Setup of SOA demo in SAP backend system

The scenario is the following:
I have found a WS that I want my customers to be able to call in order to query invoice information. The WS is u201CSupplierInvoiceERPByIDQueryResponse_Inu201D and is found using the ESworkplace.
I am using PI 7.0 and I want to use the Service Registry in PI to expose my services. As I understand it is NOT recommended to use PI 7.0 but the SAP backend (ECC) should be used instead.
What are the steps that should be involved?
a) How to locate the WS in SAPBACKEND?
b) How to publish this WS from SAPBACKEND to the PI service registry (SR)?
c) How to make the WS "connected" to the SAP system?
d) How can the customers "consume"/execute the WS?
e) How can my customers browse the SR in order to find the WS? what is best practice?
f) Why are the route through PI NOT recommended - SAP proclaims that PI should be the central processing component in a SAP landscape in these SOA times so why not use PI?
Hope someone can help me out.
Cheers

Hey,
This document describe how the handle audit the the sender and the receiver systems are SAP system, when one of the sides (sender/receiver) is not SAP system,
than the configuration become much more complex.
As of XI SP18, there are ways to control ALEAUD,
for more information, read:
http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393634373435%7d
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc

Similar Messages

  • How can we trigger the notification from SAP backend system to SMP3.0.

    Hi All,
    Can any one help me to know is there any standard approaches available to get notification from SAP backend system to SMP3.O server after any event that has been triggered.
    Any of suggestion related to above will be helpful.
    Thanks,
    Anjali

    Hi Ekansh,
    I have few more question regarding push notification from backend.
    Refferd Link:-http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40ab6d83-b7b8-3010-65bc-d7a08f0f35f3?QuickLink=index&…
    Pushing Notifications Made Easy!!! : Push a Notification
    Have perform all the steps till creating RFC Destination to mobile platform by creating a new push service.
    I just wanted to have a clarity on target host that we are specifying should also have SMP3.0 server installed???
    Actually I am using http listener downloaded from membrane site which is running on that target host machine.
    But I am unable to get any response in my listener.
    Even wanted to know the necessity of exchange of certificate for SSL Connection.
    SMP server Certificate exchange with SAP Backend and SMP server certificate exchange with HTTP Listener????
    Because currently I am trying to have a notification from SAP Backend directly to HTTP Listener without having SMP server.
    Can u please correct me where I am going wrong.
    Thanks & regards,
    Anjali Agrawal

  • How to create Contract in SAP backend systems( R/3)

    Hello All,
    We have SRM4.0 with classic scenario. We don't have sourcing cockpit , bidding engine and all activated.
    Please suggest me, how can I create contract in backend system?
    We don't want to create GOA in SRM system and distribute it to backend system.
    Regards
    Neelesh

    Hi Neeleesh,
    Go through the GOA setup in the <a href="https://websmp205.sap-ag.de/~sapidb/011000358700002897362004E/CG_Sourcing5.pdf">Strategic Sourcing Configuration Guide</a>
    In the web GUI you can use the transaction BBP_CTR_MAINCC to create the Global Outline Agreement
    Note 646903 is also useful.
    Hope this helps.
    /Kristoffer

  • Setup of ALE Audit in SAP Receiver System

    Hello,
    for a scenario JDBC -> XI -> IDoc,  I have to setup ALE Audit in the receiver SAP sytem.
    I have followed the steps in the How-To-Guide (Handle acknowledgements for IDocs):
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
    However I just want to have acknowledgements sent back to SAP XI for a specific type of IDoc (source coming from the database) and not all received IDocs as there are different sender systems sending IDocs (some of them via XI some of them directly).
    Is there a way to configure ALE Audit in a way ALEAUDITs are sent just for specific sender systems / IDoc types. I want to avoid that the SAP XI system receives ALEAUDIT for all inbound IDocs.

