Shane - Your Stock Answer No.29 ?
I was looking at your FAQ on CreativeCOW and came across this:-
Shane's Stock Answer #29: Error: “Need AGP Graphics card”
The Final Cut software is looking for a graphics card type that is required for that version of the software. FCP 4 and FCP 4.5 were released when AGP cards were the requirement. Attempting to open this on a Mac with a PCIe graphics card, such as an Intel Mac, will cause this error. FCP 4.5 is not supported on the Intel Macs.
If you have an Intel Mac, you are going to have to upgrade to a supported version of FCP…and FCP 6, part of Final Cut Studio 2, is the latest version.
It implies that the only course of action is to upgrade. However, the simple expedient of pressing the "esc" key enables FCP to open. A permanent solution is to edit the .plist which only takes a minute.
I realise that the ideal course is to upgrade, but the non-supported versions of FCP/FCE can be used reasonably well using the above modifications.
I was just wondering why you haven't included this information ?
Ian.
Ian...sorry that this thread has gotten out of hand. First off, let me note that I did not know that holding down the ESC key allowed older versions of FCP to work on newer machines. I don't recall reading that anywhere, and since I don't try to run FCP 4.5 on an intel mac myself (I do not own and intel mac), I have no personal experience with this. I did know of a hack, one where you had to hack the code of FCP so that you got rid of the AGP in the code and replaced it with something else. And that used to be part of the Stock Answer. But I took it out as I did not want to tell people to hack their FCP code, have something go wrong and have them then blame me.
But David is right. If you plan on upgrading you need to weigh ALL the options that come with it. This includes not only getting the machine, but getting compatible versions of software, and other third party products that you may need. If you want to get an Intel Mac, yet still want to use FCP, and you know that FCP 4.5 isn't compatible with the Intels, then you know that you much upgrade FCP as well. I want to get a new Intel myself. But, in doing so I need to get the Mac, RAM, and a new capture card (my old one is for PCI-X only). So the cost of the machine isn't the only factor. Since I could not afford to upgrade to an Intel for this past year, I haven't. I am still running a pretty old G5. But, it still works and works well, so I haven't had the need, nor the opportunity.
But, if that simple ESC key trick works, then I will include it in my stock answer. I didn't omit that on purpose, I simply had no idea it was an option.
Shane
Similar Messages
-
Shane's stock answers no help on my dropped frames trouble -- desperate!
Hi all you chicklets,
I've been trying to take a series of short videos (totalling 15 mins) that I made using FCP 4.5 for the web and nudging them so that they can go on DVDs for a special non-profit event where people might want to have a copy of the videos to watch on their tvs. I am using DVDSP for this per comments by the apple peeps for a previous question I posted.
Having trouble with dropped audio that is making me nuts. S-O-S!
Here are as many gritty details as I can bear to write down.
Equipment:
A) G4 867 MHz PowerPC, 1.5 GB RAM, 10.3.9 OS
B) I work by using G-Tech Firewire (400) hard drive (500GB) as my system disk.
C) I also have some junk on another Firewire HD (Iomega - 160GB) that I think is used by the G-Tech. Please don't scream! I intend to learn all about media manager to clean up my crap after this event has passed on by.
I'm new to this -- and if elected president, I promise to have a better workflow station system management process ad lib ad nauseum next time, and will not clog up the apple intertubes with my pleas for help on obvious beginner's mistakes.
Actions:
1) I put the videos all into the same sequence. Previously each 'chapter' had its own tab and sequence. Please note that I have burned dvds of these using idvd with no audio drops, no nuthin.
2) I added chapter and compression markers (sparingly) since I do have some effects/transitions that I would like to have come out smooth.
3) I was able to hear and see everything perfectly while playing the timeline with the videos all on the same one. Nothing dropped.
4) My settings in FCP timeline are thus:
a) Safe RT
b) Playback Video Quality: High
c) PLay base layer only (check)
d) Record to tape: Full quality
5) I exported this movie like this:
Export > Quicktime Movie
--current settings
--audio + video
--all markers
--make movie self-contained
6) And then I dropped this movie into Compressor
I used these presets:
MPEG 2 60 Min High Quality Encode
my audio = DVD PCM Audio = 48KHz 16 bit stereo
(don't have dolby as an option here I think)
After compression the video part looks as good as it's ever going to look (I think it's pretty good) but the audio has breaks and even omissions of music in the Background that I can hear perfectly when listening to the thing in FCP.
