Share 2nd REQUEST

Hi, I have a problem with the share button in all the programs (Finder, Safari, etc.) when I touch it say NO SERVICE instead Airdrop, etc. Please help me to configure. Thanks in advanced!!

I've briefly tried out the ICS source code, and this is what I've had time to discover:
X-Loader: this seems to be fine.
U-Boot: this seems to be fine.
Kernel: This builds, but several things do not work with it: camera, video playback, GPS - maybe other things as well but I've not had time to check.
Wifi driver: This looks like the wifi driver from the Gingerbread source release, instead of the ICS one - I haven't had time to verify this though.
It seems like the kernel might have been from an early version of the build. I've been trying to run it with the latest 0116 OTA, and I've been building it using the provided omap3621_cl1_defconfig.

Similar Messages

How to avoid "share screen request" in "back to my mac"

I tried to use back to my mac screen sharing and it waits for a response to a "share screen request" on the target mac. Is there a way to avoid this? I can't see the value of trying to remotely operate the target mac if someone needs to be there to respond to the "share screen request".

I see that. The problem is that the log in choice only lets me share the screen of my admin account. I want to share the screen of a standard account which is where I do all my work. So I connect to the standard account and then when I go to share the screen I get the "share screen request"
I just tried to log out of the admin account and into the standard remotely and that worked. Strange way to do it but as long as it works I'm fine with it.
Thanks for the response, it did solve my question because it helped me figure out how to do it.

