Settings not transferring through qmaster.

I've been working with compressor for the last year or so but I can't figure this out.
I have my source material, which is interlaced, so I select top first. I have it set to a progressive output with deinterlacing. This works fine when I use it with just my computer, however I have 2 other computers to help with the processing. When I choose to use qmaster, it ignores all the setting i've chosen.
Am I doing something wrong? I'm using compressor 3

Out of the items you listed Favorites, ringtone assignments...the Sync should actually save only the text messages in the backup...
Ring assignments are not saved nor are bookmarks that are then synced back from iTunes settings...If you have bookmarks set to save that is...
Typically user settings are saved like key clicks on off and 3g on or what's the default email account etc...few things are not saved but texts should have been...
When you restored it sounds like you chose "Set up as new iPhone" probably per Apple store Genius direction...doing this DOES NOT put back ay settings or text etc... It's the best option choice if trying to rid your phone from bugs in the OS but sadly all data is required to be synced back and settings are lost...
You should still have the old backup ...you can choose to restore from back up to get settings back as you liked...

Similar Messages

Why are Network Settings not Transferring from a Master DMG to the Desitination

Hi people,
can anyone assist me with finding out why Network Settings are NOT transferred from a source Master HD to a DMG to a Destination HD.
I have many hours spent trying to debug this - any pointers to a solution would be greatly appreciated.
Background:
I administer about 400 Macs of mixed types / generations (iMacs - MacBooks - MacBook Pro's).
We create master setups for different locations / purposes around the Campus and transfer these masters to DMGs.
We then clone the various macs as needed from these DMGs using a variety of methods including local (FW800 - USB) and network transfers.
The newest master (staffHD at 10-8-2) works perfectly but trying to clone / copy it by any method leaves out the custom network settings and you only end up with the default Wi-Fi / Ethernet / Firewire with total loss of the additional services and custom proxy settings.
Methods used to date to try the transfer (all get the same null result)
to-from DMG using Disk Utility
to-from Sparse Image via Disk Utility
to-from DMG using Carbon Copy Cloner
to-from Sparse Image via Carbon Copy Cloner
direct to 'target disk' via FW800 using Disk Utility
direct to 'target disk via FW800 using Carbon Copy Cloner
direct to 'target disk via FW800 using rsync -aHv
direct to 'target disk via FW800 using cp -Rv
Everything BUT the network settings transfer perfectly (excluding of course the usual trackpad / mouse custom settings).
I guess something is wrong with this master source but for the life of me I can't work it out. I have seen it in the past but it seemed to work itself out with the next revision - this one just wont.
HELP!
Have a Great day!
pete

Hi Linc,
thanks for the reply - I suspected a hardware issue or some sort of privledges problem, but as far as I know have only had this problem with Mountain Lion, and it still fails on hardware like to like transfers. I was hoping to avoid needing anything addidtional but it looks like I'll have to.
Have a Great day!
pete

Text not transfered through Interface...

Hi Experts:
We have created an interface between two SAP installations. The PO Created in one system should be converted and posted as an SO in the other server.
Here we have two scenarions;
1. In Outbound server, an SO will be created, it will be converted to PR and PO will be genetared automatically and will be sent to second server as SO through Idoc. This is working fine, and SO is posted in second server with all the data incuding Text.
2. In Outbound server,We create a PO manually and send it to another Server. Here all the data is getting posted in SO instead of the Text.
    Here basically the customised PO text Id (F07)in Outbound Server is 3 characters. The same is being passed on to the other server, (The recieving
    Side Idoc is having all the data including the text, text object and text type). But it is not getting posted to the the sales Order.
   The sales Order Text ID is 4 char(ZITP) ( The Po text Id being passed is different to the SO text Id ).
Thanks,

Hi Simi,
The mapping of Text ID of PO to Text ID of SO can be acheived in many ways.
You have a couple of user exits in IDOC_INPUT_ORDERS where you can write code to manipulate the correct segment field.
Or you can do it by creating mapping rules in transaction SALE and assignng the rule to a SENDER and RECEIVER. See Below
<b>Converting Data Between Sender and Receiver
The tool can convert and map field contents from a sender field to a receiver field. Organizational units, units of measurements and customer-defined field contents can be transferred from one system to another.
A standard tool can be used to define and maintain conversion rules in ALE.
These rules are defined in this section by carrying out the following steps:
1. Define rules:
Rules are always defined for each segment.
2. Maintain rule:
Conversion is carried out at field level following the defined rules.
3. Assign rule to IDoc:
The assignment defines when the rule is to be used. This is defined for the sender/receiver and message type.</b>
The path is SALE -> Modelling & Imp... -> Convert Data between sender and receiver .
Cheers