I went to Shane's stock answers. I even trashed the FCP preferences -- and I don't even know what that means.
I need to get this thing done soon -- can someone, anyone, please please give me a hand? What am I missing other than sleep?
Thanks so much for my long and winding road!
HeirBettyHeirBetty wrote:
3) I was able to hear and see everything perfectly while playing the timeline with the videos all on the same one. Nothing dropped.
I'm a bit unclear as I didn't see the other thread. To clarify: you want to make separate sequences and output them as separate movie files instead of having them all on the same timeline? And if you do that, you get dropped frames?
You have a very slow machine and running your OS on an external disk and then editing off the same disk is making it even slower. The more sequences, bins, clips, etc, in a project, the more system resources it will take and system resources are a rare commodity on your machine, I am afraid.
So keep things as lean as you can. Consider creating separate projects for, say, every 3 movies or put everything into one timeline and then use the In and Out points to select which parts you want to export each time. -
Here is the thread for Shan'es Stock Answers...and any that others feel to contribute. This way, when a question that we have seen over and over and over again appears, we don't need to type in the answer AGAIN! Or refer tot he thread that it appeared in. I have Stickies with each answer, and copy and paste them. What a time saver. And if more detail is needed, then the thread continues...
So here is "I can't get my transitions to work" or "insufficeint content" when I try to add a transition:
Shane's Stock Answer #1:
You need to make sure that your clips have enough media (called 'handles') at the beginning of the incoming clip and at the end of the outgoing clip for the transition. For example, if you have a 1 second (30 frame) dissolve, your in and out point need to be at least 15 frames from the edge of the clip.#9 Non-DV material.
Shane's Stock Answer #9:
How to capture material that is not DV.
FCP's basic design is to capture and work with DV material - either miniDV or DVCAM. To do this, all you need is a DV camera or deck that have a firewire connection, a firewire cable, and your computer (and external firewire drive, 7200 RPM, 8Mbs min.)
There are more advanced ways to capture non-DV material such as betaSP, digibeta, and HD. But all these methods require special capture cards.
Let's say you have other formats that you want to capture into FCP and work with...but you need it done cheaply. VHS, S-VHS, Hi8, and DVDs (ones recorded on DVD cameras, NOT Hollywood movies or copywritten material). To do this you need to do one of the following:
1) Buy a digital-to-analogue converter. The Canopus ADVC-100 ($270) is the best of the cheaper models. Other people have had success with the Formac. The Dazzle DV bridge is spotty at best.
2) Buy a cheap miniDV camera. They can be had for around $350. Make sure that the model you buy allows footage to be fed to it via the RCA cables and that it can record this footage. What you'll do is transfer your footage from your VHS (or what have you) to miniDV...then capture the footage from miniDV. -
I'm trying to download what's app chatting application and the massage given (need your secret answers for the below questions to proceed your purchase request ) but the problem is I forgot my answers :((( how can I reset the questions and the answer ????
Visit this site: http://support.apple.com/kb/HT5312
-
Shane...need your expertise Re: stock answer# 42
Shane, Having a problem with one of my clients airing ( cable ) a DVD I deliver. Even though I give them a letterboxed DVD, it plays back from their machine vertically stretched. I am at wits end. Please allow me to give you some info. I edit in Prores footage shot in XDCAM HD. I kept the encoding process
simple this week and did not use Compressor just DVD SP. I checked the 16x9 letterbox in the General tab per your instructions and burned. Last evening I walked into a local sports bar to see if the program was on the air and how it looked. It seemed fine but it was playing on a wide screen TV so I have no idea how they had it configured. When I arrive home I turned on a 4x3 TV and it was vertically stretched! If I play it back in my studio from a stand alone DVD player into a 4x3 SD TV it looks fine. Could there be a setting in that DVD player at the cable company that I can tell them about or could I be doing something wrong here? I am really lost here. Shane, if you or anyone else has some insight it will be greatly appreciated.
Best,
TomShane Ross wrote:
I think Studio nailed it. The TV settings. If it is stretched, then their TV is set to stretch the image. My HDTV has 4 settings...or 5. Zoom, Just, then some form of stretch, then the 4:3 square box. I leave it on JUST for regular TV signals, but 16:9 DVDs I adjust to...one of the other settings.
