Setting up user directories

Since there is no mod_edir function in Linux, I plan to do the following:
Build OES Linux A.M.P. web server, amd use the "UserDir" directive so that
when users type
"http://example.com/~username/" they will get content out of the home
directory of the user "username"
For now, I will have both a web and users file system on the Linux server
because I still have some apps the depend on NetWare running on our main
server, the main users home directory will be on Netware and the user web
directory will be on the Linux box. So, from the login script, I currently
map the users home directory to H: "Netware-server\users:\home\username\";
and their web directory to W:
"Netware-server\users:\home\username\public_html" as both reside on the
Netware box. With all else being equal, the users web directory will now be
on the Linux box under OES-Linux-server\user:\username\public_html. Should
I use NSS or the Linux file system for the partitions that will hold the
user directories so that they can map to them? I am new to Linux just need
some guidance.
Thanks in advance for your help,
Darrell Eddy

Darrell,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Ftp root and sharepoints setting bringing users right into home dir.

Hello, I pretty much understand the setup of ftp, but shouldn't the "ftp root and sharepoint" setting bring authenticated users into the ftp root first as the "/" directory? Then they should be able to access users since I have it shared and get into their directory if they need. But in my setup it brings them into their home directory first making it look just like the "home folders and sharepoints" setup. Any ideas?

This came up and bit me today, too.
If I set "Authenticated Users See:" to "Home Directory Only", it works as advertised and ftp users are dropped into their home directories.
If I set "Authenticated Users See:" to "FTP Root and Share Points", login invariably fails with the message "530 User username: can't change directory to /Users/username."
G5 Dual Mac OS X (10.4.8)

How to "bless" user directories copied to new iMac?

The old "source" iMac wouldn't boot Target Disk Mode, so I put the new Intel iMac in Target Disk Mode, then used SuperDuper to copy the user directories from the old iMac G5 to the new Intel iMac.
How do I correctly set up the NetInfo Manager records for the ported user directories?
Many thanks, Steve

It may depend on the history of the accounts on that machine, but as of 10.4, if you create a new account the simple way (using "System Preferences" > "Accounts") and a folder exists in "/Users" with the same short name, an option will often be presented allowing that folder to be "adopted" by the new account
Some notes:
The process involves a 'chown -R username:username' equivalent, and the 'uid' of the folder contents will be changed to that of the new user (whose 'uid' will simply be the next available number), as opposed to the user's 'uid' being matched to the folder. So if you have some sort of complicated user:group setup for items within the user's folder, or are trying to maintain consistent 'uid' values for users across multiple machines for NFS or whatever, don't use this method.
Also, if a group already exists with the selected short name, you will not be allowed to create the account, with the message along the lines that the name isn't available.
A couple of the things you mentioned reflect how users were configured in 10.2 and earlier. There have been a few changes to the contents of user records in "NetInfo" since then so I think it would be better to let the system create the accounts rather than doing it yourself - unless there are reasons not to, like the ones mentioned above...

Users Directories n GCC

hi everyone
i m new to sun solaris i dont know much about it
so i m using webadmin interface to configuring it
i have created some user accounts using smc before
and their default directories were in /export/home/
and wen i used webadmin to convert unixs users to samba users for the networking between windows and this machine
i have lost all the users default directories
i mean now wen i check /export/home/ there is nothing
i dont know where are they now
i think after converting unix users to samba users, directories path has changed
as i said i dont know much i cant find where r these directories now
and my system partition i mean root partition is almost full
i want to move data from here to some users directories
so plz help me to come out from this problem
and please tell me how to set path to get any software available for all users
i have sun solaris 10 and sungcc compiler is already there
and i log in using root account and my current shell is : /sbin/sh
# echo $SHELL
/sbin/sh
My path is : /usr/bin:/usr/ucb:/etc:.:/usr/openwin/bin:/usr/dt/bin
# echo $PATH
/usr/bin:/usr/ucb:/etc:.:/usr/openwin/bin:/usr/dt/bin
and wen i type gcc i got this msg
# gcc
gcc: not found
bcoz of this i ain't able to compile any software
cant run ./configure and make commands
plz tell me also how can i start working with this
thnx
anshul

I'ld modify /etc/default/login, uncomment the line beging with "PATH" and add "/usr/sfw/bin" to it.
7/M.

