Please put a cost object with valid JV data for GL accoutnt (line 001)

Dear All,
When the user is trying to post ASKBN, They are getting an error saying "Please put a cost object with valid JV data for GL accoutnt (line 001)"
So we tried to look up the error, and the WBS, Cost center, profit center and JVA details are all available in place. Still cant understand why this error comes. And why the system is asking to put JV details when they are available.
On checking, WBS has an AUC and AUC has the cost center which has the JV details and PC details. So I think everything is in place.
Can someone help please and let us know if we are missing anything else that needs to be checked ?
Thanks,
Hari Dharen

Dear Hari Dharen,
if something else in missung you'll get a error message if you run ASKBN in testmodus.
regards Bernhard
Edited by: Bernhard Kirchner on Oct 5, 2010 8:55 AM

Similar Messages

  • Multiple delivery schedule (with same delivery date) for same PO line item

    Hi All,
    In a STO, for a PO line item say for 10 quantities. I have been receiving 3 delivery schedule with the same day with quantities say 5 3 2. I would like to know the what would be possible reasons for this.
    Regards,
    PSS

    Hi PSS,
    I had the similar issue there is a report which gives you the reason for delivery split
    Please refer to the following thread
    Multiple deliveries created
    Thanks
    Diwakar

  • Can you please put me in touch with the support  for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have  been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.

    Can you please put me in touch with the support  for the trial copy of adobe acrobat XI pro which I had tried out on March 15 for 30 days. I have  been trying to cancel since the cost is too much and Acrobat Reader is OK for me. I can't find uninstaller.
    I have had to erase my disk since then with trouble with Apple Store not recognising my machine and the reload from Time Machine has given complications . Can you please cancel my trial and return my Trial money.

    If you paid for what you used then it was not a trial.
    Look thru the following links and use the chat option if required for your situation:
    Cancel your membership or subscription | Creative Cloud
    https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
    https://forums.adobe.com/thread/1703848
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Working with Validation of Data

    Hi. VC Experts.
                             I am currently working with VC 6.0. Where I am working with Validation of Data.
    we have fields like Emp, Earea, Joining date (month & Year),  Ending date((month & Year) etc.,
    Here we have one push button 'select'.
                         Here what my client asks is unless and until, user fills all details then only
    the submit but should be enabled. Otherwise submit button should be in disable mode.
    I could be able to write formula for 'submit' button's properties( Disable) like this.
    BOOL(IF(LEN(@Emp_code)<>0 AND  LEN(@Earea)<>0 AND LEN(@Edept)<>0 AND DSUB(DVAL(@Joining_date), DVAL(@Ending_date),'D')<0 ,false,true))
                     Here condition is always make sure that 'Joining date' should be greater than 'Ending date' .  where it is working fine for all fields except Calender Year month(Joining date & Ending date).
                                the calender year month format is  Example : """" May 2007""""
    But it is considering only month But not year.
                  Can you kindly provide your inputs.
                                                                                 Thanks & Regards

    Hi Vijay,
    sorry
    please rewrite the formula for the button disable as::
    NOTE:: in the formula i have used '<''>'  which nothing but a lessthan symbol and greater than symbol without single quotes (i.e. not equal to)
    BOOL(IF(LEN(@Emp_code) '<''>'0 AND LEN(@Earea)'<''>'0 AND LEN(@Edept)'<''>'0 AND DSUB(DVAL(@Joining_date), DVAL(@Ending_date),'D')<0 ,false,true))
    and make sure you have placed the date picker UI controls for your date functionality.
    this will not work for calender UI control on the form.
    and othe important point is the joining date should be less than ending date then only the button will be enable..
    if you want your joining date should be greater than ending date then write the formaula like this::
    BOOL(IF(LEN(@Emp_code)<>0 AND LEN(@Earea)'<''>'0 AND LEN(@Edept)'<''>'0 AND DSUB(DVAL(@Joining_date), DVAL(@Ending_date),'D')>0 ,false,true))
    i tried this
    its working for me
    Regards
    Srinivas

  • 0CO_PC_01 Cost Object Controlling: Plan/Actual Data

    Hi Experts
    I have a question regarding Cost Object Controlling: Plan/Actual Data (0CO_PC_01). I know nothing about the R/3 processes and tcodes behind this datasource.
    For a given material and a given plant do I only get records with VTYPE(Value type for Reporting) 10, but I do not understand why - I need VTYPE = 70.
    I therefore hope:
    1. That somebody could provides input on why I only get VTYPE = 10 and how I get 70 instead.
    2. That somebody can tell me the tcodes behind this datasource on the R/3 side.
    Thanks and kind regards,
    Torben

    Hi Mr. V.
    Thanks a lot for the input.
    The problem is that we have got VTYPE 30 (target) for some materials, but not for specific material A and we really do not understand why. Do you know how I can verify if the variance is present for the given material A in R/3?
    Thanks and kind regards,
    Torben
    Edited by: Torben Pedersen on Apr 3, 2009 12:00 AM
    Sorry, it is VTYPE 30 i need, not 70 as stated by mistake at first.