Have them run thru their TV aspect ratio settings until they get it.
But in order for the tv in the bar to have displayed it correctly it must have been an anamorphic dvd, not letterboxed as the OP stated. As David K and I have pointed out this is never going to give consistent results on both types of monitors when played from a single dvd player. The dvd player (in this case the cable company's) has to be set for connection to one type of screen or the other.
In this case the choices for delivery are all going to be a compromise, either; broadcasting full quality anamorphic which will mean that those with 4:3 tvs see the incorrect aspect ratio or sacrificing quality by supplying/broadcasting and already letterboxed image for an increased likelihood of everybody seeing the right aspect ratio, although at a risk of those with 16:9 monitors seeing an unnecessarily letterboxed image (which is what I believe would happen to you shane if you keep your tv on 'Just' for tv broadcasts. It would try to make the 4:3 frame, black bars included, fill the 16:9 screen, albeit with a bit of algorithmic distortion and cropping, not a straight anamorphic squeeze. As I said before, 'zoom' would be the right option in this case.)
In my experience the settings available are;
4:3 - shows a 4:3 screen with black pillarboxing. The correct setting for 4:3 shows.
14:9 - shows a 14:9 screen with black pillarboxing. For 4:3 shows, will fill a bit more of the screen horizontally but at the expense of some cropping top and bottom.
wide/16:9 - stretches a 4:3 frame to fill the full 16:9 screen. The correct setting for anamorphic material ie SD dvds.
zoom - scales a 4:3 frame to fill the full width of the screen while maintaining aspect ratio. The correct setting for letterboxed material although some tvs have 2 levels of zoom, one which correctly scales a 16:9 letterbox to the screen and one a bit tighter.
Justify/Smart - Uses an algorithm to scale and distort the image so that a 4:3 frame fills the 16:9 screen by a combination of cropping a little height and stretching the image horizontally, but more so at the edges and less so in the centre. Gives a strange effect to horizontally scrolling titles.
Message was edited by: J S Langham -
HT1911 How do you change the email address associated with forgetting your security answers
Trying purcahse a song on iTunes and have been prompted to answer security questions. Since I do not remember setting up these security questions, I do not remember the answers.
I can click a link that will send instructions to resetting the security questions, but the email address associated with this link is no longer active. How do I change this email address?Just where are you going?
and what do you see? A screen shot with personal info redacted would be great.
I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information. -
What is the difference in a app marked free, and one that is an in-app??.. This is not explained by supports answer. I do not download a free app with
The knowledge I am required to pay for it. Down here in Texas, free means free. Some one out there explain in plain English why I have been charged $40.00
In last six months for FREE apps.??A free app is free to download from the store. Some apps (both free and paid-for) then allow you to make in-app purchases within them e.g. to unlock extra features (items or levels in a game, extra features in other apps etc), to remove adverts (some free apps get money via adverts that are diaplayed in them, but you can sometimes pay to remove them).
If you don't want to be able to make in-app purchases then you can turn them off on your iPad via Settings > General > Restrictions > In-App Purchases 'off'.
As most of the people on these forums, including myself, are fellow users, not iTunes Support, we won't know why you have been charged $40 in the last six months. Have you looked at the purchase history on your account (Store > View Account menu option on your computer's iTunes), or contacted iTunes Support ? -
Organize bookmarks no longer exists on Firefox 4. I have been to your support page "Exporting bookmarks to an HTML file" and this level of Firefox is in 3 and below. Can you help me be able to transport my bookmarks from Firefox to Firefox on different machines.
Go to Bookmarks menu--> Show All Bookmarks ( Ctrl + Shift + B ) --> Import and Backup --> Export HTML
-
*** How to get Album Artwork to display on your iPod: ANSWERED!
I'll start by saying that my iPod Nano would not display ANY album art at all, even though it did in iTunes. I just added 180 albums to my iPod, and they all showed up, perfectly. Here's how I did it:
1) Move all the songs you want on your iPod into the iTunes music library. (Open iTunes, and drag the files over the "LIBRARY" catagory)
2) Click Music, under the LIBRARY heading.
3) Add the artwork to each song/album. I used "iTunes Art Importer". It's a great program, and is really easy to use/download.
4) Connect your iPod to your computer.
5) Remove any songs you have on the iPod.
