SharedObjects environment value not updating properly in clustered environment

Hi All,
I have clustered UCM having two nodes. I have custom scheduler running every 5 minutes which updates some value in SharedObjects environment. I am using following code:
SharedObjects.putEnvironmentValue("param", "val");
the problem is that this value is updated only in one node. If Node1 picks up the scheduler job, then the value is updated only on Node1.
Next time when Node2 picks up the scheduler job, Node2 does have have updated value and my application fails.
Any idea why it is happening. How can I fix this issue?
Thanks

Hi All,
I have clustered UCM having two nodes. I have custom scheduler running every 5 minutes which updates some value in SharedObjects environment. I am using following code:
SharedObjects.putEnvironmentValue("param", "val");
the problem is that this value is updated only in one node. If Node1 picks up the scheduler job, then the value is updated only on Node1.
Next time when Node2 picks up the scheduler job, Node2 does have have updated value and my application fails.
Any idea why it is happening. How can I fix this issue?
Thanks

Similar Messages

  • Contract value not updated in open order value of credit management

    My requirement is i have created the contract and activated the credit management by assigning credit  group to contract document type, In item category the credit is active and in pricing subtotal is also assigned .
    But when i create the contract , the open order value is not updated .
    i do not want the credit to be active at order level.
    Dear guru's
    please let me know where i am going wrong
    thanks in advance

    hi,
    open sales orders value not updating currectly in sales value of CM
    http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditmangementIn+SD-FI
    i think you have to run a report which is under the link number 1.
    regards,
    balajia

  • Statistic condition values not updated during Sales order Settlement

    Hi,
    In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
    We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
    For this purpose we have created one COPA Assessment Cycle.  Tracing factor is Sales Revenue and receiver is Materials.
    In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
    For this reason we have created one new statistic condition type,  what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
    Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
    So is it possible update during sales order settlement time statistic condition values.
    Please give me suggestion.
    Regards,
    Thiru

    Hi Ajay Sir,
    As you said is correct.
    But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field.  System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
    Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
    Please suggest me is there any alternative.
    Regards,
    Thirumalesh .

  • Shockwave will not update properly

    Hi. I have a laptop running Windows 7 Home premium, 64 bit system.I  use IE and just installed Firefox, as well. I tried to update Shockwave so I could continue to play my UClick jigsaw puzzle game, and my computer says it installed successfully, but it will not work with my jigsaw puzzle. I have uninstalled it and tried to reinstall it, but no change in response. When I try to open jigsaw puzzle, the Adobe Shockwave loading graphic appears, but nothing happens.
    Help!

    I understand the two sites are using different plugins/players.  I'm not an idiot.  However as Shockwave for Director is so old it's listed by Firefox as an unknown plugin and described as being a Netscape plugin ("Adobe Shockwave for Director Netscape plug-in, version 12.1.5.155"), I am merely suggesting that UClick might change to a more recent, robust plugin.
         From: SeanWilson <[email protected]>
    To: RB Jones <[email protected]>
    Sent: Sunday, March 8, 2015 2:34 PM
    Subject:  Shockwave will not update properly
    Shockwave will not update properly
    created by SeanWilson in Adobe Shockwave Player - View the full discussionThose two sites use 2 completely different plugins/players to view their content — one being Shockwave for Director, the other being Flash so "just changing the call" won't work. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7265858#7265858 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7265858#7265858 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Shockwave Player by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.

    Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.
    i might need walked through on a few things if they are too complicated.

    Have you:
    - Restore from backup. See:                                                
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.            
    If a PC
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Subscription value not updated despite payment made days ago

    Please help this is frustrating have been waiting for 3 days now payments have been made but subscription value not updated on skype account 

    Hello and welcome to the Skype Community.
    You have totally different issues. ALWAYS start your own topic please.
    1.0. Philippines Subscription.
    Your account shows that you have used your full minutes allocation in your current billing cycle and your next minutes will be added to your account when your next billing cycle starts on July 17th 2015.
    Renewing your monthly Subscription before your billing cycle ends has no effect on the date upon which your minutes allocation will be added to your account.
    To continue calling until your next minutes allocation is applied to your account please purchase either a Subscription but with a different amount of minutes or Skype Credit.
    2.0. Your account shows that you are calling a cellphone in Austria. Please note that only calls to landlines in Austria are included in the Unlimited World Subscription.

