Several T410 - Fingerprint blinks - Login not possible

I have three brand new T410 all with the same problem. I never had problems with domain login with the older T400 or the W500/W510. What is happening? I have W7 64bit with SP1, all updates (incl. Lenovo) installed. Fingeprint is registered, light is on. When I scan my finger the light goes off, then blinks once and then it's on again. No login... I have to use my credentials. What is wrong? Thanks Rob

I get a similar issue
I get the USB malfunctions error on numerous occasions for the fingerprint reader .
When i check device manager the biometric device is not there 80% of the time. And the icons in the device manager continually flash.
I have had my fingerprint reader (the board that it is on) replaced on one occasion, this fixed the issue for one day and then it started behaving as it did previously.
I have installed new drivers found on UPEK but this did not fix gthe problem.
I am wondering if it is a powering issue from the USB hub??
Additionally:
When i come back to my computer after a while and it has entered sleep mode. The fingerprint reader light is on and allows me to swipe my finger once. After this one occassion it then turns off.

Similar Messages

  • Sap license error--error is "login not possible (error in license check)u0094

    Hi,
    I we are not able to login in our IDES r/3 system, it is showing “login not possible (error in license check)”, only sap*  is able to login . I have already applied sap license that will
    Expires on 31-12-9999, I have old license also it was expired on 07-02-1996 it is under red light, second one under green light.  I tried to del old one but system says through sap* not possible, only sys admin will do…..what I can do now..

    Hi,
    When your license expired you can only login to the system with SAP* user.When you are login using sap* and deleting old license you will get a popup with this  message <b>SAP* WHEN THE VALID SYSTEM LICENSES HAS EXPIRED,ONLY THE SAP* CAN LOG ON TO THE SYSTEM.IN THIS CASE,IT WOULD BE DANGEROUS TO LICENSE
    THIS IS WHY THE SAP* IS NEVER ALLOWED TO DELETE A LICENSE</b>
    So can cannot delete the expired license with SAP*.If u want to delete means try to login with <b>dilog user</b> and go to slicense T-code.
    Select the expired license in menu goto EDIT->Delet license(shift+f2)
    kiran kumar.v

  • Console mode, login not possible

    Hi all,
    I'm using OS X Yosemite and want to login as ">console" to open a terminal based access to my Mac.
    The console login appears a few seconds and afterwards in turns in a black screen only showing the mouse pointer. It is not possible to enter my username ans password when the login line appears. Therefore, it is not possible for me to login into the system. I have to do a hard reboot.
    Is there a possibility to fix this problem? I just want to login without the GUI.
    Thanks,
    markus

    Once you are in the web browser:
    You can log in by using:
    -Portal URL.System will ask you email as ID
    -URL that directs you to ITS( is an URL that contains the string BBPSTART).System will ask you your user ID, PW and  client.
    My point is to check if ITS is working and portal not.
    Thanks and Regards,
    Abraham

  • VNC login not possible from Sol 11 Express login

    Hello,
    after booting the machine the login prompt is shown (no auto - login)
    I want to connect using vnc - however this is not possible.
    Only after logging in locally vnc is working as expected...
    Bye

    How about this?
    - Use remote login, such as ssh
    - Set a VNC password with vncpasswd
    - Start VNC-Server, for examle "vncserver :1"
    - Access VNC remote with a VNC Client, for example "vncviewer <host-ip>:1"
    C.

  • Error M8-688 - Creation of several vendor line items is not possible for document type RN.

    Hello All,
    We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
    Thanks,
    Chandu.

    I dont think that there is any way because it is a hardcoded error message.
          IF NOT t003-xnetb IS INITIAL.
            MESSAGE e688 WITH pi_rbkpv-blart.
          ENDIF.
    SAP is checking the customizing for net/gross posting per document type in table T003
    And if it is set up as net, then it is a hard error.