How to set Current User in moss 2007 for Authentication....

Hi Team,
We have current running website where we have user id to login but now requirement is that user will login with his Email address. Email is stored in active directory, I'm able to login with fba authentication.
I'm able to retrieve the user id of current user using Email but
I am NOT able to set that user id for current user for further authentication using Moss 2007.
Please find the source code for login and authentication page:
//---------------------------Login Page--------------------//
public partial class Login : System.Web.UI.UserControl
#region Decleration
string LoginStatus = null;
string UserCurrent = null;
static SPUser siteuser;
// private static string _randomNumbercheck;
//private static bool IsLoggedin;
Random random;
#endregion
#region Page Load
protected void Page_Load(object sender, EventArgs e)
this.hplchangepw.Visible = false;
this.hplmytask.Visible = false;
string desturl = SPContext.Current.Site.Url;
if (!IsPostBack)
try
string str;
SPWeb web = SPContext.Current.Web;
SPUser siteuser = web. .CurrentUser;
//SPUser siteuser = spWeb.EnsureUser(username);
str = (siteuser == null ? "" : siteuser.ToString());
this.Login.TitleText = "";
this.Login.DestinationPageUrl = desturl;
//if (HttpContext.Current.Request.UrlReferrer != null)
// if (this.Page.User.Identity.IsAuthenticated && ((Session["test1"].ToString() == _randomNumbercheck) || LoginControl.Class1.IsLoggedIn))
if (this.Page.User.Identity.IsAuthenticated)
// _randomNumbercheck = "";
this.hplregister.Visible = false;
this.hplforgetpassw.Visible = false;
this.hplchangepw.Visible = true;
this.hplmytask.Visible = true;
this.Login.Visible = false;
if (str.StartsWith("fba_"))
string name = str.Split(':').GetValue(1).ToString();
LoginnameLbl.Text = "" + name.ToString() + ", Haryana Urban Development Authority Welcomes
You. \"In The Service Of Masses\"";
else
string name = str.Split('\\').GetValue(1).ToString();
LoginnameLbl.Text = "" + name.ToString() + ", Haryana Urban Development Authority Welcomes
You. \"In The Service Of Masses\"";
else
this.hplchangepw.Visible = false;
this.hplmytask.Visible = false;
this.Login.Visible = true;
LoginnameLbl.Text = "";
HttpContext.Current.Session.Clear();
HttpContext.Current.Session.Abandon();
catch (Exception ex)
//HttpContext.Current.Session.Clear();
//HttpContext.Current.Session.Abandon();
#endregion
#region Get Audit Informations
public void GetUserInfo()
try
string user = Login.UserName;
SPSecurity.RunWithElevatedPrivileges(new SPSecurity.CodeToRunElevated(delegate()
using (SPSite oSite = new SPSite(SPContext.Current.Site.ID))
using (SPWeb web1 = oSite.OpenWeb(SPContext.Current.Web.ID))
SPListItem item = null;
SPListItemCollection listItems = null;
web1.AllowUnsafeUpdates = true;
siteuser = web1.EnsureUser(Session["User"].ToString());// spWeb.EnsureUser(login);
listItems = web1.Lists["Audit_Trail"].Items;
item = listItems.Add();
item["User_ID"] = UserCurrent.ToString(); //Request.ServerVariables["AUTH_USER"];
string ip = Request.ServerVariables["HTTP_X_FORWARDED_FOR"];
if ((ip == null) || (ip == "") || (ip.ToLower() == "unknown"))
ip = Request.ServerVariables["REMOTE_ADDR"];
item["IP_Address"] = ip;
item["Login_Date"] = System.DateTime.Now;
item["Login_Status"] = LoginStatus.ToString();
item.Update();
web1.AllowUnsafeUpdates = false;
web1.Dispose();
oSite.Dispose();
catch (Exception ex)
#endregion
#region MD5Encryption
private string MD5Encryption(string strToEncrypt)
System.Text.UTF8Encoding ue = new System.Text.UTF8Encoding();
byte[] bytes = ue.GetBytes(strToEncrypt);
// encrypt bytes
System.Security.Cryptography.MD5CryptoServiceProvider md5 = new System.Security.Cryptography.MD5CryptoServiceProvider();
byte[] hashBytes = md5.ComputeHash(bytes);
// Convert the encrypted bytes back to a string (base 16)
string hashString = "";
for (int i = 0; i < hashBytes.Length; i++)
hashString += Convert.ToString(hashBytes[i], 16).PadLeft(2, '0');
return hashString.PadLeft(32, '0');
#endregion
#region Generate Random Code
private string GenerateRandomCode()
random = new Random();
string s = "";
for (int i = 0; i <= 6; i++)
s = string.Concat(s, this.random.Next(10).ToString());
// _randomNumbercheck = s;
return s;
#endregion
#region Generate Random String
public string GenerateHashKey()
StringBuilder myStr = new StringBuilder();
myStr.Append(Request.Browser.Browser);
myStr.Append(Request.Browser.Platform);
myStr.Append(Request.Browser.MajorVersion);
myStr.Append(Request.Browser.MinorVersion);
myStr.Append(Request.LogonUserIdentity.User.Value);
SHA1 sha = new SHA1CryptoServiceProvider();
byte[] hashdata = sha.ComputeHash(Encoding.UTF8.GetBytes(myStr.ToString()));
return Convert.ToBase64String(hashdata);