6) Go to the Music tab, in the iPod control panel.
7) Sync all music files/playlists from your iTunes library.
If you did this correctly, all the album art you added in your iTunes library should display on your iPod. Be sure to have "Display Album Art on this iPod" checked off.I was searching for exactly the same issue in the forum.
I've tried mutiple ways of copying the artwork into the iPod, all to no avail.
Just like yours, the artwork shows up in iTunes, but not on the iPod screen,and only for a few select albums, mainly stuff I've put in recently (although some new artwork does show).
I checked to see if there was an issue with the artwork format, but they're all .jpg images, so there shouldn't be any issues there.
Let's hope someone else might have a solution for us.
Windows XP 60G 5G & 30G 5G U2 iPods -
HT204088 how do u find out your security answer because i forgot it?
i cant buy any games apps or movies because its a new ipod touch and i have to put in a secuity answer and i dont know it
Click here and search the article for '2 out of 3' without the quotes; this generally involves either a message being sent to your rescue email address or contacting the iTunes Store staff directly.
(74405) -
HOWTO: get your questions answered on this forum
As this is primarily about formatting, I hope I've got everything right :)
Giving your posting a clear layout is helpful to the other participants in this forum, because it makes your contribution easier to read. Here are some tips for increasing the clarity of your question or reply.
[list=1]
[*]1. PLEASE DO NOT USE ALL CAPITALS. It makes your posting harder to read. Mixed case (at least in English) has the greatest variety of letter shapes and therefore conveys the most information to a reader's eyes. Also, netiquette considers all capitals to be the equivalent of SHOUTING and is thus rude.
[*]2. Pls dont us txt abbrvtns n ur pstng. This also makes things difficult to read. Nobody will think you are less of a "d00d" if you use you instead of u.
[*]3. Please make use of the UBB formatting options. These are like HTML mark-up, but they use square brackets - []- instead of pointy ones - <>. More information can be found at the Forum FAQ http://forums.oracle.com/forums/faq.jsp?uid=1027669490365 (unfortunately, the URL for the actual formatting page is not visible to us, so I can't post it here).
[*]4. Please include all necessary information. This usually means, at minimum, the database version you are using. If you are asking about a piece of your own code that does not work, post the error code and/or message, or at least describe its behaviour. Saying "it doesn't work" doesn't give us much to go on. Posting the code is a good idea, unless it's humongous: use the UBB [ code ][ /code ] format.
[*]5. Please read the documentation before posting. Some people are offended by replies that say RTFM or STFW. You won't invite such replies if you have made reasonable efforts to find out the answer yourself before posting here. This means at least reading the Oracle manual. You should also try using the Forum search engine, although we know it is somewhat unreliable: OTN have promised to make it better soon. There is a lot of information on the web so learning to use a search engine like Google (http://www.google.com) will help you as well.
[*]6. Start a new thread for a fresh topic. Appending a new subject to an existing thread is not a good idea. If it's a long running thread only a handful of people might visit it - as everyone else has got bored - which decreases your chances of getting a reply. Also, it antagonises the people who are following that thread.
[list]
There's further discussion of formatting postings here: The specified item was not found..
In summary, if you cannot be bothered to spend the time making you post easy and interesting to read why should other people spend their time answering it? There are no Oracle moderators on this forum, we are all volunteers.
Cheers, APC
Caveat emptor
This advice is posted on behalf of the Rogue Moderators. It is posted with the best of intentions but is not guaranteed in any way, shape or form7. Don't post the same question several times.If someone can answer your question, he/she will do, asking twice or more often
doesn't give better answers.
8. Do not use terms like "URGENT" or "pl.answer asap".
Noone will answer faster, but many will be bored.
9. Do not login with a name like NULL NULL.
People answering your question would like to talk to a person,
not to a brain damage. -
i cant remember the answers to the security questions how do i reset the answer
The Three Best Alternatives for Security Questions and Rescue Mail
If you do not have success with one, then try another:
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
Pls Give me your Valuble Answer - 2
HI Guru's
1) What is the difference between alternative calculation type and alternative condition base value?
2) Is it possible to have different pricing procedure for sales order and invoice?
3) Consumption based planning?
4) Difference between billing and invoice?
5) How to stop PGI?
6) What do you mean by user specific parameters?
