Users Directories n GCC

hi everyone
i m new to sun solaris i dont know much about it
so i m using webadmin interface to configuring it
i have created some user accounts using smc before
and their default directories were in /export/home/
and wen i used webadmin to convert unixs users to samba users for the networking between windows and this machine
i have lost all the users default directories
i mean now wen i check /export/home/ there is nothing
i dont know where are they now
i think after converting unix users to samba users, directories path has changed
as i said i dont know much i cant find where r these directories now
and my system partition i mean root partition is almost full
i want to move data from here to some users directories
so plz help me to come out from this problem
and please tell me how to set path to get any software available for all users
i have sun solaris 10 and sungcc compiler is already there
and i log in using root account and my current shell is : /sbin/sh
# echo $SHELL
/sbin/sh
My path is : /usr/bin:/usr/ucb:/etc:.:/usr/openwin/bin:/usr/dt/bin
# echo $PATH
/usr/bin:/usr/ucb:/etc:.:/usr/openwin/bin:/usr/dt/bin
and wen i type gcc i got this msg
# gcc
gcc: not found
bcoz of this i ain't able to compile any software
cant run ./configure and make commands
plz tell me also how can i start working with this
thnx
anshul

I'ld modify /etc/default/login, uncomment the line beging with "PATH" and add "/usr/sfw/bin" to it.
7/M.

Similar Messages

Shared Services and cannot open User Directories

Hi
After install and configure Shared service i loged in as admin and when i click on "user Directories" it is not give me in list of user, its look like its hanged. Log is saying CSS.XML file is read only, i check the file properties but its not. I am using Hyperion 9.3.1, Java 5.11 and tomcat 5
here is the log
please help me for this.
2009-05-28 16:46:40,265 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2009-05-28 16:47:00,718 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /C:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2009-05-28 16:48:18,203 [http-58080-Processor8] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2009-05-28 16:48:18,203 [http-58080-Processor8] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2009-05-28 17:10:44,359 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2009-05-28 17:11:11,234 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /C:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2009-05-28 17:15:48,921 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2009-05-28 17:15:48,921 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2009-05-28 17:26:14,343 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2009-05-28 17:26:36,031 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /C:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2009-05-28 17:28:26,750 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2009-05-28 17:28:26,750 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2009-05-29 16:12:20,453 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2009-05-29 16:12:43,937 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /C:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2009-05-29 16:13:03,484 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2009-05-29 16:13:03,484 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.

CSS.XML file is not read only and not corrupt , here are the entries of the file
<?xml version="1.0" encoding="UTF-8" ?>
- 
- <css>
- <hub location="http://hypsr:58080">
<dirPort>58089</dirPort>
</hub>
- <spi>
- <provider>
- <native name="Native Directory">
<password>{CSS}4N6lVcgiE/dGr8rFdvQLcA==</password>
</native>
</provider>
</spi>
- <searchOrder>
<el>Native Directory</el>
</searchOrder>
- <token>
<timeout>480</timeout>
</token>
- <logger>
<priority>WARN</priority>
</logger>
- <delegatedUserManagement>
<enabled>false</enabled>
</delegatedUserManagement>
</css>

Shared Services and cannot open User Directories Tree

Hello,
I have an issue with Shared Services 931. My OpenLDAP and Shared Services will start fine. I am using TomCat as deployment of the service.
When i login as admin, i goto the User Directories and try to expand (click on the + sign) and it says loading. Then i checked the logs and i see this in there.
"Unable to get css.xml file or file maybe read only". I check the file css.xml and it is not read only. I have even configured using another Oracle Schema, but still no luck.
Has anyone seen this before ?
Thanks,
Azmat Bhatti

Hi,
Have you tried rebooting you shared services server to see if it removes the lock?
What happens if you start shared services as a foreground app instead of starting it as a Windows service? Do you get further info in terms of errors?
Seb