Every 2nd request from WTC fails

Hi there,
We are using WLS 10.0.1 integrated with Tuxedo 6.5 and have this strange situation where every second request sent from WLS to Tuxedo fails with "TPESYSTEM(12):0:0:TPED_MINVAL(0):QMNONE(0):0". There is no other associated message.
Our call sequence consists of:
ApplicationToMonitorInterface connection = tuxedoConnectionFactory.getTuxedoConnection();
Reply reply = connection.tpcall(requestMapper.getServiceName(), requestMapper.getTypedFmlBuffer(),
ApplicationToMonitorInterface.TPNOAUTH | ApplicationToMonitorInterface.TPNOTIME);
process reply
connection.tpterm();
The tpcall is throwing a TPException on every second invocation. The amount of time (seconds or minutes) that passes between invocations seems to be irrelevent. I've tried various combinations of flags passed to the tpcall, including zero, with no apparent difference.
I turned up WTC logging to try and troubleshoot the issue. Log fragments are pasted below.
Note that the same reader thread "ExecuteThread: '4'" appears to be used for both calls, suggesting that they are both making use of the same TCP connection.
A tcpdump of both calls reveals (apparently complete) outgoing request and incoming reply data in both cases. However, it looks as though WTC gets its input stream out of sync and (possibly) reads left over data from the 1st call. WTC ditches the connection when the 2nd call fails, so the 3rd call starts off with a brand new connection again.
Any ideas?
Please excuse the bulk, but here is the trace from the successful call:
ExecuteThread: '1'<BEA-180046> <[/TuxedoConnection/TuxedoConnection/>
ExecuteThread: '1'<BEA-180046> <no transaction>
ExecuteThread: '1'<BEA-180046> <]/TuxedoConnection/TuxedoConnection/30>
ExecuteThread: '1'<BEA-180046> <[/TuxedoConnection/tpcall/GSM_GetAcct/32>
ExecuteThread: '1'<BEA-180046> <[/TuxedoConnection/getProviderRoute/GSM_GetAcct>
ExecuteThread: '1'<BEA-180046> <[/WTCRouteManager/selectTargetRotes/GSM_GetAcct>
ExecuteThread: '1'<BEA-180046> <[/WTCService/getImport/(svc = GSM_GetAcct, xid = null)>
ExecuteThread: '1'<BEA-180046> <[/TDMImport/getStatus/>
ExecuteThread: '1'<BEA-180046> <[/TDMRemoteTDomain/getTsession/MTS-Remote, create = false>
ExecuteThread: '1'<BEA-180046> <]/TDMRemoteTDomain/getTsession/20/null>
ExecuteThread: '1'<BEA-180046> </TDMRemoteTDomain/getTsession/100/null>
ExecuteThread: '1'<BEA-180046> <]/TDMImport/getStatus/30/AVAILABLE>
ExecuteThread: '1'<BEA-180046> <]/WTCService/getImport/40/(0)>
ExecuteThread: '1'<BEA-180046> <[/TDMRemoteTDomain/getTsession/MTS-Remote, create = true>
ExecuteThread: '1'<BEA-180046> <[/WLSInvoke/weblogic.wtc.gwt.TDMLocalTDomain@264a55ca/weblogic.wtc.gwt.TDMRemoteTDomain@acb54dc7>
ExecuteThread: '1'<BEA-180046> <]/WLSInvoke/10>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/set_compression_threshold/2147483647>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/set_compression_threshold/20/>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/set_sess_sec/NONE>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/set_sess_sec/30/>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/setDesiredName/WTC_OBF>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/setDesiredName/10/>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/set_dom_target_name/OBF_WTC>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/set_dom_target_name/10/>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/set_local_domain_name/MTS-Local>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/set_local_domain_name/10>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/setRemoteDomainId/OBF_WTC>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/setRemoteDomainId/10>
ExecuteThread: '1'<BEA-180046> <[/TDMRemoteTDomain/getKeepAlive>
ExecuteThread: '1'<BEA-180046> <]/TDMRemoteTDomain/getKeepAlive/10>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/setKeepAlive/0>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/setKeepAlive/10/>
ExecuteThread: '1'<BEA-180046> <[/TDMRemoteTDomain/getKeepAliveWait>
ExecuteThread: '1'<BEA-180046> <]/TDMRemoteTDomain/getKeepAliveWait/10>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/setKeepAliveWait/0>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/setKeepAliveWait/10/>
ExecuteThread: '1'<BEA-180046> <[/dsession/setAppKey/TpUsrFile>
ExecuteThread: '1'<BEA-180046> <]/dsession/setAppKey/10/>
ExecuteThread: '1'<BEA-180046> <[/dsession/setAllowAnonymous/false>
ExecuteThread: '1'<BEA-180046> <]/dsession/setAllowAnonymous/10/>
ExecuteThread: '1'<BEA-180046> <[/dsession/setDfltAppKey/-1>
ExecuteThread: '1'<BEA-180046> <]/dsession/setDfltAppKey/10/>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/setEncryptionFlags/39>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/setEncryptionFlags/10>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/tpinit/weblogic.wtc.jatmi.TPINIT@355e82>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/do_connect/WTC_OBF>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/alloc_TDOM/14/null>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/alloc_TDOM/10/TDOM:GWNW_XATMI_PRE_NW_ACALL1:1:-1:0:0:0:0:0:0:0:50:null>
ExecuteThread: '1'<BEA-180046> <[/write_dom_65_tfmh/WTC_OBF/10/134217727>
ExecuteThread: '1'<BEA-180046> </write_dom_65_tfmh/header calculated_size=524>
ExecuteThread: '1'<BEA-180046> </write_dom_65_tfmh/opcode calculated_size=540>
ExecuteThread: '1'<BEA-180046> </write_dom_65_tfmh/total calculated_size=540>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/writeTuxedoMessage/>
ExecuteThread: '1'<BEA-180046> </TpeOut/writeTuxedoMessage/myNeedToWrite=32/myMark=32/myProtocol=10/parsedMetahdr=false>
ExecuteThread: '1'<BEA-180046> <]/TpeOut/writeTuxedoMessage/70/>
ExecuteThread: '1'<BEA-180046> </tfmh/write_dom_65_tfmh/TdomTcb=TDOM:GWNW_XATMI_PRE_NW_ACALL1:1:-1:0:0:0:0:0:0:0:50:null>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/writeTuxedoMessage/>
ExecuteThread: '1'<BEA-180046> </TpeOut/writeTuxedoMessage/myNeedToWrite=540/myMark=540/myProtocol=10/parsedMetahdr=true>
ExecuteThread: '1'<BEA-180046> <*]/TpeOut/writeTuxedoMessage/40/>
ExecuteThread: '1'<BEA-180046> <]/write_dom_65_tfmh/110/0/>
ExecuteThread: '1'<BEA-180046> <[/read_dom_65_tfmh/10>
ExecuteThread: '1'<BEA-180046> <[/TpeIn/readTuxedoMessage/true>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/myNeedToRead=32/myOffset=0/myMark=0/myProtocol=10/parsedMetahdr=false>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/toRead=32>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/myNeedToRead=0/myOffset=32/myMark=0>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/size=544>
ExecuteThread: '1'<BEA-180046> <[/TpeIn/readTuxedoMessage/false>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/myNeedToRead=512/myOffset=32/myMark=0/myProtocol=10/parsedMetahdr=true>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/toRead=512>
ExecuteThread: '1'<BEA-180046> </TpeIn/readTuxedoMessage/myNeedToRead=0/myOffset=544/myMark=0>
ExecuteThread: '1'<BEA-180046> <]/TpeIn/readTuxedoMessage/120/true>
ExecuteThread: '1'<BEA-180046> <]/TpeIn/readTuxedoMessage/150/true>
ExecuteThread: '1'<BEA-180046> </tfmh/read_dom_65_tfmh/opcode=GWNW_XATMI_PRE_NW_ACALL1_RPLY>
ExecuteThread: '1'<BEA-180046> <[/TpeIn/available/>
ExecuteThread: '1'<BEA-180046> <]/TpeIn/available/20/512>
ExecuteThread: '1'<BEA-180046> </read_dom_65_tfmh/bufsize=544 available=512>
ExecuteThread: '1'<BEA-180046> <[/TdomTcb/set_security_type 0>
ExecuteThread: '1'<BEA-180046> <]/TdomTcb/set_security_type>
ExecuteThread: '1'<BEA-180046> <[/TdomTcb/set_tm_release 64>
ExecuteThread: '1'<BEA-180046> <]/TdomTcb/set_tm_release>
ExecuteThread: '1'<BEA-180046> <[/TdomTcb/set_dom_protocol 13>
ExecuteThread: '1'<BEA-180046> <]/TdomTcb/set_dom_protocol>
ExecuteThread: '1'<BEA-180046> <]/read_dom_65_tfmh/70/0/0>
ExecuteThread: '1'<BEA-180046> <Remote gateway support features = 0>
ExecuteThread: '1'<BEA-180046> < /dsession(1)/do_connect/dom_protocol 13>
ExecuteThread: '1'<BEA-180046> </dsession(1)/do_connect/no LLE protocol>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/setUpTuxedoAAA/>
ExecuteThread: '1'<BEA-180046> <]/dsession/setUpTuxedoAAA/10/return 0>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/dmqDecision/>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/dmqDecision/10>
xecuteThread: '1' BEA-180087> <Established a connection to a remote domain OBF_WTC.>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/do_connect/170/>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/tpinit/30/>
ExecuteThread: '1'<BEA-180046> <]/TDMRemoteTDomain/getTsession/90/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '1'<BEA-180046> </TDMRemoteTDomain/getTsession/100/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '1'<BEA-180046> <]/WTCRouteManager/selectTargetRotes/30/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '1'<BEA-180046> <]/TuxedoConnection/getProviderRoute/20>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/tpcall/GSM_GetAcct/weblogic.wtc.jatmi.TypedFML32@247c48/32/null>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/tpacall/GSM_GetAcct/weblogic.wtc.jatmi.TypedFML32@247c48/32/null/0>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/_tpacall_internal/GSM_GetAcct/weblogic.wtc.jatmi.tfmh@5b63c2/32/null/0>
ExecuteThread: '1'<BEA-180046> <myAppKey = null>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/alloc_TDOM/1/GSM_GetAcct>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/alloc_TDOM/10/TDOM:GWNW_XATMI_CALL:2:-1:0:0:32:0:0:0:0:50:GSM_GetAcct>
