Setup IdM 8.0 with NetBeans 6.1, setRepo issues

It seems like the setRepo command doesn't work.
I'm trying to use the MySQL repo, but it reverts back to
jdbc:hsqldb:hsql://127.0.0.1
What am I missing ?
ps: the javapassion.com tutorials are informative, but I've still got some problems.

It seems this has to be done using Setup.
Best way is to bypass setting up the Embedded Repository, and then run Setup.
Also, it seems to be impossible to clone Repo objects, but if you start from scratch, which includes a lot of renaming and manual work, then you can build your own custom code base. Maybe someone can confirm this ??
Or make a correction, if I've missed something.
Using NB 6.1 the menu's choices, are grayed out for Open Objects, Download Objects.
In what situations, would these be applicable ? For Localfiles Repo's only or when ?

Similar Messages

How do you setup a remote project with Netbeans 6.1 and IDM 8?

I have been using Netbeans with IDM 7.1 fine, but have now upgraded to IDM 8 and want to use the new Netbeans plugin. However there is no ide-bundle.zip with IDM 8. If you try to connect to IDM 8 using the previous bundle from 7.1 you get a compatability error. Anyone able to give help on this?

I have setup a remote project using the other setting of configuring the repository yourself. I couldn't use the remote method as it requires this file from your localhost file store and as I am using a different machine to run netbeans this wouldn't work. The other method allows you to put in connection information.
I am not sure of the point of the remote method as it doesn't allow what the name suggests.

JBoss Application server setup with netbeans IDE.

Hi All,
I need to configure the JBoss Application server with netbeans IDE. I have tried this scenario,
1) Unzip the jboss-4.2.2.GA.zip into jboss dir.
2) Selected the JBoss Application server 4.
3) And i have set the Installation location like this j:/jboss/jboss-4.2.2.GA. In this i got some problem.
The problem is: Next button did not selected.
Error: provide valid installation dir path.
How to resolve this problem? Can anyone give suggestions for resolving this error?
Its very urgent!!

A couple of things:
1. if you are using SJSAS 9.0 it's Glassfish v1 (not v2 - that's probably for the 9.1 version? I don't know, I'm running 9.0 and installs fine with Gf v1 - thanks for the tip, btw!)
2. as for the domain, just pick the default offered (unless you have some specific requirement) - in any event, it's under the domains/domain1 folder
you can always create a new one and register (it will have its very own folder under /domains) but given that's probably a dev box, I can hardly see the point (and when I did it a long time ago, it was more pain that any human being should be subjected to :-)
Finally, one cannot but wonder why on earth someone (at Sun) developed NB and put Sun Java Application Server (developed at Sun) as one of the options that won't work with SJAS 9.0+ (developed at Sun) but one has to instead choose Glassfish (developed at Sun) and that won't work if one chooses v2 instead of v1 if it's SJAS 9.0 instead of 9.1 (or vice versa)...
Don't these guys test the thingy with THEIR own stuff?
Don't get me wrong, I totally love Sun, and all the good stuff they come up with (NB, SJAS, etc. etc.) but done it properly it would help them to gain market share, now, wouldn't it?

Java 1.4.2 with NetBeans IDE 3.5 - Error Message, please help

Hello, I have downloaded the "J2SE v 1.4.2 with NetBeans IDE v 3.5 Cobundle" for windows.
I ran the install, everything went fine, but when the install finished it said there was an error and to please refer to the log file.
Here is what the log file says:
"Installing J2SDK..."
"Finished Installing J2SDK..."
(Jul 1, 2003 7:53:14 AM), Setup.product.install, com.sun.installer.InstallJ2sdkAction, err, Error occured while installing [0] -> D:\Program Files\j2sdk_nb\_uninst\custom-install.bat "D:\Program Files\j2sdk_nb\install.log" "D:\Program Files\j2sdk_nb\j2sdk1.4.2\" D: "D:\Program Files\j2sdk_nb\_uninst"
Now when I try to run "NetBeans IDE 3.5" I get an error message:
Cannont load jvm.dll
Does anyone know how to resolve this, I have tried uninstalling and re-installing and I get the same problem.
Thanks,
-Mike

