Several questions regarding an upgrade or replacement hard drive. Short dst failure error.

HP Pavilion DV6z-2100
Windows 7 64-bit
Short-DST failure error
1) I'm wondering if I can upgrade my hard drive to a 1TB and/or a 10,000rpm instead of the 500GB 7200rpm. Would there be any problems for either upgrade? What effect will the rpm's have (5400/7200/10000) and how do I decide which is best for me? Can I change from HDD to SDD? Can I change brands? What size (in inches or cm) must the new hard drive be? (See hard drive info below.)
2) I believe I can access (and open) all my files on the failing 500GB HDD. I want to install a second OS (Ubuntu) on my new hard drive, and I think the best way to do it would be to put Ubuntu on another partition. How would I go about copying my files to the new hard drive without losing any data and keeping my Win7 license? How would/should I partition the new hard drive? I can boot Ubuntu via a flash drive--can I make a Win7 recovery disk if Win7 won't boot?
3) How urgent is getting my files off the short-dst error hard drive?
Hard drive product number:
575476-001
Here's what's listed for hard drives on page 53 of the service and maintenance guide (PDF file):
http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSer...
(Apparently PDF file links can't be shortened by bit.ly.)

The following statement is copied from the Maintenence & Service guide for the HP Pavilion dv6 Entertainment notebook. for your notebook.
"Supports all Serial ATA (SATA) 9.5-mm, 6.35-cm (2.50-inch) hard drives".
Any first generation SATA 9.5-mm, 6.35-cm (2.50-inch) hard drive should work without issue. I do recommend that you use the Tune-Up utility in the HP Support Assistant to update your BIOS.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Several questions regarding File Vault

Hi!
I have several questions regarding File Vault - right now I'm using Mac OS 10.4.8
1.: The battery lock of my iBook is defect thus it happens from time to time that while transporting it the battery drops out while the laptop is sleeping. What happens with the File Vault-disk image?
2.: I want to (have to ) set up my Intel iMac again. The installer-CD I have will bring it back to 10.4.6
AFAIK the data format used for File Vault since 10.4.7 is version 2. What happens if I encrypt my stuff now (10.4.8 - thus version 2), back it up to my backup disc, install a new system (10.4.6 - therefore version 1) and want to access my data via Migration Manager (don't want to use archive and install)?
3.: How do I actually do a backup of my data while the system is running? The backup should be encrypted as well.
I use the demo-version of SuperDuper for backing up my system because with it I can ensure that I have a complete bootable backup of my running system.
Thanks for your answers in advance
ibook g4 12" 1.2 GHz 768 MB RAM / Intel iMac Core 2 Duo 17" 2.0 GHz 2GB RAM Mac OS X (10.4.8)

Parker,
You said:1. If it did, Apple would not use FileVault, as everyones computer will have a battery problem once in their life, and Apple would lose buisness from angry people who lost all of their data.I have seen enough reports of data loss with FileVault that I feel compelled to dispute your statement.
In Data corruption and loss: causes and avoidance, Dr. Smoke writes...If your data-security needs demand FileVault, you should backup your encrypted Home folder regularly, preferably daily. Like any hard drive or disk image, a Home folder protected by FileVault — an encrypted, sparse disk image — does not respond well to the causes of data corruption...Loss of power definitely is a cause of data corruption.
For Niels....,
An Unencrypted Look at FileVault, by François Joseph de Kermadec is an excellent discussion of the features, pitfalls, and cautions regarding Filevault.
Although the article discusses Panther and is dated 12/19/2003, the concepts as they apply Tiger have not changed.
The cautions and warnings are prominent in any of the Apple Knowledge Base articles referring to the use of FileVault. If a user is unfamiliar with any aspect of FileVault, it should not in my opinion be activated.
As good as FileVault is in protecting your sensitive data, it also presents the danger of locking up your files in an irretrievable ball of one's and zero's. Backups are critical. You must ensure that you have a comprehensive backup plan. Backup and Recovery, by Dr. Smoke is a fine example of what you need to consider.
;~)

