Settling Rebate Agreements with Validity Start Date not Start of the Month

Hello Experts,
I am currently trying to settle a rebate agreement with validity dates November 20, 2011 to December 31, 2011. However, after the credit memo is created, I noticed that the Service rendered date is today's date, but I expected it to be the same as my Settlement Date = November 30, 2011 (a month-end). Please advise if this is normal. If not, please advise how to correct the automatic entry of dates.
Thanks,
M

Hi
Kindly let us know what is the rebate agreement type that has been used for which you are facing problem and for which rebate agreement type you are getting the month end date.Check wheather scale basis is B(Value scale) has been maintained or not for the rebate agreement for which you are getting problem.So check the differences between the two rebate agreement types.As The service rendered date of the invoice line item is used to determine the validity of a rebate condition record
Regards
Srinath

Similar Messages

  • User disabled until start date not getting ROs provisioned via AP

    Here's the situation: I have a user in OIM that is disabled until start date. When the start date rolls around, and the job "Enable User After Start Date" runs followed by "Evaulate User Policies," the user is correctly enabled and the correct role gets assigned but the access policy associated with that role does not appear to get triggered so the APs resources are not assigned. However, if a user is entered the same way (via HR recon) but is on or after its start date, then the role gets assigned, the access policy fires, and the ROs are provisioned just fine.
    I have noticed that if a user is moved from disabled to enabled, then the membership rules fire and any roles associated with the rules get assigned but in the DB the field USR_POLICY_UPDATE remains null. If I update that field with a '1' and re-run "Evaluate User Policies," the resources are provisioned correctly.
    I am wondering if anyone has seen this before or has a suggestion as to how to resolve this.
    Thanks,
    Stephen

    Thanks for the suggestion. As it turned out, I did not have Retrofit checked but unfortunately that did not resolve the issue. The behavior remained the same after checking and re-running 'Evaluate User Policies'.
    I may have a workaround for this issue that I am in the process of implementing. I'm creating a job that will run right before 'Enable User After Start Date' that will update the USR_POLICY_UPDATE field to'1' if the status of a user is 'Disabled Until Start Date.' Then the user will get enabled, assigned the appropriate roles via rules, and 'Evaluate User Policies' should run and now find this user and apply the access policies.
    Anyway, seems like there should be a simpler answer so I'll keep checking here if anyone has one. I'll also update if the above workaround works.
    Thanks,
    Stephen

  • Error AA168 Ord.dep.start date not allowed in dep.area 60 (Please correct)

    Hi experts,
    We upgraded to ECC6 from 4.7 version last month.
    For some assets we have start deprecation date filled for area 60 with deprecation key LINV.
    We would like to modify deprecation key to 0000 but we have error "AA168 Ord.dep.start date not allowed in dep.area 60 (Please correct)"
    Have you any idea to resolve this issue.
    Thank you in advance
    Kind Regards.

    Dear Shankar
    here is what i have in transaction
    001     01/01/02/02          01     01     02     02
    002     01/01/01/01          01     01     01     01
    003     01/06/02/02          01     06     02     02
    004     06/06/02/02          06     06     02     02
    i do not anderstand any thing in this transaction
    Can you help me resolving this issue?
    Thanks in advance.
    Kind regards

  • Working with Validation of Data

    Hi. VC Experts.
                             I am currently working with VC 6.0. Where I am working with Validation of Data.
    we have fields like Emp, Earea, Joining date (month & Year),  Ending date((month & Year) etc.,
    Here we have one push button 'select'.
                         Here what my client asks is unless and until, user fills all details then only
    the submit but should be enabled. Otherwise submit button should be in disable mode.
    I could be able to write formula for 'submit' button's properties( Disable) like this.
    BOOL(IF(LEN(@Emp_code)<>0 AND  LEN(@Earea)<>0 AND LEN(@Edept)<>0 AND DSUB(DVAL(@Joining_date), DVAL(@Ending_date),'D')<0 ,false,true))
                     Here condition is always make sure that 'Joining date' should be greater than 'Ending date' .  where it is working fine for all fields except Calender Year month(Joining date & Ending date).
                                the calender year month format is  Example : """" May 2007""""
    But it is considering only month But not year.
                  Can you kindly provide your inputs.
                                                                                 Thanks & Regards

    Hi Vijay,
    sorry
    please rewrite the formula for the button disable as::
    NOTE:: in the formula i have used '<''>'  which nothing but a lessthan symbol and greater than symbol without single quotes (i.e. not equal to)
    BOOL(IF(LEN(@Emp_code) '<''>'0 AND LEN(@Earea)'<''>'0 AND LEN(@Edept)'<''>'0 AND DSUB(DVAL(@Joining_date), DVAL(@Ending_date),'D')<0 ,false,true))
    and make sure you have placed the date picker UI controls for your date functionality.
    this will not work for calender UI control on the form.
    and othe important point is the joining date should be less than ending date then only the button will be enable..
    if you want your joining date should be greater than ending date then write the formaula like this::
    BOOL(IF(LEN(@Emp_code)<>0 AND LEN(@Earea)'<''>'0 AND LEN(@Edept)'<''>'0 AND DSUB(DVAL(@Joining_date), DVAL(@Ending_date),'D')>0 ,false,true))
    i tried this
    its working for me
    Regards
    Srinivas