Hello, I have downloaded the "J2SE v 1.4.2 with
NetBeans IDE v 3.5 Cobundle" for windows.
I ran the install, everything went fine, but when the
install finished it said there was an error and to
please refer to the log file.
Does anyone know how to resolve this, I have tried
uninstalling and re-installing and I get the same
problem.
Thanks,
-MikeHi Mike,
Even I got a similar error message inspite of trying to re-install atleast 10 times! So I gave up and did this:
1) I downloded J2SE SDK 1.4.2 seperately.
2) I then downloded JPad Pro IDE (latest version).
Now both are working really fine for me. :-) Could'nt be bothered to try again and again.
Its up to you if you want to get the NetBeans installation done but all I wanted was a good IDE and the latest version of the JDK. I have been using it for the last 3 days and it is working perfectly fine!
Regards :-)
Vijay

Tryin to Profile weblogic with NetBeans Profiler, getting jrocke exception

Hi there,
I am using Weblogic 10, and want to profile a web application on it with Netbeans Profiler. But am getting the following exception upon starting weblogic (Please tell a solution......)
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
+.+
CLASSPATH=;C:\bea\patch_wls1001\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\JROCKI~1\lib\to
+;C:\bea\WLSERV~1.0\server\lib\weblogic_sp.jar;C:\bea\WLSERV~1.0\server\lib\weblogic.jar;C:\bea\modules\features\w+
+.server.modules_10.0.1.0.jar;C:\bea\modules\features\com.bea.cie.common-plugin.launch_2.1.2.0.jar;C:\bea\WLSERV~1+
er\lib\webservices.jar;C:\bea\modules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0/lib/ant-contrib.jar;;C
LSERV~1.0\common\eval\pointbase\lib\pbclient51.jar;C:\bea\WLSERV~1.0\server\lib\xqrl.jar;;
+.+
PATH=C:\bea\patch_wls1001\profiles\default\native;C:\bea\WLSERV~1.0\server\native\win\32;C:\bea\WLSERV~1.0\server
+\bea\modules\ORGAPA~1.5\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS+
+32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\CVSNT\;C:\bea\WLSERV~1.0\server\native\win\32\oci92+
+.+
+* To start WebLogic Server, use a username and   *+
+* password assigned to an admin-level user. For *+
+* server administration, use the WebLogic Server *+
+* console at http:\\hostname:port\console        *+
starting weblogic with Java version:
Listening for transport dt_socket at address: 8453
java version "1.5.0_11"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_11-b03)
BEA JRockit(R) (build R27.3.1-1_CR344434-89345-1.5.0_11-20070925-1628-windows-ia32, compiled mode)
Starting WLS with line:
C:\bea\JROCKI~1\bin\java -jrockit -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n
+.compiler=NONE -Xms256m -Xmx512m -agentpath:"C:\Program Files\NetBeans 6.1\profiler3\lib\deployed\jdk15\windows\+
+rinterface.dll=\"C:\Program Files\NetBeans 6.1\profiler3\lib\"",5140 -Xverify:none -ea -da:com.bea... -da:javel+
da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=C:\bea\WLSERV~1.
+.home=C:\bea\WLSERV~1.0\server -Dweblogic.home=C:\bea\WLSERV~1.0\server -Dwli.home=C:\bea\WLSERV~1.0\integration+
ogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.di
ea\patch_wls1001\profiles\default\sysext_manifest_classpath -Dweblogic.Name=AdminServer -Djava.security.policy=C:
SERV~1.0\server\lib\weblogic.policy   weblogic.Server
Profiler Agent: Initializing...
Profiler Agent: Options: >"C:\Program Files\NetBeans 6.1\profiler3\lib",5140<
Profiler Agent: Initialized succesfully
Listening for transport dt_socket at address: 8453
Profiler Agent: Waiting for connection on port 5140 (Protocol version: 8)
Profiler Agent: Established local connection with the tool
Profiler Agent: Unable to get address of JVM_DumpHeap function
+===== BEGIN DUMP =============================================================+
JRockit dump produced after 0 days, 00:00:20 on Thu Aug 28 18:46:28 2008
Additional information is available in:
C:\bea\user_projects\domains\nms_dev\jrockit.3728.dump
C:\bea\user_projects\domains\nms_dev\jrockit.3728.mdmp
If you see this dump, please open a support case with BEA and
supply as much information as you can on your system setup and
the program you were running. You can also search for solutions
to your problem at http://forums.bea.com in
the forum jrockit.developer.interest.general.
Error Message: Unhandled native exception [85]
Exception Rec: EXCEPTION_STACK_OVERFLOW (c00000fd) at 0x004FE3DF
Minidump     : Wrote mdmp. Size is 297MB
SafeDllMode : -1
.