#endregion
#region Check User Authentication
protected void Login_Authenticate(object sender, AuthenticateEventArgs e)
Utility hu=new Utility();
int CheckValue = 0;
string user = Login.UserName;
if(user.Contains("@"))
CheckValue=1;
//Encrypted Password
string HPassword = hash.Value;
// Verify that the username/password pair is valid
SqlConnection con = new SqlConnection();
SqlCommand cmd = new SqlCommand();
con.ConnectionString = System.Configuration.ConfigurationSettings.AppSettings["FBAPortalConnection"];
if (con.State == ConnectionState.Closed)
con.Open();
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "sp_Portal_ValidatePortalUser";
cmd.Connection = con;
cmd.Parameters.Add("@ID", SqlDbType.NVarChar, 256).Value = Login.UserName;
cmd.Parameters.Add("@Password", SqlDbType.NVarChar, 300).Value = HPassword.ToString();
cmd.Parameters.Add("@CheckVal", SqlDbType.Int).Value = CheckValue;
cmd.Parameters.Add(new SqlParameter("@P_Return", SqlDbType.NVarChar, 256));
cmd.Parameters["@P_Return"].Direction = ParameterDirection.Output;
cmd.ExecuteNonQuery();
string CurrentUserName = cmd.Parameters["@P_Return"].Value.ToString();
cmd.Dispose();
con.Close();
//int x = hu.ValidatePortalUser(Login.UserName, HPassword.ToString(), CheckValue);
if (CurrentUserName != "0")
Page.Session["User"] = CurrentUserName;
string UserName = Session["User"].ToString();
UserCurrent = UserName;
LoginStatus = "Successfull";
GetUserInfo();
e.Authenticated = true;
//Session["CustomAuthKey"] = MD5Encryption(Request.ServerVariables["Remote_Addr"] + Request.ServerVariables["Http_Cookie"] + Request.ServerVariables["Auth_User"]);
Session["CustomAuthKey"] = MD5Encryption(Request.ServerVariables["Remote_Addr"] + Request.ServerVariables["Http_Cookie"] + UserCurrent.ToString());
FormsAuthenticationTicket tkt;
String cookiestr;
HttpCookie ck;
tkt = new FormsAuthenticationTicket(1, UserName, DateTime.Now, DateTime.Now.AddMinutes(15), false, GenerateHashKey());
cookiestr = FormsAuthentication.Encrypt(tkt);
ck = new HttpCookie(FormsAuthentication.FormsCookieName, cookiestr);
ck.Path = FormsAuthentication.FormsCookiePath;
Response.Cookies.Add(ck);
else
// Username/password are not valid...
Login.FailureText = "Invalid Username / password";
e.Authenticated = false;
#endregion
#region Login Error
protected void Login_LoginError(object sender, EventArgs e)
// Determine why the user could not login
Login.FailureText = "Your login attempt was not successful. Please try again.";
// Does there exist a User account for this user
MembershipUser usrInfo = Membership.GetUser(Login.UserName);
if (usrInfo != null)
// Is this user locked out?
if (usrInfo.IsLockedOut)
Login.FailureText = "Your account has been locked out because of too many invalid login attempts. Please contact the administrator to have your account unlocked.";
else if (!usrInfo.IsApproved)
Login.FailureText = "Your account has not yet been approved. You cannot login until an administrator has approved your account.";
else
Login.FailureText = "Invalid UserName / Password";
UserCurrent = usrInfo.UserName;
LoginStatus = "UnSucessfull";
GetUserInfo();
else
Login.FailureText = "Invalid UserName / Password";
#endregion
#region Logged In
protected void Login_LoggedIn(object sender, EventArgs e)
string UserName = Session["User"].ToString();
LoginControl.Class1.IsLoggedIn = true;
//If User Email is [email protected] it will be invalid. Prompt the user to update the email id.
LoginControl.Utility hu = new LoginControl.Utility();
DataSet dsuser = hu.getUserDetails(UserName);
string email;
if (dsuser.Tables[0].Rows.Count > 0)
email = dsuser.Tables[0].Rows[0]["Email"].ToString();
if (email.Equals("[email protected]"))
Response.Redirect("/Pages/UserUpdates.aspx", true);
else
#endregion
//-------------------------------- Authentication code----------------------------//
private void authenticateuser()
try
if (SPContext.Current.Web.CurrentUser != null)
using (SPSite spSite = new SPSite(SPContext.Current.Site.Url))
using (SPWeb spWep = spSite.OpenWeb())
Utility hu = new Utility();
_userid = spWep.CurrentUser.Name;
DataSet ds = new DataSet();
ds = hu.GetPlotid(_userid);
if (ds.Tables[0].Rows.Count > 0)
_plotid = ds.Tables[0].Rows[0]["plotid"].ToString();
else
if (!SPContext.Current.Web.UserIsSiteAdmin && !SPContext.Current.Web.UserIsWebAdmin)
if (!SPContext.Current.Web.IsCurrentUserMemberOfGroup(SPContext.Current.Web.Groups["Allottee"].ID))
SPUtility.HandleAccessDenied(new Exception("You do not have access to this page"));
else
{ SPUtility.HandleAccessDenied(new Exception("Please login")); }
catch (Exception ex)
// lblMessage.Text = "Error:" + ex.Message;
ShowMessage("Following error has occured while executing the desried event :- " + ex.Message);
Mohan Prakash