  • T410 Disco Blinking Show - Not Booting

    MODEL - T410 - 2516CT0
    OS - W7 PRO 64 Bit
    Hello all,
    was working on the laptop without any hitch (Last program was scanning using a legacy Canon Scanner 1240U via XPMODE), put it into hibernation, no issue, project complete.
    Hours later on trying to switch it back on via the fingerprint sensor or power switch, all the LEDs power up including the think light for a second then off for a second, on again, repeatedly doing that with out booting into the BIOS. Sensed trouble!
    I have tried some suggestions posted here like resetting via the draining the CMOS battery, removed all the RAM chips, hard
    drives,  checked USB pins to no avail,  whilst the disco light blinking is entertaining, I really need to get back to work!
    It seems I am always back here a month before my warranty peters out ! The last time was with my T61 and its NVIDIA chip issues, Lenovo?  There must be a better way to prompt for purchasing an extended warranty ; )
    Any ideas people will be really appreciated, my hard drives are locked and so am I untill the show ends, HELP!
    PS - The laptop has in the recent past had one or two stop 000000x07 BSDs

    Update for other users;
    I let the light show continue for some time.
    Noticed a pattern, lights blinked four times per second then paused for two seconds, all LEDs go off except power switch then cycle restarts.
    Let this run continuously with out interuption for 4 cycles.
    Power LED remained on, cycle stopped.
    Powered off using power switch.
    Powered back on using power switch and BOOT ! Thank you angels!
    It still does not explain what the h*** is going on here!
    In bios now unlocking my HDDs, dont want such a fright again! Still need help as to what happened here to prevent it happening again.  Notwithstanding, if it was a Thinkvantage way to prompt me into purchasing an extended warranty, it has worked! Buying it now.

  • Trans. launcher: system login not possible

    Hi,
    I configured the tx. launcher and was able to logon to the ECC system and execute required transaction (VD03), however somehow I am not able to login to ECC now, it prompts me for the password over and over again. RFC's are working fine , HTTP service running on both systems and no changes were made to the launcher settings. Is there an authorization object required for this ?
    Has anyone faced a similar problem ?? any solutions please!!
    Secondly, do we need Single Sign On to avoid the login screen ?
    Regards.
    PS: It is possible to logon to ECC from the GUI
    Edited by: Jacob Raj on Nov 8, 2008 12:52 PM

    I've tried to login to ECC through the http service running within ECC and its successful but CRM to ECC login is not happening.
    possible reasons please !

  • AFP login not possible, OD error?

    Dear all,
    since Monday some of our users have the problem that they cannot access the file server with their user credentials. This does not affect all users, only 3 out of 18.
    The setup is:
    Mac OS X Server 10.6.8 running on an Xserve 1.1 (file server)
    Mac OS X Server 10.6.8 running on an Xserve 2.1 (OD server)
    Clients (Mac mini, iMac) running 10.9.4
    The user accounts are managed on the OD server, the OD is replicated on the file server. This affects one newly created account (on Friday, login was then possible) and two accounts that already existed for half a year or more.
    When I log in with a working account, /Library/Logs/AppleFileService/AppleFileServiceAccess.log shows up the following line:
    IP xxx.xxx.xxx.xxx - - [04/Sep/2014:11:08:21 0100] "Login [user name]" 0 0 0
    When I log in with a working account using a wrong password, the following lines appear:
    IP xxx.xxx.xxx.xxx - - [04/Sep/2014:11:10:30 0100] "Login [user name]" -5023 0 0
    IP xxx.xxx.xxx.xxx - - [04/Sep/2014:11:10:30 0100] "Logout [user name]" -5023 0 0
    AFP error 5023 means "AFP User not authorized" which makes perfect sense.
    When I log in with one of the accounts that now don't work, only the following line appears:
    IP xxx.xxx.xxx.xxx - - [04/Sep/2014:11:15:53 0100] "Logout [user name]" -5023 0 0
    So there is no login logged.
    However, in the log I can find the following lines:
    IP xxx.xxx.xxx.xxx - - [03/Sep/2014:22:11:08 0100] "Logout [user name]" -5023 0 0
    IP xxx.xxx.xxx.xxx - - [03/Sep/2014:22:11:29 0100] "Logout [user name]" -5023 0 0
    IP xxx.xxx.xxx.xxx - - [03/Sep/2014:22:11:50 0100] "Logout [user name]" -5023 0 0
    IP xxx.xxx.xxx.xxx - - [03/Sep/2014:22:12:10 0100] "Login [user name]" -5019 0 0
    IP xxx.xxx.xxx.xxx - - [03/Sep/2014:22:12:10 0100] "Logout [user name]" -5023 0 0
    IP xxx.xxx.xxx.xxx - - [03/Sep/2014:22:12:31 0100] "Logout [user name]" -5023 0 0
    This happened obviously after the user has logged out and Mac OS is trying to sync the mobile account with the credentials that have problems. Error 5019 means "AFP Parm error". I manually aborted the sync after hours. When the users tried to log in the next morning, also an error -5019 followed by a -5023 appeared in the log. Error or warning messages did not appear to the users while logging into their accounts.
    Changing the passwords did not help. Disabling and re-enabling the accounts in the OD did not help. Restarting AFP services did not help. As for AFP, the users can use different credentials, but for the mobile accounts this way is not appropriate.
    What I did on Sunday was shutting down the file server, removing the hard disks and testing a spare Xserve 2.1 with the system. Then I put back the drives into the Xserve 1.1, which is running as the file server since then. Could that be the cause? Other changes (system updates, config changes) have not happened.
    Thanks in advance,
    Andreas

