Setting values to properties on load

Hi,
I have a big Trouble on Data Populating to the components on page loading like,
Have page1 and page2.Based on ID passed from page1,query should execute and results should set to the form on page2 through Backing Bean.
What doing is..
using setActionListener passing ID from page1 and setting to method in page2 as argument which gets results based on ID and sets to component properties, here the problem is..
Before page2 loads method called first from setActionListener where we cannot set the values to properties before loading.
How can we set values to components in backing bean only on load based on ID from other page.
And one more issue is, if we make any code in setter property it get executes every time,
what is the correct procedure to execute the method only on loading.
Does there any procedure to make method to excecute only on load.
Please suggest me, how can i overcome this issues,these were become major issue for the Development.
Thanks,
Bandaru.

hi,
we tried to achieve the same thing.. But its not possible to set the values to individual segments of a KFF..
Thanks,
raghav.

Similar Messages

Set value for subreport on load or current-to prevent dispalying "#Error"

I've got a Work Orders Report which I use to Print Production Copies for Operators. This report uses a subreport to pass information about Purchase Orders to the Report and then I use "=[Reports]![WORK ORDERS REPORT]![AssociaterQuery subreport]![SIZE]"
to display the information in text boxes on my main report. The problem is that sometimes customers supply their own raw material and there is no Purchase Order record, this causes "#Error" to be displayed in my text boxes, which can be confusing.
I've got a "Customer Supplied Checkbox" to denote that the customer is supplying their own material. So I'm trying to use an OnLoad event to set these values to an empty string, but I can't quite get it correct. This is what I've
been trying so far, where am I going wrong?
js
Private Sub Report_Load()
If Me.CustSupplied Is true Then
[Reports]![WORK ORDERS REPORT]![AssociaterQuery subreport]![Size] = ""
End If
End Sub

I've got a Work Orders Report which I use to Print Production Copies for Operators. This report uses a subreport to pass information about Purchase Orders to the Report and then I use "=[Reports]![WORK ORDERS REPORT]![AssociaterQuery subreport]![SIZE]"
to display the information in text boxes on my main report. The problem is that sometimes customers supply their own raw material and there is no Purchase Order record, this causes "#Error" to be displayed in my text boxes, which can be confusing.
I've got a "Customer Supplied Checkbox" to denote that the customer is supplying their own material. So I'm trying to use an OnLoad event to set these values to an empty string, but I can't quite get it correct. This is what I've
been trying so far, where am I going wrong?
js
Private Sub Report_Load()
If Me.CustSupplied Is true Then
[Reports]![WORK ORDERS REPORT]![AssociaterQuery subreport]![Size] = ""
End If
End Sub
Hi jswan,
If you say: "=[Reports]![WORK ORDERS REPORT]![AssociaterQuery subreport]![SIZE]" to display the information in text boxes on my main report
then the text box GETS the information form the control SIZE.
In your case you can better use:
Private Sub Report_Load()
If Me.CustSupplied Is true Then
<text box> = ""
Else
<text box> = [Reports]![WORK ORDERS REPORT]![AssociaterQuery subreport]![Size]
End If
End Sub
Substitute for <text box> the real name of the text box.
Imb.

Dynamic action with set value on date field

Hi,
I'm using APEX 4.02
I'm trying to calculate the age based on the date of birth dynamically on a form. I'm trying to do this with a (advanced)dynamic action with set value.
I'm able to get this kind of action working based on a number field etc, but NEVER on a date field.
I've read all posts on this subject but so far no solution. Even if I try to simply copy the value over to another date field or typecast it to a string ( to_char function ) it does not work. So for me the problem seems to be in the source field being a date field.
I've tried using the source value as is in a select statement :
select :P33_GEBOORTEDATUM from dual;
and also type casted based on the date format :
select TO_DATE(:P33_GEBOORTEDATUM,'DD-MON-YYYY') from dual
but still no luck.
On the same form I don't have any issues as long as the calculation is based on number fields, but as soon as I start using dates all goes wrong.
Any suggestions would be greatly appreciated. If you need any extra info just let me know.
Cheers
Bas
b.t.w My application default date format is DD-MON-YYYY, maybe this has something to do with the issue .... ?
Edited by: user3338841 on 3-apr-2011 7:33

Hi,
Create a dynamic action named "set age" with following values.
Event: Change
Selection Type: Item(s)
Item(s): P1_DATE_OF_BIRTH
Action: Set value
Fire on page load: TRUE
Set Type: PL/SQL Expression
PL/SQL Expression: ROUND( (SYSDATE - :P1_DATE_OF_BIRTH)/365.24,0)
Page items to submit: P1_DATE_OF_BIRTH
Selection Type: Item(s)
Item(s): P1_AGE
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

Tables - How to get cell value? How to get/set UI controls properties?

