Settings for inspection point user field

Question

Hai gurus,
i want to know the settings for inspection point user field(150)
1) Field combination = 150
2 )Inspection type = ?
3) Functional location- field active  = ?(predefined field)
under user field
1)Text length 18 - Field active = ?
2)Text length 10 - Field active = ?
3)Number  length 10 - Field active = ?
4)Number length  3 - Field active = ?
5) Date - Field active = ?
6) Time - FIeld active = ?
waiting for positive reply.
regards,
sekar chand

Answer 1

dear Sekar
1) 150 inspection point is maily used for production related inspection. 03 , 04 . it is a freely defined inspection point which means you want to carry out several inspections for each operation during the production process
2) It is not Inspection type it is inspection point type- There are mainly 3 inspection point type
Freely defined - explained
Equipment related - You need this inspection point type if you want to carry out calibration inspections and record the results of test equipment inspections or inspections of functional locations
Inspection points to identify samples-You need this inspection point type if you want to manage samples and record inspection results for physical samples
3) Predefined field is for identification of the inspection point.
Example for inspection point type  1
For inspection point type 1 (inspection point for equipment) that is used, for example, in a calibration inspection, the equipment number must be entered. (To access the results recording function, however, you can use a different key word instead of 'equipment number', such as, 'test equipment').
Example for point 3
The sample-drawing procedure determines the number of samples to be taken. The system automatically creates an inspection point for each sample.
4) User fields are again identification. You can add in key work text which will appear while result recording.
5) Field Active  -This helps in sorting out the user fields.  An identification field is only active if you have made an entry in this field.Fields with numeric entries are required fields. The numbering sequence that you define for these fields uniquely identify an inspection point.
a typical example can be User field/field active/keyword combination
1)Text length 18 -1 -Inspector Name
2)Text length 10 - 2- Location
3)Number length 10 - 3- Shift No
4)Number length 3 - 4- Section No
5) Date - 5- Date
6) Time - 6-  Time
please Date and Time populates automaticaly. it is not mandatory that you use all the fields
Hope this helps
Regards
gajesh