  • Array of clusters does not updates properly

    Hello...
    I builded a VI to split a series of 10000 values in many segments, each one overlapped by 50 %. The product of all the values of each segment is calculated and by means of visual inspection and Led selection (green means that the segment will be used, red means that the segment will not be used), I can select which segment will be used for the final sum. For example: if I have 20 segments, but only segments 4, 8, 15 are green, only the products of the segments 4, 8 and 15 will be summed to generate the final result. The final result should be refreshed if the Lenght of the Segment is changed or if any Led is switched to green or red, but the update does not occur properly. Sometimes all the segments are showed properly but if I change one Led or the Lenght of Segment control, the given result is wrong. When the Lenght of Segments control is changed, all the Leds need to be adjusted to green state.
    I don't know where is the problem in my code, but I think that is something related to the cluster constant that is wired to the first Unbundle by name, since that this constant was created from the cluster before it was inserted into array, and not from the array. If I create the constant from the array, the code returns an error.
    To avoid race conditions I used flat sequence.
    Thanks in advance for attention and help.
    Dan07
    Message Edited by dan07 on 07-26-2008 08:31 AM
    Attachments:
    Array of clusters.vi ‏43 KB

    I spotted one problemous area:
    Where you have an uninitialized shift register, so for every event the value of the last iteration is used.
    What's the meaning of this piece of code?
    I think you devide the length of the array by half the length of the segment?
    Ton
    Message Edited by TonP on 07-26-2008 05:34 PM
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!
    Attachments:
    Array of clusters_BD.png ‏2 KB
    Array of clusters_BD2.png ‏1 KB

  • Jms is not working properly in clustered environment

    Hi all,
    i am using the application server oc4j 10.1.3.1.0 enterprise edition . my application is standalone application(thick client)
    we are using the jndi.properties as follows ...
    java.naming.factory.initial=com.evermind.server.rmi.RMIInitialContextFactory
    java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security,opmn:ormi://172.16.1.38:6006:deceval_group/Security
    java.naming.security.principal=oc4juser
    java.naming.security.credentials=oc4juser
    oracle.j2ee.rmi.loadBalance=lookup
    we have two application servers in cluster topology as u can see above we have used one instance from one application server and one from another.
    i have seen that for every instance there one jms server. at runtime it is taking one application servers services
    say opmn port 6005 but when the application is connecting to the another application server say opmn 6006
    here jms is not working properly when i send message
    As we have clustered environment message must be propagated all the applications who use above jndi.properties.
    if i keep use only one application server opmn say
    java.naming.provider.url=opmn:ormi://172.16.1.38:6005:group/Security
    then its is working excellently
    please can u provide any solution ASAP
    thanks in advance
    Manu

    Dear Aravindth
      (.*?) means -> Select all contents from where you start and end,
    For Ex. <month>(.*?)</month> then Select for start <month> and end last </month> tag.
    (?) Match zero or one occurrences. Equivalent to {0,1}.
    (*) Match zero or more occurrences. Equivalent to {0,}.
    (+) Match one or more occurrences. Equivalent to {1,}.
    (.) (Dot). Match any character except newline or another Unicode line terminator.
    (.*?) means -> Zero or more times Match any character except newline or another Unicode line terminator + Match zero or more occurrences. Equivalent to {0,}.+Match zero or one occurrences. Equivalent to {0,1}.
    Could you please refere the below cite :
    http://www.javascriptkit.com/jsref/regexp.shtml
    Thanks & Regards
    T.R.Harihara SudhaN

  • Pick List Value Not Working Properly

    Hi Oracle Framework Gurus,
    I have a strange Issue in which one of my cusom page is working properly in Jdev and not working Properly when deployed in the apps instance.
    There are two custom pages with the same VO.
    What I do is have a picklist from one of the custom page and depending on the value of the picklist and I navigate to the other custom page.
    This is working properly in the JDev,But for some reasons it works properly in apps instance, when I try to run the first time(ie) when I run page A and pick 'X' from the picklist the Page 'B' is coming properly as per the controller code and when i pick 'Y' from the picklist in Page B, it is navigating to Page A as per the controller code.
    This works fine for the first time,But when i again select 'X' from the picklist the proper value from the Picklist is not getting selected and passed to the custom package and so I get wrong values in Page 'B'
    What could be the reason for it as it working fine in Jdev,I can navigate from Page A to Page B and Page B to Page A as many times possible.