Hi,
I want to get a the cell's value of row x and col y.
The table is not bounded so I cannot use:
Table1.Items(key).DataSourceRow.DataItem("ColID")
Another question:
How to I set the properties of a table column which contains UI elemtents that I create dynamically?
for exmpale:
c1 is a TableBodyCell
tr is a tableRow
c1 = New TableBodyCell(Table1, tr, 0)
c1.TableCellContent = New InputField
tr.Cells.Add(c1)
How do I set/get the properties of the InputField?
Thanks,
Omri

Thanks Reshef,
My Table's scheme:
Column 0 - TextView
Column 1 - InputField
I was able to get a cell value of type TextView by using what you suggested:
Write(CType(Table1.Items(0).Cells(0).TableCellContent,TextView).Text)
However, when I tried to do the exact thing to InputField I didn't get any value (nor error)
Write(CType(Table1.Items(0).Cells(1).TableCellContent, InputField).Value)
I fill the Input Field and then push "Execute" button which supposed to write the value.
About my second question:
By using the cast (CType) I can access the properties I need (like Width) so it kind of solve my problem.
for example:
CType(Table1.Items(1).Cells(1).TableCellContent, InputField).Width = "15px"

Setting Acroform field properties (not values) by importing FDF?

Am I crazy or is there a way to set "hard-to-set-field-properties-unless-you-use-javascript" by importing an FDF document. Currently, when we are programatically adding fields to an AcroForm (some of our customers still require AcroForms) we can't set certain field properties because the API doesn't expose those properties for some reason. I think I remember reading that you can import an FDF file to set field properties (not field values). Is this true?
Thanks

This is a list of some of the properties that a fellow developer gave me that had to be set by executing javascript within Acrobat:
fillColor
borderStyle
strokeColor
lineWidth
doNotScroll
We aren't setting these properties during the end-user experience. We just need to do it programmatically during the design phase.
I was wondering if we could import an FDF to set these properties. Heck, even better it would be great if we could import an FDF to create and position fields and set all of there properties. Is any of this possible?

SDK: set value to "Item Properties" option when item creation.

I need a massive update into item master data.I need to set the Item Properties (at table: OITG) into each item.
In the DI API ,Can I do it ?

Hi,
You can use the Item´s Properties property. Somekind like:
oItem.Properties(i)= tYES
Regards,
Ibai Peñ

How to show default values for properties managed by UUP

Is there a way to load default values of properties from an external source while
associating a user with property sets managed by UUP ?
We are trying to write a Custom User Profile using UUP so that some of the User
Profile attributes can be stored using an existing Oracle database schema. But
the values for some of these properties(Profile property set attributes) has to
come from another table which already exist. So the idea is that when a new user
is being associated with the Custom property set using Portal Admin Tool, the
available values for an individual property has to be pulled from from a database
table. Like when selecting a user's home city he can select the name of all cities
already existing in a database table.
I couldn't find a way to do this using the EntityPropertyManager. Anyone has
any idea how to do this?
Thomas.

Hi Thomas,
Yes, the UUP framework is flexible enough for you to easily load default
values of properties from some external source. You can do this if you
deploy your own UserProfileManager that uses a custom PropertySetManager.
When UserProfileManager.getProperty() is called, it looks for the property
for that user and then for the user's implicit and explicit successors
(implicit = persisted for that property set, explicit = given as an argument
in the method call)...if it doesn't find the property (gets null) then it
does this:
PropertySet set = getPropertySetManager().getPropertySet(
getPropertySetType(), propertySet );
if ( set != null )
PropertyDefinition def =
set.getPropertyDefinition( propertyName );
if ( def != null )
result = def.getDefaultValue();
Check out the javadoc for the classes I have mentioned and check out the
ejb-jar.xml depoyment descriptor for the UserProfileManager in usermgmt.jar:

<ejb-ref>
<ejb-ref-name>ejb/PropertySetManager</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<home>com.bea.p13n.property.PropertySetManagerHome</home>
<remote>com.bea.p13n.property.PropertySetManager</remote>
</ejb-ref>
There are two options for deploying a UUP: 1) use the default
UserProfileManager deployment with your custom EntityPropertyManager
deployment, or 2) use your custom deployment of the UserProfileManager with
your custom EPM deployment.
In almost all cases, option 1) is done. However, in your case, you need to
modify the behavior of the UserProfileManager so you must redeploy a
custom-configured version. This means you will have to register a new
ProfileType for your users with the DD for the UserManager EJB (because your
special users don't use the default UserProfileManager) like this:
<ejb-ref>
<ejb-ref-name>ejb/ProfileType/WLCS_Customer</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<home>com.bea.commerce.ebusiness.customer.CustomerProfileManagerHome</home>
<remote>com.bea.commerce.ebusiness.customer.CustomerProfileManager</remote>
</ejb-ref>
If you didn't need to retrieve the default values from your own data source,
here is how you could get the default values using the default deployment of
the UserProfileManager:
* use the EBCC to create a property set (a.k.a "user profile") that matches
your UUP property set name. Create the properties in this pset and the
default values. When the UserProfileManager.getProperty() call fails to
find the property value in your UUP (gets null) it will use the default
PropertySetManager to get metadata about that property from the Portal
schema (which you just set up using the EBCC) and it will return the default
value that you set in the EBCC.
I recommend you study the 2 options for deploying a UUP, especially the
option for deploying a custom version of the UserProfileManager by checking
out the sample UUP on dev2dev.bea.com and by looking at the Portal 4.0 docs.
I don't know if the 7.0 docs have as much detail about this. Also, when you
sit down to implement your custom PropertySetManager you may have to contact
support for some of the details. For instance, how to instantiate a
PropertySet.
Ture Hoefner
BEA Systems, Inc.
www.bea.com
"Thomas KJ" <[email protected]> wrote in message
news:[email protected]...
>
Is there a way to load default values of properties from an externalsource while
associating a user with property sets managed by UUP ?
We are trying to write a Custom User Profile using UUP so that some of theUser
Profile attributes can be stored using an existing Oracle database schema.But
the values for some of these properties(Profile property set attributes)has to
come from another table which already exist. So the idea is that when anew user
is being associated with the Custom property set using Portal Admin Tool,the
available values for an individual property has to be pulled from from adatabase
table. Like when selecting a user's home city he can select the name ofall cities
already existing in a database table.
I couldn't find a way to do this using the EntityPropertyManager. Anyonehas
any idea how to do this?
Thomas.