Several Questions Regarding Educational Versions of Software

Alright, I have several questions regarding eduational software from Adobe. I will be attending school in the near future (now I am not enrolled in any type of school) and I notice that Adobe has huge discounts on 'educational software'.
What exactly is the difference between the 'retail' version of a program and an educational version? Do you need some sort of student ID to activate an educational version, or proof that you're in school, or anything special like that? I've noticed people selling unopened educational versions on eBay and from what I hear there are no differences between the software, but this makes me wonder... why the price difference?
Also, I plan on buying another Mac in the near future - probably for school. My second questions is - with this software (educational), can I put the programs on both my Desktop and my Laptop, or will they only work registered to one person on one computer? I've heard from people that serial numbers can only be activated so many times.
Final question. My hard drive recently crashed, and I lost a good bit of stuff and had to re-install everything. If this would happen again, can I re-install all of the Adobe programs to a new hard drive? Or am I going to encounter the whole 'serial numbers can only be activated so many times' thing?
Okay. I think that about does it. Any input would be great. Thanks.
-Mike

In terms of contents, there is normally no real difference between the retail and educational/student editions. There may be some extra fonts or clipart in the retail version, but this varies from release to release and from product to product.
You must qualify to purchase an educational/student version. Such qualifications are listed on Adobe's website. Normally you must provide proof of such qualification to whoever sells such software licenses to you. You cannot buy now on the basis that you will be a student in the future. You must have the student status at the time of the purchase.
Unlike retail versions, educational/student versions of Adobe software are not transferable. Sales of such "unopened" software on eBay should be regarded with suspicion. Authorized Adobe resellers do not offer software sales on eBay. The software is either stolen, used (but repackaged), or pirated.
Most Adobe software, including the Creative Suite software, may be simultaneously activated on up to two computers owned and used by only one individual. The second computer is typically a mobile computer if the first computer is a home computer for students. For retail, typically the first computer is one's office computer and the second computer is a mobile or home computer. The computers are not to be running the software simultaneously. And no, two students can't share a single copy on two separate computers.
The software may be activated and deactivated but after 20 or so such cycles, you will need to call Adobe and explain what's going on to obtain any additional such cycles. If you are activated on two systems and a disk drive or computer blows out and you need to reinstall the software without having had the ability to deactivate on the blown system, Adobe's activation support group will normally grant you an extra activation, assuming that you don't have a record of abusing the priviledge (such as claiming your disk drive crashes once a month!).
- Dov

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

Upgrading to a larger hard drive?

Hi everyone,
I'm considering upgrading my MBP hard drive to one that has more space and want to get more info to see how much of a hassle it would or would not be. I bought my MBP last February right at the end of the month when they had that slight upgrade in HD size and speed. It has the 2.4 GHz Intel Core 2 Duo and 2 GB 667 MHz DDR2 SDRAM and has a 200 GB hard drive.
I would like to upgrade to a 320 GB drive and was wondering if this is something Apple stores did? If not, does anything I do to the memory or hard drive automatically void the extended AppleCare plan that I have?
Also, are there official Apple-made internal hard drives or am I just looking at third party? And if so, are there certain companies that you recommend above others? I have always bought Western Digital externals.
And, if I upgrade to a larger hard drive, does that mean I should also upgrade to more RAM? Or is getting a hard drive with a higher number of rpm sufficient?
I did a search but wasn't getting many answers to these questions other than seeing that an Apple certified repair place can to do this. I actually found one near me that looks Apple certified, so I might give them a call. http://www.macprosolutions.com/
I was looking at this site: http://www.macservice.com/macbookpro.html but it's pretty pricy. Has anyone used this method to upgrade?
If you know of any FAQ/help sites or posts that you could direct me towards, that'd be awesome! This is my first ever Mac after years and years of WIndows PCs (and I'm never going back!), so I'm a but unsure how to go about doing this. Obviously, I'm just starting my research on what to get and how to go about doing this, but I'm trying to get an idea of price and how hard/easy it is. Thank you everyone!
Message was edited by: Rachel Whitfield
Message was edited by: Rachel Whitfield