    Hi Anand,
    Controller1 :
    public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    //int intPersonId = pageContext.getEmployeeId();
    int intPersonId; // = pageContext.getEmployeeId();
    String strPersonId = Integer.toString(277671);
    //String strPersonId = Integer.toString(intPersonId);
    java.util.Date sysdate = pageContext.getCurrentUserDate();
    String convSysDate = pageContext.getOANLSServices().dateToString(sysdate);
    // Date testdate = (Date)sysdate.dateValue();
    // get the Application Module
    OAApplicationModule oaAM = pageContext.getApplicationModule(webBean);
    Serializable parameters[] = { strPersonId,convSysDate };
    Serializable param[] = { strPersonId };
    System.out.println("The Sysdate PF "+convSysDate);
    //pass parameters to Application Module
    oaAM.invokeMethod("insertLovRow", param);
    if ((String)pageContext.getSessionValue("PFlag1") != null)
    String PFlag1 =(String)pageContext.getSessionValue("PFlag1");
    String SDate1 =(String)pageContext.getSessionValue("SDateSession1");
    Serializable param1[] = { SDate1 };
    oaAM.invokeMethod("insertLovRow", param);
    oaAM.invokeMethod("initEmpLovQuery1",param1);
    oaAM.invokeMethod("initEmpTransLovQuery1");
    OAMessageChoiceBean orgMesgChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("Year");
    orgMesgChoiceBean.setPickListViewObjectDefinitionName("EmployeeTest.oracle.apps.per.server.EmpTransDateLov");
    orgMesgChoiceBean.setListValueAttribute("StartDate");
    orgMesgChoiceBean.setListDisplayAttribute("DateRange" );
    orgMesgChoiceBean.setPickListCacheEnabled(false);
    else
    oaAM.invokeMethod("insertRow", parameters);
    oaAM.invokeMethod("initQuery", param);
    oaAM.invokeMethod("execQuery");
    oaAM.invokeMethod("totexecQuery");
    OAMessageChoiceBean orgMesgChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("Year");
    orgMesgChoiceBean.setPickListViewObjectDefinitionName("EmployeeTest.oracle.apps.per.server.EmployeeDateLovVO");
    orgMesgChoiceBean.setListValueAttribute("StartDate");
    orgMesgChoiceBean.setListDisplayAttribute("DateRange" );
    orgMesgChoiceBean.setPickListCacheEnabled(false);
    oaAM.invokeMethod("initEmpLovQuery");
    OAViewObject oaviewobject1 =(OAViewObject)oaAM.findViewObject("EmployeeUtilVO1");
    oaviewobject1.reset();
    if (oaviewobject1 != null)
    do
    if(!oaviewobject1.hasNext())
    break;
    oaviewobject1.next();
    OARow row = (OARow)oaviewobject1.getCurrentRow();
    String fullName = (String)row.getAttribute("EmpDep");
    System.out.println("The Name is "+fullName);
    } while(true);
    * Procedure to handle form submissions for form elements in
    * a region.
    * @param pageContext the current OA page context
    * @param webBean the web bean corresponding to the region
    public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
    //int intPersonId = pageContext.getEmployeeId();
    //String strPersonId = Integer.toString(intPersonId);
    int intPersonId; // = pageContext.getEmployeeId();
    String strPersonId = Integer.toString(277671);
    OAApplicationModule oaAM = pageContext.getApplicationModule(webBean);
    if (pageContext.getParameter("ViewDetails") != null)
    pageContext.putSessionValue("strPersonId", strPersonId);
    pageContext.setForwardURL("OA.jsp?page=/EmployeeTest/oracle/apps/per/webui/EmployeePanelIB",
    null,