SQL Query (updateable report) Region - Conditionally Hide and Set Values

SQL Query (updateable report) Region - Conditionally Hide and Set Values
Outline of requirement :-
Master / Detail page with Detail updated on same page using SQL Query (updateable report).
The detail region has the following source
SELECT item_id,
       contract_id,
       CASE WHEN hardware_id IS NOT NULL THEN
               'HA'
            WHEN backup_dev_id IS NOT NULL THEN
               'BD'
            WHEN hardware_os_id IS NOT NULL THEN
               'HS'
       END item_type,
       hardware_id,
       backup_dev_id,
       hardware_os_id
FROM   "#OWNER#".support_items
WHERE contract_id = :P26_CONTRACT_IDThe table support_items implements arced relationships and has the following columns
CREATE TABLE SUPPORT_ITEMS
ITEM_ID         NUMBER                        NOT NULL,
CONTRACT_ID     NUMBER                        NOT NULL,
HARDWARE_ID     NUMBER,
BACKUP_DEV_ID   NUMBER,
HARDWARE_OS_ID NUMBER
)A check type constaint on support_items ensures that only one of the fk's is present.
      (    hardware_id    IS NOT NULL
       AND backup_dev_id IS NULL
       AND hardware_os_id IS NULL
OR    (    hardware_id    IS NULL
       AND backup_dev_id IS NOT NULL
       AND hardware_os_id IS NULL
OR    (    hardware_id    IS NULL
       AND backup_dev_id IS NULL
       AND hardware_os_id IS NOT NULL
      )    Hardware_Id is a FK to Hardware_Assets
Backup_dev_id is a FK to Backup_Devices
Hardware_os_id is a FK to Hardware_op_systems
The Tabular Form Element based on item_type column of SQL query is Displayed As Select List (based on LOV) referencing a named list of values which have the following properties
Display Value     Return Value
Hardware Asset    HA
Backup Device     BD
Computer System   HSThe Tabular Form Elements for the report attributes for hardware_id, backup_dev_id and hardware_os_id are all Displayed As Select List (Based on LOV).
What I want to do is only display the Select List for the FK depending on the value of the Select List on Item Type, e.g.
Item_Type is 'HA' then display Select List for hardware_id, do not display and set to NULL the Select Lists for backup_dev_id and hardware_os_id.
Item_Type is 'BB' then display Select List for backup_dev_id, do not display and set to NULL the Select Lists for hardware_id and hardware_os_id.
Item_Type is 'HS' then display Select List for hardware_os_id, do not display and set to NULL the Select Lists backup_dev_id and hardware_id.
There are properties on elements to conditionally display it but how do we reference the values of the SQL query Updateable region? they are not given a page item name?
Also on the Tabular For Elements there is an Edit tick against a report item - however when you go to the Column Attributes there is not a property with which you can control the Edit setting.
What's the best way of implementing this requirement in APEX 3.1?
Thanks.

>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user13515136".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I have a multi-row region that displays values and allows entries in a number of fields.Provide exact details of how this has been implemented. (An example on apex.oracle.com is always a good way to do this.)
I should like the fields to be conditional in that they do not permit entry, but still display, if certain conditions apply (e.g. older rows greyed out). Can this be done? Almost anything can be done, often in multiple ways. Which are appropriate may be dependent on a particular implementation, the skills available to implement it, and the effort you're willing to expend on it. Hence it's necessary to provide full details of what you've done so far...

The value returned from the load function is not of type numeric errors after migration to Coldfusion 11

I am currently testing our website with CF11. It is currently working with CF8 however after migrating it to a new server running CF11 I have encountered the following error.
The value returned from the load function is not of type numeric.
The error occurred in
D:/Applications/CFusion/CustomTags/nec/com/objects/address.cfc: line 263
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/contact.cfc: line 331
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 510
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 1675
Called from D:/website/NECPhase2/action.validate.cfm: line 54
261 : <cfif isNumeric(get.idCountry)>
262 : <cfset rc = this.objCountry.setID(get.idCountry)>
263 : <cfset rc = this.objCountry.load()>
264 : </cfif>
265 : <cfset this.sPostcode = get.sPostcode>
Have there been any changes between CF8 and CF11 that could cause this error?
Does anyone have ideas?