Canon CR2 custom settings not transferring to converted DNG file

Hi,
First post & using 8.6 on Mac OSX 10.9.4 shooting Canon 1Dx.
After years of sucessfully converting Canon CR2 files with custom settings to DNG for archiving, just recently I’ve been having an issue where the actual settings aren’t transferring or being recognised.
It used to work easy & fast by just selecting the Canon CR2 files with their sidecars and drag/dropping straight onto the DNG Converter which I have sitting in the dock, then hit the convert button.
Yes, the files still convert to DNG but no custom settings. The file is like the original unprocessed raw image
Any solutions anyone?

Thank you everyone, much appreciated.
After posting last night I thought about reproducing the same issue on my laptop (MacBook Pro) as I run the same software (PS CC 2014, ACR 8.6, DNG Converter 8.6) and workflow as on my main Mac.
And yes, the problem is definitely reproducible.
Then had a lightbulb moment by downloading & trying an earlier version of DNG converter (v8.5)
Voila! Lo & behold the problem is gone. 8.5 is king
So I’m with you ssprengal, it appears DNG 8.6 is somewhat buggy when it comes to transferring/recognizing customised settings in the way I normally do it.
(ie drag drop CR2 + Sidecars onto DNG Converter)
FYI, when editing CR2 files direct in the ACR 8.6 dialogue window I can convert to DNG with settings intact....but for me that workflow holds up ACR for eding on other work
FYI_2
Usual editing workflow goes like this:-
Edit CR2 files direct in ACR 8.6
Save files as Jpegs, Tiff etc or whatever client needs
Hide or quit ACR
Go to folder where CR2 & sidecar files are.
Select all, drag drop onto DNG converter
Press convert
I run this workflow only so it frees up ACR for further editing (say on a different job)
Some jobs run into hundreds of final images, so efficiency is key.
ACR works while the DNG converter is working (on other files) in the background.

Develop Settings Not Transferring to Lightroom CC

Dear support,
I just upgraded my catalog from LR 5.7 to LR CC. The develop settings in LR 5.7 (i.e. exposure, white balance, etc.) are all zero values in LR CC. I have thousands of photos. There's no way I want to re-enter all my settings for each photo. Is this a bug in LR CC?
Wade

Are you able to confirm that you've done a direct comparison using the same image between the LR5 and LRCC catalogs? If you followed the normal upgrade method, having all develop settings reverted to the default zero positions is extremely unusual....in fact this is the first time I've heard of it, hence my puzzlement. If possible, could you show us a screenshot of such a comparison, showing the sliders in the Basic panel and the contents of the History panel for the same image in both catalogs? It would help us try to figure out what's happened here.
After that, I guess the next logical thing to try would be to run through the upgrade process again, but maybe save that thought for later. Let's see if we can figure our way through this.
Your reference to the XMP data is interesting. Did you have "Auto write to XMP" enabled in the LR5 catalog settings?

Photos not transferring through wifi from iPhone to iCloud or Photos

I'm partly through a very slow migration to Photos, quite possibly related to being on a very slow and throttled ISP connection. Apparently not much I can do about that … I suspect much of the problem is related to having too many large videos in my slimmed-down Aperture library …
My issue here is that not a single photo has migrated automatically from my iPhone to either iCloud Photos (as seen through the online portal) or to Photos on my iMac.
I can synch photos by plugging my iPhone 6+ into my iMac. But I want the photos to transfer through wifi …
(I've updated everything to the latest version of software, and have lots of open space.)
I'm frustrated by Photos, yet willing to let my photos transfer completely to Photos and the iCloud to see if it actually turns out to be usable. I like the aspect of having my photos summarized on my iPhone — though I'm not sure I actually will use that feature.
Aperture works much better as a cataloguer for me — I may return …

If you are saying that you are waiting for photos that you have taken on your phone to transfer to the photos application on your Mac using the iCloud photo library whilst you are loading photos from the photos application on your Mac to the iCloud photo library, Then yes I believe you will have to wait.