    OAWebBeanConstants.KEEP_MENU_CONTEXT,
    null,
    null,
    true, // Retain AM
    OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // Show breadcrumbs
    OAWebBeanConstants.IGNORE_MESSAGES);
    System.out.println("strPersonId "+strPersonId);
    String strEvent= pageContext.getParameter(EVENT_PARAM) ;
    if ( strEvent.equals("update"))
    OAMessageChoiceBean DepStatus1 = (OAMessageChoiceBean) webBean.findIndexedChildRecursive("Year");
    String sDate = DepStatus1.getSelectionValue(pageContext);
    //String sDate = DepStatus1.getValue(pageContext).toString();
    //Serializable parameters[] = { strPersonId,sDate };
    Serializable parameters[] = { strPersonId,sDate };
    Serializable param[] = { strPersonId };
    System.out.println("The PersonId "+strPersonId);
    System.out.println("The Controller Date passed is IBUtil "+sDate);
    oaAM.invokeMethod("insertRow", parameters);
    oaAM.invokeMethod("initQuery", param);
    oaAM.invokeMethod("execQuery");
    String flag = "1";
    //pageContext.putSessionValue("strPersonId", strPersonId);
    pageContext.putSessionValue("PFlag", flag);
    pageContext.putSessionValue("SDateSession", sDate);
    pageContext.setForwardURL("OA.jsp?page=/EmployeeTest/oracle/apps/per/webui/EmpTestPG",
    null,
    OAWebBeanConstants.KEEP_MENU_CONTEXT,
    null,
    null,
    true, // Retain AM
    OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // Show breadcrumbs
    OAWebBeanConstants.IGNORE_MESSAGES);
    Controller 2:
    public void processRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processRequest(pageContext, webBean);
    //int intPersonId = pageContext.getEmployeeId();
    int intPersonId; // = pageContext.getEmployeeId();
    String strPersonId = Integer.toString(277671);
    //String strPersonId = Integer.toString(intPersonId);
    java.util.Date sysdate = pageContext.getCurrentUserDate();
    String convSysDate = pageContext.getOANLSServices().dateToString(sysdate);
    // get the Application Module
    OAApplicationModule oaAM = pageContext.getApplicationModule(webBean);
    Serializable parameters[] = { strPersonId,convSysDate };
    Serializable param[] = { strPersonId };
    System.out.println("The Sysdate PF "+convSysDate);
    //pass parameters to Application Module
    oaAM.invokeMethod("insertLovRow", param);
    if ((String)pageContext.getSessionValue("PFlag") != null)
    String PFlag1 =(String)pageContext.getSessionValue("PFlag");
    String SDate1 =(String)pageContext.getSessionValue("SDateSession");
    Serializable param2[] = { strPersonId, SDate1 };
    Serializable param1[] = { SDate1 };
    oaAM.invokeMethod("insertLovRow", param);
    oaAM.invokeMethod("initEmpLovQuery1",param1);
    oaAM.invokeMethod("initEmpTransLovQuery1");
    OAMessageChoiceBean orgMesgChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("Year");
    orgMesgChoiceBean.setPickListViewObjectDefinitionName("EmployeeTest.oracle.apps.per.server.EmpTransDateLov");
    orgMesgChoiceBean.setListValueAttribute("StartDate");
    orgMesgChoiceBean.setListDisplayAttribute("DateRange" );
    orgMesgChoiceBean.setPickListCacheEnabled(false);
    else
    oaAM.invokeMethod("insertRow", parameters);
    oaAM.invokeMethod("initQuery", param);
    oaAM.invokeMethod("execQuery");
    oaAM.invokeMethod("totexecQuery");
    OAMessageChoiceBean orgMesgChoiceBean = (OAMessageChoiceBean)webBean.findChildRecursive("Year");
