Sh command on router to list errors not working?

If I do show int I get a bunch of stuff but of interest is the ser int.
Serial0/0/1:0 is up, line protocol is up
Hardware is GT96K Serial
MTU 1500 bytes, BW 1984 Kbit, DLY 20000 usec,
     reliability 246/255, txload 24/255, rxload 31/255
Encapsulation PPP, LCP Open, multilink Open
Link is a member of Multilink bundle Multilink1, loopback not set
Keepalive set (10 sec)
Last input 00:00:00, output 00:00:01, output hang never
Last clearing of "show interface" counters 01:02:02
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: weighted fair [suspended, using FIFO]
FIFO output queue 0/40, 0 drops
5 minute input rate 245000 bits/sec, 121 packets/sec
5 minute output rate 192000 bits/sec, 93 packets/sec
     255332 packets input, 70638127 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     20523 input errors, 20521 CRC, 3464 frame, 300 overrun, 0 ignored, 3453 abort
     196752 packets output, 41054966 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
I want to filter this for errors so I try;
sh int counters errors
and I get nothing? I was expecting 20523 errors...

That will work and I that's what I do already. However why doesn't
sh int counters errors
show any errors. Comes back blank, nada.
Ultimately I want to just show iterfaces that have errors using somthing like
sh int count error | i _[1-9]+
But the basic command doesn't work as expected.

Similar Messages

Site list update not working with TED and Zenworks for Servers

Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
Regards

Andreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

Command Link in ADF table is not working/ PPR event not getting fired

Hi All,
I am having ADF Table, in that one column is with command link if click on command link, it is not navigating to corresponding page or method of a bean. If i give same command link out of the table it working fine, this issue i am facing is in IE9.
if i use IE in compatibility mode the links works fine, even in IE8 version also.
Browser: IE 9
Jdev version: 11.1.1.5.0
I tried all possible things, but nothing workout for me.
showPopupBehavior not working in IE9 for af:table buttons (jdev11.1.1.5.0)
Partial page rendering not working in ie9
Command Link in ADF table is not working
Thnks

Hi,
please file a bug if you have a customer support contract and provide a testcase
Frank

Select list pagination not working for big tables

Hi,
i am trying to view a table with large amount of data using tabular form. the pagination using select list is not working in this page. i have selected select list kind of pagination but it is showing "row range 1-15 16-30(with set pagination)' type of pagination. when i lowered the amount of data in the table the pagination type will automatically change to select list pagination. could you please tell me why this happens and any possible work around if any.
Thanks,
Jo

Hi Jo,
I don't know what you call a large amount of records, but the effect you describe might be intentional by apex.
The select list pagination would generate a selection tag with (number of records in table/15) options in your page HTML.
Although there isn't a hard limit to the number of options a select list can have there certainly is a limit to what your browser/pc can render.
Think about it
Let's say you table contains a million rows. this would result to a select list with 66666 options. Which your browser won't handle :)
I very possible the apex team resolved this by simply reverting to row range pagination when the number of select options would grow to large.
Geert

Command-Z keyboard menu shortcut is not working

Hi
Command-Z keyboard menu shortcut is not working in my profile i.e.,my login. But able to execute the same keyboard shortcut in other profile. ALl the other menu keyboard shortcuts are working fine. Have tried deleting Universal Access, HotKeys,Finder Preference plist,. from ~/Library/Preference/ folder. But of no use. This shortcut is not working for any of the app.
Thnks

ok will try that and will let you know.. But the undo keyboard shortcut works well in other user profile.

Where used list is not working for IMG nodes/Document in solar01

hi experts
In template project , we are using same IMG objects in different business processes and subsequent configuration document is attached to each IMG node in configuration tab. ( like same IMG node - define order types used in different business process configuration tab )
when i use " where used list " from the configuration tab , its not showing the IMG objects used in different business processes in the same project. whereas its showing the IMG nodes used in the different project.
I need to find out the same IMG objects/ document used in the same project using the " Where used list " button.
Please provide your answers
Note : we have linked one configuration document to same IMG nodes used in different business. " where used list " also not working for documents as well
Thanks
Sol man

Hello there,
I just tried some tests and couldn't face any problem with locating other usages for the objects in configuration tab.
You mentioned a configuration document, so have in mind that the document usage will only be considered if it is a link to the same document and not just a copy.
e.g:
Here I created a document in this node:
Then I added it as a link here:
and as a copy here:
When I go back to the original node and use the where-used, it'll only show the original and the link:
This happens because after copying a document, it is considered as a new one instead of another usage of the original one.
best regards,
Fabricius

How do you do anchors - the three ways listed did not work. I am using the jQuery mobile template 11. I want to link to a spot on the same page.

