Several BP banks and Payment Wizard

Hi Experts,
By posting an A/P invoice I changed the bank details "pay to code" in Logistics in order to pay it to another bank of the vendor (the vendor has got 2 different banks in BP master data)
I run Payment Wizard but it paid that invoice to the Default bank set in BP master data.
Why can I set a different bank in A/P invoice (Logistics) if it is not taken into account ?
I am using SAP B1 9.0 PL 11 (Italy Loc)
Thanks a lot for your answer.
Veronique

Hi Veronique,
Payment wizard may only pay to the default bank account even if you have another account for the vendor. You may pay it manually for non default account. Or change the account to default before you run wizard.
Thanks,
Gordon

Similar Messages

  • House Bank and Payment Method Supplement

    Where is the mapping of House Bank and Payment Method Supplement done???

    hii
    you can map the house bank and payment method in T.code FBZP.
    that is automatic payment run.
    reward points if helpful.
    sejal singh

  • Sorting of Dunning Wizard and Payment Wizard

    Dear Development,
    we have the following business situation.
    1) We create a Dunning Wizard or Payment Wizard.
    2) We make a printout of all selected business partner and documents in Step 5 of the DW or PW.
    3) The chief decides which payments should be done.
    4) We have to unslect or select the checkboxes again.
    5) The problem is now, it is quite difficult to find out the correct business partner related to the printout.
    We need a filter functionality or a sorting algorithm for all columns. Thanks a lot for your help.
    Regards Chris

    Hello Chris,
    Thank you for your input. It's quite clear and reasonable. Unfortunately, sorting and filtering feature is quite difficult to implement on multi-level/hierachical grids in SAP Business One; for the time being, this logic is not supported but we will consider it for one of the next major releases.
    I guess ideally the 'Find' control could help better. That we can consider as well. What do you think?
    Peter Dominik
    B1 Solution Management

  • Issue AP checks and Payment Wizard

    What kind of situation to use Payment Wizard instead using Outgoing check for check printing?
    I believe the outgoing checks need to do the same two steps like incoming payment then deposit for AR invoice/credit memo/journal entry, right? 
    The eLearning will cover detail information for incoming/deposit and outgoing/check issue?

    Yes you are correct if a user sets up the terms incorrectly on the master file then invoices will not come up to be paid properly - garbage in and garbage out. All of my clients use the wizard to pay their invoices it is a huge time saver.
    Yes if a user generates the wizard and decides they do not want to pay a vendor in whole or one or more invoices then they should be deleted from the wizard so they are available to be paid later.
    Manually entering one payment or check at a time and choosing the invoices to be paid is like going back in the dark ages.
    Go through your vendors, review and correc their payment terms and payment methods. Instruct your internal personnel how to properly use the wizard and they will save hours on each check run.

  • Payment Wizard not selecting open AP invoices

    Hi,
           I am having a problem with the payment wizard outgoing check run picking up open AP invoices.  I am using the OEC Computers test company and input an AP invoice for Far East Imports and one for Acme Associates.  Both invoices have docdates of 2/2/09 and due dates of 3/4/09. 
    When running the payment wizard I selected payment type of outgoing and payment means of check.  Selected due date of 3/1/09 and posting date of 1/1/09 thru 3/5/09.  At the next window I marked the "Outgoing Checks" option.  However, on step 6 (Recommendation Report) the grid is empty showing neither of my 2 AP invoices.   
    I checked and both vendors have the outgoing payment method of "Outgoing Checks" assigned to them.
    Why aren't my open AP invoices showing up for selection in the payment wizard process?