    orgMesgChoiceBean.setPickListViewObjectDefinitionName("EmployeeTest.oracle.apps.per.server.EmployeeDateLovVO");
    orgMesgChoiceBean.setListValueAttribute("StartDate");
    orgMesgChoiceBean.setListDisplayAttribute("DateRange" );
    orgMesgChoiceBean.setPickListCacheEnabled(false);
    oaAM.invokeMethod("initEmpLovQuery");
    OAViewObject oaviewobject1 =(OAViewObject)oaAM.findViewObject("EmployeeUtilVO1");
    oaviewobject1.reset();
    if (oaviewobject1 != null)
    do
    if(!oaviewobject1.hasNext())
    break;
    oaviewobject1.next();
    OARow row = (OARow)oaviewobject1.getCurrentRow();
    String fullName = (String)row.getAttribute("EmpDep");
    System.out.println("The Name is "+fullName);
    } while(true);
    * Procedure to handle form submissions for form elements in
    * a region.
    * @param pageContext the current OA page context
    * @param webBean the web bean corresponding to the region
    public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
    super.processFormRequest(pageContext, webBean);
    OAApplicationModule oaAM = pageContext.getApplicationModule(webBean);
    //int intPersonId = pageContext.getEmployeeId();
    //String strPersonId = Integer.toString(intPersonId);
    int intPersonId; // = pageContext.getEmployeeId();
    String strPersonId = Integer.toString(277671);
    if (pageContext.getParameter("ViewDetails") != null)
    pageContext.setForwardURL("OA.jsp?page=/EmployeeTest/oracle/apps/per/webui/EmpPanelPG",
    null,
    OAWebBeanConstants.KEEP_MENU_CONTEXT,
    null,
    null,
    true, // Retain AM
    OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // Show breadcrumbs
    OAWebBeanConstants.IGNORE_MESSAGES);
    pageContext.putSessionValue("strPersonId", strPersonId);
    String strEvent= pageContext.getParameter(EVENT_PARAM) ;
    if ( strEvent.equals("update"))
    OAMessageChoiceBean DepStatus1 = (OAMessageChoiceBean) webBean.findIndexedChildRecursive("Year");
    String sDate = DepStatus1.getSelectionValue(pageContext);
    //String sDate = DepStatus1.getValue(pageContext).toString();
    Serializable parameters[] = { strPersonId,sDate };
    Serializable param[] = { strPersonId };
    System.out.println("The Controller Date passed is CBUtil "+sDate);
    System.out.println("The PersonId "+strPersonId);
    oaAM.invokeMethod("insertRow", parameters);
    oaAM.invokeMethod("initQuery", param);
    oaAM.invokeMethod("execQuery");
    String flag = "2";
    //pageContext.putSessionValue("strPersonId", strPersonId);
    pageContext.putSessionValue("PFlag1", flag);
    pageContext.putSessionValue("SDateSession1", sDate);
    pageContext.setForwardURL("OA.jsp?page=/EmployeeTest/oracle/apps/per/webui/EmpIBUtilPG",
    null,
    OAWebBeanConstants.KEEP_MENU_CONTEXT,
    null,
    null,
    true, // Retain AM
    OAWebBeanConstants.ADD_BREAD_CRUMB_YES, // Show breadcrumbs
    OAWebBeanConstants.IGNORE_MESSAGES);
    Hi Above two are the controller codes forget the rest of the codes,Concentrate on the PFR code, Just want to know what I am doing is correct or not.
    First time when I select the Picklist value,the value gets passed as a parameter to the custom package and the page gets displayed properly and vice versa,But I am not able to do the same cycle again for some reasons.
    Please get back to me ASAP.
    Regards,
    Magesh.M.K.
    Edited by: user1393742 on Oct 19, 2010 11:58 PM

