Settings for the system to create single requisition

MD04 shows there are two dependent requirements for a material.
The MRP is creating for every dependent requirement a new purchase requisition. So two purchase requisitions created for the two dependent requirements.
But Business wants only one Purchase requisition should be created.
For your information - The settings in the MRP4 is set on collective.
Where are the settings for the system to create single requisition?

>
Sambit@sdn wrote:
> Thanks for the reply, I absolutely agree with your clue (I had also proposed the same solution)
> The lot-size used is lot-for-lot.
> But the Business is not ready to bring a change in its lot size procedure.
> Is there any other way to make this possible ? (Keeping lot-for-lot only)
>
>
> Guys, the MRP control paramenter - Planning Mode in MD01 - Can this be helpful ?
> Or any other suggestion ?
Dear Sambit,
In my understanding the above suggested is only way
Planning mode MD01 will not play any role in this case
May be some other experts may come into the picture & throw some light
Good Luck !!!
Regards
Madhu

Similar Messages

Did Lion eliminate the finger gestures for show the previous page and show the next page? I've checked system settings for the track pad and it looks like the got rid of one of my favorite finger gestures when browsing the internet. How do I get it back

I've upgraded to LION. It looks like LION eliminates the finger gestures within internet browsing that used to yield navigating to the previous page or navigating to the next page. I think it was a 3 finger swipe to the left and a 3 finger swipe to the right. It looks like this has been eliminated. I've gone into the system preferences and went through all the new settings for the track pad finger gestures. I've not found a combination that allows me to swipe on the track pad to do the page forward / page back function.
How to I get this back? I was my favorite one and now I can't get there!

For going back to the previous page try a 2-finger gesture. Two fingers in the other direction will take you back.
cornelius

Want to create new certificate for the SYSTEM PSE

when i got o tcode 'STRUSTSSO2" In my system i am seeing a wrong certificate for the system PSE.
i want to delete and and create a new certificate.
Can some one tell me detail steps how i can remove the existing certificate and create a new one.
I am going to use the new certificate for SSO from portal to this server.
Thanks
Andy

Hi Andy,
To remove the System PSE, follow the procedure described in [SAP Help|http://help.sap.com/saphelp_nw70/helpdata/EN/b6/23273aafa35d46e10000000a11402f/frameset.htm].
To create a new one, see the procedure [here|http://help.sap.com/saphelp_nw70/helpdata/EN/07/03473cbff75b01e10000000a114084/frameset.htm].
Regards,
Henk.

There is already a transaction for the systems of this product version(MOPZ)

Hello All,
I am trying to configure maintenance optimizer in Solution Manager 7.0
on Windows 2003 server and SQL 2005 server.
I am configuring this for SAP CRM 2007 server.
Created the server, database and system in SMSY
Created Logical Component in TA code SMSY
SM59 connection for SAP-OSS is OK.
S-User is assigned to a User.
Created a solution using TA code solution_manager.
Defined the product version for the solution created in the TA code
solution_manager.
When creating a Maintenance Optimizer transaction, I select the
product version and its logical component in the Plan Maintenance
(Phase) and click on Continue to go to Select Files Phase, I get below
warning:
Information Procedure 8000000130 Saved
Warning: Status was reset by system
Warning: There is already a transaction for the systems of this
product version
I cannot get pass this phase.
I have deleted and recreated the solution, carried out the same
activity again but its giving the same Warning
Warning: Status was reset by system
Warning: There is already a transaction for the systems of this
product version
Any help will be appreciated???
Regards,
Satish.

Hello Ragu,
Thanks for your response.
As of now, we do not have ChaRM in place. Secondly, we use a single customer number.
I would like to let you know that in our landscape we have two CRM server, one ECC sever, one SOLMAN7.0 server.
I tried to configure MOPZ for CRM, ECC, SOLMAN server to download the respective STACKS.
I was successful in configuring CRM and SOLMAN.
But when I tried to configure in ECC, it failed due to RFC erros.
So I deleted the transaction for the ECC system and deleted the system itself in Solution Manager.
Reconfigured the Systems in "SMSY", RFC connections are correctly defined to configure MOPZ between SOLMAN7.0 and ECC6.0.
When I start configuring the MOPZ, I cannot get pass the first phase and this is when I get an error: There is already a transaction for the systems of this product version.
Please let me know if you need further information.
Regards,
Satish.