ExecuteThread: '1'<BEA-180046> <[/rdsession(1)/add_rplyObj/SessionAcallDescriptor:2:false/weblogic.wtc.jatmi.TuxRply@f29035/-1>
ExecuteThread: '1'<BEA-180046> <]/rdsession(1)/add_rplyObj/40/>
ExecuteThread: '1'<BEA-180046> <[/write_dom_65_tfmh/WTC_OBF/13/2147483647>
ExecuteThread: '1'<BEA-180046> </write_dom_65_tfmh/header calculated_size=76>
ExecuteThread: '1'<BEA-180046> </write_dom_65_tfmh/opcode calculated_size=96>
ExecuteThread: '1'<BEA-180046> <[/FML32/_tmpresend/java.io.DataOutputStream@d9af8d>
ExecuteThread: '1'<BEA-180046> <numPointerFields=0 numView32Fields=0 numFml32Fields=0>
ExecuteThread: '1'<BEA-180046> <]/TypedFML32/_tmpresend/60/>
ExecuteThread: '1'<BEA-180046> <Outbound UDATA: buffer type(FML32, null)>
ExecuteThread: '1'<BEA-180072> <+++++ 65 User Data(184) +++++>
ExecuteThread: '1'<BEA-180113> <FF FF D8 F0 00 00 00 B8 7F FF FF FF 00 00 00 08 00 00 00 00 .......?............>
ExecuteThread: '1'<BEA-180113> <00 00 00 10 00 10 DF 9D 00 00 00 01 02 10 DF 93 00 00 00 01 .......?.......?....>
ExecuteThread: '1'<BEA-180113> <0A 10 DF 2F 00 00 00 13 00 00 00 0B 46 4F 58 5F 53 59 53 54 ............FOX.SYST>
ExecuteThread: '1'<BEA-180113> <45 4D 00 00 0A 10 DF 39 00 00 00 1A 00 00 00 12 38 39 63 61 EM.....9........89ca>
ExecuteThread: '1'<BEA-180113> <2D 61 31 34 66 65 65 31 32 34 34 36 65 00 00 00 0A 10 DF 43 .a14fee12446e......C>
ExecuteThread: '1'<BEA-180113> <00 00 00 13 00 00 00 0B 46 4F 58 5F 53 59 53 54 45 4D 00 00 ........FOX.SYSTEM..>
ExecuteThread: '1'<BEA-180113> <0A 10 DF 4D 00 00 00 14 00 00 00 0C 47 53 4D 5F 47 65 74 41 ...M........GSM.GetA>
ExecuteThread: '1'<BEA-180113> <63 63 74 00 0A 10 DF F7 00 00 00 0C 00 00 00 04 46 4F 58 00 cct.............FOX.>
ExecuteThread: '1'<BEA-180113> <0A 11 3E 7B 00 00 00 11 00 00 00 09 32 32 32 32 32 32 32 32 ............22222222>
ExecuteThread: '1'<BEA-180113> <00 00 00 00 .... >
ExecuteThread: '1'<BEA-180073> <+++++ END +++++>
ExecuteThread: '1'<BEA-180046> </write_dom_65_tfmh/total calculated_size=280>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/writeTuxedoMessage/>
ExecuteThread: '1'<BEA-180046> </TpeOut/writeTuxedoMessage/myNeedToWrite=32/myMark=32/myProtocol=13/parsedMetahdr=false>
ExecuteThread: '1'<BEA-180046> <]/TpeOut/writeTuxedoMessage/70/>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '1'<BEA-180046> <]/TpeOut/write/10/>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '1'<BEA-180046> <]/TpeOut/write/10/>
ExecuteThread: '1'<BEA-180046> </tfmh/write_dom_65_tfmh/TdomTcb=TDOM:GWNW_XATMI_CALL:2:-1:0:0:32:0:0:0:0:50:GSM_GetAcct>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '1'<BEA-180046> <]/TpeOut/write/10/>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '1'<BEA-180046> <[/TpeOut/writeTuxedoMessage/>
ExecuteThread: '1'<BEA-180046> </TpeOut/writeTuxedoMessage/myNeedToWrite=280/myMark=280/myProtocol=13/parsedMetahdr=true>
ExecuteThread: '1'<BEA-180046> <*]/TpeOut/writeTuxedoMessage/40/>
ExecuteThread: '1'<BEA-180046> <]/TpeOut/write/30/>
ExecuteThread: '1'<BEA-180046> <]/write_dom_65_tfmh/110/0/>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/_tpacall_internal/40/SessionAcallDescriptor:2:false>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/tpacall/100/SessionAcallDescriptor:2:false>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/tpgetrply/SessionAcallDescriptor:2:false/32>
ExecuteThread: '1'<BEA-180046> <[/dsession(1)/_tpgetrply_internal/SessionAcallDescriptor:2:false/32>
ExecuteThread: '1'<BEA-180046> <[/TuxRply/get_specific_reply/SessionAcallDescriptor:2:false/weblogic.wtc.gwt.gwdsession@1/true>
ExecuteThread: '1'<BEA-180046> <TuxRply/get_specific_reply: Thr Thread[[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads] waiting for message oid SessionAcallDescriptor:2:false/weblogic.wtc.gwt.gwdsession@1 on lockReq = weblogic.wtc.jatmi.TuxRply$LockReq@948b59>
ExecuteThread: '4' <BEA-180046> <[/TuxedoMuxableSocket/dispatch/>
ExecuteThread: '4' <BEA-180046> </TuxedoMuxableSocket/dispatch/myOffset=444/myDecryptOffset=0/myProtocol=13>
ExecuteThread: '4' <BEA-180046> </TuxedoMuxableSocket/dispatch/size=444>
ExecuteThread: '4' <BEA-180046> <[/rdsession(1)/allocTfmh/>
ExecuteThread: '4' <BEA-180046> </rdsession(1)/allocTfmh/null>
ExecuteThread: '4' <BEA-180046> <]/rdsession(1)/allocTfmh/weblogic.wtc.jatmi.tfmh@489f21>
ExecuteThread: '4' <BEA-180046> <[/read_dom_65_tfmh/13>
ExecuteThread: '4' <BEA-180046> </tfmh/read_dom_65_tfmh/opcode=GWNW_XATMI_REPLY>
ExecuteThread: '4' <BEA-180046> </read_dom_65_tfmh/bufsize=444 available=968>
ExecuteThread: '4' <BEA-180046> </read_dom_65_tfmh/prior compos bufsize=364 available=920>
ExecuteThread: '4' <BEA-180046> </read_dom_65_tfmh/post compos bufsize=364 available=920>
ExecuteThread: '4' <BEA-180046> <Inbound 65 UDATA: buffer type(FML32, null)>
ExecuteThread: '4' <BEA-180072> <+++++ User Data(364) +++++>
ExecuteThread: '4' <BEA-180113> <FF FF D8 F0 00 00 01 2C 00 00 10 00 00 00 00 10 00 00 00 00 ....................>
ExecuteThread: '4' <BEA-180113> <00 00 00 10 0A 10 DF 2F 00 00 00 13 00 00 00 0B 46 4F 58 5F ................FOX.>
ExecuteThread: '4' <BEA-180113> <53 59 53 54 45 4D 00 00 0A 10 DF 39 00 00 00 0E 00 00 00 06 SYSTEM.....9........>
ExecuteThread: '4' <BEA-180113> <44 75 6D 6D 79 00 00 00 0A 10 DF 43 00 00 00 0C 00 00 00 04 Dummy......C........>
ExecuteThread: '4' <BEA-180113> <46 4F 58 00 0A 10 DF 4D 00 00 00 14 00 00 00 0C 47 53 4D 5F FOX....M........GSM.>
ExecuteThread: '4' <BEA-180113> <47 65 74 41 63 63 74 00 0A 10 DF F7 00 00 00 0D 00 00 00 05 GetAcct.............>
ExecuteThread: '4' <BEA-180113> <53 74 75 62 00 00 00 00 0A 11 3E 77 00 00 00 10 00 00 00 08 Stub.......w........>
ExecuteThread: '4' <BEA-180113> <31 32 33 34 2E 35 36 00 0A 11 3E 8A 00 00 00 0F 00 00 00 07 1234.56....?........>
ExecuteThread: '4' <BEA-180113> <33 34 35 2E 36 37 00 00 0A 11 3E 8B 00 00 00 0F 00 00 00 07 345.67.....?........>
ExecuteThread: '4' <BEA-180113> <34 35 36 2E 37 38 00 00 0A 11 3E 8C 00 00 00 0F 00 00 00 07 456.78.....?........>
ExecuteThread: '4' <BEA-180113> <35 36 37 2E 38 39 00 00 0A 11 3E 8D 00 00 00 0F 00 00 00 07 567.89.....?........>
ExecuteThread: '4' <BEA-180113> <32 33 34 2E 35 36 00 00 0A 11 3E 9B 00 00 00 0F 00 00 00 07 234.56.....?........>
ExecuteThread: '4' <BEA-180113> <53 79 64 6E 65 79 00 00 0A 11 3E 9D 00 00 00 16 00 00 00 0E Sydney.....?........>
ExecuteThread: '4' <BEA-180113> <4D 69 6C 6C 65 72 20 53 74 72 65 65 74 00 00 00 0A 11 3E 9E Miller.Street......?>
ExecuteThread: '4' <BEA-180113> <00 00 00 15 00 00 00 0D 4E 6F 72 74 68 20 53 79 64 6E 65 79 ........North.Sydney>
ExecuteThread: '4' <BEA-180113> <00 00 00 00 0A 11 3E 9F 00 00 00 0C 00 00 00 04 4E 53 57 00 .......?........NSW.>
ExecuteThread: '4' <BEA-180113> <0A 11 3E A1 00 00 00 0D 00 00 00 05 32 30 36 30 00 00 00 00 ...?........2060....>
ExecuteThread: '4' <BEA-180113> <0A 11 3E A8 00 00 00 13 00 00 00 0B 4A 6F 68 6E 20 44 75 6D ...?........John.Dum>
ExecuteThread: '4' <BEA-180113> <6D 79 00 00 my.. >
ExecuteThread: '4' <BEA-180073> <+++++ END +++++>
ExecuteThread: '4' <BEA-180046> <[/TypedFML32/_tmpostrecv/364>
ExecuteThread: '4' <BEA-180046> <]/TypedFML32/_tmpostrecv/100/>
ExecuteThread: '4' <BEA-180046> <]/read_dom_65_tfmh/150/0>
ExecuteThread: '4' <BEA-180046> <[/rdsession(1)/dispatch/>
ExecuteThread: '4' <BEA-180046> </rdsession(1)/dispatch/TdomTcb=TDOM:GWNW_XATMI_REPLY:2:-1:0:32:32:0:0:0:0:50:null>
ExecuteThread: '4' <BEA-180046> </rdsession/dispatch/25/reqId = 2>
ExecuteThread: '4' <BEA-180046> <[/rdsession(1)/addlist/weblogic.wtc.jatmi.tfmh@489f21/2>
ExecuteThread: '4' <BEA-180046> </rdsession(1)/addlist/SessionAcallDescriptor:2:false>
ExecuteThread: '4' <BEA-180046> <[/TuxRply/add_reply/weblogic.wtc.gwt.gwdsession@1/SessionAcallDescriptor:2:false>
ExecuteThread: '4' <BEA-180046> <TuxRply/add_reply: found eligible waiter= weblogic.wtc.jatmi.TuxRply$LockReq@948b59 for oid SessionAcallDescriptor:2:false/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '4' <BEA-180046> <]/rdsession(1)/addlist/10/>
ExecuteThread: '1'<BEA-180046> <TuxRply/get_specific_reply: Thr Thread[[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads] got message oid SessionAcallDescriptor:2:false/weblogic.wtc.gwt.gwdsession@1 on lockReq = weblogic.wtc.jatmi.TuxRply$LockReq@948b59>
ExecuteThread: '4' <BEA-180046> <]/rdsession(1)/dispatch/60/>
ExecuteThread: '1'<BEA-180046> <]/TuxRply/get_specific_reply/40/weblogic.wtc.jatmi.tfmh@489f21>
ExecuteThread: '4' <BEA-180046> <]/TuxedoMuxableSocket/dispatch/30/>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/_tpgetrply_internal/20/weblogic.wtc.jatmi.tfmh@489f21>
ExecuteThread: '1'<BEA-180046> <*]/dsession(1)/tpgetrply/85/opcode=2/diagnostic=0>
ExecuteThread: '1'<BEA-180046> <[/rdsession(1)/restoreTfmhToCache/>
ExecuteThread: '1'<BEA-180046> </rdsession(1)/addedtocache=weblogic.wtc.jatmi.tfmh@489f21>
ExecuteThread: '1'<BEA-180046> <]/rdsession(1)/restoreTfmhToCache/30/>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/tpgetrply/100/weblogic.wtc.jatmi.TypedFML32@9d078d:0:SessionAcallDescriptor:2:false>
ExecuteThread: '1'<BEA-180046> <]/dsession(1)/tpcall/20/weblogic.wtc.jatmi.TypedFML32@9d078d:0:SessionAcallDescriptor:2:false>
ExecuteThread: '1'<BEA-180046> <]/TuxedoConnection/tpcall/40/weblogic.wtc.jatmi.TypedFML32@9d078d:0:SessionAcallDescriptor:2:false>
ExecuteThread: '1'<BEA-180046> <[/TuxedoConnection/tpterm/>