Setting up user directories

Since there is no mod_edir function in Linux, I plan to do the following:
Build OES Linux A.M.P. web server, amd use the "UserDir" directive so that
when users type
"http://example.com/~username/" they will get content out of the home
directory of the user "username"
For now, I will have both a web and users file system on the Linux server
because I still have some apps the depend on NetWare running on our main
server, the main users home directory will be on Netware and the user web
directory will be on the Linux box. So, from the login script, I currently
map the users home directory to H: "Netware-server\users:\home\username\";
and their web directory to W:
"Netware-server\users:\home\username\public_html" as both reside on the
Netware box. With all else being equal, the users web directory will now be
on the Linux box under OES-Linux-server\user:\username\public_html. Should
I use NSS or the Linux file system for the partitions that will hold the
user directories so that they can map to them? I am new to Linux just need
some guidance.
Thanks in advance for your help,
Darrell Eddy

Darrell,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

CSS.xml does not have info about my Configured External User directories??

Hello,
Can somebody help me. I do not see any mention of my external directories I have configured in Shared Services as I have reinstalled the Applicationn server Tomcat for 11.1.13.
Appreciate any help,
Thanks
Vince
Edited by: Vince456 on Oct 1, 2009 2:59 PM

Hi,
Not too sure what you mean.
Have you configured your external user directories via the user management console?
Can you see the node for your external directory?
Can you provide the steps you have followed?
Thanks,
Seb

Cannot access "Configure User Directories"

Hi Gurus
I am getting this error " you do not have enough credentials to...." when i click on "Configure User Directories" on user management console.
hyperion shared services ver 9.3.1.
Could you help!!
Thank You
Kumar

Hi
I found and reported this fault on my post here...
http://discussions.apple.com/message.jspa?threadID=1084956
the workaround solution I found is also listed in this post in the thread
http://discussions.apple.com/message.jspa?messageID=5145624#5145624
Could you advise if it also solves your problem for others doing search for solution for this issue.
PS

User Directories on a Non Startup Volume?

Is there a way to create or move the user directories to a non-startup volume?
What I am trying to do is to either partition my internal drive (or perhaps actually use a secondary drive) such that I have a smaller startup volume that holds ONLY my OS and applications, and then use a secondary partition or drive that holds ALL my data. There are several reasons why I would like to do this, which I won't get into at this point.
Is there a way to force the creation of the user directories onto another volume? Or is it possible to move the directories to another volume after creation and have the system look for them in the new location? I would think this should be possible because in a way OSX Server uses this scheme (over a network).

Shahin wrote:
Have you personally done this? Can you attest to its success?
No, but I have no reason to think that it wouldn't work. I just don't like partitions.
Also any comments regarding the reply above yours warning as to possible problems with this? This can obviously be disastrous if it doe snot work. Of course I will back up before proceeding with this, but I am more concerned about ongoing and strange problems that may occur over time.
Well, there is that
What you ask is certainly a non-standard configuration for MacOS X. However, it is also 100% valid. Apple wouldn't give you that option if they didn't intend to support it. I have no doubt you will run into odd problems where some 3rd party software (or the odd Apple installer) assumes your home directory is at /Users/whatever. It would definitely be a good idea to keep your old home directory around for a month or two.
Another option would be to just mount that other drive at /Users, after copying your home folder there, of course. You would have no problems with software because your home directory is still the default, just mounted differently. In the event of a hardware failure on either the startup or other volume, you could have some issues getting things right again. Apple does not provide any easy-to-use method for this. You have to hack around in your /etc/fstab file or maybe auto_master or auto_home. There is a little bit of black magic behind the automounter however.

How to "bless" user directories copied to new iMac?

The old "source" iMac wouldn't boot Target Disk Mode, so I put the new Intel iMac in Target Disk Mode, then used SuperDuper to copy the user directories from the old iMac G5 to the new Intel iMac.
How do I correctly set up the NetInfo Manager records for the ported user directories?
Many thanks, Steve

It may depend on the history of the accounts on that machine, but as of 10.4, if you create a new account the simple way (using "System Preferences" > "Accounts") and a folder exists in "/Users" with the same short name, an option will often be presented allowing that folder to be "adopted" by the new account
Some notes:
The process involves a 'chown -R username:username' equivalent, and the 'uid' of the folder contents will be changed to that of the new user (whose 'uid' will simply be the next available number), as opposed to the user's 'uid' being matched to the folder. So if you have some sort of complicated user:group setup for items within the user's folder, or are trying to maintain consistent 'uid' values for users across multiple machines for NFS or whatever, don't use this method.
Also, if a group already exists with the selected short name, you will not be allowed to create the account, with the message along the lines that the name isn't available.
A couple of the things you mentioned reflect how users were configured in 10.2 and earlier. There have been a few changes to the contents of user records in "NetInfo" since then so I think it would be better to let the system create the accounts rather than doing it yourself - unless there are reasons not to, like the ones mentioned above...