You will find this link useful in regards to the question on warranty after upgrading the drive. Both answers over there are in my experience spot on.
So given that you will need to either use a third party service like TechRestore or do the upgrade yourself. (I recently did it myself and so have no experience with 3rd parties.)
To your other questions - Apple does not make their own hard drives, they use drives from other manufacturers. So you need to buy a reputable brand 2.5" SATA disk - Seagate, Western Digital, Fujitsu are the ones recommended most often.
You do not need to upgrade RAM in the computer to just upgrade the Hard Disk - those are totally different things.

My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

While we all have MacBooks in this forum most of us don’t use iCloud. There's an iCloud Support Community where everybody uses iCloud. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/icloud/icloud_on_my_mac

Upgrading 12" Powerbook G4 hard drive & OS X 10.5--please help?

So, I’ve decided I want to venture into upgrading my Powerbook G4 hard drive, RAM, and OS. Currently I have:
512 RAM
1.5 Ghz
80 GB 5400 HD
Mac OS X 10.4.11
What I would like to upgrade to:
1.25GB RAM (max)
1.5 Ghz
160-320GB 5400 (7200 if possible) HD
Mac OS X 10.5
Now here comes my questions. The RAM upgrade is straightforward. The HD upgrade seems simple enough when using tutorials on ifixit.com. I am wondering though, does the HD need to be ATA-100 or could it be ATA-133? Are DMA, Ultra DMA, UDMA, DMA-100, ATA, ATA-100, IDE, and EIDE all the same thing and all compatible with the 12" powerbook G4?
Assuming the hard drive speed is 5400 and I have RAM maxed out, are there performance differences between say a 160GB 5400 HD and a 320GB 5400 HD? Would it be better just to get the biggest HD that is compatible with my PB?
Also, FRYS.COM has "retail hard drive kits" and "bare HDs" What’s the difference between the two?
Finally:
Once I figure out which HD I want, I will have new: Hard Drive, RAM, and a Mac OS X 10.5 DVD Purchased from an Apple Store. I will install the RAM. Now I will be left with a HD and OSX 10.5 DVD...how do I get the new OS on the new HD?

The hard drive needs to be a parallel ATA 2.5" notebook hard drive. ATA-100 or ATA-133 or the others you listed don't matter. You cannot use a serial ATA or SATA hard drive, that's important. Here are two online stores and their parallel ATA drives available: http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=2010150380%201035907 889&name=ATA-6 and http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ (Click on 2.5" ATA laptop drives).
You'll note there aren't any 7200rpm drives listed, as they aren't made anymore for the parallel ATA interface. Choose whatever size works for you, and if increasing the size, make sure you have capacity to backup the new, larger hard drive, as you fill it up.
You only need the bare hard drive. There can be a difference between a retail boxed version versus OEM, as the warranty can be different, but that's about it.
After you install the hard drive, you insert the first OS X disk in the system, boot holding the C key down (so the system boots from the disk), choose Disk Utility from the menu bar, and partition the drive. Once done, you can do the OS X installation. If you don't hold the C key down and the system wants to install OS X, after you tell it what language you want, as soon as a menu bar appears, then you can run Disk Utility.

Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

Re: My Macbook 2009 model was recently upgraded with a new hard drive and upgraded to Mountain Lion OS. I am battling to retrieve all my photos that were ''saved'' in iCloud. Can someone help?

If you are trying to recover photo stream photos, they are only held in iCloud for 30 days. All you would be able ro recover is photo stream photos from the last 30 days.
If you have an iOS device that still has the photo stream photos one it, you can save them to the camera roll by opening the my photo stream album, tapping Edit, tap the photos, tap Share, tap Save to Camera Roll. Once in the camera roll, they can be imported to iPhoto on your Mac as explained here: http://support.apple.com/kb/HT4083.