ExecuteThread: '1'<BEA-180046> <]/TuxedoConnection/tpterm/10>
and the unsuccessful call:
ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1250643290962> <BEA-180046> <[/TuxedoConnection/TuxedoConnection/>
ExecuteThread: '0' <BEA-180046> <no transaction>
ExecuteThread: '0' <BEA-180046> <]/TuxedoConnection/TuxedoConnection/30>
ExecuteThread: '0' <BEA-180046> <[/TuxedoConnection/tpcall/GSM_GetAcct/32>
ExecuteThread: '0' <BEA-180046> <[/TuxedoConnection/getProviderRoute/GSM_GetAcct>
ExecuteThread: '0' <BEA-180046> <[/WTCRouteManager/selectTargetRotes/GSM_GetAcct>
ExecuteThread: '0' <BEA-180046> <[/WTCService/getImport/(svc = GSM_GetAcct, xid = null)>
ExecuteThread: '0' <BEA-180046> <[/TDMImport/getStatus/>
ExecuteThread: '0' <BEA-180046> <[/TDMRemoteTDomain/getTsession/MTS-Remote, create = false>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/getIsTerminated/ldom=WTC_OBF rdom=OBF_WTC>
ExecuteThread: '0' <BEA-180046> <]/dsession(1)/getIsTerminated/false>
ExecuteThread: '0' <BEA-180046> <]/TDMRemoteTDomain/getTsession/10/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '0' <BEA-180046> </TDMRemoteTDomain/getTsession/100/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '0' <BEA-180046> <]/TDMImport/getStatus/30/AVAILABLE>
ExecuteThread: '0' <BEA-180046> <]/WTCService/getImport/40/(0)>
ExecuteThread: '0' <BEA-180046> <[/TDMRemoteTDomain/getTsession/MTS-Remote, create = true>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/getIsTerminated/ldom=WTC_OBF rdom=OBF_WTC>
ExecuteThread: '0' <BEA-180046> <]/dsession(1)/getIsTerminated/false>
ExecuteThread: '0' <BEA-180046> <]/TDMRemoteTDomain/getTsession/10/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '0' <BEA-180046> </TDMRemoteTDomain/getTsession/100/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '0' <BEA-180046> <]/WTCRouteManager/selectTargetRotes/30/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '0' <BEA-180046> <]/TuxedoConnection/getProviderRoute/20>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/tpcall/GSM_GetAcct/weblogic.wtc.jatmi.TypedFML32@73a146/32/null>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/tpacall/GSM_GetAcct/weblogic.wtc.jatmi.TypedFML32@73a146/32/null/0>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/_tpacall_internal/GSM_GetAcct/weblogic.wtc.jatmi.tfmh@610734/32/null/0>
ExecuteThread: '0' <BEA-180046> <myAppKey = null>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/alloc_TDOM/1/GSM_GetAcct>
ExecuteThread: '0' <BEA-180046> <]/dsession(1)/alloc_TDOM/10/TDOM:GWNW_XATMI_CALL:3:-1:0:0:32:0:0:0:0:50:GSM_GetAcct>
ExecuteThread: '0' <BEA-180046> <[/rdsession(1)/add_rplyObj/SessionAcallDescriptor:3:false/weblogic.wtc.jatmi.TuxRply@f29035/-1>
ExecuteThread: '0' <BEA-180046> <]/rdsession(1)/add_rplyObj/40/>
ExecuteThread: '0' <BEA-180046> <[/write_dom_65_tfmh/WTC_OBF/13/2147483647>
ExecuteThread: '0' <BEA-180046> </write_dom_65_tfmh/header calculated_size=76>
ExecuteThread: '0' <BEA-180046> </write_dom_65_tfmh/opcode calculated_size=96>
ExecuteThread: '0' <BEA-180046> <[/FML32/_tmpresend/java.io.DataOutputStream@200fa2>
ExecuteThread: '0' <BEA-180046> <numPointerFields=0 numView32Fields=0 numFml32Fields=0>
ExecuteThread: '0' <BEA-180046> <]/TypedFML32/_tmpresend/60/>
ExecuteThread: '0' <BEA-180046> <Outbound UDATA: buffer type(FML32, null)>
ExecuteThread: '0' <BEA-180072> <+++++ 65 User Data(184) +++++>
ExecuteThread: '0' <BEA-180113> <FF FF D8 F0 00 00 00 B8 7F FF FF FF 00 00 00 08 00 00 00 00 .......?............>
ExecuteThread: '0' <BEA-180113> <00 00 00 10 00 10 DF 9D 00 00 00 01 02 10 DF 93 00 00 00 01 .......?.......?....>
ExecuteThread: '0' <BEA-180113> <0A 10 DF 2F 00 00 00 13 00 00 00 0B 46 4F 58 5F 53 59 53 54 ............FOX.SYST>
ExecuteThread: '0' <BEA-180113> <45 4D 00 00 0A 10 DF 39 00 00 00 1A 00 00 00 12 38 66 33 64 EM.....9........8f3d>
ExecuteThread: '0' <BEA-180113> <2D 39 34 63 39 34 61 30 30 61 35 62 66 00 00 00 0A 10 DF 43 .94c94a00a5bf......C>
ExecuteThread: '0' <BEA-180113> <00 00 00 13 00 00 00 0B 46 4F 58 5F 53 59 53 54 45 4D 00 00 ........FOX.SYSTEM..>
ExecuteThread: '0' <BEA-180113> <0A 10 DF 4D 00 00 00 14 00 00 00 0C 47 53 4D 5F 47 65 74 41 ...M........GSM.GetA>
ExecuteThread: '0' <BEA-180113> <63 63 74 00 0A 10 DF F7 00 00 00 0C 00 00 00 04 46 4F 58 00 cct.............FOX.>
ExecuteThread: '0' <BEA-180113> <0A 11 3E 7B 00 00 00 11 00 00 00 09 32 32 32 32 32 32 32 32 ............22222222>
ExecuteThread: '0' <BEA-180113> <00 00 00 00 .... >
ExecuteThread: '0' <BEA-180073> <+++++ END +++++>
ExecuteThread: '0' <BEA-180046> </write_dom_65_tfmh/total calculated_size=280>
ExecuteThread: '0' <BEA-180046> <[/TpeOut/writeTuxedoMessage/>
ExecuteThread: '0' <BEA-180046> </TpeOut/writeTuxedoMessage/myNeedToWrite=32/myMark=32/myProtocol=13/parsedMetahdr=false>
ExecuteThread: '0' <BEA-180046> <]/TpeOut/writeTuxedoMessage/70/>
ExecuteThread: '0' <BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '0' <BEA-180046> <]/TpeOut/write/10/>
ExecuteThread: '0' <BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '0' <BEA-180046> <]/TpeOut/write/10/>
ExecuteThread: '0' <BEA-180046> </tfmh/write_dom_65_tfmh/TdomTcb=TDOM:GWNW_XATMI_CALL:3:-1:0:0:32:0:0:0:0:50:GSM_GetAcct>
ExecuteThread: '0' <BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '0' <BEA-180046> <]/TpeOut/write/10/>
ExecuteThread: '0' <BEA-180046> <[/TpeOut/write(b)/>
ExecuteThread: '0' <BEA-180046> <[/TpeOut/writeTuxedoMessage/>
ExecuteThread: '0' <BEA-180046> </TpeOut/writeTuxedoMessage/myNeedToWrite=280/myMark=280/myProtocol=13/parsedMetahdr=true>
ExecuteThread: '0' <BEA-180046> <*]/TpeOut/writeTuxedoMessage/40/>
ExecuteThread: '0' <BEA-180046> <]/TpeOut/write/30/>
ExecuteThread: '0' <BEA-180046> <]/write_dom_65_tfmh/110/0/>
ExecuteThread: '0' <BEA-180046> <]/dsession(1)/_tpacall_internal/40/SessionAcallDescriptor:3:false>
ExecuteThread: '0' <BEA-180046> <]/dsession(1)/tpacall/100/SessionAcallDescriptor:3:false>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/tpgetrply/SessionAcallDescriptor:3:false/32>
ExecuteThread: '0' <BEA-180046> <[/dsession(1)/_tpgetrply_internal/SessionAcallDescriptor:3:false/32>
ExecuteThread: '0' <BEA-180046> <[/TuxRply/get_specific_reply/SessionAcallDescriptor:3:false/weblogic.wtc.gwt.gwdsession@1/true>
ExecuteThread: '0' <BEA-180046> <TuxRply/get_specific_reply: Thr Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads] waiting for message oid SessionAcallDescriptor:3:false/weblogic.wtc.gwt.gwdsession@1 on lockReq = weblogic.wtc.jatmi.TuxRply$LockReq@e28ba0>
ExecuteThread: '4' <BEA-180046> <[/TuxedoMuxableSocket/dispatch/>
ExecuteThread: '4' <BEA-180046> </TuxedoMuxableSocket/dispatch/myOffset=444/myDecryptOffset=0/myProtocol=13>
ExecuteThread: '4' <BEA-180046> </TuxedoMuxableSocket/dispatch/size=444>
ExecuteThread: '4' <BEA-180046> <[/rdsession(1)/allocTfmh/>
ExecuteThread: '4' <BEA-180046> </rdsession(1)/allocTfmh/weblogic.wtc.jatmi.tfmh@489f21>
ExecuteThread: '4' <BEA-180046> <]/rdsession(1)/allocTfmh/weblogic.wtc.jatmi.tfmh@489f21>
ExecuteThread: '4' <BEA-180046> <[/read_dom_65_tfmh/13>
ExecuteThread: '4' <BEA-180046> <]/read_dom_65_tfmh/20/-1/-10000/1938831426>
ExecuteThread: '4' <BEA-180046> <[/TuxedoMuxableSocket/endOfStream/>
ExecuteThread: '4' <BEA-180046> <[/dsession(WTC_OBF, OBF_WTC)/setIsTerminated>
ExecuteThread: '4' <BEA-180046> <[/dsession(WTC_OBF, OBF_WTC)/termimateTDomainSession/false>
ExecuteThread: '4' <BEA-180046> <[/TDMRemoteTDomain/onTerm/1>
ExecuteThread: '4' <BEA-180046> <]/TDMRemoteTDomain/onTerm/20>
ExecuteThread: '4' <BEA-180046> <]/dsession/terminateTDomainSession(30)>
ExecuteThread: '4' <BEA-180046> <]/dsession/setIsTerminated(10)/done>
ExecuteThread: '4' <BEA-180046> <[/rdsession(1)/remove_rplyObj/SessionAcallDescriptor:3:false>
ExecuteThread: '4' <BEA-180046> <]/rdsession(1)/remove_rplyObj/20/true>
ExecuteThread: '4' <BEA-180046> <[/TuxRply/add_reply/weblogic.wtc.gwt.gwdsession@1/SessionAcallDescriptor:3:false>
ExecuteThread: '4' <BEA-180046> <TuxRply/add_reply: found eligible waiter= weblogic.wtc.jatmi.TuxRply$LockReq@e28ba0 for oid SessionAcallDescriptor:3:false/weblogic.wtc.gwt.gwdsession@1>
ExecuteThread: '4' <BEA-180046> </rdsession/connectionHasTerminated/10: TPESYSTEM sent>
ExecuteThread: '4' <BEA-180046> <]/TuxedoMuxableSocket/endOfStream/10>
ExecuteThread: '4' <BEA-180046> <[/dsession(WTC_OBF, OBF_WTC)/setIsTerminated>
ExecuteThread: '4' <BEA-180046> <]/dsession/setIsTerminated(10)/done>
ExecuteThread: '4' <BEA-180046> <]/TuxedoMuxableSocket/dispatch/90/failure=-1>
ExecuteThread: '0' <BEA-180046> <TuxRply/get_specific_reply: Thr Thread[[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads] got message oid SessionAcallDescriptor:3:false/weblogic.wtc.gwt.gwdsession@1 on lockReq = weblogic.wtc.jatmi.TuxRply$LockReq@e28ba0>
ExecuteThread: '0' <BEA-180046> <]/TuxRply/get_specific_reply/40/weblogic.wtc.jatmi.tfmh@aa352e>
ExecuteThread: '0' <BEA-180046> <]/dsession(1)/_tpgetrply_internal/20/weblogic.wtc.jatmi.tfmh@aa352e>
ExecuteThread: '0' <BEA-180046> <*]/dsession(1)/tpgetrply/85/opcode=3/diagnostic=12>
ExecuteThread: '0' <BEA-180046> <*]/dsession(1)/tpgetrply/95/>
ExecuteThread: '0' <BEA-180046> <*]/dsession(1)/tpcall/30/TPESYSTEM(12):0:0:TPED_MINVAL(0):QMNONE(0):0>
ExecuteThread: '0' <BEA-180046> <*]/TuxedoConnection/tpcall/30/TPESYSTEM(12):0:0:TPED_MINVAL(0):QMNONE(0):0>
ExecuteThread: '0' <BEA-180046> <[/TuxedoConnection/tpterm/>
ExecuteThread: '0' <BEA-180046> <]/TuxedoConnection/tpterm/10>

