in my calendar, I noticed an option to invite attendee. So I invited her and she accepted successfully. My question is that when I invited her, the invitation came from an alternate yahoo email address that I don't use often. I tried to switch the invitation to show it coming from my primary gmail address but couldn't figure out how to do it.
Any advice? Thanks!
Solved!
Go to Solution.

Go into OPTIONS -ADVANCED OPTIONS - DEFAULT SERVICES then make sure you select you change it to you primary email address and calendar.
Please let me know if you need further assistance, if not please resolve the post
Thanks!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How can I set up and email address for my grandson without giving him general access to the internet? email only

My grandson's school needs him to have his own email address. For some reason, his is not able to use my address. I do not want him to have general access to the internet. His older brother caused my computer to be infected with a virus in a very short time. It took three weeks and one hundred dollars to get the use of my computer back.
I do not want him to have access to the internet, but his school wants him to have an email address to communicate with him about school work. I am concerned that once he has an email address, someone (not the school) will send him a web site address in a message and he will be able to just click on it to get into the internet.

You can use an email program (e.g. Outlook Express or Windows Live or Thunderbird) and disable HTML for that email (text only mode) to access the email account. You can create a new email account if your your ISP supports it or use a online service that allows POP3 access with an email program (most popular services allow that).

Setting up static IP address for my D110

Similar Messages

Maybe you are looking for