This is the code in file object file country.cfc (nec.com.objects.country):
<cfcomponent displayname="Country object" hint="This is a Country object, it allows you to access and set values in the Country.">

<cfset this.objFunctions = CreateObject( 'component', 'nec.com.system.functions' )>
<cfscript>
this.idCountryID = 0;
this.sCountryName = "";
this.sISOCode = "";
this.sDHLCode = "";
this.iErrorID = "";
</cfscript>


<cffunction name="getID" displayname="Get ID" returntype="numeric" output="false" hint="This returns the ID of the current item.">
<cfreturn this.idCountryID>
</cffunction>
<cffunction name="getsCountryName" displayname="Get sCountryName" returntype="string" output="false" hint="This gets the sCountryName value of this item.">
<cfreturn this.sCountryName>
</cffunction>
<cffunction name="getsISOCode" displayname="Get sISOCode" returntype="string" output="false" hint="This gets the sISOCode value of this item.">
<cfreturn this.sISOCode>
</cffunction>
<cffunction name="getsDHLCode" displayname="Get sDHLCode" returntype="string" output="false" hint="This gets the sDHLCode value of this item.">
<cfreturn this.sDHLCode>
</cffunction>
<cffunction name="iError" displayname="Get iError" returntype="numeric" output="false" hint="This returns the iError of the current item.">
<cfreturn this.iError>
</cffunction>

<cffunction name="setID" displayname="Set ID" returntype="boolean" output="false" hint="This sets the ID value of this item.">
<cfargument name="idCountryID" required="true" type="numeric" displayname="ID" hint="The ID to use.">
<cfset this.idCountryID = arguments.idCountryID>
<cfreturn true>
</cffunction>
<cffunction name="setsCountryName" displayname="Set sCountryName" returntype="boolean" output="false" hint="This sets the sCountryName value of this item.">
<cfargument name="sCountryName" required="true" type="string" displayname="sCountryName" hint="The sCountryName to use.">
<cfset this.sCountryName = arguments.sCountryName>
<cfreturn true>
</cffunction>
<cffunction name="setsISOCode" displayname="Set sISOCode" returntype="boolean" output="false" hint="This sets the sISOCode value of this item.">
<cfargument name="sISOCode" required="true" type="string" displayname="sISOCode" hint="The sISOCode to use.">
<cfset this.sISOCode = arguments.sISOCode>
<cfreturn true>
</cffunction>
<cffunction name="setsDHLCode" displayname="Set sDHLCode" returntype="boolean" output="false" hint="This sets the sDHLCode value of this item.">
<cfargument name="sDHLCode" required="true" type="string" displayname="sDHLCode" hint="The sDHLCode to use.">
<cfset this.sDHLCode = arguments.sDHLCode>
<cfreturn true>
</cffunction>

<cffunction name="clear" displayname="Clear items Details" returntype="boolean" output="false" hint="Clears out all of the items details.">
<cfscript>
   this.sCountryName = "";
   this.sISOCode = "";
   this.sDHLCode = "";
   this.iErrorID = "";
</cfscript>
<cfreturn true>
</cffunction>


<cffunction name="load" displayname="Load items details" returntype="numeric" output="false" hint="This loads in all the information about an item.">
<cfset rc = this.clear()>

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("load: checkID: '#this.idCountryID#' #cfcatch.detail#");
    </cfscript>
    <cfset this.iErrorID = iErrorID>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif not checkID.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     if(isDefined("session.afr")){
      whichOne = "#session.afr.getsAFRNumber()#";
     } else {
      whichOne = "";
     iErrorID = objError.addError("A Country with that id doesn't exists.[#this.idCountryID#][#whichOne#]");
    </cfscript>
   <cfset this.iErrorID = iErrorID>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="get" datasource="#sDatasource#">
    SELECT idCountryID, RTRIM(sCountryName) as sCountryName, RTRIM(sISOCode) as sISOCode, RTRIM(sDHLCode) as sDHLCode
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("load: get: #cfcatch.detail#");
    </cfscript>
    <cfset this.iErrorID = iErrorID>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfset this.idCountryID = get.idCountryID>
<cfset this.sCountryName = get.sCountryName>
<cfset this.sISOCode = get.sISOCode>
<cfset this.sDHLCode = get.sDHLCode>
<cfset this.iErrorID = "">
<cfreturn true>
</cffunction>

<cffunction name="save" displayname="Save items Details" returntype="numeric" output="false" hint="Saves (to some source) the current details for the ID of the item.">

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("save: checkID: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>

<cfif not checkID.recordCount>
   <cfreturn this.add()>
<cfelse>
   <cfreturn this.update()>
</cfif>
</cffunction>

<cffunction name="add" displayname="Add Country" returntype="numeric" output="false" hint="This adds a Country.">

<cftry>
   <cfquery name="checkUnique" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
    OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#'
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("add: checkUnique: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkUnique.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("A Country with that name or ISO code already exists. idCountryID=#checkUnique.idCountryID#");
    </cfscript>
   <cfreturn iErrorID>
</cfif>
<cftry>
   <cfquery name="add" datasource="#sDatasource#">
    SET nocount on
    INSERT INTO tblCountry(sCountryName, sISOCode, sDHLCode)
    VALUES('#this.objFunctions.scrubText(this.sCountryName)#','#this.objFunctions.scrubText(t his.sISOCode)#','#this.objFunctions.scrubText(this.sDHLCode)#')
    SELECT @@identity as autoID
    SET nocount off
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("add: add: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn add.autoID>
</cffunction>

<cffunction name="update" displayname="Update Country" returntype="numeric" output="false" hint="This updates a Country record.">