    Hi,
    Check the Tolerance days in the payment run defaults. Take the days as zero and run the payment wizard.
    In 2005 version available under following path :
    Banking Module > Payment Wizard > Payment Run Default > Tolerance days.
    In 2007 version :
    Administration > Setup > Banking > Payment Run Defaults.
    Regards,
    Jitin
    SAP Business One Forum Team

  • Housebank and payment method for vendor

    Hi
    While doing MIRO, i want housebank and payment method to populate from vendor master data.  I maintained both these details in VM data but its not populating automatically in MIRO.  Please help.  (m using ECC 6)
    Sadhana

    Thanks Rinku.
    If we keep house bank and payment method fields blank while doing data entry, system will pick them up from VM data at the time of payment run. Right??
    But if the housebank field is mandatory for data entry (as in my scenario),  then we have no option but to fill the fields up at the time of MIRO or FB60.
    In my scenario, daily there are 150 bills processed at one centre, and the user has to fill up these two fields every time.  Is there any other solution so that this trouble can be saved?
    Thanks (points assigned).

  • Fb60 is not updating the vendor master HB and payment method

    Hi,
    For APP i have maintained the house bank and payment method in vendor master. When we do the FB60, system is not copying the house bank and payment method in FB60 document. Can any one guide me on this.
    govind

    Hi,
    Field status is optional only. And in FB60 screen i can able to view the house bank and payment method. My doubt is i have assigned the house bank and payment method in vendor master, hence while doing the fb60 system want to pickup and update the house bank and payment method in fb60 transaction. but it is not happening here. So in F110 we are not getting the document which was posted in fb60.
    govind

  • DRQ: Allow choosing correct Business Partner bank account in Payment Wizard

    Hello,
    This is a DRQ about the Payment process.
    It concerns the "Payment Wizard" functionality (Menu "Banking --> Payment Wizard") and the "manual outgoing payments" creation (Menu "Banking --> Outgoing Payment --> Outgoing payment").
    Version : 2007A SP00 PL38
    Description of requirements :
    In the current version of SBO ( 2007 SP00 PL38 ) when we create an outgoing payment with bank transfer as Payment method (manually or with the Payment Wizard), it is not possible to specify the Supplier "bank account" to use. The default bank account defined in the Supplier Master Data is automatically chosen by SAP B1.
    We can create several bank accounts in the Supplier Master Data, but it is not possible to use the non-default ones in the outgoing payments creation.
    Business needs:
    Some of our SAP B1 customers get suppliers with several bank accounts. They use the "Payment Engine" to generate "bank file" for bank transfer and forward the bank files to their banks and require to choose the correct bank accounts to use to pay each documents.
    The aim of the Payment Wizard is to help the SAP B1 customers to create regularly and automatically some outgoing payments.
    And when the Payment Wizard is run with several documents to pay on different supplier bank accounts for (for example AP Invoices to pay on different bank accounts for the same supplier), it does not work correctly because the bank account which is used in the "bank file" created at Step 9 of the "Payment Wizard" (by clicking the "Bank File" button added by the Payment Engine) is the default one.
    Current Workaround:
    To generate correct bank files, the SAP B1 user has to run several times the "Payment Wizard", modifying each times the default bank account of the supplier. The result is the creation of several "bank files"...
    and an important loss of time !
    Proposed solution:
    In the Payment Wizard, in Step 6/9, add a column which allow the user choosing the bank account (for example in a "choose from list" which display the existing bank accounts of the corresponding supplier) for each document to pay.
    The supplier default account is proposed by default but can be changed for each line.
    This column should be deactivated for other payment method than "Bank Transfer".
    This functionality should be interesting for manual outgoing payment because it should allow choosing the supplier bank account to pay on and recording this bank account information in the manual outgoing payment. In that way it will be possible to print the bak account information on the printed forms (PLD) we can print and send by fax to the bank.
    Kind Regards.
    Grégory

    Hi Grégory
    I have encountered the same problem: The payment wizard always suggests the supplier's standard bank account, irrespective of the information entered on the logistics tab in the pay to field of the AP Invoice. Unlike the solution you proposed (choose from list), I would prefer the payment wizard to automatically select the bank entered in the pay to field of the AP Invoice.
    Best regards
    Christiane