  • X-distr.chain status in combination with valid from date

    Hello I am using MM02 X-distr.chain status in combination with valid from date, to give materials a certain status in the sales order depending on the delivery date of the orderline.
    How can I enter multiple statuses with future validation dates?
    example following status with validation dates where entered in MM02 for a material
    - material should have status A valid from January
    - material should have status B valid form April
    - material should have status C valid from July
    - material should have status D valid from September
    When I enter a sales order with delivery date in January system replies with status C.
    When I enter a sales order with delivery date in April system replies with status C .
    When I enter a sales order with delivery date in July system replies with status C .
    When I enter a sales order with delivery date in September system replies with status D.
    So only the current  ( or previous status when current is not valid yet) is retained by the system.
    How could multiple statuses be used?
    Thanks in advance
    Joos

    Hello Jalo,
    Thanks for your reply,
    My customer sell season relevant materials so they want to control order entry and delivery creation based on predefined dates.
    Status A  = material is blocked for order entry and delivery creation
    Status B  = material is allowed for order entry, delivery creation is blocked
    Status C  = material is allowed for order entry and delivery creation.
    Status D  = material is blocked for order entry, delivery creation is allowed.
    I had hoped to use standard functionality with this status field, it meets most of my customers requirements but at this moment the only alternative is to create a new table where this data can defined and create some abap logic in the user exit to set the status base on the table information.
    Regards
    Joos

  • I just downloaded and installed the new iTunes on a Toshiba Satelite of some age. It was just completely reformated and updated with XP. iTunes will not open. The terms page comes up and when I agree it disappears. I have uninstalled and reinstalled.

    I just downloaded and installed the new iTunes on a Toshiba Satelite of some age. It was just completely reformated and updated with XP. iTunes will not open. The terms page comes up and when I agree it disappears. I have uninstalled and reinstalled.

    Perhaps something here will help:
    http://support.apple.com/kb/TS1421
    Regards.

  • Please put a cost object with valid JV data for GL accoutnt (line 001)

    Dear All,
    When the user is trying to post ASKBN, They are getting an error saying "Please put a cost object with valid JV data for GL accoutnt (line 001)"
    So we tried to look up the error, and the WBS, Cost center, profit center and JVA details are all available in place. Still cant understand why this error comes. And why the system is asking to put JV details when they are available.
    On checking, WBS has an AUC and AUC has the cost center which has the JV details and PC details. So I think everything is in place.
    Can someone help please and let us know if we are missing anything else that needs to be checked ?
    Thanks,
    Hari Dharen

    Dear Hari Dharen,
    if something else in missung you'll get a error message if you run ASKBN in testmodus.
    regards Bernhard
    Edited by: Bernhard Kirchner on Oct 5, 2010 8:55 AM

  • SBL-DAT-00320: The specialized method 'Start' is not supported in the imple

    Hi.
    I have a problem. I can´t enter to siebel eCustomer for CME, looking for in the logs I found this message "The specialized method 'Start' is not supported in the implementation". I think this is because there is a workflow that is wrong.
    also, there are lovs that don´t have values, or the query don't find datas.
    Please, I need help.
    Siebel eCustomer 8.1.3
    novice

    Hi everyone
    I have the answer
    We did some personalization rules, and this rules was wrong, so we desactivate and that was the solution.

  • "A valid repository does not exist at the specified connection" when connecting

    Hi all,
    I'm using ODI 11g and Oracle Database 11g EE.
    I've installed ODI without any errors, and chose to skip repository configuration during installation.
    I created the Master and Work Repositories with the RCU that was provided in the same media pack as the ODI installation files.
    After starting ODI, clicking "Connect To Repository..." and inputting the correct credentials I get the following error:
    A valid repository does not exist at the specified connection...
    http://pastie.org/pastes/8081847/text?key=grna09suyra4w0vgitbxiw
    Has anyone had this error before, can anyone help?
    Thanks!
    Josh.

    Josh,
    Looks like the RCU did not create the repository in the intended schema for some reason. you can check the schema for the ODI tables (SNP_*) presence.

  • 'ServerProperty' with 'Name' = 'Language' does not exist in the collection

    LS,
    One of my customers (using ssas 2012) is facing collation issues which result in missing facts in the cubes. I suggested them  to have a look at the Analysis Server Properties. Howevere, on selection of the Analysis Services Properties page 'Language-Collation',
    it doesn't open the page showing the properties, but instead the following message pops up:
    'ServerProperty' with 'Name' = 'Language' does not exist in the collection
    Any ideas on what could have caused this and how it can be fixed ?
    We're considereing a restart of the SSAS server, but need to be very carefull because it's their production environment.
    Appreciate your help,
    Kind regards,
    Cees
    Please remember to mark replies as answers or at least vote helpfull if they help and unmark them if they provide no help.