It looks like NetBeans does not support JRockit: http://profiler.netbeans.org/docs/help/5.5/vms.html
Regards,
/Staffan

ITunes setup on a NAS with multiple windows users - how?

iTunes setup on a NAS with multiple windows users?
I am very confused on what is the best way to handle this setup for my friends family. Any help would be appreciated. Sorry in advance as I know this is a long winded post - I have a feeling this will help others faced with the same issues or questions.
CURRENT SETUP
I have three new Windows 7 machines networked (two desktops and one laptop) that have four users on each - as busy family with children who need the computers for homework, projects, games, etc... The goal of this setup is that any user can log onto any computer and have there documents available to them no matter computer was free to use. I set this up using the library function in Windows 7 and seems to work pretty well.
I have put a Buffalo Linkstation NAS on the system as well. This was going to serve two purposes 1) run some backup software to protect the computers and 2) consolidate the iTunes content in one place for all users. There is also an iPad in the home that I should would be better served by accessing the content on the NAS without requiring any of the computers being on. Dave is thinking about getting some other playback devices like Apple TV so thought a NAS would be a good way to go.
CURRENT ITUNES SETUP - I have created a new iTunes library on the NAS by holding the SHIFT button down while starting iTunes and pointed to that folder on a Share on the NAS. There was no music on the system at the time as we are planning to copy this over from an OLD machine that is now not being used. I have also authorized all the computers and turned on the home sharing feature (although I am not sure what good that does).
This “shift” button trick seesm to also point the default directory there without point to it in the advanced setup tab of iTunes.
I then synced one of the iPods with purchased content on it and synced that to the library after asking me to do so before an update. All the content showed up in the library and was playable - awesome.
I then logged into each user on each machine (yikes) and installed iTunes and used the “shift” trick to connect each users iTunes to the database on the NAS. Everything seems to work - but I have not tested it thoroughly.
SUMMARY
3 new Windwos 7 networked machines
4 identical users on each machine
1 TB Buffalo linkstation
iTunes setup with the folder on a SHARE
all user’s itunes connected to the iTunes folder on the NAS
all computers authorized with home sharing turned on.
one iTunes user account signed in on each machine
multiple iPods and one iPad in the system
QUESTIONS/CONCERNS
Is there a better way to do this on a NAS?
Would home sharing be better in some way?
I understand the NAS should show up under the shared section in iTunes - I assume that would mean that would mean each user has an iTunes library on their documents?
I have read that there may be corruption issues if users on the different machines try to access iTunes at the same time.
Will there be any issues syncing that various iPods with?
Ugh - sorry for the long post and all the questions. I am just trying to find the best way to do this. I wish Apple would put out a best practices document for setups like this. Thanks in advance.