Infotype 105 and 0006 not transferred through ALE

Hi all,
I am sending organisation data (infotype 1000, 1001, 1002, 1003, 1008) & personal data (infotype 0000, 0001, 0002, 0006, 0105) from one SAP system ( ECC 5 ) to another ( ECC 6 ). using ALE and i used message type HRMD_A and idoc type is HRMD_A06 , in that process all my infotype data in moving properly except infotype 0006 and 0105. i am getting IDOC status 52 ( Application document not fully posted) in receiving system. both the infotype (0006,0105) has subtype & i have included respective subtype in distributed model.
can any one tell what could be reason. pleasae help
Thanks,
Madhu

solved by own.

Sound settings not sticking through reboot after 10.6.2

Since 10.6.2, my sound preferences are not sticking and always default to "internal speakers" on my MacPro1,1. I tried running the combo updater without success. Any other ideas?
Thanks.

check another forum topic for potential answer:
http://discussions.apple.com/thread.jspa?threadID=2160114&tstart=0
I had the same problem and fixed mine. Others have fixed theirs too trying different methods discussed there.
Good luck.

9 Box Grid Settings are not availaible through admin console

Hi ALL,
We are implementing Nakisa 3.0 SP1 here. While configuring Succession Planning, for Employees, 'Grid' option is not availaible through Administration Console. However the same is availaible for End USer under Employee>>Grid.
If I understand it correctly, this 'Grid' talks about Talent Management 9 Box Grid i.e. why 'Performance' & 'Potential' are given as X & Y axis.
Is this done for a purpose? If this is the case, how to configure settings for Grid?
Thanks,
Prashant

Hi Prashant,
Grid settings can only be made in the XML files. You can make several changes in the XML file to affect various grid settings, which I have done at a few clients. You need to look for the listing configuration called DirectoryListing1_With_NineBox.xml.
Best regards,
Luke

My Ipad got switched off while file transfering through bluetooth and not switching on

My Ipad got switched off while file transfering through bluetooth and not switching on

If your iPad is not switching on then try a reset : press and hold both the home and sleep buttons for about 10 seconds when the Apple logo should appear (you won't lose any content, it's the iPad equivalent of a reboot).

Price from MDM is not transferred to shopping cart in EBP

Hi all,
we are implementing MDM 2.0/SP2 for SRM. Actually the catalog content is fully available, the only problem is that I don't get the price from catalog into shopping cart via OCI. When I browse through catalog coming from EBP every price in MDM-shopping cart (WEB UI) is displayed correctly. When I transfer the articles from MDM-shopping cart to EBP every field is transferred correctly except price. When I test with Fiddler I also don't see price coming in, and I also don't see any system message in system log SLG1 of EBP.
These are my settings:
Price in MDM data manger like:
     Price Information: 1| |AVL Graz|12.14| Euro
OCI:
NEW_ITEM-PRICE            Price Information -Amount (not transferred)
NEW_ITEM-CURRENCY    Price Information - Currency (transferred correctly)
NEW_ITEM-PRICEUNIT     Price Information - Price Base Quantity (transferred correctly)
Did you guys have a similar problem before?
Best Regards Thomas

Hey Thomas,
As specified by u can see items with their prices in the Data Manager as well as in the Shopping cart but not on EBP side.
These were the settings u had specified:
OCI Mappings:
NEW_ITEM-PRICE Price Information -Amount (not transferred)
NEW_ITEM-CURRENCY Price Information - Currency (transferred correctly)
NEW_ITEM-PRICEUNIT Price Information - Price Base Quantity (transferred correctly)
Please do check wether the items which u r purchasing is having all the values populated.
Bcoz as given u havnt specified Orderunit field and Minimum Quantity UOM.
As per my understanding to purchase any item, and take it onto the EBP side with its price the Orderunit field must be populated with Unit of Measure.
After inserting values in Order unit and Minimum Quantity UOM then go and check wether its price is taken from the Shopping cart to the EBP.
Please check it will work
Do let me know
Hope dis helps u
Regards Tejas...............

Changes to order are not transferred

Hi,
our PPDS users are facing an issue in Product Planning Table ( transaction /sapapo/ppt1).
When we create a planned order and convert to production orders, the system converts with out any issues.
After some time when we drag the production order to a new time ( in DS board), fix the order, then when we save, we get the message " Changes to order 100065265 are not transferred" and the order moves back to where it was... The # 100065265 is our production order in created status.
Looking at the error details, I thought there are some changes to the order being done in R/3, but there were no changes to that order in R/3 at that point and the same change, if done after some time goes through...
This is happening almost for every order and it's annoying to keep click ok on this order, wait and then reprocess again...some time we get the error multiple time before the system accepts the changes...
Any idea on what might be happening?
More details about the error,
===
Changes to order 100065265 are not transferred
Message no. /sapapo/cdpssimulati015
Diagnosis:
The changes made to the order 100065265 in SAP APO can not be transferred as the order has already been changed by the linked R/3 system
System Response:
If you have made minor changes to an order in SAP APO and changes to this order are simultaneously being transferred from the R/3 system, only the changes from the R/3 system are adopted. The changes you made to the order manually in SAP APO are lost
In technical information, I see the application area as /SAPAPO/SIMULATI, MESSAGE # 015 and main program SAPLSHL2.
Thanks,K