    Andreas,
    Did you ever find a solution to this?
    I have pretty much the exact same issue.
    Regards
    Ben

  • Local user got deactivated - login not possible

    Hi all,
    I have a Macbook using an user assigned to a domain and two local users also which are not assigned to that domain. I never had any issues so far and also assigned all three users as administrators.
    Just now after I have used the domain user and wanted to logon to one of the local users, the password has not been accepted and a message stated that the user gots deactivated and I should contact the system administrator. I tried also the other local user and the same message appears.
    I tried several things like disconnect from any network, removed the domain at the user settings, restarted several times but nothing helped. What is also very odd is that the checkbox for the quick user change is deactivated and cannot be checked.
    Anyone had this also and knows a fix for this?
    The system runs Mac OS X Yosemite 10.10.
    Thanks!

    Once you are in the web browser:
    You can log in by using:
    -Portal URL.System will ask you email as ID
    -URL that directs you to ITS( is an URL that contains the string BBPSTART).System will ask you your user ID, PW and  client.
    My point is to check if ITS is working and portal not.
    Thanks and Regards,
    Abraham

  • Management Studio Login not possible

    Hello,
    I use BB 10.2.1 and after the latest Update the Management Studio is not accessable. I cannot give in Login Name and Password because thies fields are missing. I only the the drop down menu "Log in using" an this is empty.
    Do you have any ideas?
    Thanks and regards.
    Doreen

    are we talking about BES server?
    how are you accessing BMS and what browser version?
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • IMessage login not possible

    Hello,
    I try to login into IMessage but unfortunately it rejects my request after a while.
    I do not think it is an firewall issue because another computer in the same network works quite well with iMessage.
    OS is Yosemite new installed on MacBook Pro (15", Ende 2011).
    Error says, "Login failed. Check your internet connection and try again what is crap.
    Has Somebody an idea?
    Greetings
    Hubert

    Hi,
    Double check the following as well:-
    System Preferences > Date and Time.
    This should have the current Date and Time Zone set correctly.  It should also use the Automatic Time Servers as everything needs to be in Sync with the internet for Time Stamps and this starts at the Login stage.
    As it works for another computer you should not have to check your Routers is set to the same Time Zone and Date Settings.
    In the Network section use the advanced Button > DNS tab.
    This should show the router's DNS IP addresses passed from the router.
    A LAN IP such as one starting 192.168.x.x or 10.x.x.x only pints to the routing device and is probably not good enough.
    If they are not appearing automatically (and greyed out) then add them manually or add Public ones. (http://pcsupport.about.com/od/tipstricks/a/free-public-dns-servers.htm).
    In the Apple Menu top left of the Screen use this About this Mac item.
    In Yosemite more info appears here than in previous OS versions.
    Check the Serial Number of the Mac appears.
    If it is Missing then you will have to visit an Apple Store  to have it put back.
    It can go Missing if the logic/Mother board has ever been replaced in a refurbishment or repair where the engineer has not "flashed" it back to the new board.
    This is used by the App and with your password creates the IDS: YourAppleID-Auth Token that appears in the Keychain.
    Open Keychain Access in Applications/Utilities and check the list for this item.  (it may not have been created yet if this Mac has never managed to Login)
    8:16 pm      Friday; January 16, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • After login to the e-bank on line of the Eurobank EFG in Serbia error message: "Keyboard Navigation Disabled." appear and furthur work is not possible.

