BAPI for inspection point

Hi,
I am trying to find BAPI through which i want to do inspection point and result recording. If anyone has done then let me know which bapi is suitable and provide what are all data's need to pass.
Regards / US

Hi,
Check the documentation for function BAPI_INSPOPER_RECORDRESULTS. That gives a pretty detailed description of all the import requirements
Functionality
You can use this method to confirm the result of a quality inspection for an inspection operation or inspection point. The following functions are supported:
Creating an inspection point 
Closing an inspection point 
Changing inspection point data 
Recording inspection results at characteristic level (summarized) 
Recording inspection results at sample level (summarized) 
Recording inspection results at single value level
You define within an inspection operation whether you work with or without inspection points. In accordance with this specification, the parameter INSPPOINTDATA is required or optional.
Regards,
John

Similar Messages

  • What is the BAPI for Inspection lot change - QA02??

    Hi Guys,
    Can anyone tell me plese, What is the BAPI for Inspection lot change - QA02?
    Thanks

    Hello,
    This BAPI suppose to be able to do that for you:
    BAPI_INSPLOT_SETUSAGEDECISION
    Best regards,
    Marcin

  • Settings for inspection point user field

    Hai gurus,
    i want to know the settings for inspection point user field(150)
    1) Field combination = 150
    2 )Inspection type = ?
    3) Functional location- field active  = ?(predefined field)
    under user field
    1)Text length 18 - Field active = ?
    2)Text length 10 - Field active = ?
    3)Number  length 10 - Field active = ?
    4)Number length  3 - Field active = ?
    5) Date - Field active = ?
    6) Time - FIeld active = ?
    waiting for positive reply.
    regards,
    sekar chand

    dear Sekar
    1) 150 inspection point is maily used for production related inspection. 03 , 04 . it is a freely defined inspection point which means you want to carry out several inspections for each operation during the production process
    2) It is not Inspection type it is inspection point type- There are mainly 3 inspection point type
    Freely defined - explained
    Equipment related - You need this inspection point type if you want to carry out calibration inspections and record the results of test equipment inspections or inspections of functional locations
    Inspection points to identify samples-You need this inspection point type if you want to manage samples and record inspection results for physical samples
    3) Predefined field is for identification of the inspection point.
    Example for inspection point type  1
    For inspection point type 1 (inspection point for equipment) that is used, for example, in a calibration inspection, the equipment number must be entered. (To access the results recording function, however, you can use a different key word instead of 'equipment number', such as, 'test equipment').
    Example for point 3
    The sample-drawing procedure determines the number of samples to be taken. The system automatically creates an inspection point for each sample.
    4) User fields are again identification. You can add in key work text which will appear while result recording.
    5) Field Active  -This helps in sorting out the user fields.  An identification field is only active if you have made an entry in this field.Fields with numeric entries are required fields. The numbering sequence that you define for these fields uniquely identify an inspection point.
    a typical example can be User field/field active/keyword combination
    1)Text length 18 -1 -Inspector Name
    2)Text length 10 - 2- Location
    3)Number length 10 - 3- Shift No
    4)Number length 3 - 4- Section No
    5) Date - 5- Date
    6) Time - 6-  Time
    please Date and Time populates automaticaly. it is not mandatory that you use all the fields
    Hope this helps
    Regards
    gajesh

  • BAPI for Inspection lots

    Hi,
    I'm executing the following steps in development:
    Goods Receipt
    (Transfer Order Creation)
    Transfer Posting
    (Transfer Order Creation)
    The goal is to receive the goods in an "external" Storage Location and then repost it in an "internal" Location. The TOs are automatically generated per Customizing of the Movement Types.
    I'm using the BAPI  BAPI_GOODSMVT_CREATE.
    In case of automatical Inspection Lots (Material master, view Quality management) the Express document lands in my Wokplace Inbox with the following error message:
    Error during creation of transfer orders for material document 5000002931
    Date: 10.03.2009
    Time: 13:13:42
    Transf.reqmnt CP1 8000000325
    TRs relevant for inspection lots cannot be processed using this func.mod.
    By pressing 'Ctrl + F6', you can directly trigger subsequent processing
    Is anyone aware of the BAPI, which will work with the inspection lots?
    Thanks,
    Taras

    Hi,
    you should be able to create inspection lots when executing                 
    BAPI_GOODSMVT_CREATE. See for example the attached note 536769 that         
    is about wrong status in the inspection lot created in this way.                                                                               
    Please review your data used for testing this BAPI. 
    Best Regards,
    Arminda Jack

  • Runtime error for Inspection Point Results Recording

    Hi,
    I am changing the already done Results Recording for using already used Inspection Point.
    I am getting the runtime error. Anybody came across such error?
    Regards
    Ramakanth