This is a user to user support forum. Your fellow users can offer solutions or workarounds based on their experience with the application. If you think it should work differently drop a line to iTunes Feedback.
For reasons unknown Apple haven't chosen to allow iTunes to be suspended in one profile and active in another. My recollection is that this applies even if each profile has a different library, although it is some time since I've committed a personal test.
I'm not sure why my suggestion make less sense that your current approach?. As I understand it currently everybody is either signed into their own account when they can do something other than work with iTunes, or they sign into the special iTunes account where they can't access any of their other stuff. You don't have to disable fast user switching. Follow exactly the same steps, but make sure everyone closes iTunes before turning the computer over to another user. Disabling fast user switching helps to enforce that action.
tt2

I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
Bill

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

Can you setup handoff to work with two mac computers on the same network?

I am attempting to setup handoff to work with two computers on the same network. I cannot seem to get it to work. Should I be able to?

I'm not sure but I haven't seen anything on the Apple site that indicates that it would not work. The following troubleshooting documents may help: Get help using Continuity with iOS 8 and OS X Yosemite - Apple Support
Note in particular the Mac models supported. The other thing that occurs to me is that in addition to being on the same network they would have to be within Bluetooth range of each other.

Can I setup an Apple ID with only a Paypal account and NO credit card?

I recently purchased an iPhone and am looking forward to getting everything setup. I'm currently living in Japan and my japanese bank doesn't have a card that has the jcb logo, nor do I have a credit card. So...
Can I setup an Apple ID with only a Paypal account and NO credit card?

You can set up an apple Id without a credit card using this article: http://support.apple.com/kb/ht2534
After that, you can login at iTunes on a computer, go to 'Account' and just change the payment information to something else.
NB: where I live, the only three options for payment are creditcard, iTunes gift cards and Click&Buy, not Paypal. It might be possible elswhere though, I'm not sure.
Good luck

How can I get a single jar file with NetBeans?

How can I get a single jar file with NetBeans?
When I create the project I get these files:
dist/lib/libreria1.jar
dist/lib/libreria2.jar
dist/software.jar
The libraries that have been imported to create the project are in separate folders:
libreria1/libreria1.jar
libreria2/libreria2.jar
libreria1, libreria2, dist folders are all located inside the project folder.
I added the following code to the build.xml:
<target name="-post-jar">
<jar jarfile="dist/software.jar">
<zipfileset src="${dist.jar}" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria1.jar" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria2.jar" excludes="META-INF/*" />
<manifest>
<attribute name="Main-Class" value="pacco.classeprincipale"/>
</manifest>
</jar>
</target>
Of course there is also the project folder:
src/pacco/classeprincipale.form
src/pacco/classeprincipale.java
Can you tell me what is wrong? The error message I get is as follows:
C:...\build.xml:75: Problem creating jar: archive is not a ZIP archive BUILD FAILED (total time: 2 seconds)

This is not a NetBeans forum, it is a JDeveloper forum. You might want to try http://forums.netbeans.org/. I also saw your other question - try looking in the New to Java forum: New To Java

Need Help With NetBeans (Java Studio Enterprise 8)'s code generation

Hi!
I am using Java Studio Enterprise 8 with NetBeans 4.1 IDE bundled together with it. When trying to create GUI out from NetBeans Form Designer, I don't like the way it generates the code. When I try to use a JTextField, it uses "Fully Qualifed Class Names" (e.g: javax.swing.JTextField) on the code. How do I set NetBeans not to use it but rather use only the class name and generate import lines on top of the code? Also, how do I set it up that it will generate the variable declarations (which is on the uneditable blue portion of the code) on top rather than the default which is placed at the bottom of the class code body. I have tried tweaking the Options menu of this IDE but haven't got any luck...
Hope you could help, and thanks in advance!