Hi Todd,
Thanks for responding.
The Tuxedo developer here has provided me with the following information:
The Tuxedo version is 6.5 and the patch level as seen in the last line of $TUXDIR/udataobj/patchlev file is "389. CR093934 TUX 6.5 > HP-UX 11 64-bit /Domain is unable to connect to 32-bit domains"
The OS, Tuxedo is running on is: "HP-UX B.11.11 U 9000/800 485721183 unlimited-user license"
In the Tuxedo ULOG file, I can see that the MTS service has received the request from WTC and the response being logged as well, without any error. However immediately after the request is completed, error messages is logged. The extract of this message is shown below:
130843.focdevapph001!GWTDOMAIN.4780: LIBGWT_CAT:1130: INFO: Disconnected from domain (domainid=<WTC_OBF>)
130843.focdevapph001!GWTDOMAIN.4780: LIBGWT_CAT:1354: INFO: Retrying domain (domainid=<WTC_OBF>) every 60 seconds
130843.focdevapph001!GWTDOMAIN.4780: LIBGWT_CAT:2005: INFO: Receive connecting request from remote domain (domainid<WTC_OBF>)
130843.focdevapph001!GWTDOMAIN.4780: LIBGWT_CAT:1128: INFO: Connection accepted from domain (domainid=<WTC_OBF>)
Here is the WTC config fragment:
<wtc-server>
<name>MTS</name>
<target>AdminServer</target>
<wtc-local-tux-dom>
<name>MTS-Local</name>
<access-point>MTS-Local</access-point>
<access-point-id>WTC_OBF</access-point-id>
<security>NONE</security>
<connection-policy>ON_STARTUP</connection-policy>
<nw-addr>//localhost:7050</nw-addr>
<interoperate>Yes</interoperate>
</wtc-local-tux-dom>
<wtc-remote-tux-dom>
<name>MTS-Remote</name>
<access-point>MTS-Remote</access-point>
<access-point-id>OBF_WTC</access-point-id>
<connection-policy>ON_STARTUP</connection-policy>
<credential-policy>LOCAL</credential-policy>
<local-access-point>MTS-Local</local-access-point>
<retry-interval>10</retry-interval>
<max-retries>10</max-retries>
<nw-addr>//focdevapph001:25395</nw-addr>
<federation-url></federation-url>
<federation-name></federation-name>
</wtc-remote-tux-dom>
<wtc-import>
<name>WTCImportedService-0</name>
<resource-name>GSM_GetAcct</resource-name>
<local-access-point>MTS-Local</local-access-point>
<remote-access-point-list>MTS-Remote</remote-access-point-list>
<remote-name>GSM_GetAcct</remote-name>
</wtc-import>
<wtc-import>
<name>WTCImportedService-1</name>
<resource-name>GSM_GetBillPay</resource-name>
<local-access-point>MTS-Local</local-access-point>
<remote-access-point-list>MTS-Remote</remote-access-point-list>
<remote-name>GSM_GetBillPay</remote-name>
</wtc-import>
<wtc-import>
<name>WTCImportedService-2</name>
<resource-name>SvcGetBilling</resource-name>
<local-access-point>MTS-Local</local-access-point>
<remote-access-point-list>MTS-Remote</remote-access-point-list>
<remote-name>SvcGetBilling</remote-name>
</wtc-import>
</wtc-server>
Finally, some tcpdump data:
Successful call:
11:41:44.715758 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: S 521001588:521001588(0) win 65535 <mss 1460,nop,wscale 3,nop,nop,timestamp 858559006 0,sackOK,eol>
0x0000: 4500 0040 7a3d 4000 4006 e571 0a10 2945 E..@z=@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d da74 0000 0000 .+....c3...t....
0x0020: b002 ffff 6f29 0000 0204 05b4 0103 0303 ....o)..........
0x0030: 0101 080a 332c 921e 0000 0000 0402 0000 ....3,..........
11:41:44.716690 IP focdevapph001.optus.com.au.25395 > wsp165668wss.optus.com.au.51916: S 1330679351:1330679351(0) ack 521001589 win 32768 <mss 1460,nop,nop,sackOK,wscale 0,nop,nop,nop,timestamp 42832250 858559006>
0x0000: 4500 0040 5e44 4000 3e06 036b a12b 0689 E..@^D@.>..k.+..
0x0010: 0a10 2945 6333 cacc 4f50 8e37 1f0d da75 ..)Ec3..OP.7...u
0x0020: b012 8000 7d89 0000 0204 05b4 0101 0402 ....}...........
0x0030: 0303 0001 0101 080a 028d 917a 332c 921e ...........z3,..
11:41:44.716786 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: . ack 1 win 65535 <nop,nop,timestamp 858559006 42832250>
0x0000: 4500 0034 1575 4000 4006 4a46 0a10 2945 E..4.u@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d da75 4f50 8e38 .+....c3...uOP.8
0x0020: 8010 ffff 3d56 0000 0101 080a 332c 921e ....=V......3,..
0x0030: 028d 917a ...z
11:41:44.718457 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: P 1:541(540) ack 1 win 65535 <nop,nop,timestamp 858559006 42832250>
0x0000: 4500 0250 7254 4000 4006 eb4a 0a10 2945 E..PrT@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d da75 4f50 8e38 .+....c3...uOP.8
0x0020: 8018 ffff 8a75 0000 0101 080a 332c 921e .....u......3,..
0x0030: 028d 917a 7390 3842 0000 000e 0000 0001 ...zs.8B........
0x0040: ffff ffff 0000 0000 0000 0000 0000 0001 ................
0x0050: 0000 021c 0000 0057 0000 0054 0000 0043 .......W...T...C
0x0060: 0000 005f 0000 004f 0000 0042 0000 0046 ..._...O...B...F
0x0070: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0080: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0090: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0100: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0110: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0120: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0130: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0140: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0150: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0160: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0170: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0180: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0190: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01f0: 0000 ..
11:41:44.719850 IP focdevapph001.optus.com.au.25395 > wsp165668wss.optus.com.au.51916: P 1:545(544) ack 541 win 32768 <nop,nop,timestamp 42832251 858559006>
0x0000: 4500 0254 5e45 4000 3e06 0156 a12b 0689 E..T^E@.>..V.+..
0x0010: 0a10 2945 6333 cacc 4f50 8e38 1f0d dc91 ..)Ec3..OP.8....
0x0020: 8018 8000 087b 0000 0101 080a 028d 917b .....{.........{
0x0030: 332c 921e 7390 3842 0000 000f 0000 0001 3,..s.8B........
0x0040: ffff ffff 0000 0000 0000 0020 0000 0001 ................
0x0050: 0000 0220 0000 004f 0000 0042 0000 0046 .......O...B...F
0x0060: 0000 005f 0000 0057 0000 0054 0000 0043 ..._...W...T...C
0x0070: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0080: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0090: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x00f0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0100: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0110: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0120: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0130: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0140: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0150: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0160: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0170: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0180: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0190: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01a0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01b0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01c0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01d0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x01f0: 0000 ..
11:41:44.719932 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: . ack 545 win 65535 <nop,nop,timestamp 858559006 42832251>
0x0000: 4500 0034 9811 4000 4006 c7a9 0a10 2945 E..4..@.@.....)E
0x0010: a12b 0689 cacc 6333 1f0d dc91 4f50 9058 .+....c3....OP.X
0x0020: 8010 ffff 3919 0000 0101 080a 332c 921e ....9.......3,..
0x0030: 028d 917b ...{
11:41:44.729113 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: P 541:805(264) ack 545 win 65535 <nop,nop,timestamp 858559006 42832251>
0x0000: 4500 013c fb6b 4000 4006 6347 0a10 2945 E..<.k@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d dc91 4f50 9058 .+....c3....OP.X
0x0020: 8018 ffff efcc 0000 0101 080a 332c 921e ............3,..
0x0030: 028d 917b 7390 3842 0000 0001 0000 0002 ...{s.8B........
0x0040: ffff ffff 0000 0000 0000 0000 0000 0001 ................
0x0050: 0000 0108 0000 0007 5754 435f 4f42 4600 ........WTC_OBF.
0x0060: 0000 0020 0000 0000 0000 0000 0000 0000 ................
0x0070: 0000 0005 464d 4c33 3200 0000 0000 0000 ....FML32.......
0x0080: 0000 000c 0000 000b 4753 4d5f 4765 7441 ........GSM_GetA
0x0090: 6363 7400 ffff d8f0 0000 00a8 7fff ffff cct.............
0x00a0: 0000 0008 0000 0000 0000 0010 0010 df9d ................
0x00b0: 0000 0001 0210 df93 0000 0001 0a10 df2f .............../
0x00c0: 0000 0009 0000 0001 0000 0000 0a10 df39 ...............9
0x00d0: 0000 001a 0000 0012 6236 3764 2d34 6666 ........b67d-4ff
0x00e0: 3631 6632 3139 3535 3700 0000 0a10 df43 61f219557......C
0x00f0: 0000 0009 0000 0001 0000 0000 0a10 df4d ...............M
0x0100: 0000 0014 0000 000c 4753 4d5f 4765 7441 ........GSM_GetA
0x0110: 6363 7400 0a10 dff7 0000 0009 0000 0001 cct.............
0x0120: 0000 0000 0a11 3e7b 0000 0012 0000 000a ......>{........
0x0130: 3132 3331 3133 3331 3400 0000 123113314...
11:41:44.768190 IP focdevapph001.optus.com.au.25395 > wsp165668wss.optus.com.au.51916: P 545:989(444) ack 805 win 32768 <nop,nop,timestamp 42832256 858559006>
0x0000: 4500 01f0 5e46 4000 3e06 01b9 a12b 0689 E...^F@.>....+..
0x0010: 0a10 2945 6333 cacc 4f50 9058 1f0d dd99 ..)Ec3..OP.X....
0x0020: 8018 8000 3762 0000 0101 080a 028d 9180 ....7b..........
0x0030: 332c 921e 7390 3842 0000 0002 0000 0002 3,..s.8B........
0x0040: ffff ffff 0000 0000 0000 0020 0000 0001 ................
0x0050: 0000 01bc 0000 0007 4f42 465f 5754 4300 ........OBF_WTC.
0x0060: 0000 0020 0000 0000 0000 0000 0000 0000 ................
0x0070: 0000 0005 464d 4c33 3200 0000 0000 0000 ....FML32.......
0x0080: 0000 0000 ffff d8f0 0000 012c 0000 1000 ...........,....
0x0090: 0000 0010 0000 0000 0000 0010 0a10 df2f .............../
0x00a0: 0000 0013 0000 000b 464f 585f 5359 5354 ........FOX_SYST
0x00b0: 454d 0000 0a10 df39 0000 000e 0000 0006 EM.....9........
0x00c0: 4475 6d6d 7900 0000 0a10 df43 0000 000c Dummy......C....
0x00d0: 0000 0004 464f 5800 0a10 df4d 0000 0014 ....FOX....M....
0x00e0: 0000 000c 4753 4d5f 4765 7441 6363 7400 ....GSM_GetAcct.
0x00f0: 0a10 dff7 0000 000d 0000 0005 5374 7562 ............Stub
0x0100: 0000 0000 0a11 3e77 0000 0010 0000 0008 ......>w........
0x0110: 3132 3334 2e35 3600 0a11 3e8a 0000 000f 1234.56...>.....
0x0120: 0000 0007 3334 352e 3637 0000 0a11 3e8b ....345.67....>.
0x0130: 0000 000f 0000 0007 3435 362e 3738 0000 ........456.78..
0x0140: 0a11 3e8c 0000 000f 0000 0007 3536 372e ..>.........567.
0x0150: 3839 0000 0a11 3e8d 0000 000f 0000 0007 89....>.........
0x0160: 3233 342e 3536 0000 0a11 3e9b 0000 000f 234.56....>.....
0x0170: 0000 0007 5379 646e 6579 0000 0a11 3e9d ....Sydney....>.
0x0180: 0000 0016 0000 000e 4d69 6c6c 6572 2053 ........Miller.S
0x0190: 7472 6565 7400 0000 0a11 3e9e 0000 0015 treet.....>.....
0x01a0: 0000 000d 4e6f 7274 6820 5379 646e 6579 ....North.Sydney
0x01b0: 0000 0000 0a11 3e9f 0000 000c 0000 0004 ......>.........
0x01c0: 4e53 5700 0a11 3ea1 0000 000d 0000 0005 NSW...>.........
0x01d0: 3230 3630 0000 0000 0a11 3ea8 0000 0013 2060......>.....
0x01e0: 0000 000b 4a6f 686e 2044 756d 6d79 0000 ....John.Dummy..
11:41:44.768327 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: . ack 989 win 65535 <nop,nop,timestamp 858559006 42832256>
0x0000: 4500 0034 b478 4000 4006 ab42 0a10 2945 E..4.x@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d dd99 4f50 9214 .+....c3....OP..
0x0020: 8010 ffff 3650 0000 0101 080a 332c 921e ....6P......3,..
0x0030: 028d 9180 ....
Unsuccessful call:
11:43:19.024968 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: P 805:1069(264) ack 989 win 65535 <nop,nop,timestamp 858559948 42832256>
0x0000: 4500 013c 081f 4000 4006 5694 0a10 2945 E..<..@[email protected]...)E
0x0010: a12b 0689 cacc 6333 1f0d dd99 4f50 9214 .+....c3....OP..
0x0020: 8018 ffff bd55 0000 0101 080a 332c 95cc .....U......3,..
0x0030: 028d 9180 7390 3842 0000 0001 0000 0003 ....s.8B........
0x0040: ffff ffff 0000 0000 0000 0000 0000 0001 ................
0x0050: 0000 0108 0000 0007 5754 435f 4f42 4600 ........WTC_OBF.
0x0060: 0000 0020 0000 0000 0000 0000 0000 0000 ................
0x0070: 0000 0005 464d 4c33 3200 0000 0000 0000 ....FML32.......
0x0080: 0000 000c 0000 000b 4753 4d5f 4765 7441 ........GSM_GetA
0x0090: 6363 7400 ffff d8f0 0000 00a8 7fff ffff cct.............
0x00a0: 0000 0008 0000 0000 0000 0010 0010 df9d ................
0x00b0: 0000 0001 0210 df93 0000 0001 0a10 df2f .............../
0x00c0: 0000 0009 0000 0001 0000 0000 0a10 df39 ...............9
0x00d0: 0000 001a 0000 0012 3862 3730 2d38 6337 ........8b70-8c7
0x00e0: 3234 6539 6432 3364 6400 0000 0a10 df43 24e9d23dd......C
0x00f0: 0000 0009 0000 0001 0000 0000 0a10 df4d ...............M
0x0100: 0000 0014 0000 000c 4753 4d5f 4765 7441 ........GSM_GetA
0x0110: 6363 7400 0a10 dff7 0000 0009 0000 0001 cct.............
0x0120: 0000 0000 0a11 3e7b 0000 0012 0000 000a ......>{........
0x0130: 3132 3331 3133 3331 3400 0000 123113314...
11:43:19.027592 IP focdevapph001.optus.com.au.25395 > wsp165668wss.optus.com.au.51916: P 989:1433(444) ack 1069 win 32768 <nop,nop,timestamp 42841681 858559948>
0x0000: 4500 01f0 5e47 4000 3e06 01b8 a12b 0689 E...^G@.>....+..
0x0010: 0a10 2945 6333 cacc 4f50 9214 1f0d dea1 ..)Ec3..OP......
0x0020: 8018 8000 0c1e 0000 0101 080a 028d b651 ...............Q
0x0030: 332c 95cc 7390 3842 0000 0002 0000 0003 3,..s.8B........
0x0040: ffff ffff 0000 0000 0000 0020 0000 0001 ................
0x0050: 0000 01bc 0000 0007 4f42 465f 5754 4300 ........OBF_WTC.
0x0060: 0000 0020 0000 0000 0000 0000 0000 0000 ................
0x0070: 0000 0005 464d 4c33 3200 0000 0000 0000 ....FML32.......
0x0080: 0000 0000 ffff d8f0 0000 012c 0000 1000 ...........,....
0x0090: 0000 0010 0000 0000 0000 0010 0a10 df2f .............../
0x00a0: 0000 0013 0000 000b 464f 585f 5359 5354 ........FOX_SYST
0x00b0: 454d 0000 0a10 df39 0000 000e 0000 0006 EM.....9........
0x00c0: 4475 6d6d 7900 0000 0a10 df43 0000 000c Dummy......C....
0x00d0: 0000 0004 464f 5800 0a10 df4d 0000 0014 ....FOX....M....
0x00e0: 0000 000c 4753 4d5f 4765 7441 6363 7400 ....GSM_GetAcct.
0x00f0: 0a10 dff7 0000 000d 0000 0005 5374 7562 ............Stub
0x0100: 0000 0000 0a11 3e77 0000 0010 0000 0008 ......>w........
0x0110: 3132 3334 2e35 3600 0a11 3e8a 0000 000f 1234.56...>.....
0x0120: 0000 0007 3334 352e 3637 0000 0a11 3e8b ....345.67....>.
0x0130: 0000 000f 0000 0007 3435 362e 3738 0000 ........456.78..
0x0140: 0a11 3e8c 0000 000f 0000 0007 3536 372e ..>.........567.
0x0150: 3839 0000 0a11 3e8d 0000 000f 0000 0007 89....>.........
0x0160: 3233 342e 3536 0000 0a11 3e9b 0000 000f 234.56....>.....
0x0170: 0000 0007 5379 646e 6579 0000 0a11 3e9d ....Sydney....>.
0x0180: 0000 0016 0000 000e 4d69 6c6c 6572 2053 ........Miller.S
0x0190: 7472 6565 7400 0000 0a11 3e9e 0000 0015 treet.....>.....
0x01a0: 0000 000d 4e6f 7274 6820 5379 646e 6579 ....North.Sydney
0x01b0: 0000 0000 0a11 3e9f 0000 000c 0000 0004 ......>.........
0x01c0: 4e53 5700 0a11 3ea1 0000 000d 0000 0005 NSW...>.........
0x01d0: 3230 3630 0000 0000 0a11 3ea8 0000 0013 2060......>.....
0x01e0: 0000 000b 4a6f 686e 2044 756d 6d79 0000 ....John.Dummy..
11:43:19.027720 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: . ack 1433 win 65535 <nop,nop,timestamp 858559948 42841681>
0x0000: 4500 0034 9c5b 4000 4006 c35f 0a10 2945 E..4.[@.@.._..)E
0x0010: a12b 0689 cacc 6333 1f0d dea1 4f50 93d0 .+....c3....OP..
0x0020: 8010 ffff 0b0d 0000 0101 080a 332c 95cc ............3,..
0x0030: 028d b651 ...Q
11:43:19.029667 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: F 1069:1069(0) ack 1433 win 65535 <nop,nop,timestamp 858559948 42841681>
0x0000: 4500 0034 9748 4000 4006 c872 0a10 2945 E..4.H@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d dea1 4f50 93d0 .+....c3....OP..
0x0020: 8011 ffff 0b0c 0000 0101 080a 332c 95cc ............3,..
0x0030: 028d b651 ...Q
11:43:19.030434 IP focdevapph001.optus.com.au.25395 > wsp165668wss.optus.com.au.51916: . ack 1070 win 32768 <nop,nop,timestamp 42841682 858559948>
0x0000: 4500 0034 5e48 4000 3e06 0373 a12b 0689 E..4^H@.>..s.+..
0x0010: 0a10 2945 6333 cacc 4f50 93d0 1f0d dea2 ..)Ec3..OP......
0x0020: 8010 8000 8b0a 0000 0101 080a 028d b652 ...............R
0x0030: 332c 95cc 3,..
11:43:19.030467 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: . ack 1433 win 65535 <nop,nop,timestamp 858559948 42841682>
0x0000: 4500 0034 8f72 4000 4006 d048 0a10 2945 E..4.r@[email protected]..)E
0x0010: a12b 0689 cacc 6333 1f0d dea2 4f50 93d0 .+....c3....OP..
0x0020: 8010 ffff 0b0b 0000 0101 080a 332c 95cc ............3,..
0x0030: 028d b652 ...R
11:43:19.030747 IP focdevapph001.optus.com.au.25395 > wsp165668wss.optus.com.au.51916: F 1433:1433(0) ack 1070 win 0 <nop,nop,timestamp 42841682 858559948>
0x0000: 4500 0034 5e49 4000 3e06 0372 a12b 0689 E..4^I@.>..r.+..
0x0010: 0a10 2945 6333 cacc 4f50 93d0 1f0d dea2 ..)Ec3..OP......
0x0020: 8011 0000 0b0a 0000 0101 080a 028d b652 ...............R
0x0030: 332c 95cc 3,..
11:43:19.030772 IP wsp165668wss.optus.com.au.51916 > focdevapph001.optus.com.au.25395: . ack 1434 win 65535 <nop,nop,timestamp 858559948 42841682>
0x0000: 4500 0034 403c 4000 4006 1f7f 0a10 2945 E..4@<@.@.....)E
0x0010: a12b 0689 cacc 6333 1f0d dea2 4f50 93d1 .+....c3....OP..
0x0020: 8010 ffff 0b0a 0000 0101 080a 332c 95cc ............3,..
0x0030: 028d b652 ...R