    Hi,
    In the in-process inspection I am using Inspection Points. Initially I have done Results Recording once with quantities.
    And then again I wanted to change the quantities for the same Inspection Point. So, I went to Results Recording for same Inspection Point and changed the quantities and saving. At this event I am getting Runtime error.
    I  have even deactivated one BADI INSPECTIONLOT_UPDATE and tried again. Even then I am getting same error.
    Ultimately my requirement is this:
    My client wants UD at operation level. They want only quantity which is accepted in Results Recording to be moved to the next operation. In the operation level confirmation the system should only accept the quantity which is accepted in Results Recording.
    Any suggestion in this regard.
    Thanks
    Ramakanth

  • Pop-up screen does not appear for inspection point- In-process inspection

    Hi,
    We havs set up inspection points( time-based) in the master recipe. In that inspection point , we have defined date,time and inspector name as 3 fields to be maintained , before the results recording can start for each characteristic.
    Even though the inepction point is assigned in the header QM data of recipe , system does not give the pop-up at all to record the date , time and inspector's name.
    Please let me know what settings might be missing to get this pop-up screen to record the inspection date,time and inspector's name.
    Regards,
    Manohar

    The Sampling procedure with free inspection points radio button is chosen. However, we are not getting the pop-up screen of QE11.
    What we are trying to get in QA32 , is when we click on "results recording" push button , we want to get QE11 screen to pop-up so that the inspector's name and date and time are recorded , before the results recording screen comes.
    Please suggest whether this is a personal setting or master data setting or config setting or some exit to be used.
    Regards,
    Manohar

  • Different MICs for Inspection points

    How can you do if you like to have different inspection characteristics for different (freely-defined) inspection points. E.g. if you take a sampl (sampl 1) by using freely-defined inspection ponits and test 5 differnt MICs, then 10 minutes later you pick another sample (sampl 2) out of your production and there you only need to inspect 3 MICs. How can you set this up?

    Hi ,
    Better create different operation in routing & then assign different MIC s to different to operation .I think that will be better option
    ( Aster 5 mins you are going to check only 2 MIC then that will be 1 opoeration ,Then after 10 mins you are checking 5 MICs then that will be 2 nd operation like wise you can check & take result of different sample at different stages.
    Regards
    SANIL

  • Defect recording for inspection points

    Hi,
    My client having requirement of recording the defects every hour.in standard SAP defects recording with respect to inspection point is not possible.Is there any other way to do this.
    Regards,
    S.P.Selvathangam

    Hi,
    It is not a problem follow the below step.
    1). Go QM01 enter notification type Q3 (Manual Defect and Notification creation) and press enter.
    2). After enter system will raise the one pop up screen here enter the production order as well as operation number and press enter.
    3), After that it will open defect with notification screen here you can enter defect qty, defect code reason, causes etc and save.
    For any query revert.
    Thanks & Regards,
    S.Babusingh

  • BAPI FOR INSPECTION PLAN

    Plz tell me step by step procedure of bapi_inspectionplan_create using LSMW .

    Hi,
    Please go through following link
    [https://forums.sdn.sap.com/click.jspa?searchID=26454811&messageID=7508879|https://forums.sdn.sap.com/click.jspa?searchID=26454811&messageID=7508879]
    Hope it helps

  • Inspection point qty confirmation for operation - INprocess Inspection

    Hi Experts,
    After doing partial confirmation in the Result recording, the partial confirmed qty moves down to the next operation and is confirmed. But using QM result recording when I try to post the next partial qty, the system cancels the previous confirmation although the next operation has been confirmed for the partial qty. And I am able to confirm the full qty for the operation
    How to avoid this situation ?
    Regds
    Jomy

    Dear Jomy,
    Please use 150 as the inspection point in your routing header.
    But please make sure that in configuration you have this maintained.
    SPRO>QM> Quality planning > inspection planning > general > define identifier for inspection point> select the inspection point you are using >double click> function module> maintain in Automatic creation of insp. Points > maintain this function module QAPP_CUST_IP_CREATE > tick the use function module
    Test with a  new order and lot.  Each time you go for RR it will go for new partial lots. So confirmation will get added up as in  co11n process.
    Hope this helps
    Regards
    gajesh

  • Different inspection point field combination for each operation ?

    Hi
    I see that i can choose inspection point user field combination in the inspection plan header.
    But what i need is to define different combinations for each operation,
    Is this possible?
    If not do u have any other suggestions?
    Thanks,
    Alper,

    Dear Alper,
    I just meant in config .SPRO > Quality Management > Quality Planning >Inspection Planning >Define Identifier for Inspection Points
    you can make use of all the identification field for your purpose ( Text length 18, text length 10, Number length 10, number length 3 )
    operation wise what is needed to enter you make use of it
    Only a suggestion
    Regards
    gajesh