Hi,
It seems the production order details are getting updated in ECC with order related settings you maintained at ECC, like settlement profile, etc., During that time, if you try to change the production order in APO, since the ECC update for the order is not yet completed, it gives the error. Thats why after sometime, when you change the production order, it allows you to change.
Please try this, once you convert the order in APO, go to ECC and try to open the order in CO02 or CO03, it will give you an error the order is already being processed by XXXX. If so, then it is the time taking to update the production order in ECC.
Also, try this, once you convert the order, immediately save and after sometime you change the time.
Please check and revert.
Regards,
Manimaran M.

Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred

Hi All,
I have done a BADI implementation for ME_PROCESS_PO_CUST and when I try to convert a PR to PO using ME59N in ECC u2013 AFS System I am getting below error message.
Data from Business Add-In ME_PROCESS_PO_CUST not transferred.
I am trying to populate certain PO fields ( ekko and ekpo ) from PR fields. But the above error occurs when I update the Ex Factory Date manual that is EKPO-J_3AEXFCM.
I am updating this in the method PROCESS_ITEM and what I found while debugging is in the class CL_PO_HEADER_HANDLE_MM, in the implementation of IF_FLUSH_TRANSPORT_MM~START, the contents of field u2018my_iteration_countu2019 keeps increasing and becomes 10 and raises this error.
I read few of the related questions raised by others in this forum and understood that this can happen if I try to change the field that is disabled ( greyed) in ME22N. But this field that I am talking about is enabled.
I also tried to move my code of populating the field EKPO-J_3AEXFCM from the PROCESS_ITEM to the enhancement point just above the user exit EXIT_SAPMMO6E_018 but still it doesnu2019t resolve the error.
(We donu2019t want to use User Exit and hence we are trying with BADIs or enhancement point.)
Can anyone please help me with this. I also found an OSS note 1334046 but not sure if that can resolve my issue.
Thanks in advance.
Ameesha.

Hi Ameesha,
i think u need to implement the BADI ME_PROCESS_PO_CUST in SPRO settings.
SPRO>Purchasing>Business Add-in Purchasing-->BAdI: Enhance Processing of Enjoy Purchase Order
try this once.
All check this link.
[Error Message: Data from Business Add-In ME_PROCESS_PO_CUST not transferred;
Hope it helps.
Regards,
Raj

Why can't i add playlists to my iPhone from my mac while they are connected? I keep getting the following message "some items (meaning all of them) were not transferred because iTunes match is enabled." This is incredibly frustrating.

I keep getting the following message "some items (meaning all of them) were not transferred because iTunes match is enabled." when I try to drag and drop a playlist, song, or album to my iPhone. This was NEVER a problem before iTunes match or the last iOS update. So what is the deal? Why can't i just add music to my phone from the mac? There is space on the phone. The only way I have found to get the music i want to the phone is to have it download from the phone. This is not something i want to have to do: go through and manually add every album and recreate a playlist on the phone when its there on the mac. And, even more irritating, since the new update, when the phone is plugged into the mac i can't actually view from the mac what music is on the phone. This is incredibly frustrating and any help would be much appreciated in managing my music libraries for each device.

Hi,
You cannot manually manage music with match turned on on your iOS device. If you want to manage music manually, you will need to turn off match on your iPhone.
Jim

HT204053 I have a problem. I bought Pages and Numbers for my iMac and so far everything was OK. Suddenly i have a problem with connection to iCloud. Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded in iCloud.

I have a problem.
I bought Pages and Numbers for my iMac and so far everything was OK.
Suddenly i have a problem with connection to iCloud.
Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign (small shape of iCloud), that they are waiting to be uploaded to iCloud.
I think the iCloud is OK.
i can see and manage documents in iCloud. i can create them on iPad and see them and delete them in iCloud.
But not on iMac.
i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….

I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!

Settings not transferring through qmaster.

Similar Messages

Maybe you are looking for