Recounting My Successful Experience Upgrading My Solid State Hard Drive

I just successfully upgraded my solid state hard drive from
60 gigabytes to 256 ; the machine is a Lenovo T400s - while the upgrade is
still fairly fresh, I thought I’d share my experience – maybe someone else will
benefit – most of what I’m about to relay was provided by Zoltanthegypsy and
GMAC-R60 – I thank them again for their advice - but I will try to add some
additional thoughts based on my experience – for the most part I was able to
use the tools provided by Lenovo – my original hard drive had 3 partitions, S
(system), C ( windows + my programs & data), & Q ( Lenovo stuff like
backup and restore, the factory copy, etc.) :
Create a “factory state” copy of the machine to
DVD or CD soon after purchase – I say soon after purchase because it appears that
a minimum amount of hard disk space is required – my 60 gig was almost full and
I got a message that there wasn’t enough space – I can still make the copy but
I’ll have to move some things off temporarily – this step isn’t really related
to the upgrade but it is a good idea – Start/Lenovo ThinkVantage Tools and you’ll see
the option – and as Zoltanthegypsy has pointed out you will most likely not be
able to do this from the new hard drive after the restore operation covered
below – I haven’t proven this out but I do know that my Q space on the new
drive is smaller than before – something was lost and it’s most likely the
factory state – and so keep the old hard drive long enough to make that factory
state copy to DVD or CD.
The next step was a full backup to a Lenovo
external hard drive – it came with one partition - the external that I got from
Lenovo has a small keypad and is password enabled – this fact will come into
play further on – as GMAC-R60 noted a pop-up will appear giving the option to
create rescue media – you want to select this option so that the external will be
bootable.
When the backup is complete you want to swap hard
drives making sure to first unplug & remove the battery .
There may be other ways to do this next step but
here’s what I did – I powered on the machine and let it go through what
appeared to be a BIOS routine – note that my external was attached to the
laptop but it wasn’t activated by keying in the password – after the BIOS
routine was finished I activated the external by typing in the password and then
did a Control/Alt/Delete – the machine restarted and booted from the external –
with hindsight I probably could have connected & activated the external
before powering on but the instructions that came with the external suggested
something different which didn’t work for me .
I was now able to go into rescue and recovery
and do a complete restore to the new drive – but to my surprise the extra space
that I bought with the new drive ended up all in the Q partition – and Windows
Disk Management didn’t enable me to reallocate the space to C.
And so I purchased Disk Director 11 Home by
Acronis – a $50.00 investment in a tool that I’ll probably never use again but
I’m now able to use an $800 solid state drive rather than trying to recoup some
money via Ebay -– within minutes I was able to reclaim the space and I now have
enough C space to last the lifetime of the laptop – especially since all
pictures go on a stick & my demographic isn’t into video games .
One useful piece of information that I got from
a user on the Acronis forum was that all of the Lenovo tools like rescue and
recovery, etc. are available for download from the Lenovo website – and so if worse
came to worse I could have deleted that Q partition, stretched C using Windows
Disk Management , and then downloaded the Lenovo tools into C.
One thing I’d like to learn to do would be to
perform all the steps outlined above but without using the Lenovo tools – using
Windows 7 tools instead but not having a Windows CD , i.e. how do you boot

It went something like this:
(On the stock drive)
Plugged in a blank USB HDD, and a blank USB flash drive.
- HDD formatted in NTFS, flash drive in FAT16.
Ran the recovery media creator.
- Created bootable media on flash drive, and put the recovery image on the HDD.
Once done, shutdown, removed the battery, swapped the drive for a 500GB Scorpio Black (freshly NTFS quick-formatted). USB HDD and flash drive were still attached.
Booted, and used F12 to select the flash drive for booting.
It booted into the Windows Recovery Environment and I chose the Lenovo restore factory image option at the bottom of the list.
From there on out, I just clicked through the wizard, and it restored.
Upon finishing, I unplugged all of the external media, and had it restart. It then booted into OOBE as expected.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

After upgrading to a new hard drive, I can't drag songs to my ipod

I can only play them on my computer. I get an error message "itunes could not copy...because an unknown error occurred (-50)
Any clue what to do?
Just to complicate matters further, I'm going to move all my data back to the first hard drive next week (long story)

After upgrading to a new hard drive
How did you get everything onto the new hard drive?
I'm going to move all my data back to the first hard drive
So you deleted it from the original hard drive?
How do you plan to get it back to the original?