    I am also experiencing this error when clicking on the Language/Collation page of the Analysis Services Properties dialog.
    I suspect this is causing some other strange behavior such as an "invalid characters in hierarchy names" error when deploying an SSAS database, when the same solution/project can be deployed successfully from other machines. In that case, there are parenthesis
    in the attribute name but no user-defined hierarchies. Error:
    Errors in the metadata manager. The name, 'Project ID (Description)', for the cube hierarchy is not valid because this name is a reserved word, contains one or more invalid characters (.,;'`:/\*|?"&%$!+=()[]{}<>), or is longer than 100 characters.
    I would like to avoid having to re-install SSAS if at all possible. Any help is much appreciated.
    LB

  • Start date should be after the dd.mm.yyyy or later error message.

    We have recently applied HR support packs 46 to 51 and now when updating Personal Data (IT0002), Bank Details (IT0009) or Addresses (IT0006), the following error message is displayed 'Start date should be after the 07.02.2010 or later'. Where the screens allow for a future date to be entered we have done so, but the same error message appears.
    Has anyone encountered this problem after apply support packs?
    Jason

    Hi,
    Check what is the date maintained in table V_T569R.
    With Reagrds
    Shyam V

  • Adobe captivate data not sending at the end of webinar. Is the adobe server still down?

    Adobe captivate data not sending at the end of webinar. Reads "unknown error." Is the adobe server still down? This has been ongoing all of july 2014.

    So the engineer came and, of course, everything was working ok. He did fit some kind of RF filter on my main socket, and 'changed the pair' on one of the outside cables. Since then, I've only had a noisy line once, and seem to have been connected for 3 days solid, which is a record!
    I've switched back to my BT Home hub 3, which guavas me more stats. The line has previously given me up to 6mb/s, now only getting 1.6.
    Do you think, now the line seems more stable, with the stats below I should be able to maintain a higher speed now?
    Thanks
    Line state: Connected
    Connection time: 3 days, 02:19:39
    Downstream: 1.601 Mbps
    Upstream: 444.9 Kbps
    ADSL Settings
    VPI/VCI: 0/38
    Type: PPPoA
    Modulation: G.992.3 Annex A
    Latency type: Interleaved
    Noise margin (Down/Up): 17.7 dB / 22.6 dB
    Line attenuation (Down/Up): 44.8 dB / 27.0 dB
    Output power (Down/Up): 18.6 dBm / 12.6 dBm
    FEC Events (Down/Up): 3144673 / 0
    CRC Events (Down/Up): 14434 / 38
    Loss of Framing (Local/Remote): 0 / 0
    Loss of Signal (Local/Remote): 0 / 0
    Loss of Power (Local/Remote): 0 / 0
    HEC Events (Down/Up): 111873 / 10
    Error Seconds (Local/Remote): 1011 / 4

  • The property with ID SI_FILES does not exist in the object

    Hi,
    We are accessing the BO reports through front End web application using WEBI. We are using BO Java SDK on the application for this purpose.
    Some of our users (APAC region) has started getting the error while accessing the reports from web application. Here are the error:
    com.crystaldecisions.sdk.exception.SDKException$PropertyNotFound: The property with ID SI_FILES does not exist in the object [24/01/12 13:27:39:402 GMT] 000000b6 SystemErr R at com.crystaldecisions.sdk.occa.infostore.internal.ag.getFiles(Unknown Source)
    [24/01/12 13:27:39:402 GMT] 000000b6 SystemErr R at com.crystaldecisions.sdk.occa.infostore.internal.AbstractSendableObject.getFiles(Unknown Source)
    Same report when accessed by the users from AMER or EMEA region, it is working fine. Can anyone help me what is the issue and how to resolve it?
    Thanks,
    Ashok

    what version of Enterprise is this? XI 3.1, Bi 4.0? Also what version pack are you running. I am asusming that APJ and EMEA\AMER users try to hit the same web\app server\ BOE, same application and access same reports. What kind of authentication you use? Given everything else is same it's got to be security issue? Does APJ users are part of a different group in your 3rd party auth server such as LDAP or AD?
    Edited by: Aasavari Bhave on Jan 25, 2012 2:55 PM

  • CDs I burn from my itunes 10 on my macbook with snow lepard will not play in the regular cd player.  How do I burn Cds that will pay in a reg old cd player?

    CDs I burn from my itunes 10 on my macbook with snow lepard will not play in the regular cd player.  How do I burn Cds that will pay in a reg old cd player?

    When the computer was new, I had the same issue I have now.  It was new and I could not burn to play on a reg cd player. Today, I can not burn to play on a reg cd player. Inbetween, I could not burn to play on a reg cd player.  I keep giving up and then trying months later.
           I have recently made the cds that play on the computer.  I have also tried in the last month to make a dvd copy, it played.  I have gone to people's homes and tried the cd's burned in my computer. They are not recognized.  This last round I have only used the cd-r but have tried many others in the past. I am running out of money to keep buying different brands, kinds, etc.  I figured it must be my lac of knowledge and am trying to get some new here. 
    Sincerely,
    Paul

  • How do i finish a download that was already started and not finished because the library closed befo

    how do i finish a download that was already started and not finished because the library closed before it done

    What are you trying to download and how were you downloading it?

Maybe you are looking for