  • I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the "Recommendation Report" screen, I clicked "Non-Included Trans." and saw that one of the vendors (Vendor Code: WILCO) has the followi

    Hello,
    I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the “Recommendation Report” screen, I clicked “Non-Included Trans.” and saw that one of the vendors (Vendor Code: WILCO) has the following error:
    “The document amount is greater than the max. amount allowed in the payment methods linked to the BP”
    Upon checking, the “PCF-W” Payment Method linked to WILCO does not have any restrictions, nor does WILCO have any credit/commitment limit set. I have also appropriately defined the Dummy Business Partner Bank (under Payment Terms) as well as checked the “Included” box for PCF-W on the Payment Run-Payment Methods screen.
    Could anyone please help me on this?
    Salamat,
    Cat

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • Bank statement Nr in journal entry and Payments

    In Notenumber 1374872 (SP 01/PL7) a change has been implemented that the number of the payment run is copied to the remarks of the payment and the journal entry. I think it will be good idea to do the same for the number of the bankstatement in bank stament processing. Hereby the text for the note 1374872. The reason why and the solution are the same.
    Regards,
    ProSigma BV
    Cees Hameete
    Symptom
    To find the number of the payment wizard run in payments and journal entries, bookkeepers currently have to open the journal entry, navigate to the payment document, and then search manually in the executed payment wizard runs to find the correct number.
    Other terms
    Incoming payment; outgoing payment; payment wizard; journal entry
    Reason and Prerequisites
    Functionality description
    Solution
    To improve usability and provide integrated journal remarks information, SAP Business One was changed as follows:
    When an incoming or outgoing payment is generated using the payment wizard, the application adds the payment wizard run number to the "Journal Remarks" field of the payment document and to the "Remarks" field in the journal entry on both header and row level.
    The values in the "Journal Remarks" and "Remarks" field have the following structure:
    Incoming Payments - [Customer Code] - [Payment Wizard Run Number]
    Outgoing Payments - [Vendor Code] - [Payment Wizard Run Number]
    SAP intends to provide a patch or patches in order to solve the problem described.
    The section Reference to Related Notes below will list the specific patches once they become available.
    The corresponding Info file of the patches in SAP Service Marketplace will also show the SAP Note number.
    Be aware that these references can only be set at patch release date.
    SAP will deliver patches only for selected releases at its own discretion, based on the business impact and the complexity of the implementation.

    I completely agree with your proposal.  We have the same problem at the moment.  I hope SAP will implement a solution for this.

  • Problem with creation of Bank Transfer file by standard Payment Wizard

    Hello,
    I am currently trying to check if the file created by the Payment Wizard is gathering the appropriate data for Bank transfer payment.
    All the steps of the wizard are undergone successfully. However, no file is created or updated.
    Do you have an idea of what would be related to this problem and what could be the solution ? All the bank and accounts information are in the database, so basically nothing is missing as for data.
    Is the path for the file location important ?
    Do I have to create the file before and with an appropriate format ?
    Thank you for your help !
    Francois

    Hi,
    First of all you need to verify that you have allocated a bank file format for the particular payment method. I assume that you have since you are able to successfully generate the payment run. Once you reach the last step which is step 9 of 9 where you are able to print reports carefully observe and locate the bank file icon to the bottom right of the screen. Once you click on that icon you will be able to select the output file location and need to complete the test run successfully whereafter you need to execute the production run. Once the production run has been completed the output file will have been generated.
    Regards,
    Andre

  • Payment wizard -No matching records found  'Bank Codes' (ODSC) (ODBC -2028)

    Hello dear experts,
    I'm trying to execute the payment wizard to receive a payment from a vendor
    The invoice appears in the recommendation report but the payment isn't added when i execute the payment run.
    It appears after that in the Non-Included transactions with the following error message :
    No matching records found  'Bank Codes' (ODSC) (ODBC -2028)
    Can you solve this problem?
    Thank you