    Hey,
    This document describe how the handle audit the the sender and the receiver systems are SAP system, when one of the sides (sender/receiver) is not SAP system,
    than the configuration become much more complex.
    As of XI SP18, there are ways to control ALEAUD,
    for more information, read:
    http://help.sap.com/saphelp_nw04/helpdata/en/42/c8f66bc7a56bb0e10000000a1553f6/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393634373435%7d
    /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc

  • SAP Backend systems and SAP OPI Integration

    Dear Experts
    I have been reading many articles and blogs on Operational Process Intelligence but have couple of doubts regarding capturing events
    from different backend systems
    1. There is a Business workflow in ERP which we needs to be imported in SAP OPI. In one of the guides its mentioned that
    "The ERP system needs to have the software component
    SAP_BS_FND satisfying the below mentioned support package levels for various releases. ● 731: support package level 5 ● 730: support package level 4 ● 702: support package level 10 ● 701: support package level 12".
    If a customer is not on SAP Business Suite and its only ERP installation then does this mean that we cannot import Business workflows in SAP OPI?
    2. In lot of blogs its mentioned to use Process Observer in backend systems but what if client has not activated or using Process Observer in their landscape. What would be our options here to capture events ?
    3. In SRM system we typically use Process Controlled workflows. Can these be imported directly in SAP OPI business scenario. Again assume there is no Process Observer here. Has anybody tried this?
    Would be really great if I get clarity on these items
    Regards
    Rahul

    Hello
    Do you need to connect SAP R/3 users to ADS?
    for that just follow SPRO setting of LDAP and customize your SAP system to access LDAP.
    If you need to define HPUX users using ADS, It will require you the define login stack for HPUX.
    Erez

  • Can't connect to a SAP backend system via portal/web dynpro/JCo destination

    Scenario:
         Can't successfully set the JCo destination.. Always got a Java exception..
    Solution:
         Use the router string "/H/sapserv3/S/3296/H/", instead of
    "/H/sapserv3.wdf.sap.corp/S/3296/H/".
         This looks like a bug in portal NW2004s SP9.

    Sorry for the delay, but I was not able to get access to this system until this afternoon.  I ran the ARP command you suggested on the server, and it did return the correct IP and MAC address values for the problem workstation.
    I then ran IPCONFIG/displaydns on the server.  There was a record there for the problem workstation.  The "record name" matched the machine name correctly.  However, the "A <Host> Record" value was for the wrong IP address (192.168.1.4
    rather than the actual workstation IP of 192.168.1.7).  This could certainly explain why I am not able to RWA/RDP to the machine by name, although I can make an internal RDP connection via IP address.
    Could you please tell me what I need to do to repair this problem?  Should I run IPCONFIG/flushdns on the server?
    Thanks again for your assistance.
    John

  • Regarding function changes in sap backend system

    Hi Team,
    I would like to check if we can alter functions and its actions/permissions in SAP back end and transport it across landscape.
    This is needed as we customize the rule set and its difficult to validate the risk analysis changes directly in production when its made via nwbc.
    Thanks in advance.
    Regards,
    Anil

    Hi Anil
    If you maintain a Function definition then you are updating those tables (Function to Action (transactions) and Function to Permission (Authorisations) tables). So the answer is YES
    If you are asking if you should maintain directly in Production Vs Transport then the answer would be DEPENDS - what is your company process
    If you are asking if you can maintain the SAP delivered rule set (activate via BC SETS) then the answer is DEPENDS. Again, it comes back to your company business process. You would then need to consider how you manage any future recommendations from SAP if they update their rule sets
    But again, those tables is where you store function definitions so of course you can maintain them.
    Regards
    Colleen

  • PDF generated in SAP backend to be stored in Cloud Proxy object

    Dear Colleagues,
    We generate the pdf file in SAP backend system and send the pdf as an attachment to email address. Along with this we also want to automatically have this pdf file stored in Cloud Proxy object. So that users can access these files in Cloud portal when needed.
    If anyone has expertise on this topic, please share or suggest the solution.
    Thanks,
    Arun

    Hi Arun,
    Would you like to achieve an automatic way to store the document in cloud portal? Can you elaborate a bit more?
    Check out this blog demoing the documents repository capabilities and read the official documentation here.
    I believe the public folder can fit for your needs.
    Regards,
    Eliel.
    Cloud Portal Development.