1. Current work flow :-In web site the user have to register themselves in the web site and enters his details along with user id, password and email id. Once user
is registered then he will login with his user id and password. The user id is picked from login control and that set in “SPWeb.CurrentUser” as user id and system uses "Membership.ValidateUser" method to Authenticate user for login.
2. New Requirement: we would like to facilitate the user to login with Email id as well as user id.
Problem:
We replaced "Membership.ValidateUser" method to our own method to Authenticate user with email id/user id and password.
When user is login with user id and password it is working successfully but in the case of email id and password –“the email id is picked from user control and set as
"HttpContext.Current.User.Identity.Name" but we are not getting “SPWeb.CurrentUser” and it shows null value.”
We are able to get user id from database using email id of user. Please help us how we can set user id in "SPContext.Current.Web.CurrentUser".
Mohan Prakash

User Valid to changed while assigning role to a set of users in SU10

Hi All
I had a task of assigning a role to a set of users in various systems across landscape. I find that some of the users had their valid to date (logon data tab) changed to their last login date. Moreover, in every system; the list of user ids who had this issue of valid to date changed to their last logon date is different. It seems it occurs randomly in various system but out of every 10-11 users 3-4 get affected with this issue. Has anyone faced such an issue before and how could we resolve this issue.
Many thanks for your help and time !!
Best Regards
Prashant

Have you checked OSS notes? Maybe note 1325775 may be relevant for you.
Cheers

How to restrict manual setting of User Status?

Hi,
I have created an User Profile where a particular User Status is "set" based on the Business Transaction "Release".
However, we are also allowed to set this User Status manually without carrying out the Business Transaction "Release".
How do I restrict manual setting of those User Statuses that are "set" based on a Business Transaction?
Raj

Pete,
I did read that post. But it is about providing authorisation to set a Status for an User.
The case I am referring is, an User Status is auto set by a Bus. Trans Release. But I am also permitted to set the status transition manually. This way, Users tend to skip Releasing the Service Order. This is affecting upstream processes.
Is there a way where we can restrict manual setting of User Statuses that have to be normally auto set by Bus. Transactions?
Raj

How to set default User preferences in Analyzer for all users

How to set default User preferences in Analyzer for all users Hi, I would like to set some settings in Analyzer as default for all users. For example: 1. Display | Char 2. right mouse click on char | Chart Properties 3. Axes tab 4. "Format: Currency" i would like to change to "Format: Number". How to set default values to all users? Is this possible? Thanks, Grofaty

I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work. As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to. HTH

How to set the user's Default joboptions directory?