  • X-distr.chain status in combination with valid from date

    Hello I am using MM02 X-distr.chain status in combination with valid from date, to give materials a certain status in the sales order depending on the delivery date of the orderline.
    How can I enter multiple statuses with future validation dates?
    example following status with validation dates where entered in MM02 for a material
    - material should have status A valid from January
    - material should have status B valid form April
    - material should have status C valid from July
    - material should have status D valid from September
    When I enter a sales order with delivery date in January system replies with status C.
    When I enter a sales order with delivery date in April system replies with status C .
    When I enter a sales order with delivery date in July system replies with status C .
    When I enter a sales order with delivery date in September system replies with status D.
    So only the current  ( or previous status when current is not valid yet) is retained by the system.
    How could multiple statuses be used?
    Thanks in advance
    Joos

    Hello Jalo,
    Thanks for your reply,
    My customer sell season relevant materials so they want to control order entry and delivery creation based on predefined dates.
    Status A  = material is blocked for order entry and delivery creation
    Status B  = material is allowed for order entry, delivery creation is blocked
    Status C  = material is allowed for order entry and delivery creation.
    Status D  = material is blocked for order entry, delivery creation is allowed.
    I had hoped to use standard functionality with this status field, it meets most of my customers requirements but at this moment the only alternative is to create a new table where this data can defined and create some abap logic in the user exit to set the status base on the table information.
    Regards
    Joos

  • How to get XLR to show BPs with no transaction data for a given date range

    Hi -
    I am building an XLR report that does a comparison of net sales data across two periods for a given sales employee's BPs.
    The report has the row expansion:
    FACT BPA(*) SLP(SlpName = "ASalesPersonNameHere") ARDT(Code = "ARCreditMemo", "Invoice") Group by BPA.CardName
    and column expansions:
    FIG(SO_TaxDate = @StartDate:@EndDate)
    and
    FIG(SO_TaxDate = @StartDate2:@EndDate2)
    where @StartDate, @EndDate, @StartDate2, @EndDate2 are parameters that define the two ranges of dates.
    The column formulas are, from left to right:
    =ixDimGet("BPA", "CardName")
    =ixGet("SO_DocTotal")      <-- filtered by column expansion for first date range
    =ixGet("SO_DocTotal")      <-- filtered by column expansion for second date range
    The report works fine except for one problem, I would like it to include BPs for which no transaction occurred in either date range as well.
    Any help is greatly appreciated!
    Thanks,
    Lang Riley

    Really appreciate your feedback!  Those are good suggestions. I should have mentioned that I had already tried both those suggestions.
    Removing FACT on BPA in this case ends up returning all the BPs and not respecting the SLP(SlpName = "aName") part of the query. 
    Using **, i.e., * or #NULL, makes no change in the resulting data in this case.  I had thought that ** would be the solution, but it didn't change the outcome.  I still have BPs for which when their sales employee is used as the filter and they have no transactions for either date range, and yet they still do not appear. 
    I should further mention that the IXL query, as it now stands, does return BPs for which one of the periods has no data, just not both, and I have verified that applicable BPs with no transaction data for both periods do exist in my data set.  It seems that perhaps the IXL query needs to be restructured?  Please keep the suggestions coming including how this query might be restructured if necessary.

  • IDOC BOMMAT: Wrong validity-from dates for components

    Hi all,
    I am currently loading BOMs via IDOC BOMMAT for a data migration project. Unfortunately I am having problems to load the BOMs with the correct validity-from date for components. The data is correct when I check in LSMW, but after the load of the IDOCs the validity-from date of each component is the same as the validity date of the BOM header!
    System Version is SAP 4.7.
    Thanks for your help and Best Regards
    H.

    Has anybody any ideas?
    Thanks a lot!

  • 'Valid to' dates for both the Header & the components in the BOM report.