DWM Hackers Unite! Share (or request) dwm patches.

I'm not interested in getting yet another conversation about how people configuring their dwm or in having yet another thread full of screenshots. I'm starting this thread so people have a channel to share their dwm patches and hacks. Feel free to make requests or ask for help as well with your own endeavors as well.
Here are mine:
nbalanced
Its a one or two line tweak of nmaster.c. Behaves saner, imho. It no longer rushes to fill the master area, behaving kinda like gaplessgrid until the nmaster "level" is reached. Probably not the best name, but meh. Both tile and bstack version are "corrected".
nbalanced.c = http://github.com/simongmzlj/dwm/blob/m … balanced.c
opacify
A modified transparency patch. Requires xcompmgr to be running. I changed the transparency level to an int and added functions to allow runtime increasing/decreasing of transparency.
opacify.c = http://github.com/simongmzlj/dwm/blob/master/opacity.c
opacify.diff = http://github.com/simongmzlj/dwm/blob/m … acity.diff
cycle
This one is a product of collaboration between me and some other archers. Adds keybinding to add a way to move left and right through tags with the ability to pull the focused window with you. Like ctrl+alt or ctrl+alt+shift left and right in gnome.
cycle.c = http://github.com/simongmzlj/dwm/blob/master/cycle.c
tagmon
The only patch completely of my doing. Changes how dwm manages multiple monitors. Unless explicitly dragged across, this patch causes dwm to reapply the rules set for the window on the new monitor.
tagmon.diff = http://github.com/simongmzlj/dwm/blob/m … agmon.diff
gaps
This version of the patch, while still adding gaps on monocle - thats my preference - adds gaps around windows. Does not add a double width gap between adjacent windows.
gaps.diff = http://github.com/simongmzlj/dwm/blob/master/gaps.diff
Last edited by simongmzlj (2010-03-10 18:29:30)