7) Explain about common distribution channels and common divisions and combined distribution channel and combined divisions, what is use?
8) How to extend material and customer to other sales areas?
9) Why does account group controls customer?
10) How can you use R/3 project management in implementation?
11) What are the Enhancements you done as a support team member and explain any two?
12) To get pricing in billing what are configuration you done in your project?
13) To extend material one plant to another plant what are the configuration you done in your project?
14) What do you mean by POD(proof of delivery) what is the use of pod? What are the con figuration you done in your project?
15) What is the significance of products under system application and products?
waiting for your warm reply
thanking you
[email protected]Hi,
1) What is the difference between alternative calculation type and alternative condition base value?
Ans. AltCty - Condition formula for alternative calculation type: It is again a Routine that is written by ABAP Consultant.
It is an alternative formula for the condition type that can be used instead of standard formulas.
For example, let us take the Profit Margin which can be both + / - , so here this routine will help us in generating the value which can be either + or -. Profit margin is not a condition type so it cannot be classified as +ve or -ve in the V/06.
Ex.: 950 0 Profit Margin 11.
So we assign 11 - Profit Margin.
If new routines are to be defined we follow the procedure given below.
o Go to T.Code: VOFM. - Maintain Requirements & Formulas
o Click on the "Formulas" and then on the "Condition Values".
o We have a list of routines, we can ask ABAP consultant to create new routines based on the client requests.
o And we assign the application type.
AltCBV - Alternative formula for condition base value:
The alternate base value is used as the calculation basis only, while the alternate calculation is used to modify the final value.
For example, imagine you have a condition type ZZ01, with a condition record maintained (master data) for $100. Now, condition ZZ02 also exists lower in the schema, but with a rate of 10%. The standard calculation would result in a final value of $110.
The alternate base value could say, "don't use $100 as the basis -- use the original price PR00 only, which was $90." Then, the final value would be $100 + (10% of $90) = $109.
The alternate calculation routine says, "ignore the 10% altogether. Instead, use an externally calculated 20%." Then, you end up with a final value of $100 + (20% of $100) = $120.
Put them both together, and you could end up with $100 + (20% of $90) = $118.
Formula for determining the condition basis as an alternative to the standard.
It is again a Routine that is written by ABAP Consultant.
It is used as a basis to calculate value of the condition type instead of using it from the "FROM" column.
Ex.: Freight - KF00.
Freight is calculated based on weight, volume etc. and not on the base price. In pricing there is no entry of weight from which the value can be referred like we do for discounts using base price. We have to get the value from the Material master.
In this column we can mention the value as 12 - Gross Weight or 13 - Net Weight.
During pricing, the system will consider the value that is mentioned in this column and determine the freight based on this value.
Suppose we have Net weight: 100 kgs and Gross Weight: 150 kgs. And if we mention 13 in this column then the Freight condition KF00 will be calculated using the weight as 100 kgs
2) Is it possible to have different pricing procedure for sales order and invoice?
3) Consumption based planning?
Ans. Consumption based planning is typically used for MRO (Maintenance Repair and Operations) items.
For raw materials and semi-finished goods, the planning is driven primarily by the sales forecast.
The lot size usually depends on the material characteristics.
For e.g. if material is relatively inexpensive and small, then usually a fixed lot size (equal to few months supply) is used. If it is expensive or bulky, exact lot size is usually used.
4) Difference between billing and invoice?
Ans. billing document is a general term that includes your sales invoice, debit memo, credit memo and cancellation documents.
in layman's term, invoice usually refers to the sales invoice, or what you send to your customer as your company's bill or charges.
5) How to stop PGI?
6) What do you mean by user specific parameters?
7) Explain about common distribution channels and common divisions and combined distribution channel and combined divisions, what is use?
8) How to extend material and customer to other sales areas?
Ans. you can extend the material to required Sales org and distr. channel though the material is already defined for different sales org.
The way to do is go to Transaction code "MM01" and enter the material number for which you want to extend and click enter .
If you see any message just ignore and click enter again.
You will get a View screen. Choose the "Sales views" ( there will be three views related to sales) and click enter.
Now you will see a screen showing the Plant, Sales org, and Distribution channel. The values showed will the existing ones. You can enter your required Sales org and Distribution channel here and click until you save.
The material now will be extended to the New Sales org and Distribution channel and also for the old ones.