User directories hanging in shared services

Hi,
I am installing HSS 9.3.1 on a dev box with win sever 2003. It is a VM. It installs and deploys fine. I can login to HSS. However, when I click on the user directories it justs says loading and hangs. I successfully configured eas against the install of HSS and the admin user authenticates.
I looked at the logs and there is reference to css.xml file having an unknown source. I went to the link in the log file and it all looked fine. I uninstalled hss and eas, got rid of the registry enteries and reinstalled HSS. The same thing has happened.
I have installed 9.3.1 numerous times but never seen this. Both services (olap and HSS) are started and will restart.
Thanks,
Nathan

Hi John,
Ie8........ Not supported...... I assumed it would be 7. I didn't install the server and they obviously just put on ie8.
Forget I ever asked.
Nathan

Relocating user directories

I recently replaced the existing 160GB HDD in my MacBook (2008) to a 75)GB HDD and partitioned it into two- the frist 256GB partition for system and applicaation files and the second for user directories- Documents, Downloads, Pictures, Movies, etc....
How do I setup so that when I create or look for documents, pictures, Movies, etc, I am automatically directed to these directories which have now been moved into the second partition.
Thanks
Gautam

To do this, log into another administrative account and then go to the Users directory on your system, select your home folder, and then press Command-C to copy. Then go to the desired location on the second drive and press Shift-Option-Command-V to "paste exactly" and preserve all permissions and file structures. Authenticate if and when prompted.
When the folder is copied in its entirety, go to the Users & Groups system preferences and authenticate to make changes. Then right-click the target account and choose Advanced Options. In the panel that drops down, you should see an field for the home folder location along with a button that says "Choose." Click this button and selec the new home folder location.
After saving these settings, try logging into the account again, and it should use the new home folder location with all settings and files as they were.

How do I access User directories after a reinstall of Windows. I have the passwords but no way to access the directories.

I got a Windows wont start xc0000001. This means it cant be repaired (it fails). There are two drives set up as a RAID 1 pair.
Each has a small partition (defined as the X drive) that I was able to reinstall windows 7 on. This partition was originally used for the Windows reinstall files. There was sufficient space on the X drive to reinstall Windows 7.
However, the C: drive, where the installation was originally could not be repaired and so the small partition was used successfully.
Here's the problem. All the files that are in the "C:\Users\username" are not accessible in that it requires "Administrative privileges" which my new user account has. I have all
the passwords to the each user associated with those directories and all the sub-directories, but no way to input the passwords or username and passwords to access these files. How can I access these files/directories?
I want to copy them off the current drive (along with all the other directories like Program Files, etc.), reformat the drives (which show no errors in fdisk and other tests), reinstall Windows 7 again on C: and start to reuse the computer again.
I can access the drives thought the CMD Prompt if I insert the Windows Disk, I cannot
Bob G

If you do have administrator account or an account with admin privileges you can take ownership/assign ownership of the files folders
Learn How to Take or Assign
Ownership of Files and Folders
http://technet.microsoft.com/en-us/magazine/ff404240.aspx
File and Folder Permissions
http://technet.microsoft.com/en-us/library/bb727008.aspx
http://www.pcandtablet.com/windows-7-errors-and-crashes/119/i-cannot-delete-my-own-files-and-folders-it-says-either-some-program-is-using-it.html#post199
http://social.technet.microsoft.com/Forums/windows/en-US/55e8eb6d-1d82-42c9-a7b4-59b96e3648d4/windows-7-asks-admin-grants-when-trying-to-delete-a-firefox-bookmark-folder?forum=w7itprosecurity#0895c7e2-3ee9-4be2-9b4c-b7b573df85d0