How do you do anchors - the three ways listed did not work. I am using the jQuery mobile template 11. I want to link to a spot on the same page.

How do you do anchors - the three ways listed did not work. I am using the jQuery mobile template 11.
You have aroused my curiousity, what are three ways listed that do not work? At risk of being labeled as an ignoramus, could you also tell me where to get the other 10 templates?
I usually give an element an ID and use that in my link as in
<a href="#mySpot">Go to my spot</a>
<div id="mySpot">
</div>

Bought a new router location services will not work hooked up old router location services came right back on

bought a new linksys router location services will not work on i-pad hooked old router back up and it started working again linksys was no help

WiFi iPads determine location through a database of router locations. Your new one is not in the database, give it some time and it will be added.

Diskpart List volume not working in Windows 7

Hi
Im trying to run diskpart-List volume command using System Exec.vi in LabVIEW 2010 in Windows 7 32-bit/64-bit.
When i try to run this command through script text file in Windows XP, I could get the Standard Output String with volume informations in detail.
But the same VI doesnt work in Windows 7 32-bit/64-bit. i.e., Standard Output string is empty
I have attached the VI and Script text file.
Suggestions/Solutions are welcome.
Thanks in Advance,
Charu
Attachments:
System Exec_diskpart_List volume.vi ‏9 KB
Script.txt ‏1 KB

Hi,
what does this command returns ? The list of files in your C:\ ?
There is an OpenG function which make the same thing (list recursive folder), but not sure it's what you're expecting...
Regards,
V-F

Create a project from list item not working if EPT has Project Plan Template

HI,
i am trying to leverage the new feature in 2013 to create a project from an idea list.
This works fine if the EPT does not have Project Plan template assigned to it. Even through workflow action "Create Project from current list item".
However if i assign a project plan template and the user creating the project  is not Administrators Group member, i get an error. While doing this trough a workflow the worfklow gets suspended and i have the below message:
RequestorId: 654a6744-eb11-3d9c-0000-000000000000. Details: RequestorId: 654a6744-eb11-3d9c-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 403
{"error":{"code":"20010, Microsoft.ProjectServer.PJClientCallableException","message":{"lang":"en-US","value":"PJClientCallableException: GeneralSecurityAccessDenied\u000d\u000aGeneralSecurityAccessDenied"}}}
{"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["290"],"SPRequestGuid":["654a6744-eb11-3d9c-9d1e-ff8135e50f19"],"request-id":["654a6744-eb11-3d9c-9d1e-ff8135e50f19"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4535"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Wed, 23 Apr 2014 14:40:46 GMT"],"Server":["Microsoft-IIS\/7.5"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context)   at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Any one has experienced this ?
Thx

Hi, RonyZ.
I think it could help.
I have experienced the same problem as you are, except "Create project" option, my managers could do it.
So, for me a solution was to set definite permissions for Workflow Initiators (I have created new group, but you can edit, including
Global permissions
New project
Open project template
Server configuration management
For category “My organization”
Open Project
Publish Project
Save Project on Project Server
Excuse me my translation, some names can be written not properly, cause I have localized SP.
In you case, I think, you should check, if you PM group has all these permissions.
And Workflow Initiator should be in group which has.
In LOGS error notifications starts with “Permission denied”, then goes account
name and then the name of permission which is left.

Command button onclick="history.go(-1)" not work as back button

Hi,
I'm using Jdev 10.1.3 on WinXP running standalone oc4j.
Does anyone has experience in implementing command button with onclick="history.go(-1) ? Mine did not work as a back button. It simply stayed on the same page.
Any idea?

cor-el, I started Firefox in the Safe Mode as recommended. It looked and worked fine. Same after I closed and reopened it. As suggested, I shut down and restarted and so far it is operating "normally." Pages open on the first try and the back button works just fine. The double headers are gone and all my Bookmarks are in place. I did not change any settings or stop any functions (add-on's, etc).
Hopefully this has solved the issue. Only time will tell. Thanks for your help. I also have a long list of other things to try from Safe Mode if the issue returns.
I appreciate your prompt help. Larry.