<cftry>
   <cfquery name="checkUnique" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE (sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
    OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#')
    AND idCountryID <> #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("update: checkUnique: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkUnique.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("Another Country with that name already exists. idCountryID=#checkUnique.idCountryID#");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="update" datasource="#sDatasource#">
    UPDATE tblCountry
    SET sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#',
    sISOCode = '#this.objFunctions.scrubText(this.sISOCode)#',
    sDHLCode = '#this.objFunctions.scrubText(this.sDHLCode)#'
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("update: update: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>

<cffunction name="delete" displayname="Delete Country" returntype="numeric" output="false" hint="This deletes a Country record.">

<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>

<cftry>
   <cfquery name="checkID" datasource="#sDatasource#">
    SELECT idCountryID
    FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: checkID: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif not checkID.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("A Country with that id doesn't exists, delete failed.");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="checkDependancies" datasource="#sDatasource#">
    SELECT idCountry
    FROM tblAddress
    WHERE idCountry = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: checkDependancies: idCountry: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfif checkDependancies.recordCount>
   <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("That Country is being used by an address, delete failed.");
    </cfscript>
   <cfreturn iErrorID>
</cfif>

<cftry>
   <cfquery name="delete" datasource="#sDatasource#">
    DELETE FROM tblCountry
    WHERE idCountryID = #this.idCountryID#
   </cfquery>
   <cfcatch>
    <cfscript>
     objError = CreateObject("component","nec.com.system.errors");
     iErrorID = objError.addError("delete: delete: #cfcatch.detail#");
    </cfscript>
    <cfreturn iErrorID>
   </cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>
</cfcomponent>

How to set up display properties for a crosstab is CSS?

I am woundring how to setup css class and code like in this tutorial.
myalerting.css ?
Set up display properties for a crosstab: Design Studio 1.2 - YouTube.
Design Studio 1.2: Set up display properties for a crosstab
if you have sample file please share I am sure other can be befits from as well.
I would like to use color display on numbers or icons in seperate column if the value in certain range or a value is below or avove business needs.
Thanks.

Kevin,
I could not get this to work on my installation; perhaps you can review and "run with it" or someone better with CSS can assist.
The gist of it is there is a class .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background to define the status symbol for the alerts
Based on your Exceptions in the BEx query, Good 1 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
Good 2 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
etc... Bad 3 (red symbol) is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9Background
I tried the following custom CSS on the crosstab, note using IE (which now we can no longer use until Microsoft patches)
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlternating{
background-color:#F9F9F9 !important;
myAlerting.sapzencrosstab-DataCellDefault{
background-color:#FFFFFF !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_1.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert2Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_2.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
color:rgba(0,0,0,0.0);
background-image:url('green.png');
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9StatusSymbol
color:rgba(0,0,0,0.0);
background-image: url('aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_9.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
I didn't want to hold you up and for sure I hope there is someone in the community who could help. I'll try again when we can use IE