9) Why does account group controls customer?
Ans. When you create a master record for a business partner, you must enter an account group. The account group determines:
Which screens and fields are necessary for entering master data
Whether you can or must make an entry in these fields
How master record numbers are assigned (externally by you or internally by the system) and the number range from which they are assigned
Which partner functions are valid
Whether the business partner is a one-time customer or one-time vendor
10) How can you use R/3 project management in implementation?
11) What are the Enhancements you done as a support team member and explain any two?
12) To get pricing in billing what are configuration you done in your project?
13) To extend material one plant to another plant what are the configuration you done in your project?
14) What do you mean by POD(proof of delivery) what is the use of pod? What are the con figuration you done in your project?
Ans. POD proff of Delivery, is nothing but a Acknowledgement that the business has to receive from Ship-to-party by which the sp specifies confirms that he/she received the shipment so that the business can raise the bill,
from configuration point of view
in the customer master Flag POD indicator so that the user can raise the invoice unless and until he/she raises billing document, if it confirmed pl use t.code: VLPODQ to relese the document
15) What is the significance of products under system application and products?
Reward points pls.
Regards,
Govind. -
I have lost the password to my icloud account. I cannot remember my security questions and the alternative rescue email address I gave is no longer in operation - the ISP went bust. What can I do?
Apple ID Security -
Telephone Apple Care for your country and ask for the Account Security Team, then request help resetting the questions, etc.
Or use this link for contact by internet-
http://www.apple.com/support/appleid/contact/
Choose Other Apple ID Topics and then Apple ID Account Security -
What if you forgot one of your security answer?
I forgot what one of my apple security answer, is there anyway to get it back?
Reset Security Questions
Frequently asked questions about Apple ID
Manage My Apple ID
Or you can email iTunes Support at iTunes Store Support.
If all else fails:
1. Go to: Apple Express Lane;
2. Under Product Categories choose iTunes;
3. Then choose iTunes Store;
4. Then choose Account Management;
5. Now choose iTunes Store Security and answer the bullet questions, then click
Continue;
6. Sign in with your Apple ID and press Continue;
7. Under Contact Options fill out the information and advise iTunes that you would
like your security/challenge questions reset;
8. Click Send/Continue.
You should get a response within 24 hours by email.
In the event you are unsuccessful then contact AppleCare - Contacting Apple for support and service.
Another user had success doing the following:
I got some help from an apple assistant on the phone. It is kind of round about way to get in.
Here is what he said to do and it is working for me...
a. on the device that is asking you for the security questions go to "settings", > "store" >
tap the Apple ID and choose view"Apple ID" and sign in.
b. Tap on payment information and add a credit/debit card of your preference then select
"done", in the upper right corner
c. sign out and back into iTunes on the device by going to "settings"> "store" > tap the
Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you
should be asked to verify your security code for the credit /debit card and NOT the
security questions.
d. At this time you can remove the card by going back in to edit the payment info and
selecting "none" as the card type then saving the changes by selecting "done". You
should now be able to use your iTunes store credit without answering the security
questions.
It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
Good Luck friends!
Maybe you are looking for
-
I have an itunes account and an ipod, and when I purchased 2 albums on the computer they synced straight to the ipod. I bought an iphone and used the usb cord from the computer to it to sync the itunes albums to the new phone. Everything transfered
-
Is there anyone with a 1st generation IPad and IOS 5.1 that's NOT having tons of problems?
The whole world is always in such a big hurry to buy the next generation of anything - seems this has caused Apple to just not bother with their early customers. So many updates to so many apps to work with all the new stuff - not much works at all f
-
Wrting data to a file in specific positions
Hi, i have written a program that reads from one text file, grabs certain data and I will write that data out to a new fie. I am successfully doing the write, but how do I tell it to write the different data in specific positions in that new file. Ri
-
Dear experts, we have scenarios with different priority on our SAP PI 7.0 system. 1. Async: File to IDoc (low priority) 2. Async: IDoc to File (high priority) The scenarios are configured in SXMB_ADM ("Configure Filter for Queue Prioritizazion") and
-
Acrobat XI crash with Referenced pages
unfortunately the latest version of Acrobat XI (and also previous Acrobat X version) could crash when opening a PDF file which have reference pages. For example a PDF/X-5g complaint PDF. The following conditions must be true: Acrobat and Adobe Reader