Yahoo mail new style - My contact list will not work on FIREFOX anymore but does on IE

on Firefox 5 my contact list will not load and cannot be used
the address bar goes haywire if you make a mistake , making it difficult to amend or correct - ie. sends mail to draft's box - will it be fixed anytime soon or do i need to use IE for Yahoo Mail now they have cancelled old classic version that worked reasonably well on firefox

Me too, 23 July 2011. Can get YahooMail contacts in IE but not in Firefox. What is going on and who will fix it?

Button order and routing from PS menu not working

Ugh, this is driving me crazy.
When authoring a Blu-ray, I've gone through the same steps since I started but all of a sudden the menus I'm creating in PS CS5 for Encore CS5 are not working and for the life of me I can't figure out why.
The problem I'm having is that I set everything up in Photoshop then import the menu into Encore however when using the navigation of a remote, scrolling down skips some buttons and doesn't cycle through them normally.
For example, let's say I have eight buttons defined in a PSD.
1
2
3
4
5
6
7
8
When I preview or do a test burn, the highlight will stop on 1 and 2 but skip 3 and 5 and other random button definitions. And then when it gets to the last, it doesn't cycle back to the first.
I have everything set up correctly as far as I know - group layers prefaced with (+), highlight cursor prefaced with (=1), etc. And the order looks good in Encore.
Extremely frustrated, anyone else having this problem in CS5? I can up the PSD if anyone wants to check it out.
Thanks,
Tom

Can you post a screenshot of the menu with button routing on?
I second Stanley's request, and please Crop into that area, and also Save your JPEG, or PNG, with adequate resolution for people to see the numbers on your Button Routing. Also, if you have any specific desires for the order of your Button Routing, please define that.
Note that En will Automatically Route Buttons, based on their Layer Set Order in PS. If you have done some moving around of the order of Button Layer Sets, or have done some Copy/Duplicate, then what you think the order should be, but it might not be so. En will start at the bottom of the Layers Panel, and assign the identifier, Button 1 (regardless of what name you might have assigned), to the lowest Button, and working up, one Button Layer Set at a time, until it reaches the top. Can you also post a screen-cap of your Button Layer Sets (can be closed for a clear shot of the entire Palette), with the Layers Palette showing clearly, and the image with the Buttons showing near by? That could also be very helpful.
Good luck,
Hunt

LOV single selection list is not working in my JDeveloper 10.1.2.3

Hi!
I'm stumped with this. I'm also new to JDeveloper. I used the sample tutorial from the OTN website entitled "JSPDataBoundLists.jws" to learn how to create drop-down lists in JDeveloper.
My problem is I created a single selection list LOV from DepartmentListView Data Control and pasted it into an EmployeesView Input form. This is so I can just select the Department names to populate the DepartmentID field in Employees table. I setup the data binding in the UI Model of my jsp using the "List Binding Editor". I checked the UIModel file and it looks as follows:
<DCControl
id="DepartmentId2"
SubType="DCListSingleSel"
IterBinding="EmployeesViewIterator"
DTClass="oracle.adf.dt.objects.JUDTCtrlListLOV"
ApplyValidation="false"
isDynamic="false"
ListOperMode="0"
ListIter="DepartmentsListViewIterator" >
<AttrNames>
<Item Value="DepartmentId" />
</AttrNames>
<ListAttrNames>
<Item Value="DepartmentId" />
</ListAttrNames>
<ListDisplayAttrNames>
<Item Value="DepartmentName" />
</ListDisplayAttrNames>
</DCControl>
I run the jsp, selected a value from the drop-down list, do a submit and do a commit, but the DepartmentId from the DepartmentsListView was not stored in Employees. What is wierd here is that there is an exact same single selection list defined a row above mine which is working fine. How come that one is working and mine is not?