Hello Experts,
When we installed Acrobat Pro 8.x on our Win XP Pro systems our systems were NOT in a Windows Domain. At that time the default location for user-created/customized joboptions files was:
C:\Documents and Settings\<Username>\Application Data\Adobe\Adobe PDF\Settings
where <Username> is the name of the LOCAL Windows user.
A few years ago we migrated to a Windows Domain and converted our LOCAL users to domain users and disabled, but did not delete, the LOCAL user's account. We did not remove the LOCAL user's Documents and Settings directory structure either.
Our users now log into a DOMAIN rather than the LOCAL account.
As a result of that process the user's Documents and Settings directory structure changed to;
C:\Documents and Settings\<Username.DOMAINNAME>
where DOMAINNAME is, of course, our Windows Domain Name.
Now we are beginning to use Acrobat Distiller joboptions and I notice that when Acrobat/Distiller goes to save a user-created/customized joboptions file the default location has remained;
C:\Documents and Settings\<Username>\Application Data\Adobe\Adobe PDF\Settings
which is NOT the user who is logged in
Acrobat/Distiller should use the Documents and Settings directory of the user who is actually logged in which is;
C:\Documents and Settings\<Username.DOMAINNAME>\Application Data\Adobe\Adobe PDF\Settings
This anomaly has created some confusion and appears to have created a dependency of the old LOCAL user's Documents and Settings directory preventing us from deleting it.
Question:
How can we force Acrobat/Distiller to use the Documents and Settings directory of the logged in user (eg: the Domain user)?
In other words, how do we set the user's default joboptions directory?
Pointers/tips/and tricks are most welcome.

if the user is the one running the program, you can always get the home directory using System.getProperties ("user.home");
If you are trying to get the properties of another user, you could try using setProperties to change the user name first, before getiting the home directory, but it probably won't work because of the security manager. You could read the /etc/passwd file and parse the path out, but once again, the user of the code would have to have appropriate permission.

How to set Multi User Environment in the weblogic 5.1 and 6.1 server..(Urgently)

Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

Hi. A JDBC connection pool is a set of identical, interchangeable, pre-made
connections, and the controls to make sure only one user uses a particular
connection at any one time. If you want to have different DBMS users, you can
have a separate pool for each DBMS user, which may contain as many or few
connections as you want. Some applications has a pool for the accounting
applications, and another for the sales applications etc. Some do have a
separate pool for john, jane, joe etc, each with one connection. Pools
can be created and destroyed dynamically using the dynamic pool API.
Joe
softstar wrote:
>
Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

Data Slice dynamic activation and deactivation for a set of users

Hi Experts,
                 We have requirement to manually enter the data into RTC using IP.
There are 2 sets of users --> Power Users and Normal Users.
We need to allow the normal users to enter the data only from 1st to 5 th working day of every month.
Power Users should have authorization to edit and enter the data at any time.
Can any one suggest how to set the dataslice using code.
Regards,
Shashi

Hi.
Please note that update of RSPLS_DS table do not affects at RUNTIME.
If you want to create dataslice that activated and deactivated within sequence run you should do the next:
1. Create exit variable that return you all working days EXCEPT 1 to 5 of each month.
2. Create dataslice in modeler on this characteristic with restriction by this exit variable.
3. This dataslice should be based on ABAP class as described [here|https://www.box.net/shared/zhirrvk859].
4. In mydataslice method enter following code (I assume you have any DSO with definition whether user is power user or not. Lets say DSO has next structure:
USER   | Z_IS_POWER   |
aaaa    | NO
bbbb    | YES
Enter the next code in mydataslice method:
SELECT Z_IS_POWER FROM YOURDSO INTO lv_POWER WHERE USER=sy-uname.
IF sy-subrc = 0. *This is SUPER USER. Allow locked data edition
e_noinput = rs_c_false.
ELSE. *This is regular user. Do not allo locked data edition
e_noinput = rs_c_true.
5. Create in modeler 2 planning sequences for activating and deactivation dataslice as described in document.
6. Each time you want to do something with locked data run first sequence for deactivation of dataslice. If super user will run it so dataslice will be deactivated, but if regular user - dataslice will lock the data.
Regards.