To address the location of the var decl codegen section (or any codegen location issues), there is a workaround, admittedly, it is a bit tedious.
Once the form code is generated, as Kris mentioned, open the class in an external editor so that you can edit the generated code.
Then cut the entire var declaration section along with the begin/end gen-code markers and paste it to the section of the file you desire.
When you add more components to your form, the codegen will find this section wherever it is and add to it.
Alternatively, you could just move the non-protected code around the protected within the NB editor, but you would not be able to rearrange the order of the actual code-genned sections.
craig

Satellite L500-1ek - setup system always starts with 800x600

I have new Satellite L500-1ek notebook with Windows 7.
Whatever screen resolution I setup system always starts with 800x600. And not only after restart but even when I logout my profile and login again.
More: I use also external monitor. I can have mirror of my laptop screen on the monitor or only display on monitor but whatever I do I cannot have extended screen.
When I try to set it up I'm simply ignored by driver.
So I tried to install newest driver. I downloaded it from Toshiba site but it never installed saying me that my system did not meet minimum requirements.
What to do now?
Marek

Hi Marek,
> I downloaded it from Toshiba site but it never installed saying me that my system did not meet minimum requirements.
As far as I know your notebook is equipped with Intel graphic card and so you are installing the latest display driver from Toshiba website. Is this right?
Well, I have to say that I had the same issue on my Satellite U400 that is also equipped with Intel graphic card. The solution for this problem was pretty easy: I installed the driver via device manager. There select the graphic card, make a right click on it and select Update Driver. In next windows choose the advanced installation where you can choose the driver directory yourself. After the installation make a restart and thats all! :)

ADF Faces with NetBeans Visual Pack

Hello all,
I have NetBeans 5.5.1 installed with the Visual Pack and I am looking to try out other libraries with it, in particular ADF Faces from Oracle.
Does anyone know how to import the components into the NetBeans Visual Pack? They download from oracle as[b] adf-faces-impl-10_1_3_0_4.jar and not as a complib extension, which NetBeans prefers.
Please if anyones has any experience with getting this to work let me know. Or if you think it can't work let me know as well?
Hoping to hear from someone soon. Thanks in advance.

Hello again,
Anyone out there using ADF faces with NetBeans Visual Pack who can give some feedback?
I want to be able to use the drag and drop capabilities of the Visual Pack with the ADF faces components, but I don't see how to configure this as they do not come pre-configured as a complib extension.
Any feedback would be appreciated.
Thanks and Regards.

Problem with Netbeans 7.1 and ME SDK 3.0.5 plugin

Hi!
I have problem plugin ME SDK 3.0.5 to Netbeans 7.1. When I try to install plugin into Netbeans I get this kind informations:
Warning - could not install some modules: Profiler (Java ME Projects Support) - The module named org.netbeans.modules.profiler/1 was needed and not found. Java ME SDK CPU Profiler Snapshot Viewer - The module named org.netbeans.modules.profiler/1 was needed and not found. 5 further modules could not be installed due to the above problems.
Does anyone know what is wrong?
I am truly grateful for the answer!

Hi Anvi,
I think you posted in the right place as the J2ME SDK Team read this forum (though they sometimes don't respond promptly as we would have liked). I also got the same issue as you, but check out the responses by the J2ME SDK Team to: https://blogs.oracle.com/javamesdk/entry/update_java_me_sdk_through
It seems there are issues with Netbeans 7.1, and they are fixing things for the next release for Netbeans 7.1.1 so I am sure they are aware of problems that we are encountering. Its fine for Netbeans 6.9/7 if you cannot wait though.

Can i setup a wifi router with my IPad2 without using a computer ?

Can i setup a wifi router with my IPad2 without using a computer ?

This is going to depend on what wireless router got get. Some want to do all administration functions via a ethernet cable connection for security reasons.
Once the router is configured, you will no longer need a computer.
Try looking for a router that configures through a web browser & allows administration from a wifi connections.
I think the easiest thing will be to have a friend come over & configure with a laptop. I believe that you can configure the router without have a broadband connection. You could configure it at a friends house. Might not want to connect to the friends broadband so not to confuse your friends broadband. ( this is only a worry if the router also includes the broadband model. Just a wireless router without a modem is not worry ).
Robert

Setup IdM 8.0 with NetBeans 6.1, setRepo issues

Similar Messages

Maybe you are looking for