Eureka! I finally found the answer to my own question!
This simple problem of adding a drop-down list into a jsp page cost me 3 whole days (around 24 full working hours) to find the answer. Normally it only takes me a few minutes with the other web app languages I've learned. And I just stumbled into the answer just a few minutes ago (maybe all thanks should be given to God whom let me stumble into the answer since me and my wife have been praying for several weeks now ever since I started trying to learn Oracle JDeveloper. It is really very very difficult and time consuming to learn compared to other web app languages and tools).
Anyway, the reason why my LOV does not work in my jsps using JDeveloper 10.1.2.3 is because JDeveloper 10.1.2.3 seems to allow only one input-form-element for the same field of the input table!
For example, what happened to me was I had an input form created for the Employees table in the HR schema. I did this simply by drag-and-drop from the "Data Control Palette". This feature I like very much with JDeveloper. It is really easy and works instantly. And then, I drag-and-drop the departmentname field from the Departments table as a "single selection list" into the jsp and setup its bindings. So when I run the jsp, viola! The drop-down list does not populate the DepartmentId field of the Employees table. IT DOES NOT WORK! I've tried reinstalling both JDev and Oracle db and JDKs to no avail! I tried posting in this forum to no avail! I tried experimenting with newly created jsps to no avail! Then suddenly after repeatedly experimenting on this on different tutorials, guides and my own web app, it works! Why did it work? It was because I tried to add an LOV-single-selection-list on another sample tutorial with a READ-ONLY FORM on the jsp! Thus only the LOV is the input-form-element in the jsp for the table's field.
So why can't you find such a simple and basic fact anywhere in the web, the tutorials, guides or the forum? I do not know. Maybe only I am using such an old version of JDev? But what about the users who used it when it just got out a couple of years ago? Didn't they have the same problem? Anyway, it seems like the answer to a lot of my simple basic questions about JDeveloper is not documented, or is buried very deep beneath all the other words of all these documents. Hopefully JDeveloper's documentations would get a lot easier to use very very soon!

Join AirPort Express to D-Link DGL4300 router in client mode not working

I only want to be able to stream iTunes to my AirPort Express via my existing network which is controlled by my D-Link DGL-4300 router.
My AirPort Express works as an iTunes streamer because I tested it running its own network (ignoring the existing D-Link network). I am trying to connect in client mode (I think), but my D-Link router just can't see the AirPort Express which seems to disappear off the radar after it restarts with the new settings.
This is what happens...
1. AirPort Express Hard Reset
2. Connect to Airport Express wireless network (which disconnects me from my D-Link DGL4300 wireless network “K1000578”)
3. Run AirPort Utility and enter “Assist Me” mode.
4. Set AirPort Express name and password then click continue.
5. Select “I have a wireless network and want to add AirPort Express or replace an existing device on my network” then click continue.
6. Select “I want AirPort Express to join my current network”
7. Select the name of my D-Link DGL4300 network “K1000578” from the drop down box, select WPA/WPA2 Personal wireless security type and enter the DGL4300 password, then click continue.
8. Click Update in the summary screen.
What happens then is...
MESSAGE BOX “Apple wireless device restarting. Please wait...”
MESSAGE BOX “Connecting to network ‘K1000578’. Please wait...”
AirPort Utility returns with a message advising that although the device was successfully updated, AirPort utility was unable to find it after restarting. It also suggests that I made need to reselect my network for the AirPort menu and try again.
My computer is now unable to even see the AirPort express device.
When I try to reconnect to my existing DGL4300 network “K1000578”, it says that the settings saved on this computer for the network do not match the requirements of the network. !! ***!!
I can fix the last part above by deleting the connection information for my DGL4300 and searching for it again. BUT HOW ON EARTH DO I CONNECT MY AIRPORT EXPRESS TO MY NETWORK?!!
I am able to connect my PC directly to the AirPort Express (if I set it up as its own network) and successfully stream iTunes, but this means I have to disconnect from my DGL4300 network also which means I won’t get internet on that machine and I can’t use my iPhone Remote App.
This is my second experience with Apples “it just works” philosophy. MobileMe was my first. Guess how I’m feeling!
Any help at all is kindly appreciated.

I forgot to mention, I have turned off the MAC address filters on my router, so that's not the cause.

Sh command on router to list errors not working?

Similar Messages

Maybe you are looking for