Windows cannot load the user's profile but has logged you on with the default profile for the system.

My Windows 7 crashed a couple days ago after a windows update, I got this message.
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
I restarted the machine and got this message
Windows was unable to load the registry. This problem is often caused by insufficient memory or insufficient security rights.
DETAIL - The process cannot access the file because it is being used by another process. for C:\Users\TEMP\ntuser.dat
I checked the event Log I found these .
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile.
DETAIL - The process cannot access the file because it is being used by another process.
This is the first error in the event viewer after a successful logon
The description for Event ID 34 from source ccSvcHst cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
ccSetMgr
Windows cannot load the user's profile but has logged you on with the default profile for the system.
DETAIL - Access is denied.
Looking at the Logs all I can tell is that after the Desktop Window Manager started if caused this error.
The winlogon notification subscriber <SessionEnv> was unavailable to handle a notification event.
then this one
The Desktop Window Manager has exited with code (0x40010004)
Then this before it shutdown.
The User Profile Service has stopped.
I started up the PC and the first message I got was
How can I get access to my user profile? do I need to createa new Administrator account? Please help
The EventSystem sub system is suppressing duplicate event log entries for a duration of 86400 seconds. The suppression timeout can be controlled by a REG_DWORD value named SuppressDuplicateDuration under the following registry key: HKLM\Software\Microsoft\EventSystem\EventLog.

hi do the following
1. In Search programs and files (Windows 7) area, type in regedit, and press Enter.
2. If prompted click yes,
3. expand the following HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
4. click the sid that related to your admin profile (if you not sure, click each sid and in turn look to the right hand side of registry editor it will show who that sid is related to one of the registry files should hae in description localhost\admin or
something similair)
5. right click the sid and press delete.
6. restart your machine and log back on with the admin account, this will then rebuild the admin profile... dont worry when it loads and none of your personal settings are saved or files or folders... go to c:\users
in here you will see two folders for the admin account, one will be just admin and the other most likely admin.localhost
i cant remember which one is which but just check both, one will still have all your files and folders in it.
i suggest making a backup of your data before doing this incase something does go wrong, but ive had this happen many times in a domain enviorment and has worked for me everytime.

"No valid RFC for the system VEP" in solman_setup in solman7.1

Hi Gurus,
     I've installed Solman 7.1. Configured STMS as single domain alone. STMS was successfull and the RFC was created and that also successfull. But in solman_setup, in system preparation phase, check STMS, its throwing the error "No Valid RFC for the system VEP".
          I tried deleting the RFC and recreating it, Deleting the STMS ans reconfiguring it, Tried 000, 001 and 100 client, Restarted the SAP server, Restarted the OS lvel also. But nothing works. I've searched but no solution works. Please suggest me what might be the solution for this.
   And also I need to configure the MOPZ in solman 7.1. Please guide for that, since i've not doone in 7.1 and everything in this was new.
Thanks and Regards,
Santhosh Kumar.

Issue resolved by activating single system landscape in STMS.
Regards,
Santhosh Kumar.

Trying to call a Webservice - "Settings for the J2EE Server do not exist."

Hi, we're on SAP ECC 6.0 and I'm trying to get access to a webservice:
BAPI converted to Webservice ok
Webservice activated ok
http active ok
WSADMIN - click on the WSDL button - browser launches, user id requested, userid given, WSDL displays perfect! Even tested from the outside.
WSADMIN - click on the Web service homepage - Settings for WDSL generation (RPC or Document style, same result) - Error - "Settings for the J2EE Server do not exist."
Internet browesr - I go to the URL for the WSDL - works again perfect!
Internet browesr - I go to the URL - error ! <faultstring xml:lang="en">SOAP processing failure, error id = 112 </faultstring>
Are the two errors the same?
Do I have to have a J2EE server to enable Webservices?
Is this a complex system change?
Is there a workaround?
Thanks for any tips on getting Webservice to function
Philip

