SharePoint Error when importing web: Requested value 'PublishingPages' was not found

I tried to import a publishing web using the following powershell command:
Import-SPWeb http://****/test -Path E:\data.cmp -UpdateVersions Overwrite
However, it returns an error:
Import-SPWeb : Requested value 'PublishingPages' was not found. At line:1 char:1 + Import-SPWeb http://****/test -Path E:\data.cmp -Update ... + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + CategoryInfo : InvalidData:
(Microsoft.Share...CmdletImportWeb: SPCmdletImportWeb) [Import-SPWeb], ArgumentException + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletImportWeb
Please help me to address this as it took me all day long to find the root cause.
Thanks

Hi Thang,
Without knowing much of what you are trying to do here like whether or not you are trying to promote/ demote a publishing site; I wanted to let you know about this limitation: 
"For site collections that make use of the publishing feature it is not supported to migrate
root sites into sub sites or sub sites into root sites."
See the below blog post for details. Hope this helps!
http://blogs.technet.com/b/stefan_gossner/archive/2009/05/27/limitations-of-stsadm-o-export-import-related-to-publishing-sites.aspx
BlueSky2010
Please help and appreciate others by using forum features: "Propose As Answer", "Vote As Helpful" and
"Mark As Answer"

Similar Messages

  • Microsoft Exchange Critical Error: Requested Value 'TeamMailbox' was not found.

    Hi
    Microsoft Online Services Tech Center Team,
    Did anyone can help me on this error and found a solution?
    Background:
    We have successfully deployed (I think) a Office 365 hybrid configuration, we can migrate users from on premise to cloud O365 and back. But, every
    time we opened the EMC on our Exchange 2010 upgraded to SP 3, this error message pops out.
    <o:p></o:p>
    <o:p></o:p>
    This happens when we open the EMC >> Microsoft Exchange >> O365 >> Recipient configuration.
    Hope somebody can help us.
    Thanks.
    Mark Josef
    Mark Josef

    We are having the same problem and would like to find a fix - only does it when clicking on our O365 Online Recipient Configuration section on our Hybrid exchange server management console.
    Not sure if this is part of our intermittent issues with migrating users to O365 through management console or not but I don't like errors coming up anywhere - want to fix it!  <Bump>

  • UI error "The requested lookup key was not found in any active" workaround

    Hi All.
    Some of you might have this problem when making a UI-Connection "The requested lookup key was not found in any active activation context"
    Talking to SAP Support and Gianluigi Bagnoli about the problem here is a sum of the problem and the workaround to prevent it (at least untill SAP development fix the problem)
    Some facts:
    - The error is present in SBO2005A SP01 and SBO2005B SP00, SBO2007A should not be affected
    - The error occur because the SAP client fail to provide the correct/entire connection-string
    - The problem is actually an underlying problem from Microsoft (try searching google with the error message)
    - Normally after the error occur, you can go to Administration > Add-ons and start the add-on manually without problems
    Some additional observations
    - The error mostly happen just after startup of a windows machine
    - We have had a couple of customers that have had the problem, then upgraded the SAP client to a new patchlevel and got rid of the problem (but we have also had customers where this did not help)
    - Seem to be happening more often of slower machines
    Workaround
    Knowing that this problem is tied to and incorrect connection string is also the "workaround"... What you could do is to create exception handling around the UI connection, and if it fails connection using the development connection string (like you do during development) The connection string is: 0030002C0030002C00530041005000420044005F00440061007400650076002C0050004
    Using this method, you will be able to establish a connection even if the client is unable to provide you a correct connectionstring, but the draw-back of this workaround is that the add-on will be indicated as failed in the Add-on Manager and the user is not able to stop the add-on in any way other than disconnection from the company.