ALC-DSC-000-000 on a "Set Value" activity

I have in my form some hidden fields I want to set in the process, before user assignement. For this, I use the Set Value activity.
But when I tried to set a field of my form with a value, I got this error:
Internal error.: ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.
     at com.adobe.idp.dsc.util.CoercionUtil.toDOMDocument(CoercionUtil.java:683)
     at com.adobe.idp.dsc.util.CoercionUtil.toDOMDocument(CoercionUtil.java:688)
     at com.adobe.idp.dsc.util.CoercionUtil.toType(CoercionUtil.java:974)
     at com.adobe.workflow.datatype.CoercionUtil.toType(CoercionUtil.java:168)
     at com.adobe.workflow.datatype.runtime.impl.pojo.POJODataTypeNode.getBoundValue(POJODataTypeNode.java:71)
     at com.adobe.workflow.datatype.runtime.impl.xml.XMLDataTypeNode.replaceContent(XMLDataTypeNode.java:267)
     at com.adobe.workflow.dom.InstanceElement.replaceContent(InstanceElement.java:241)
     at com.adobe.workflow.pat.service.PATExecutionContextImpl.setProcessDataValue(PATExecutionContextImpl.java:806)
     at com.adobe.workflow.pat.service.PATExecutionContextImpl.setProcessDataWithExpression(PATExecutionContextImpl.java:374)
     at com.adobe.idp.workflow.dsc.service.SetValueService.execute(SetValueService.java:54)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:618)
     at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke(DefaultPOJOInvokerImpl.java:118)
     at com.adobe.idp.workflow.dsc.invoker.WorkflowDSCInvoker.invoke(WorkflowDSCInvoker.java:153)
     at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept(InvocationInterceptor.java:140)
     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptorChainImpl.java:60)
     at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$1.doInTransaction(TransactionInterceptor.java:74)
     at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute(EjbTransactionCMTAdapterBean.java:342)
     at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doSupports(EjbTransactionCMTAdapterBean.java:212)
     at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionCMTAdapter_caf58c4f.doSupports(Unknown Source)
     at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvider.java:104)
     at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInterceptor.java:72)
     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptorChainImpl.java:60)
     at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStrategyInterceptor.java:55)
     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptorChainImpl.java:60)
     at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateInterceptor.java:37)
     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptorChainImpl.java:60)
     at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterceptor.java:132)
     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptorChainImpl.java:60)
     at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
     at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptorChainImpl.java:60)
     at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:115)
     at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:118)
     at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage(AbstractMessageReceiver.java:91)
     at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend(VMMessageDispatcher.java:215)
     at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispatcher.java:57)
     at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)
     at com.adobe.workflow.engine.PEUtil.invokeAction(PEUtil.java:724)
     at com.adobe.workflow.engine.SynchronousBranch.handleInvokeAction(SynchronousBranch.java:465)
     at com.adobe.workflow.engine.SynchronousBranch.execute(SynchronousBranch.java:862)
     at com.adobe.workflow.engine.ProcessEngineBMTBean.continueBranchAtAction(ProcessEngineBMTBean.java:2773)
     at com.adobe.workflow.engine.ProcessEngineBMTBean.asyncInvokeProcessCommand(ProcessEngineBMTBean.java:704)
     at com.adobe.workflow.engine.EJSLocalStatelessadobe_ProcessEngineBMTEJB_7d3cbd67.asyncInvokeProcessCommand(Unknown Source)
     at com.adobe.workflow.engine.ProcessCommandControllerBean.doOnMessage(ProcessCommandControllerBean.java:156)
     at com.adobe.workflow.engine.ProcessCommandControllerBean.onMessage(ProcessCommandControllerBean.java:99)
     at com.ibm.ejs.container.MessageEndpointHandler.invokeMdbMethod(MessageEndpointHandler.java:1014)
     at com.ibm.ejs.container.MessageEndpointHandler.invoke(MessageEndpointHandler.java:747)
     at $Proxy0.onMessage(Unknown Source)
     at com.ibm.ws.sib.api.jmsra.impl.JmsJcaEndpointInvokerImpl.invokeEndpoint(JmsJcaEndpointInvokerImpl.java:201)
     at com.ibm.ws.sib.ra.inbound.impl.SibRaDispatcher.dispatch(SibRaDispatcher.java:768)
     at com.ibm.ws.sib.ra.inbound.impl.SibRaSingleProcessListener$SibRaWork.run(SibRaSingleProcessListener.java:584)
     at com.ibm.ejs.j2c.work.WorkProxy.run(WorkProxy.java:419)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1473)
Caused by: ALC-DSC-119-000: com.adobe.idp.dsc.util.InvalidCoercionException: Cannot coerce object: [B@10e410e4 of type: [B to type: interface org.w3c.dom.Document
     at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
     at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
     at com.adobe.idp.dsc.util.DOMUtil.parseDocumentFromString(DOMUtil.java:167)
     at com.adobe.idp.dsc.util.DOMUtil.parseDocumentFromString(DOMUtil.java:129)
     at com.adobe.idp.dsc.util.DOMUtil.parseDocumentFromStream(DOMUtil.java:235)
     at com.adobe.idp.dsc.util.CoercionUtil.toDOMDocument(CoercionUtil.java:670)
     ... 54 more
It seems to be an xml parsing problem. Maybe a mistake in the xml schema of my form? For the moment, I don't see any mistake in my schema.
Any idea?

Here is a screenshort of the part of my workflow:
In the mappings of the "Set Value" activity, I have one line with those properties:
Location: /process_data/bonusValidationForm/object/data/xdp/datasets/data/BonusValidationForm/buMan agerID
Expression: /process_data/currentUser/object/@userId
Where:
bonusValidationForm is a process variable of my workflow that point my xdp form
buManagerID is the textfield I want to set
currentUser is a process variable (type User) that was well setted by the task Find BU Manager

Set value to system matrix (38) cell

Hello,
Thanks for your reply.
I need to set value for some UDF on a system matrix (38). Crurrently ,I use following code:
public void SetValue(string columnUniqueId, int matrixRowIndex, string value);
(I'm using the coresuite framwork)
The coresponding way in SDK would be:
oMatrix.Columns.Item("columnUniqueId").Cells.Item("matrixRowIndex").Specific.value = "value"
This works but when I have more than 10 UDF to fill together, the performance is bad. It takes nearly 3-4 seconds to load one item(row).
Is there any fast way to set the value? Or is there any other suggestion how to do it?

No, the problem is not by loading of UDFs by a existing document.
But when you create a new document and you add a new postion to the document by choosing an item. Then our AddOn copies the UDF values from the item master data into the corresponding UDFs in the postion. At this moment I have to write them manually.
The best would be when the UDFs in the Item Master Data would be autiomatically created also in the postion of documents. Because in this way they would be automatically loaded by SBO itself.
I think SBO has a mistake in its design by here.

Running SSIS Package from SQL Job - with Set Values, a string containing";"

Can anybody help with this problem please?
I’m using “set value” in SQL agent to pass in an email address to my SSIS package, if I put in a value of:
[email protected]
It works fine, but if I attempt to input multiple email addresses it fails
[email protected];[email protected]
It doesn’t appear to like the “;”.
Any ideas anyone???
BoroFC

Hi Jamie, many thanks for the response.
If I look at my command line table when Email = [email protected], it looks like:
/SET "\package.Variables[EmailAddress].Value";"[email protected]" /REPORTING E
If I change the value to “[email protected];[email protected]”, it looks like:
/SET "\package.Variables[EmailAddress].Value";"\""" [email protected];"" [email protected] ""\"" /REPORTING E
But the weird thing is, if I close the job properties window and re-open it again, I lose this line from my set values screen all together!!!
Help ???
BoroFC

Dynamic Form in Tabular Form i.e SET VALUE

Hi,
I have an tabular form ,
In which two column are there i.e username and department
Just I wnt to know can dynamic action i.e SET VALUE CAN BE USED IN TABULAR FORM.
AS I CHANGE THE USERNAME THERE PERSPECTIVE DEPARTMENT SHOULD CHANGE.
can anyone help.