hi,
when the WAS ABAP has a webserver running and the WSDL service up and running (WSDLs are created dynamically) you get the WSDL served from WAS ABAP.
"Webservice homepage" is an application written in Java and running on WAS Java., So, if you want to use that application you have to have a WAS JAVA up and running, you have to have the application 'Webservice homepage' up and running and of course on WAS ABAP you have to have the URL of the WAS JAVA specified to enable the WSADMIN function to link you to the Java app.
Most probably you do not even have a WAS Java running and/or the application 'webservice homepage" not set up. Either way, in my opinion the application "webservice homepage" is crap anyway (because it is not really independent. if SAP implements something strangely on the server side they of course implement it the same way on the client/testing side, so you never find out that in real world scenarios e.g. no client understands the feature X the way SAP implemented it). use any non-SAP-tool to test your SAP webservices, e.g. XML Spy, or SOAPUI.
my 2 cents,
anton

Where can I change the font settings for the name of the month in iPhoto's calendar project?

where can I change the font settings for the name of the month in iPhoto's calendar project? I just ordered two copies of a calendar I designed in iPhoto and was surprised to find that the calendar's months were printing in something like an Arial 10 pt font. On previous calendars I've printer via iPhoto and Apple, the font was much larger. I've tried every menu option in iPhoto and the Calendar Project program and can't find where this is modifyable. Which leads me to ask, what the heck happened here in the first place? I did not consciously change the default.
I do remember that I got some notice when I first tried to print the calendar about the default font having been changed, but I don't know how this could have happened, and I didn't know what impact that had on the calendar until it was delivered. I typically print about a dozen annual calendars but won't buy another until I've got a handle on this problem. For the most part, the rest of the calendar is okay.
As a P.S. is there anywhere where one can get a power user's manual, or instruction on iPhoto?
Message was edited by: KPAausFrankfort

"Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers. (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
What are the sequence of steps that you and your batch processing take from Bridge?
You can use call Photoshop's Image Processor from Bridge to create the jpeg files (Tools > Photoshop > Image Processor). In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display). In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

What are the settings for the "Default Client Settings"?

What are the settings for the "Default Client Settings"? I changed them instead of creating a new policy and would like to fix that.
Thanks
James A+, Network+, MCP

Hi,
The blogs below provides the default client settings.
Default Client Settings in SCCM 2012 SP1
http://prajwaldesai.com/default-client-settings-sccm-2012-sp1-sccm-2012-sp1/
Note: Microsoft provides third-party contact information to help you find technical
support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce

Change the default margin settings for the MS word!

Hi All,
BI Publisher version:latest 10.1.3.4
DB:10.2.0.4
Oracle Apps:12.0.6
OS:AIX
We are facing an issue of which description is as below:
RTF output is being uploaded through "XML Publisher" Responsibility.
3.1.9 Header and Footer Margin from Edge Not Preserved in RTF Output
This issue applies to Versions 10.1.3.3, 10.1.3.3.1, 10.1.3.3.2, 10.1.3.3.3, 10.1.3.4, and 10.1.3.4.1.
Microsoft Word provides a Page Setup option for specifying the margin for the headers and footers from the edge of the page. This option is available by choosing the File menu, then Page Setup, then the Margins tab, and the From edge box. This margin setting is not retained when the output format is RTF. The output is created with the default margin settings instead. The margin settings do work correctly for other output formats such as HTML, PDF, and Excel.
So, the "default setting" mentioned here is around 1/2 inch for MS Word which is getting added in the output, even if the margin in template is zero.
Expected output:
So what we need to do is -
1. Check the MS word installation on the application server
2. Change this default margin setting as top and bottom 0 on the server in the MS word page setup. (I can give you steps to do this in word if required)
We have tried setting this margin to 0 on client side and generating the output and it makes no difference, so it must be coming from the server.
We need to know how could we modify the settings and need to know te source and Check the MS word installation on the application server?
Could anyone please share such an issue faced before!
Thanks for your time!
Regards,