erno wrote:anyone got nbalanced or nmaster working with pertag?
The issue is that the pertag patch moves the Monitor struct to just after the #include "config.h" line:
typedef struct Monitor Monitor;
typedef struct Client Client;
struct Client {
<snip>
/* configuration, allows nested code to access above variables */
#include "config.h"
struct Monitor {
char ltsymbol[16];
float mfact;
int num;
int by; /* bar geometry */
int mx, my, mw, mh; /* screen size */
int wx, wy, ww, wh; /* window area */
unsigned int seltags;
unsigned int sellt;
unsigned int tagset[2];
Bool showbar;
Bool topbar;
Client *clients;
Client *sel;
Client *stack;
Monitor *next;
Window barwin;
const Layout *lt[2];
int curtag;
int prevtag;
const Layout *lts[LENGTH(tags) + 1];
double mfacts[LENGTH(tags) + 1];
Bool showbars[LENGTH(tags) + 1];
It does this because the monitor structure now requires access the number of tags to function. This now precludes the ability of any code included in the config.h to use the Monitor struct as they see it as declared but undefined. My current solution is to split out a tags.h header with just the tags declared in them. Then this can be done like this
#include "tags.h"
struct Monitor {
char ltsymbol[16];
float mfact;
int num;
int by; /* bar geometry */
int mx, my, mw, mh; /* screen size */
int wx, wy, ww, wh; /* window area */
unsigned int seltags;
unsigned int sellt;
unsigned int tagset[2];
Bool showbar;
Bool topbar;
Client *clients;
Client *sel;
Client *stack;
Monitor *next;
Window barwin;
const Layout *lt[2];
int curtag;
int prevtag;
const Layout *lts[LENGTH(tags) + 1];
double mfacts[LENGTH(tags) + 1];
Bool showbars[LENGTH(tags) + 1];
/* configuration, allows nested code to access above variables */
#include "config.h"
and it all works. I'll post a version later tonight that allocates the length at runtime to avoid this circular dependency of files.
EDIT: Hows this? http://github.com/simongmzlj/dwm/blob/m … ertag.diff. I'm not sure if I should bother freeing those arrays seeing that they're constantly in use. Please test, if its okay I'll make pushing this one to the dwm website a priority as the on site one is broken.
Last edited by simongmzlj (2010-03-12 18:46:04)

Family share purchase request

When my daughter goes to the App Store and requests a purchase the alert comes to my iPad. How can I get it to also come to my phone?

I am having exactly this problem too. I approved 7 requests for songs as normal, and then for the next ones, every time I pressed "details" the box just disappeared. They are still in my notifications centre, but I cannot approve them. Please help!

Repeated Family Share Approval Request

My son made an in-app purchase approval request from his iPad mini. It occurred while I was on my MBP Retina, which simultaneously asked for approval and gave an error stating I was unable to approve. I approved the request, but now my son continues to be prompted to request approval. Any ideas how to get them to stop?

Thanks. I did not sign out but as I mentioned I did reset the password. Signing out deletes everything from the device so I held off. It turns out that these folks tried it last fall when it hapened to them and it didn't work:
https://discussions.apple.com/thread/6569354
It also happens that the same thing is happening on my imac, so it's probably not a hardware issue.