  • SAP Discovery system support

    Dear all,
    Do you know if customers who run a SAP Discovery system are entitled to any kind of dedicated support from SAP? For instance, via their regular support engagements such as Standard Support, Enterprise Support, Safeguarding or MaxAttention?
    Or do they have to contact another instance within SAP if they require help with the setup or operations of the SAP Discovery system?
    Thanks a lot in advance!
    Best regards
    Gregor

    Hi Gregor,
    The Discovery system is supported via CSN. For any Discovery System related issues, please open a CSN ticket on component CA-SOA-DS.
    thanks,
    Deepa

  • JCo Scenario with multiple Backend Systems

    Hello @ all,
    Is it possible to use multiple Jco destinations to multiple Backendsystems in one WD application?
    The scenario is as following: I want to call different function modules on different SAP Backend systems?

    Hi Mehmet
    Alternatively you could try switching the destination through URL parameters
    http://<Host-Name>:<Port-Nummer>/webdynpro/dispatcher/local/Example_Project/Example?sap-wd-arfc-useSys= WD_MODELDATA_DEST:SyB&sap-wd-arfc-useSys=WD_RFC_METADATA_DEST:
    SyB
    Check this link (I havent tried it though)
    http://help.sap.com/saphelp_nw04/helpdata/en/f4/651741f163f023e10000000a155106/frameset.htm
    Regards
    Pran

  • Serialize IDOCs PI to SAP Backend

    HI,
    I need to serialize IDocs thats PI send to a sap backend system.
    rigth now we have one CC with max connection = 1 but it is not enough.
    but something is not clear at all for me.
    I need to send IDocs with QoS EOIO so, i asume that checking the parameter "Queue Processing" in the IDoc Receiver Channel the IDocs will sen them to SAP in EOIO, but that means --> One queue will be defined(in backend) for each IDoc that use this Channel?.
    If i set this functionality could i increase the parameter max connection to 10( for example) and the channel should know which queue was defined for each IDoc in the backend or it is not possible and I am thinking crazy things.
    Is it possible also to configure the transaction IDXQUEUE in SAP Backend?
    Best Regards.

    Searching for othar alternatives y found that is possible to change the QoS or the Queue id values in a Messager Mapping.
    Change Queue name in Message mapping
    http://help.sap.com/saphelp_nw04/helpdata/en/6e/ff0bf75772457b863ef5d99bc92404/frameset.htm
    but as i can see, there is not possible to access the variables QUEUE_ID and QUALITY_OF_SERVICE since those are ReliableMessaging's variables(help.sap link above)
    so i can access all Main's variables like SENDER_SERVICE, MESSAGE_ID, etc etc)
    How can i get access to this ReliableMessaging's variables from UDF or Adapter Module?
    In the thread above someone mentions that was not able to modify those values in a UDF but in a Adapter Module (i asume using the same code below) what could be the difference accessing frmo UDF o Adapter Module?
    UDF Code
    java.util.Map map;
    DynamicConfiguration conf = (DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey qos = DynamicConfigurationKey.create("http://sap.com/xi/XI/System","QUALITY_OF_SERVICE");
    conf.put(qos,"EOIO");
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System","QUEUE_ID");
    conf.put(key,queueName);
    return "";

  • Using two backend systems

    Hello,
    I am a begginer with web dynpro for java. I want to create a application which connects to two different SAP backend systems. How can I do that? The application needs to use the same user interface to make a search on both systems.

    Hi,
    Refer to these threads below:
    Meta JCo connection issue - cannot have 2 systems for ESS????
    JCO connection to multiple R/3 Back end system
    Regards,
    Poojith MV

  • RARs' criteria for analyzing roles in ECC backend system?