Setting dynamic user in Approval task

While setting the user at runtime for approval task, I have created a Task Assignment adapter and associate the adapter in the assignment tab for the approval task. I have used reassignApprovalTasksToUser method of tcRequestOperationsIntf class. I have passed the task instance id as well as the user key. From the system console I am able to find that the adapter is invoked.
I have suppress the standard approval process using tcComplete task adapter.
When the requestor make the request and goto approval details page the system is showing the request is pending to the re-assigned user however when I login into the console using re-assigned user credential no request is pending in his work busket. What I observed, the request is pending in xelsysadm work busket.
Would appreciate if someone let me know the step which I am missing.

Yes, I suppressed the "Approve" Task in standard approval process.
Can you please let me know how to mapped the key type in the task assignment adapter.
I have created two variables in the adapter and mapped those two variables from the assignment tab of the approval task.
I have seen there are two more variables in the Adapters, "Adapter return value for Key type" and "Adapter return value for Key" and these two adapter variables are mapped as "Set at runtime".
How do I map these two variable?
No I do not find any exception with regard to execution of the task assignment adapter in the log.

Can i set multiple users for 1 ipad

I got my wife an Ipad. I want to know if I can set 2 users on it?

No. iOS is not a multi-user operating system. You can use
web-based email to keep your accounts separate and private,
but you can not have different logon environments like on
a desktop or laptop computer.

Exchange 2010 - Setting up Users Calendar with Free /Busy Details share permssion, Outlook 2007 client cannot open

Setting up Users Calendar with Free /Busy Details share permssion, Outlook 2007 client cannot open the user shared folder but if we use OWA 2010 or Outlook 2010 client no issue opening the user shared calendar with Free/Busy Details setting.
The follwowig error is reported
You do not have sufficient permission to open the calendar folder. you don't have appropriate permission to perform this operation.
thanks,
Hussain

Setting up Users Calendar with Free /Busy Details share permssion, Outlook 2007 client cannot open the user shared folder but if we use OWA 2010 or Outlook 2010 client no issue opening the user shared calendar with Free/Busy Details setting.
The follwowig error is reported
You do not have sufficient permission to open the calendar folder. you don't have appropriate permission to perform this operation.
thanks,
Hussain
I built this little command from the "CalendarProcessing" commandlet... it cleared up my issues ...
Set-CalendarProcessing -Identity joeuser -AddNewRequestsTentatively $false -AddOrganizerToSubject $true -AllBookInPolicy $true -AllowConflicts $true -AllowRecurringMeetings $true -AutomateProcessing AutoUpdate -BookingWindowInDays 0 -ConflictPercentageAllowed
50 -DeleteAttachments $false -DeleteComments $false -DeleteNonCalendarItems $false -DeleteSubject $false -EnableResponseDetails $true -EnforceSchedulingHorizon $true -ForwardRequestsToDelegates $false -MaximumConflictInstances 100 -MaximumDurationInMinutes
0 -OrganizerInfo $true -ProcessExternalMeetingMessages $true -RemoveForwardedMeetingNotifications $true -RemoveOldMeetingMessages $true -RemovePrivateProperty $false -ScheduleOnlyDuringWorkHours $false -TentativePendingApproval $false -WhatIf
Look at those settings in technet article dd335046
good luck
JLH

How do I set all users to have complete permission access to all other users on a single Macbook?

How do I set all users to have complete permission access to all other users on a single Macbook? When one user uploads a picture from camera, the other user is told they don't have permission to view. Same with music.

Go to System preference> accouts>unlock>click+and add name of new user, Adrop dowm window will appear, new Account and set for Admi, fill in their name, to make things even more simple, use the same password for all,if it will allow it. Click ceate account. Click allow user to admin this computer.Then go to sys prefs, sharing and click all the things you want to let everyone use, If you use separeate paswords then each user can set their own preferences. All users can be set as as administrator, click allow access for all users. This will allow every one pretty much the same access.
OH yeah reart the computer sfter added a new user, and test the new login, if it's good coninue.

Setting up user directories

Similar Messages

Maybe you are looking for