    Hi,
    Could you find the followings regarding bank information and check if all the settings are correctly defined
    1. Define payment run defaults > Payment method
       Check payment method details from Administration > Setup > Banking
       > Define payment methods
       Payment method which is linked to BP > payment means - Bank transfer
    2. ODSC table, Bank Code (just to check bank codes are stored well)
    3. BP master data > Payment terms > BP Bank accounts
    4. BP master data > Payment system > House bank.
    Also Check Note no [971105|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0000971105].
    Regards
    VIkas
    SAP Business One Forums Team

  • Payment Wizard - Bank transfer problem

    Hi,
    In the Payment Wizard if I select the outgoing payment and payment means as check in step 2, The recommendation report in step in step 6 shows the Business Partners and transactions but if I select Bank Transfer as payment means then no Business Partner is displayed in the recommendation report, however the outgoing amount and total value are displayed at the bottom.
    The SAP Version is SAP Business One 8.8 SP:00 PL:08
    Any know issues in this version or am I missing some this. Any suggestions will be helpful.
    Thanks in Advance.
    Regards,
    Mohan

    Hi Mohan,
    PL08 is a little bit old. Try under new PL to see.
    Thanks,
    Gordon

  • Outgoing payment with Payment Wizard with Bank Transfer

    Hello to everyone !!!
    I'm Configuring a Company who want to use the 'Payment Wizard' to make Outgoing Bank Transfers payments with it.
    I did the configuration in 'Payment Methods' of Outgoing Bank Transfers, where I chose a File Format from the list (Even I don't know which one should I choose) and I also chose de 'House bank', bank and account where the Outgoing Bank Transfers will come.
    At the time when I did the payment wizard it suggest me to make an outgoing payment of my due A/P invoice very well. The problem is in the next step (STEP 7) when i run the execution and in STEP 8 it says:
    0 Payments were added
    0 Bank transfers were added
    So, It did not make any bank transfer Transaction!!!! =S
    Someone knows what i'm missing from the configuration???
    Someone knows if this is a bug??
    Thanks for your Help!!!!