  • QM Inspection Points

    Gurus
    I require that inspection points should be created automatically for inspection lots when i view QA32
    To do so i have done settings in SPRO > QM > Quality Planning > Inspection Planning > General > Define identifier.
    Here i kept 2 under field Time for field combination 150 assuming system will create inspection points every 2 hours automatically but i cannot see inspection points created
    Where am i missing? Please reply
    Regards

    Dear,
    Have have to assigned inspection characteristics in routing that will be your in process inspection
    When you Release the order the inspection lots will be generated.
    Please maintain the Quality management Inspection point on the operation details and select time related. For Inspection point completion select Quantity, Valuation and Confirmation(Production).
    mention the time as 1 and unit a HR (Hour).
    You can record the results for every hour.
    But if you are not doing inprocess inspection & inspection with GR in that case you have to create insepction plan for material assign inspection type as 04 in material master
    Now for hourly analysis this you can enter by selecting scope not fixed & single value in master inspection characteristics
    You can enter time & other deatils of sample by using inspection point in inspection plan.
    Or else QAPP_CUST_IP_CREATE for generation of automatic inspection points.
    Then it will work for you.
    Regards,
    R.Brahmankar

  • QAPP_CUST_IP_F4 - inspection point help

    Two related questions here.  I haven't set this FM up before.
    One:  the FM mention table T_TQ79_F4_VALUES.  I can't find this table in our system.  Should this table be there? 
    Two:  The FM indicates that the table is index by the user field attribute which is a one character field.  The problem I see is that if I have multiple inspection point identifiers.  I.e. I create 901 and 902. In 901 I use the field number(size =3) as a shift number... 1, 2 or 3.  But in 902 I use the same field as an employee ID number.. 213, 418, etc...  How can I limit the help information for each IP identifier.  The user would be clueless as to the IP identifier being used.  For 901 I want the help to display "Enter the shift number that sample was taken on."  For 902 I want to enter "Enter the employee number of the person that took the sample."
    FF

    Yes.. we saw the defined structure.  But the module help specifically states to maintain the values in the table T_TQ79_F4_VALUES.  The values are then read into the structure from the table.
    We have already designed a Z-table should we need it.  But we try not to use a Z-tables if SAP has a provided solution.  We have submitted an OSS note to them on this.
    I just wanted to see if it was just us that was missing the table, or if others were missing it.  If it is missing, I'm wondering if any one has implemented this FM and if they all used Z-tables for storing their data or if SAP provided something.  I searched OSS already to no avail.
    In any case, SAP either needs to update their documentation for this process, or they need to provide the table that is mentioned.  Seems pretty clear that there is an SAP disconnect here.  I've pasted the help documentation from the SAP provided FM below.
    FF
    F4 - Help for the Inspection Point Fields                                    
    You can use this function module to specify input help (F4) for the user field for inspection point identification. 
    The function module serves as a copy model for user-defined programs. Note that the interface for user-defined programs must correspond to the interface for this function module.
    You must enter values for the specified user field in the table T_TQ79_F4_VALUES to offer a list of values for the user. You can enter an explanatory short text for each value.
    SAP determines the format for the possible values. This means that possible values are determined and exported based on the table. 
    For more information, see documentation on the individual parameters.

  • Creating an inspection point

    Hi,
    Where in the SAP menu or SPRO I can create the inspection point?
    Thanks
    YY

    Dear YY,
    To creat an inspection point follow below path
    SPRO u2013 Quality management u2013 Quality planning u2013 Inspection planning u2013 General u2013 Define Identifier for Inspection points
    Thanks
    Vinay

  • Create a Inspection Point

    Hi,
    I need help. What is the way to create a new Inspection point by the Transaction QE51N and the BAPI_INSPOPER_RECORDRESULTS?
    Thanks in advance.

    Dear Trini Rolden,
          The Transaction QE51N is used in SAP for result recording purpose.
    Result are recorded against inspection lot.Again inspection plan assign in inspection lot. If you maintain inspection point in inspection plan header, then you can record the result of that particular inspection point.
    If you wants to create inspection point functionally, follow the below step:-
    SPRO -> Quality Management - > Inspection Planning -> General --->Define Identifier for inspection Point -> Execute --> (Create your own inspection point)
    If you wants to prefer Customize Developement:-
    user exit QAPP0001 -->User exit QAPP 1 (create inspection point)
    You can use this to give pop up or default names of the inspection point
    here you can call
    ALL FUNCTION 'BAPI_INSPPOINT_CREATEFROMDATA' "Create Inspection Point
      EXPORTING
        data =                      " bapi2045l4    Data for inspection point
      IMPORTING
        insplot =                   " bapi2045l4-insplot  Inspection lot number--->use user defined
        inspoper =                  " bapi2045l4-inspoper  Inspection lot operation number
        insppoint =                 " bapi2045l4-insppoint  Inspection point
        return =                    " bapireturn1   Return value
        .  "  BAPI_INSPPOINT_CREATEFROMDATA
    Regards,
    Laxmikanta.

Maybe you are looking for