Hi All,
Moreover,
Our understanding about the RTF output is this -
When we generate an RTF report output from Oracle EBS, the word document that is generated is with the settings of MS word that is installed on application server.
This understanding could be wrong as we have never faced such situation before! We have come to this conclusion because the default settings that we do on client machine do not work.
And as per the documentation of BI publisher the RTF should always be generated with the default settings of MS word.
So what you could help us with is this -
1. See if the MS word application is installed on application server ( if you think this is not application server, but any other server then please check there!)
2. Change the default margin settings for the MS word.
Regards,

The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.

Hi,
I have SP 2013, and it was working properly. and workflows send emails perfectly. yesterday, i decided to build a fresh site collection so i deleted the old one and created a new one. now, workflows are unable to send emails. i'm sure it has nothing to do
with my mail server cuz no changes happened to it. i'm sure about the settings for outgoing mail on central admin. all i did, was to enter mail server IP in outgoing mail field and email below it.
in the workflow status the status says "error" followed by this message: "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."
Any help please?

Hi,
According to your post, my understanding is that you failed to send email after building a fresh site collection.
I recommend to verify that you have entered your SMTP server name correctly.
You can add it as FQDN e.g. ServerName.DomainName.
Here are a similar articles for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f0605f59-0baa-49c9-854e-0fb369a9e5a0/cant-seem-to-get-emails-to-send-in-sharepoint
http://alpesh.nakars.com/blog/sharepoint-outgoing-email-issue/
Best Regards,
Linda
Linda Li
TechNet Community Support

"The system cannot create journal template"

While creating the journal template for my legalapplication using wizard i get the following error
"The system cannot create journal template"
am using category, group and time as my header dimension --
group dimension contains the LC.
please suggest what steps can be taken. Also while trying to access journal from etools we get the message journal not found.
Thanks

Hi Andy,
Please check how many sheets are in a default excel workbook on your client. If less than three, BPC fails to create the journal template. If that's the case, try setting default number of worksheets to 3, then retry journal template creation.
If the above is not the issue, then you'll have to check that reporting services is working correctly. As a first step, go to http://<app server name>/reportserver (or reportserver$<instancename> if you are using a reporting services instance and left it with the default name)
If that page compiles and shows without error, then try http://<app server name>/ reports (or reports$<instance name>) If that one also compiles/doesn't give errors, then reporting services is working.

Discount for the system / not for the components

At our case, the company sells machines. Some of the machines are systems which are made up with the combination-assembly of other machines. These systems are created-presented on SAP by an upper level material. There is no pricing fpr these upper-level machines-systems. There stand material BOMs which are created by the code CS01 for those systems. The price of those systems come from the sum of the price of the components. As I mentioned before, there is no price for the system and the system's material code itself. Thisis provided by the item type customizations. We want to make a specific customer discount when the customer buys a system. This means that a discount will be valid for the components when only they are bought as a part of a system. But if they are bought one by one we don't want make discount. We want to make discount for system sellings. How can we do this?
Thanks in advance.

Hi Yasar,
Take Header pricing discount conditions
1.HA00 if you are giving discount in % or
2.HB00 if you are giving discount value based.
If you take Header conditions you need to enter the discount manually at sales order.
Other process is you take condition type K004 and maintain condition record for that Header material (System).
I hope your requirement will be solved.
Regards,
Murali.

Active transaction for the systems of this product version

Hi All,
When i tried to create a new transaction for maintenance optimizer, I received the warning below:
There is already a transaction for the systems of this product version
The solution from note 1296589 does not help.
Transaction code /n/tmwflow/maintenance only show one open session (the current session).
Regards,
KayJay

> When i tried to create a new transaction for maintenance optimizer, I received the warning below:
> There is already a transaction for the systems of this product version
What happens if you click on the button "Maintenance transactions" just next to the "new Maintenance" button?
Markus

Settings for the system to create single requisition

Similar Messages

Maybe you are looking for