    Hi Karina,
    please see the info from SAP Note 725786. The note is currently being updated with the new information relating to system behaviour in version 2007  & should be released again shortly:
    In order for the payment wizard and subsequently the payment engine to
    work properly, SAP Business One must be defined correctly as follows:
    1. Define the House Bank:
    a) Administration -> Setup -> Banking -> House Bank Accounts - Setup.
    b) Choose the Bank Code, Country and Account Number.
    c) If the business partner bank is a postoffice bank, tick the Post Office box.
    d) Update the window.
    e) Enter into the House Bank Account Setup winod again and enter the Branch and the account number of the corresponding G/L Account.
    f) Update the window.
    2. Define Business Partner bank:
    a) Administration -> Setup -> Banking -> Banks.
    b) Choose the Country Code, Bank Code and Bank Name, if necessary Swift number.
    c) If the business partner bank is a postoffice bank, tick the Post Office box.
    d) Update the window.
    3. Define Payment Methods:
    a) Administration -> Setup -> Banking -> Payment Methods.
    b) Enter the Payment Method Code, Description and the Transaction Type.
    c) Select the Payment Type and the Payment Means.
    d) In "File Format" choose the correct plug-in for the transaction (refer to the Payment Engine Online Help for the correct plug-in for the transaction you have defined).
    e) Select your House Bank for this particular payment method.
    f) Select the validation options and remember to tick Post Office Bank, if the bank is a Post Office Bank.
    g) If the outgoing payment is by cheque, restrictions can also be defined here.
    h) Add or update the window.
    4. Set up a Business Partner for the payment wizard:
    a) Business Partner -> Business Partner Master Data.
    b) Under the "Payment Terms" tab, enter the bank country.
    c) Enter the account number and the branch, update to return to Business Partner Master Data.
    d) Under the Tab "Payment system" tab, tick the desired Payment Method to include it in a payment run.
    e) Under the Tab "Payment system", select the house bank that was defined for the desired payment method used for transactions with this business partner.
    f) Update the window.
    5. Generate invoices for this business partner.
    6. Define the standards for the payment run:
    a) Banking -> Payment System -> Define Payment Run Defaults (In 2007 A version the path is: Administration -> Setup -> Banking -> Payment Run Defaults).
    b) Define tolerance days, cash discounts etc as needed.
    c) Define minimum and  maximum payments if necessary.
    d) Tick the box beside "Payment Methods".
    e) Click on the radiobutton beside "Payment Methods" and select the payment method(s) to be executed in this payment run by putting a tick in the tick box.
    f) Update the window.
    7. Open the Payment Wizard (Banking -> Payment System -> Payment Wizard).
    a) Select a new payment run - Step 1.
    b) Click on "Next" and define the Payment Run Name and the Posting Date, the payment type and the payment means - Step 2.
    c) Click on "Next" and select the business partners to be included in this payment run, make sure that the tick box for the relevant Business Partner Name is ticked - Step 3.
    d) Click on "Next" and define the document parameters - Step 4.
    e) Click on "Next" and select the payment method this payment run is applied to by ticking the box to the left of the payment method code - Step 5.
    f) Click on "Next" and tick the payment number for the business partner to be included, individual invoices can be selected by clicking on the "Expand All" button and either selected or deselected. This also applies to Credit Memos (and to manual Journal ENtries in 2007 A). Click on "Non-included Trans." to identify any troublesome transactions - Step 6.
    g) Select to either "Save the selection criteria", or "Mark as recommended" to process at a later point in time or select to "Execute" immediately - Step 7.
    h) In Step 8, you are given the Payments Run Summary.
    i) If you selected to execute the payment run, in Step 9 the Document and Report Printing options will be displayed. To generate the bankfile and any associated documents relevant to your localisation, click on the radiobutton "Bankfile".
    j) A "Browse for Folder" window will pop up where the destination directory of the output files must be selected. Once a folder was selected and "OK" was clicked, the payment engine will take the data out of Business One and create the defined files.
    k) Once the procedure has completed, an information system message will be displayed: Payment Engine run was successful"
    8. Go to the destination folder and check the logfile and the bank file(s).
    All the best,
    kerstin

  • Payment wizard, Invoice devided on more than one bank

    Dear Ladies and Gentlemen,
    our costumer has the following problem:
    By using the payment wizard for creditors you have the possibility to choose banks from which the payments will be transferred. This happens in step 5 of 9.
    You can insert the desired amount of every bank and choose the order of the banks by using arrows:
    For Example: The costumer has a credit of 10.000 u20AC from bank1, from bank2 he has a credit of 20.000 u20AC, on bank3 there is no credit and on bank4 he has 1.000.000 u20AC credit.
    The costumer wants to use now the credit from bank1 and 3 first now, of course not the bank2 and for the rest of the payment he wants to use the bank4.
    To transact like this the relevant amounts are included and the sequence bank1-bank2-bank4 is chosen (bank3 is not ticked). In step 6 of 9 the open items of all deliverers will be displayed.
    The payment method for every invoice was already calculated by Business One. In this step some invoices are excluded which should not be payed because of different reasons.
    Now the problem occurs: After excluding some invoices there is no new calculation which invoice should be payed from which bank. That means that if the invoices which were put out of the system occasionally had the payment terms bank1 or 2 the payment of this two banks (which was 10.000 u20AC and 20.000 u20AC) is now reduced. The amount of the reduction is the amount of the excluded invoices.
    Our costumer wants following:
    The distribution of the payment should be only done when the open items were controlled ( maybe some invoices are excluded here).
    If you want to use the credits on the banks completely you only have the possibility to create a payment separate for all banks.
    That means triple effort for this example.
    Thanks for your help
    Kind Regards
    Christian Dohmgoergen

    Duplicate post ..
    Re: Installing MW on different machines.

Maybe you are looking for