    Hi Experts,
    My Requirement:
    Need to display the 'Valid to' dates for both the Header & the components in the BOM report.
    Right now we are using the Functional modules 'GET_STKO' & 'GET_STPO' for the header
    & the components respectively. The report gives the correct output for the all the BOM alternatives
    which exist. But for the BOM alternatives which have been deleted(updated in STKO-LKENZ)
    'Valid to' dates are displayed as'00/00/0000'.
    (Note:ECM is used for BOMs)
    Is there any Logical Database that I can fetch the 'Valid to' dates of both BOM Header & components
    which are deleted?
    Regards,
    Mahesh

    Dear Mahesh,
    In my understanding I dont think you cannot get the valid to date for BOM header,unless a ECN,(engineering change number) is
    used to set the deletion flag.In otherwords none of the business sets for all these BOM's the valid to date(which means the
    default valid to date 31.12.9999 is taken).
    Check with this FM, CS_BOM_EXPL_MAT_V2 whether can you get the valid to date for the components(infact here also the
    valid from date given in the input screen impacts the report output).
    Check and revert back.
    Regards
    Mangalraj.S

  • Valid to date for BOM Header and Item

    Hello everyone,
    I have been searching for "valid-to" date for BOM header and Items since several days but no luck ..
    I know we can see it using transactions cs11/cs03 etc. But i wish to know the table where they are stored. As I need to extract them to BW.
    Any help will be highly appreciated.
    Thanks in advance!
    Regards,
    Anuj

    Hi Anuj
    In table STPO,the field AEDAT gets updated only when a change number is used,otherwise the valid to date will be shown nil here.
    And also ref the link
    Problem finding Valid To Date or Change number to on BOM
    pavan

  • Please recommend any app to set up heath data for iPhone 6+

    please recommend any app to set up heath data for iPhone 6+

    See "Interactive Notifications ..." here:
    http://www.apple.com/ios/whats-new/design/

  • Comprehensive report of Cost Object with Cost elements

    Hi,
    I am in search of such report that shows amounts against cost elements that is grouped by cost centre with cumulative amount. Any idea of such program/transaction?
    In JVA there exists such report with transaction GJRG_5J1B but it only shows such values that have joint venture documents.
    Thanks in advance
    Regards

    Thanks for your reply.
    Yes, there are many standard reports that I found but there options are not what I am in search of. Actually what I need is to have cost elements with amounts in current period, current year and date of inception, i..e 4 columns. All total of which is being shown in the last row, which is grouped by Cost Centre. Like in your mentioned report, the limitation is it can view single fiscal year.
    Hope you would be helping in this regard.
    Thanks n Regards
    (Points are assigned )

  • Settling Rebate Agreements with Validity Start Date not Start of the Month

    Hello Experts,
    I am currently trying to settle a rebate agreement with validity dates November 20, 2011 to December 31, 2011. However, after the credit memo is created, I noticed that the Service rendered date is today's date, but I expected it to be the same as my Settlement Date = November 30, 2011 (a month-end). Please advise if this is normal. If not, please advise how to correct the automatic entry of dates.
    Thanks,
    M

    Hi
    Kindly let us know what is the rebate agreement type that has been used for which you are facing problem and for which rebate agreement type you are getting the month end date.Check wheather scale basis is B(Value scale) has been maintained or not for the rebate agreement for which you are getting problem.So check the differences between the two rebate agreement types.As The service rendered date of the invoice line item is used to determine the validity of a rebate condition record
    Regards
    Srinath

  • Error saying cost center/EAT007 validity exists only for 2009

    I am trying to upload the HR details from Non SAP to SAP for 2010, using an interface from T.code se38, I am getting an error saying 
    "Master record for cost center(number)/ EAT007 exists only for 2009".
    When I see the cost center validity in KS02, its validity is from 01.01.2009 to 12.31.9999.
    Could anybody answer this.

    Hi Abhishek,
    I am trying to upload the time sheets of the employees from other software to SAP using the Tcode SE38,
    Later from HR to Co we are using CATs (Cat2 and CAT7) to transfer the data. Time time sheet contais the details of the sales order against which they have spent time, their time consumption for providing services and also the activity type they have performed.
    In SE38, while I am trying to upload the data it shows an error saying "Master record for cost center/EAT007 exist only for 2009".I am trying to upload the data for 2010 Jan to Aug.
    When checked, the Cost center's validity in our system is from 01.01.2009 to 12.31.9999.
    Please assist.

  • Need Sample JPG Files with Valid XMP data

    Greetings,
    I Have downloaded and built the XADumper and would like to "dump" on a JPG file with some VALID XMP data.
    However, I have no application to sutff the data and no sample file that I know has something readable.
    Does anyone have some they could post?
    Even better, anybody have something working to stuff some valid data that can be used to create files -- or better use as a further code example?
    Thanks Much,
    -forrest

    Hi Marc,
    the XMP states (obviously):
    dc:format = "image/jpeg"
    xap:CreatorTool = "Adobe Photoshop CS3 Windows!"
    According to the XMP it is a JPEG file. But your file is corrupted:
    Each JPEG file has to start with a "Start of Image" tag, which is 0xFF, 0xD8.
    Regards,
    Stefan Makswit

Maybe you are looking for