  • Letter of Guarantee Value not Updating with Payments

    Dear Expert
    The requirement from the user is that when a payment is made , the system should deduct the amount paid and refresh the new available value for the customer.
    For Example : A Financial document is created with 1000 value . And Sales order created for 8000 . Therefore now the open value is 2000. This means that the customer can order goods worth 2000 only.
    In the meanwhile the first order is delivered and billed . And the customer has paid 8000 when he received the bill. this means that now he has paid so he can now order more goods worth 8000.
    but in the system it still shows open value as 2000 , although now that the customer has paid, it should be updated with the payments made so the value can be used by the customer that he had paid.
    If any of you has any idea how to tackle this ( it works same way in credit management ) but not in financial documents.
    we were thinking of another work around , i.e by closing the Financial document that has been paid and creating a new one by adding the remaining balance. i.e 2000+ 8000 , this way the customer can again use his value. but then how can we automate the system to alert the sales user that the payment has been made for a certain invoice for a certain LG.
    your idea's and suggestion are highly welcome
    Best regards,

    Dear ATGSD,
    The functionality in GTS is designed for modelling of a single financial document for which the initial value is not updated.
    I understand your user's requirement, but surely that is dealt with simply by setting a credit limit in the SAP ERP system?  There should be no need to use the GTS functionality at all.  In the ERP system, the credit limit is updated by the account payments, exactly as your user requires.
    Please let us know if that would work, or if there are more detailed requirements that are not apparent from your post - thanks.
    Regards,
    Dave

  • Excise base value not updated

    Dear all,
    We have found that excise base value is not updated after creating excise invoices,later we corrected it,
    excise base value started updating in table J_1IEXCDTL,
    Intially for 2 months excise base value is not updated in table,
    Is there any problem will arise in future ?
    or
    How to solve this issue ?
    Jeyakanthan

    Awaiting valuable replies.....
    Edited by: Jeyakanthan A on Mar 6, 2010 5:36 PM

  • HT1923 Trouble with newest version of iTunes not updating properly

    I tried updating to the newest version of iTunes because I received the Apple Software Update for it.  It wouldn't install properly, so I manually installed the newest version.  When I tried to open iTunes I received an error message: "APSDaemon.exe - System Error; MSVCR80.dll not found, try reinstalling the software".  So I clicked okay and received an error message the iTunes was not installed properly, try reinstalling.  Then I uninstalled iTunes and reinstalled it, but received the same error messages about 2/3 of the way through reinstalling.  Now iTunes won't install at all.  I went to the support page and got the instructions for removing and reinstalling iTunes on Windows 7, but I can't finish the removing steps because Apple Mobile Device Support will not uninstall at all.  My husband is having the same issue on his computer.  Is this a known issue with the new version of iTunes for windows?  How do we fix it now?  We really need iTunes on the computers to sync with our phones, iPod, and iPad.  Any help would be appreciated...should I contact apple support directly?

    Update - I was able to finally uninstall the Apple Mobile Device Support component and the rest of the components. I was not able to delete the common files/Apple folder when checking to make sure all the components were removed; however, I think that is because I have an Apple AirPort WiFi Device.  Anyway, the newest version of iTunes did install on my computer after following these instructions. So I believe my issue is resolved. We will see...

  • Automatic Product Selection item value not updated in S067

    Hello,
    We have a requirement for Automatic product selection based on ATP with pricing at item level. This is working fine.
    But the value of the subitem is not updated in open delivery value S067 after saving the delivery.
    The item category is marked as credit active. update group is 15.
    If i do main item pricing then the value is getting updated successfully.
    I check several notes but nothing helped.
    Pls. help.
    Regards,
    Praveen

    assigned it in sales order at item level in Billing tab
    Assign the same at header level billing tab in sale order.
    thanks
    G. Lakshmipathi

  • Purchase Order History not updated properly

    Hi All,
    The Purchase Order History is not updated correct.
    Scenario:
    The  Invoice is created ( MIRO) with Amount : 1001 USD but in PO History it displays 1000 USD.
    The Tolerance is 1 USD ...My Requirement is that it should display 1001 in PO History.
    Thanks and Regards
    Mahesh

    The Actual Bill Value is 1001 USD.

  • Open order value not updated in F.35

    Hi
    While using item category Tas ( Third party item ) in Sale order, it is not updated in open order value at F.35.
    please give your suggestions. thanks.
    Regards,
    Tirumal.R

    1/ Check your credit control area settings
    2/ Check your sales order config, if it works for one sales order type and not the other compare the two/

Maybe you are looking for