    Hi All,
    I'm working on setting up a prototype of Access Control 5.3. In RAR I notice the analyzis of roles is not done for all roles.
    I have taken note 1179717 into consideration, and also performed mass user compare. But not all roles are analyzed yet.
    Some of the roles are not tied to a profile, but it seems RAR does not segregate on this.
    Does anyone have a list of criteria RAR uses when looking at what roles to analyze?
    Thanks in advance,
    Leif Nilsson

    Hello Leif,
    You can find SAP Notes only on SAP Service Marketplace
    https://websmp103.sap-ag.de/notes
    You cannot directly compare the numbers of RAR with the roles you want to analyze, without following the below steps completed successfully.
    1- Connect the SAP backend system to Risk Analysis and Remediation and complete all post-install activities.
    2- First you have to run the report RHAUTUPD_NEW in your backend system.
    3- Select all roles, select 'Perform User Master Comparison', but check only "cleanups" from the 'editing types'.
    4- Now execute the report.
    5- When finished re-run a full user, role, profile synchronization for this SAP backend system in Risk Analysis and Remediation.
    There are two types of synchronization, Full and Incremental:
    6- Select Full synchronization
    7- Perform Batch Risk Analysis. This is the core function of RAR.  By performing a batch risk analysis, the security of the users/roles/profiles are compared against the Segregation of Duties rules to identify possible conflicts. It then makes a call to the back-end system to retrieve the authorization assigned to each of these user/roles/profiles.  It then performs the analysis against the rules in the front-end.
    8- Run Management Reports. Running this piece of the job is what ultimately updates the numbers you see on the Management Report and table virsa_cc_prmvl is updated.
    9-  You will get the list of total Number of Violations , the Violation count by Risk and  Violation Count by Permission
    Now you are ready to compare the numbers in the following way, seen below.
    10- Log on to your SAP backend system and use transaction SE11 to identify single roles with profiles from table AGR_1016, but note that roles having multiple profiles appear multiple times in this table.Count the number of distinct roles in table AGR_1016.
    11- Now, only count those distinct roles in AGR_1016 that have also an entry in AGR_DEFINE. You can do this with a small custom report or with Excell.
    12- In your SAP backend System use transaction SE11 to count the number of profile in table USR10 having the flag 'AKTPS' set to 'A'. Each profile appears only once in this table.
    This number should match the number on profiles synchronized in Risk Analysis and Remediation.
    Thanks,
    Mohi

  • Information about the default setup for the demo user

    Hi,
    Can anyone guide me the properties which we have to set for the below
    # Information about the default setup for the demo user.
    db.adminUser=system
    db.demoUser=FOD
    db.demoUser.password=fusion
    db.demoUser.tablespace=USERS
    db.demoUser.tempTablespace=TEMP
    And what exactly they represent
    Regards,
    Krishna

    Krishna,
    It's pretty obvious...
    db.adminUser = the username of a dba user in your database
    db.demoUser = the username of the demo user that will get created
    db.demoUser.password = the password that will be used for the demo user
    db.demoUser.tablespace = the default tablespace for the demo user
    db.demoUser.tempTablespace = the default temporary tablespace for the demo user
    You don't have to change any of them.
    John

  • Applying GRC-addons in Backend systems

    Dear Freinds,
    I am trying to install the GRC RTA's VIRSANH 530_700 and VIRSAHR 530_700 in the SAP backend systems. I started applying the Add-on for the VIRSANH which prompted a password by displaying the note 1133167. When checked in SMP it says "The requested SAP Note is either in reworking or is released internally only" and the same message for the Note:1133168(VIRSAHR). Please suggest
    how to proceed like do i need raise an OSS to SAP Team.
    Your advice/help in this regard is highly appreciated
    Thanks & regards,
    Sitaram

    Hi,
    You are right, the notes is currently unavailable, however i have the saved passwords mentioned in the notes when it was available.
    try you luck with below passwords.
    VIRSANH 530_700  E46B5BFA5F
    VIRSANH 530_700   C420870F14
    Vijay Kothapalli

Maybe you are looking for