OUTCOME...CAPITAL ONE DECLINED EO 2ND REQUEST

‎**DECLINDED DUE TO ; RECENT CLI WAS IN MARCH....AND THE 3RD ACCOUNT WAS DECLINDED DUE TO "TOO MANY REVOLVING NEW ACCOUNTs"...Oh well...will try again in October. Just trying to bring up my score to a refinance auto loan w/credit union... ____07-20-2015 11:58 AM **HELLO ALL.I've decided to ask Captial One for another manual review. This first one was requested in March.
Since I got another CLI w/Overstock yesterday and my scores jumped 30 to 45 points...why not ask again?________
Sent March 2014...Denied...will let you guy know of the outcome...I've also opened a savings account with Cap1 a few months ago.____Hello,Well I've sent an email to the Executive office about 1 week ago. Well they called me back on both Cell and office phone.
I just go off the phone with a nice lady and she went into great detail about my email and my Credit Cards (3) with them.
As we went through all cards individually, I was asked the following info:1. Income
2. Employment
3. Informed of Soft Pull
4. How much I wanted and if I was willing to accept an amount that was less than what was requested.
5. Rent/Mortgage paymentShe kept thanking me through out the conversation and was informed that all three emails were sent to their underwriting department for review.
I can call her about 4-5 days of the pending outcome.... I will let you guys know...keep your fingers crossed... Cap1 Plat $1,100
Cap1 QS $750
Cap1 Sony $750
Cap1 Auto $16,000
Avant personal loan $2,100
Overstock $1,200
Khols $300
Von Maur $300 **UPDATE 7/2015
Cap1 Sony $2,000 (increase received)
First Savings Credit visa $500
Overstock $1,800 (increase received)
Von Maur $500 (increase received) Scores in March when email was sent 600/579/600 Now 635/618/645

I am glad you posted this - I'm sorry they said no, but this will help ease the perception that EO is a magic wand and you'll call them and get a CLI! Generally with Capital One it's 6 months between increases - EO or not. That's just their policy. There are exceptions but usually requesting before then is a waste of time.

2nd request, I updated and still hear the DROID MUSIC when I go on the internetrefox

I did the update as you requested and I still hear the weird music online whenever I go online, I figured out that the music I hear is the DROID logo music

See http://toolbar.inbox.com/faq.aspx?faqid=2876&faqmod=WST_Install
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Validation Looping - 2nd Request

Help!!!I am still trying different ways but it isn't working!
I have 8 fields where the rawvalue must be ge another field; if not, then setfocus back to that field. This works except when I tab to the next field then it goes into a looping cycle and I have to break the program in order to get out...
if (numShower.rawValue < showercapa.rawValue) { xfa.host.messageBox("Invalid Number Input","Warning","1");
xfa.host.setFocus(this);
It works if I setFocus to the next field..but I really want it to setFocus back to the field for correct figure.
Please help!

Yes, you can use a RequestDataValidator (implemented as a plugin and configured in the Request Dataset) to perform validation on a request. If in that code you throw a InvalidRequestDataException it will reject the request with an error displayed. See metalink artilce [ID 1317087.1].

How to Automatically Populate fields from Style no.--All data in XML- 2nd Request

To start with i am a noob in Livecycle, and zero knowledge in coding... I basically want to create 1 dropdown list (syle #) which shall automatically refer to xml and populate different fields (qtyperinner, buyer etc.) Here's my XML- <?xml version="1.0" encoding="utf-8" standalone="yes"?> <document> <row> 150833 <QtyPerMaster>24</QtyPerMaster> <QtyPerInner>6</QtyPerInner> <VolofMaster>0.039</VolofMaster> <Buyer>Fred Meyer</Buyer> </row> <row> 87102 <QtyPerMaster>24</QtyPerMaster> <QtyPerInner>4</QtyPerInner> <VolofMaster>0.034</VolofMaster> <Buyer>Fred Meyer</Buyer> </row> <row> 821011 <QtyPerMaster>50</QtyPerMaster> <QtyPerInner>50</QtyPerInner> <VolofMaster>0.053</VolofMaster> <Buyer>Insource</Buyer> </row> <row> 110609 <QtyPerMaster>12</QtyPerMaster> <QtyPerInner>2</QtyPerInner> <VolofMaster>0.022</VolofMaster> <Buyer>Indigo</Buyer> </row> <row> 110608 <QtyPerMaster>24</QtyPerMaster> <QtyPerInner>6</QtyPerInner> <VolofMaster>0.024</VolofMaster> <Buyer>Indigo</Buyer> </row> <row> 150785 <QtyPerMaster>12</QtyPerMaster> <QtyPerInner>2</QtyPerInner> <VolofMaster>0.055</VolofMaster> <Buyer>Pier 1</Buyer> </row> </document> _______________________________________________________ Have already managed to create dropdown with style number...and it works!! (and have connected the XML with form properties as well as data binding) please advice how to link/bind style # field with the rest of the text boxes to generate data underneath that particular style number from the XML. it could very well be possible that my XML is written wrong (without heirachy or something)...if so also advice how that needs to be with an example...kindly make sure to advice in great detail as i would'nt understand otherwise. Question 2:- Based on the "style #" selection i want an image to be populated from C: (it should search the whole drive to find filename/style number) Please advice. Lastly i have already looked at the Purchase Order sample PDF which came with LiveCycle..and it doesnt seem to be of much help. Thanks in Advance- AK Dolven

Hi Judy,
I think you need to programatically set the layout and copies options for your XML publisher concurrent program using FND_REQUEST.ADD_LAYOUT before calling FND_REQUEST.SUBMIT_REQUEST.
Thanks
Shailendra

Urgent 2nd request CS6 photoshop not found after downloading and putting in valid serial #

CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only?? only the CS6 PS extended version shows up as downloaded.
I have no idea how this forum works or weather or not this has been posted let alone answered. Can someone from Adobe please help me asap
Thanks!

check your duplicate post. there are two responses.

2nd Request - PCI Memory Controller for ThinkPad T500 2081-CTO OS Vista 64bit

Evidently the PCI Memory Controller driver is not installed on my ThinkPad T500 2081-CTO OS Vista 64bit and shows up as an error when running the Lenovo System Tool Box.
Searching this forum I found one psot as follows BUT thisis for a T-200 laptop.
Re: Driver for PCI Memory Controller
Options
‎02-25-2009 06:59 AM
You need the driver for Intel Turbo Memory. Only Windows Vista can use Turbo Memory, so we only have a Vista version for the driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67820
Is this driver appropriate?
Do I need the PCI Memory Controller driver .. and if so where do I find it for my laptop?
Thanks.
Solved!
Go to Solution.

I would suggest that you forget about turbo memory. Intel quit talking about it and they have not released a driver since 2009. That is 2 years before service pack 1 was released. I ran tests and I was never able to measure any improvement with a card installed. As far as I am concerned, it is just something else to break and interfere with other components.,

Help! 2nd Request

Randomly, iTunes is loosing my podcast downloads. Started happening 2 upgrades ago. Daily, some of my podcasts are lost by iTunes and I get the error "...Origional file could not be found".
When the podcast is downloaded, it goes into a temporary directory (for example) C:\Documents and Settings\User Name\My Documents\My iTunes\Downloads\Podcasts\Dirty Jobs_Alligators and Sugarcain.tmp\download.mp3
At this point, I CAN play the podcast. However, when I shutdown iTunes and then restart it later; the "origional file can not be found" error comes up.
The file should be moved to a directory similar to this (C:\Documents and Settings\User Name\My Documents\My iTunes\Podcasts\Discovery Channel Features\Dirty Jobs_Alligators and Sugarcain.mp3), but it is not...the temporary file is simply deleted.
Doesn't happen for each podcast. Seems to be no ryme nor reason as to which one(s) get lost. Happens on a regular (daily) basis. I'm loosing cool content.
HELP!
Greg

This board is as worthless as the lates release of iTunes. Not to mention the IPod that has started giving me erratic disk errors. I wish I had stuck with a Microsoft product...at least then I would have received some help on their boards. Of course converting my music to a non-protected format that Media playerr can use will be a huge pain.

Not recieving emails to verify email address for sync (2nd request)

Anybody out there can help me? Please
not getting verification email
I am unable to get verification emails for sync. I check security and Mozilla Firefox is allowed. I have the latest version and I need help. I want sync to migrate my Firefox bookmarks to a new computer. Help will be appreciated. Just to let you know, I did get an email from Firefox for a survey. If that worked, why can't get the verification email for sync?

The email would be from <[email protected]> could this be in the spam filter or a blocked address?
If not, please delete the newly created account and sign up one more time after clearing the cache.

How to pass 1st program request id to 2nd program in request set

Hi,
I have following requirement, kindly help.
I registered report as concurrent program1. After running the report, i have to email the output. For that i prepared a shell script and registered that as concurrent program 2.
I put concurrent program1 and 2 in request set, i want to pass the request id of concurrent prog1 to concurrent prog2.
Is there anyway i can achieve this.
If not possible, suggest me alternative way.
Thanks.

Here is a not so sophisticated approach.
First find the concurrent_program_id for your Outbound Interface from fnd_concurrent_programs_tl.
Say it is 12345
Then, in your 2nd program, find the id as follows
select fcr.request_id outbound_request_id
/*, fcr2.request_id,fcr3.request_id,fcr4.request_id,fcr5.request_id*/
from fnd_concurrent_requests fcr --2nd request
,fnd_concurrent_requests fcr2 -- 2nd request phase
--,fnd_concurrent_requests fcr3 -- request set
,fnd_concurrent_requests fcr4 -- request phase for outbound api
,fnd_concurrent_requests fcr5 -- outboudn api request
where fcr.request_id = fnd_global.conc_request_id
and fcr.parent_request_id = fcr2.request_id
--and fcr2.parent_request_id = fcr3.request_id
--and fcr4.parent_request_id = fcr3.request_id
and fcr2.parent_request_id = fcr4.parent_request_id
and fcr4.request_id = fcr5.parent_request_id
and fcr5.request_id != fcr.request_id
and fcr.concurrent_program_id = 12345Hope this helps,
Sandeep Gandhi

Share 2nd REQUEST

Similar Messages

Maybe you are looking for