Hello Trent,
I too, am attempting to set the value of an item when another item is changed.
I need to capture the APP_USER changing the row for each row changed in the tabular form when submitted.
My table is in a remote database that is not allowed to have APEX loaded directly in the instance (or db link TO the APEX instance).
Can’t get the APP_USER making the change at this level, as the APEX code is not there.
The instance that hosts the APEX installation accesses the table via a view through a db link.
Can’t use a trigger on the view to set the APP_USER using APEX functionality.
Not desirable to re-invent the IUD wheel using instead-of triggers.
The example you posted on http://apex.oracle.com/pls/apex/f?p=45448:11 is exactly what I need (even though your example sets the value on Lose Focus and I Set value on Change).
I am attempting to implement the dynamic action for the item using your javascript, and am almost there....but not quite. The dynamic action is updating the target item in ALL the rows in the tabular form, not just the one that is being changed.
This, I am sure, is due to my inexperience with Dynamic Actions, jquery syntax, and the javascript API’s for APEX. I believe I know what the issue IS, I’m just not sure how to work around it.
Please note: I attempted to download your example at the above website (turning off popup blockers), but had no success (I got the thank-you for downloading message, but have no clue what was downloaded to where). I was hoping to compare your form Dynamic action with mine to see where I went wrong.
If you could please, review the following and:
1) let me know what might be different from your working example?
2) provide info on how to get your working form downloaded (such a tease to have the download link there and not get it to work ;0} ) , please?
The following shows the html from view source for a row in my tabular form. This will help you get an idea of the items. The actual number of rows in the form is about 50.
<table cellpadding="0" border="0" cellspacing="0" summary="" class="report-standard">
<tr class="highlight-row">
<td headers="CHECK$01" class="data">
<label for="f01_0002" class="hideMe508">CHECK$01</label>
<input type="checkbox" name="f01" value="2" class="row-selector" id="f01_0002" />
</td>
<td headers="JOBNO_DISPLAY" class="data">X111Y2222</td>
<td align="center" headers="DEPR" class="data">
<label for="f03_0002" class="hideMe508">DEPR</label>
<input type="checkbox" name="f03_NOSUBMIT" value="1" id="f03_0002_01"
onClick="if (this.checked) {apex.jQuery('#f03_0002').val('1');}
else {apex.jQuery('#f03_0002').val('');}" />
<input type="hidden" name="f03" value="" id="f03_0002" /></span>
</td>
<td headers="UPDUSER" class="data">
<label for="f04_0002" class="hideMe508">UPDUSER</label>
<input type="text" name="f04" size="16" maxlength="2000"
value="MOMSDAT" id="f04_0002" />
</td>
<td headers="DERIVED$01" class="data">MOMSDAT</td>
<td headers="UPDDATE" class="data">13-DEC-11
<label for="f02_0002" class="hideMe508">JOBNO</label>
<input type="hidden" name="f02" value="X111Y2222" id="f02_0002" />
<input type="hidden" id="fcs_0002" name="fcs"
value="DB31F7B9ED99E6A2F7295F6B7D236409">
<input type="hidden" id="frowid_0002" name="frowid"
value="AAATI3AAGAAAAIXAAo" />
<input type="hidden" id="fcud_0002" name="fcud" value="U" />
</td>
</tr>.....
<tr>.....</tr>
</table>
To help explain:
I have a checkbox associated with array name f03_NOSUBMIT,
This checkbox OnClick updates a hidden item associated with array name f03. The hidden item is linked to the depr column of my view/table (this functionality is straight from Oracle’s tabular checkbox wizard – works great, no problems).
When the check box is changed, I need to capture the APP_USER value in the UPDUSER field associated with the f04 array (nice that the array names matched up with your example :0} )
To do so, I created a dynamic action:
Name: Set_Upduser
Sequence: 10 (it’s the only DA)
Event: Change
Select Type: jQuery Selector
jQuery Selector: input[name=”f03_NOSUBMIT”]
--note: the event does not fire if I use f03
--since that value is not actually
--changed until submit with this
--method.
Condition: - No condition –
True Actions:
Sequence: 10
Action: Set Value
Fire When Event Result is: True
Fire On page Load: Unchecked
Stop Execution On Error: Checked
Set Type: JavaScript Expression
JavaScript Expression:
var row = $x_UpTill(this.triggeringElement, 'TR');
var otherElement = $('input[name="f04"]',row)[0];
otherElement.value = '&APP_USER.';
Selection type: jQuery Selector
jQuery Selector: input[name="f04"]
This ALMOST works...
When I run the page and click on just one check box, the UPDUSER fields are updated with the APP_USER for ALL the records, not just the row for the checkbox I clicked. And, if I submit the changes, ALL the records in the table now have the APP_USER in the UPDUSER column. Not just the column where the check box was changed (Which would be expected since all the values are changed in the form – hey, the submit part works :0} ).
Your example at http://apex.oracle.com/pls/apex/f?p=45448:11 works, setting the value for the target field only for that row. If I can get mine to work the same way, I will be good to go (as in hog-heaven, doing the Snoopy Supper-Time dance).
I am thinking my issue is with the row identification in the
--- var otherElement = $('input[name="f04"]',row)[0];
I seem to not be picking up the row value in the row var.
Am I reading line correctly where 'input[name="f04"]' is pNd, and row is pValue? Read the description of the $x_UpTill API, not sure how this is working to identify pValue (Row?).
Additionally, I am not sure what the [0] is for at the end of the otherElement var definition. I don’t see that listed with the $ JavaScript API parameters (Google wasn't much help there either).
OR, am I missing something else?
Once again, if you could:
1) let me know what might be different from your working example? (What does yours have that mine doesn’t)
2) Provide any info on how to get your working form downloaded at http://apex.oracle.com/pls/apex/f?p=45448:11. Please, please?
As always, your assistance is greatly appreciated!
Edited by: amckinne on Dec 27, 2011 5:29 PM
Edited by: amckinne on Dec 27, 2011 5:33 PM