How much does Apple Charge to upgrade a 13" MBP Hard Drive?

How much does Apple Charge to upgrade a 13" MBP Hard Drive?
Laptop is about a month old - And I desperately need a hard drive upgrade (at the time of purchase could not afford).
Thank you so much!
~aj

ajsonnick wrote:
I was told though that doing this voids my warranty with apple on my computer?
You were told wrong. Apple considers the hard drive and RAM to be user-replaceable parts. If they didn't, they wouldn't provide instructions for changing them yourself.
What type of HDD would you reccomend me purchasing? Looking to get something 750GB+
I favor Seagate. Others have different preferences. Avoid so-called "green" drives.

I have several versions of itunes on my computer and hard drive. My itunes library has become mixed up with my husbands how can i fix this?

I have several versions of itunes on my computer and hard drive. Now my itunes library has become mixed up with my husbands how do I resolve?

assuming the copy files ... when adding option is checkmarked in preferences > advanced, drag the folder into an open iTunes window while holding option (⌥).

Several question regarding kde4

Hi!
Yesterday I have upgraded kde to 4.1 version. I am quite happy with it, but I have several questions:
1. Is there any way to organize icons on desktop? In KDE 3 we had "Snap to grid" and was ok. Now they are freely mixed on desktop.
2. I am missing some KDE 3 styles (like domino). And now Qt3 apps uses basic Qt styles (which are awful). Trying to install it from pacman results in error, because styles require kde3-base.
P.S. I rather don't like default theme for KDE4. I miss some nice and polished window decorations and styles and of course grayish gray and more gray color schemes .

I heard about but didn't test Folder view (for managing icons on desktop). Also you can right click on applications in the menu and tell them to be put on the desktop. Or at least it worked before, with the first kde-workspace package merged. Unfortunately I cannot test now, since I'm on a win desktop at work.
Last edited by ckristi (2008-07-31 13:10:06)

Several questions regarding aperture 1.5.2

hi.
I am a new mac user (just started using several days now), and apparently Aperture.
One of the reason why I switched to Apple is Aperture and future CS3. In any rate, I have these questions if anyone can answer.
First, my spec is as follows.
Mac Pro/2.66Ghz/5Gb/250GB+320GB HD/ATI X1900 Video Card.
1. I have imported about 4000 images into Aperture library. I liked the idea of vault and backing up to another device/hd for safety. Now that I have about 4000 images, the photo editing has SLOWED down dramatically. What I saw the changes immediately, now I have to wait 1 or 2 seconds before I see the result. Is this normal? I am worried that if I import another batch of photos from another HD, it'll slow down even more. How can I improve the overall responsiveness and performance of Aperture?
2. Is there a way to export entire library/project/folder from Aperture Library back to hard drive? I tried export, but it seems to export only individual photos. I wouldn't want to repeat the process 4000 times in order to export the master files back to the external HD in its original format. Is there any way?
I can't seem to locate the color management/profile setting. Is it default to AdobeRGB or Proofing is what it is?
Thanks for any response in advance.

Hi and welcome.
1) Is Aperture processing previews? This takes a long time after import (hours), and it will slow the overall responsiveness of the machine down. If you don't need the previews, you can turn them off. Be aware you have to do this in more places than just the preferences, you have to click the "action" gearwheel and disable them. See if Aperture is burning CPU cycles generating previews.
2) Yes. Select a project and export it. Perhaps you have some photos selected and not a project. Ensure you don't have photos selected, and click specifically on a project in the list. Under the Export menu item there should be a "Project" option.
3) The default color space used by Aperture is "large." It is larger than Pro Photo RGB according to Joe Schorr. When you export a photo, only then is a color space applied (this is in general a good thing -- artificially limiting the color space to something as small as Adobe RGB could cause banding during editing).
I would suggest you not use onscreen proofing except for when you plan to print -- it often has some strange effects which will show definite posterization.