Permissions of user directories get reset every time users log in

I have some 30 users and 7 groups defined in workgroup mgr of 10.6.6server on a macpro.
most users are members of 'standard'-group, some are in additional groups.
each user has its own private directory; the POSIX permissions are 700 for each dir.
now, every time a user logs into the server, its home directory permissions get reset to 755!
anybody seen this before? any hints?

hi, the latter. what i did was add another internal hd drive and move all the user dirs to the new drive. after that, i ended up reinstalling the os from scratch as it was acting funny...
so i basically created new users and pointed their home dir to the existing directories on my new drive...

Configuring MSAD user directories in System 11

All,
I've just installed System 11.1.1.2 in a test environment to get familiar with the produce. I manually configured the first provider with the Shared Services console and it works great.
My plan was to find the CSS.xml file and insert the remainder of my MSAD providers from my System 9 environment. I've run into a snag. I can find css.xml, but it doesn't list the provider I added. Are these providers stored someplace else in System 11?
Thanks for any information.
Keith

Hi,
I have to revisit this because I came across another problem with the css.xml file. I was trying to use the CSSImport utility to copy my production 9.3.1 shares services data into the System 11 shared services. It imported all of the native directory stuff just fine but it errored out on anything that had a MSAD provider associated with it (users and groups).
I couldn't figure out what was wrong so I though maybe I had the wrong format. I added a MSAD user to one of my native groups and did an export to compare the format. It didn't export the MSAD user. I can see the user in SS but the shared services output log complained that it couldn't find the provider associated with the user.
I though maybe it had something to do with the default ports changing for Shared Services in System 11 (58080 is now 28080). The example property files that come in the cssimportexport.zip still have 58080 so you need to change it to 28080 for it to find shared services.
I also noticed that the property files have this entry referencing the css.xml file:
importexport.css=file:/d:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml
I went back to my version 9.3.1 css.xml file and copied the MSAD providers to the version 11 css.xml file and the import worked. Maybe there is a new entry needed in the property file to reference what is stored in the Oracle repository?
Any other ideas why I needed to add this manually.
Keith

Aborted system re-install, user directories vanished

My PowerBook G4 froze on me, so I rebooted using the power button. After rebooting, the finder wouldn't allow me to open any folders, etc., although I could open applications on my dock. After rebooting again and again with no success, I decided to reinstall. But my computer came with Panther and an upgrade disk to Tiger. So, I started reinstalling Panter and got an error. Now I have no system, and when I access my PowerBook with firewire, the User folders (that is my personal folders, which is everything since I'm the only user) were missing. So, I purchased DiskWarrior 4.0 and tried rebuilding the directory structure, but the User folders still are gone. Now I have about 40 GB of personal files (my old dissertation, years of family photos, etc.) gone. Any suggestions? (asides from kicking myself for not backing up these things.)

Whoo boy Dave... reinstalling Panther over Tiger likely erased a lot.
If that shouldn't work, your best bet for recovering your data is Data Rescue II...
http://www.prosofteng.com/products/data_rescue.php
This last one would require another HD with plenty of space to recover to, or if you have another Mac, put this one in FireWire target disk mode...
http://docs.info.apple.com/article.html?artnum=58583
And see if you can recover with Data Rescue II, but the more you use that drive now, the more info will be gone.

Copy To Choose Folder... stuck in user directories

I feel like this is kind of a silly question, but I've been using PC's for a long time and I really cant figure out why i'm stuck here. But when I right click and select Copy to, the default folder location is Desktop/username. There is no way to browse to anywhere else on my computer. I cannot go up a directory to My Computer and there is no explorer style side navigation bar. It used to work and my workflow is suffering. How can I reset the default location? Thanks.

The list for Bridge Copy To and Move To includes folders recently accessed by Bridge. While not answering how to change default, one way to make your copy work would be to get your destination folder in the Bridge recent folder list: Navigate Bridge to the folder you wish to copy files into, then return to your copy from folder. Destination folder should now appear in Copy To list.

Users Directories n GCC

Similar Messages

Maybe you are looking for