Need help to check multiple conditions and set AD user properties

hello All,
I have a data csv sheet where information as follows, using below information I need to update AD account attributes based on below conditions . I have full right and I can set any user properties. So this is not access right issue.
samaccountname,Othertelephone,language,employeeId
abcd                      XXXXXXXXX     EN         SMS
Now I need to check following conditions:
Othertelephone = if this should not be blank ,if so display message " filed is blank " and no changes should allowed in further attributes and it should abort
language= this field should only contain EN or FR value if No display msg " error in language field " and no further changes to the user attributes and it should abort
employeeID= this field should only contain OTP or SMS value if Not filled display msg " error in Employee ID field " No further changes to the user attributes and it should abort
changes to user will permit when all attributes is filled. I do the testing taking samaccountname , othertelephone and employeeId into consideration but it did not helped. Getting error
THIS is complete Code Of my Task where you need my focus on conditions
group=Get-QAdGroup -SearchRoot "domain/vpn group"
Import-Csv D:\VPN.csv |
ForEach-Object{
if ($_.samaccountname -eq "")
   Write-Host "SAMACCOUNTNAME is blank"   -fore red
else
$user=Get-QAduser $_.samaccountname
if ($user.memberof -contains $group.DN)
Write-Host "$($_.Samaccountname) user is allready a member" -fore red
else
Add-QADGroupMember $group $_.Samaccountname
If ($_.othertelephone -eq "")
Write-Output "$($_.samaccountname) telephone Number is blank"
else
if ($_.EmployeeID -notmatch 'OTP' -and 'SMS')
Write-Output "$($_.samaccountname) EmployeeID field is not correctly field")
Else
Set-QADUser $_.SamAccountName -ObjectAttributes @{telephonenumber=$_.othertelephone;EmployeeID=$_.EmployeeID}
error
Set-QADUser : Access is denied.
At C:\Users\g512263\AppData\Local\Temp\5f8facb6-f942-4c3d-b924-8953d9a706da.ps1:37 char:8
+                    Set-QADUser $_.SamAccountName -ObjectAttributes @{telephonenumber=$_.othe ...
+    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (:) [Set-QADUser], UnauthorizedAccessException
    + FullyQualifiedErrorId : System.UnauthorizedAccessException,Quest.ActiveRoles.ArsPowerShellSnapIn.Powershell.Cmdlets.SetUserCm
   dlet

<title>Untitled - PowerGUI Script Editor</title>
Hello JRV,Thank you for your time, There is no comma in my csv file , I double check. below I wrote a simple code.I removed all the conditions and just try to set the EmployeeID and it is working fine with same file.But as soon as I add conditions it gives access denied. as well as if I remove employee Id from your previous code and only try to set telephone No. still it gives access denied.I am just trying to figure out what is causing this.
$group=Get-QAdGroup -SearchRoot "com/Group"
Import-Csv D:\VPN.csv |
ForEach-Object{
if ($_.samaccountname -eq ""){
Write-Host "SAMACCOUNTNAME is blank" -fore red
}else{
$user=Get-QAduser $_.samaccountname
if ($user.memberof -contains $group.DN){
Write-Host "$($_.Samaccountname) user is allready a member" -fore red
}else
Add-QADGroupMember $group $_.Samaccountname
If ($_.othertelephone -ne "")
Set-QADUser $user.SamAccountName -ObjectAtt Aributes @{telephonenumber=$_.othertelephone}
} else
Write-Output "$($_.samaccountname) phonenumber is blank"
If ($_.EmployeeID -ne "")
Set-QADUser $_.SamAccountName -ObjectAttributes @{EmployeeID=$_.EmployeeID}
}else
Write-Output "$($_.samaccountname) EmployeeID field is blank"
If ($_.Preferredlanguage -ne "")
Set-QADUser $_.SamAccountName -ObjectAttributes @{Preferredlanguage=$_.preferredlanguage}
} else
Write-Output "$($_.samaccountname) PreferredLanguage field is blank"

Setting values to properties on load

Similar Messages

Maybe you are looking for