RE: Memory Upgrade Confusion and Second Hard Drive Recommendations ?

Hi,
Afraid I'm a bit confused with what would compatible and what wouldn't and was hoping I might get some advice. I want to increase memory by about a GB on my Power Mac G5 (spec. copied below purchased UK early 2006). I understand that once you have the right cards (two installed in parallel) that its quite straight forward. I searched the apple site and the cheapest it gave me for my model for 1 Gb was:
Apple Memory Module - 1GB DDR2 533MHz Non ECC - 2x512MB DIMMs
at £140
http://store.apple.com/Apple/WebObjects/ukstore.woa/91234046/wo/hn5g4hFDfgHw3aTb YlYSoSb9duX/3.0.28.9.5.9
Then Micro Ankiva quote this and I assume here I would need four of them to get the 1 GB. Also though not sure if this would be compatible ?
Apple 256MB PC3200 DDR400 DIMM Desktop Memory 184Pin
£25 x 4 so £100
http://www.microanvika.com/product.asp?PNO=MAC57117
Then finally I came across these guys at Mac:Upgrades offering this which again I assume I would need 2 of them (they said these are compatible but I'm dubious because they are so much cheaper?)
Kingston DDR2 PC4200 DIMM - 512MB
£17.11 x 2 so £cheap !!
http://www.macupgrades.co.uk/store/productinfo.php?productsid=199
Here is my spec.
Machine Name: Power Mac G5
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.0)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 1 MB
Memory: 512 MB (2x 256 MB DDR2 SDRAM PC2-4200U-444 OK)
Bus Speed: 1 GHz
Boot ROM Version: 5.2.7f1
Serial Number: CK6100AVV5V
Any advice on this is hugely appreciated.
Finally while I'm here I figured I may as well ask for recommendations from people with regards reliable second internal hard drives. Ideally I'd like to go for 500GB - I currently have 160 GB. Would this be possible with what I have - I read (though not sure correctly) that maybe only 500 Gb in total is possible. Anyway any pointers on this too gratefully received.
Thanks
Phil

Hi MrJax
Couldn't find your machine via the serial number on apple support pages. Is it a DDR2 G5? 8 slots - max 16gig ram - PCI-X? If so its the same as mine and I'm just looking to upgrade my ram after having some shoddy old dimms die on me! Many thanks to the reseller that did me on that one!!!
RAM can be a real conundrum, clock speeds and CL's...very confusing. Keep an eye on my post as well as I'm researching what to install as well. Keep in mind whatever you have in there will affect the speed of new RAm you add, so adding faster RAM than what's already there its pretty pointless.
In the past I've always gone with Crucial RAM. I've installed it on several machines over the years and its always been very reliable.
I've just moved abroad and so can't buy Crucial here so will be going for Kingston this time round, just not sure which exact dimm type yet.
Kingston have a better warranty situation than Crucial (think crucial is a year) and from what I've heard, from people who should know, it's very good RAM. Both are really cheap and to be honest whichever you go for buy it from the manufacturer. Crucial deliver really fast, as i said I've always bought from them and never had an issue. Even one time when I thought the RAM was dodgy they sent me a replacement without any problem! Both Kingston and Crucial walk you through the Ram options on their websites, its very straight forward.
I'll keep you posted on how the Kingston RAM shapes up
As for HD's. My advice is to go for a Western Digital drive. If you're in the UK then hit ebuyer.com Great prices.
Hope that helps.

Several questions regarding an upgrade or replacemen​t hard drive. Short dst failure error.

Similar Messages

Maybe you are looking for

Several questions regarding an upgrade or replacement hard drive. Short dst failure error.