    This problem started about 10-20 days ago.
    After login to the e-bank on line service of the Eurobank EFG Serbia further work is not possible because the screen became gray and an error message appear: Keyboard Navigation Disabled.
    I run the laptop on Win 7 Professional - 64 bit Service Pack 1.
    My default web browser is Mozilla Firefox 21.0.
    Alternative is:
    - Internet Explorer 10
    Version: 10.0.9200.16576
    Update Versions: 10.0.5 (KB2829530)
    I have scanned my laptop and cleaned few fond viruses. Have uninstalled and installed again Java so now I have:
    - Java 7 Update 21
    - Java 7 Update 21 (64-bit)
    I have uninstall and reinstall Firefox.
    Result is that now I can run e-bank online in IE but not in Firefox.
    Customer support service from the bank told me that the problem is related to the browser...

    Problem still exist - looking for a solution.
    You may see how this appears on the screen at the attached picture.

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • After Mavericks update spotlight search menu gone, not possible to use spotlight at all

    Hello,
    I updated last week to Mavericks and since the update Spotlight is completely gone.
    It's not possible any more to get to the spotlight search at all. I checked the Spotlight in the preferences the keyboard short-cuts (apple default) are still enabled but nothing happens.
    Even the spotlight magnifier icon in the menu bar is not there any more.
    Can anybody help?

    Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Back up all data.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
    sudo find ~ $TMPDIR.. -exec chflags nouchg,nouappnd {} + -exec chown $UID {} + -exec chmod +rw {} + -exec chmod -N {} + -type d -exec chmod +x {} + 2>&-
    This time you'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button
    Select
               ▹ Restart
    from the menu bar.

  • Preprocessing Roadmap Orinial system locked / logon not possible

    Hi All,
    I am currently working on the upgrade from CRM 2007 to CRM 7.0 with EHP1. I am runinng the synchronus upgrade and currently in the Preprocessing ROADMAP (Phase Name MAIN_SHDIMP/DIFFEXPADDI ).
    Indeed, we have completed the SPDD / SPAU modification as well. And my question is, I am not able to login into the orignal system and its telling it as Upgrade is running logon not possible. (But this should happen only in the downtime roadmap - because I have done several ECC upgrade) . When preprocessing completed, we will obtrain downtime from the customer and we will start with the downtime roadmap.
    But in CRM, I didn get any message or warning like that, I just gave confirmation for modifcation of SPAU / SPDD in the preprocessing roadmap. After few hours, I am not able to login into the originals system itself. Even I could see that there is no shadow system existing in the MMC as well. I am clueless here about the status and howcome it could happen like this ?
    In short : My question is, downtime will start after giving confirmation in SPAU / SPDD?
    Also I have unlocked  / locked the shadow system earlier for some activity in the shadow system. Does that mean accidentally it locked my  original system.
    If anyone of your have any suggestion please do let me know
    I have used the below command to unlock the shadow system...
    tp unlocksys SCR pf=G:\SCR_UPGRADE\abap\bin\TPPARAM
    SAPup.exe unlockshd SCR
    tp locksys SCR pf=G:\SCR_UPGRADE\abap\bin\TPPARAM
    SAPup.exe lockshd SCR
    Regards
    Vijay

    Hi,
    However, I have unlocked the same to access the original system. But wondering is the behaviour of the tool itself to lock the original system in the preprocessing stage itself?
    Used command for unlockign the orinal system
    tp unlocksys SCR pf=G:\usr\sap\trans\bin\TP_DOMAIN_SCR.PFL
    Regards
    Vijay

Maybe you are looking for