    Hi,
    I am looking for a solution to the error "The requested lookup key was not found in any active activation context" too.
    In our add-on we do two SboGuiApi.Connect(sConnectionString), one from MyAddon.exe and the other one from MyAddon.dll. The .exe catches messages and .dll interacts with UI to paint forms etc. It is since the .exe and .dll are not in the same thread. The first connection works fine in the .exe, then that connection string is passed to the dll and the error is raised. The rare thing is why it works fine from the development enviroment, but doesn't work when SAP is starting the Addon?
    Is it possible connect twice?
    Can we connect in the .exe using the connection string received from SAP and in the .dll using the development connection string?
    It is over
    Windows XP 2002 SP2
    SBO2007A patchlevel 15
    VS 2005 C#
    SQL Server 2005
    Thank you

  • When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

    When I try to launch itunes I get an error mesage saying that Apple application support was not found and suggests that I uninstall and re-install it, but that doesn't work

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    Start with the section Install missing components which should address your particular error. Otherwise the steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    tt2

  • Profile Manager - Not Found  The requested URL /wiki was not found on this server.

    I have installed Lion Server with Web and Profile Manager services. When I log into the profile manager web page I receive the message "Not Found  The requested URL /wiki was not found on this server."  I followed the guide here for install http://krypted.com/iphone/setting-up-profile-manager-in-lion-server/.

    This was the fixed I found
    Fixing profile manager has been solved by someone else:
    1.  Turn off all services under Server app.
    2.  Under Hardware, settings, change SSL certificate to "none"
    3.  Under Hardware, network, reset host name again.
    4.  Under Hardware, settings, change SSL certificate back to correct one
    5.  Turn Web service ON.
    It may still say /var/empty.
    6.  Turn Wiki service ON
    7.  Recheck Web service.  It should be changed to /Library/Server/Web/Data/Sites/Default.

  • The requested URL /mahjongtrails/ was not found on this server.

    Not Found
    The requested URL /mahjongtrails/ was not found on this server.
    Apache/2.2.9 (Debian) mod_jk/1.2.26 PHP/5.2.6-1+lenny4 with Suhosin-Patch mod_python/3.3.1 Python/2.5.2 mod_ruby/1.2.6 Ruby/1.8.7(2008-08-11) mod_ssl/2.2.9 OpenSSL/0.9.8g Server at megazebra-facebook-trails.mega-zebra.com Port 80

    Adding to it,
    First thing need to modify the server.xml and default-web-site.xml file as mentioned . Even after it doesn't work check for the security settings in the browser.
    For IE, Goto Tools-> Internet Options -> Security tab -> Custom level.
    Try enabling the security settings.

  • Error when using API.DataWindow.Utilities.mShellAndWait: File not found

    I am trying to run a simple command using API.DataWindow.Utilities.mShellAndWait, however I am experiencing the following error in FDM web. Strangely, I do not see the same error when the command is run from FDM Workbench:
    Error: File not found
    At Line: ###
    The command is as follows:
    Dim strCMD
    strCMD = "ECHO %DATE% %TIME% >> \\<servername>\<folder1>\<folder2>\File.Log"
    API.DataWindow.Utilities.mShellAndWait strCMD, 0
    This command works fine when run directly from the command line. I am using a UNC path so thought this would have worked. Can anyone please suggest how I can resolve this? I have also tried the following and this results in a similar error:
    Dim strCMD
    strCMD = "ECHO %DATE% %TIME% >> \\<servername>\<folder1>\<folder2>\File.Log"
    Set WshShell = CreateObject("WScript.Shell")
    Set WshShellExec = WshShell.Exec(strCMD)
    Error: The system cannot find the file specified.

    I would expect the issue is due to user access priviledges.
    When you run it through Workbench, the shell and wait is using your (logged on user's) credentials.
    When it operates through the web stie, it is using the service account credentials.
    If the service account does not have permissions, that could explain the 'file not found', though I would expect an access is denied error.
    $.02

  • What does it mean when it says "Apple Application Support was not found"

    Ok. I uninstalled everything that was related to itunes because it wouldn't let me connect my ipod to itunes. a few days ago I think I uninstalled something that I needed because now I can't even open itunes. It keeps saying "apple application support was not found" when I try to open the program. And it says :"Error 2 (Windows error 2)" I've tried to download everything. itunes 64-bit, 32-bit, update, latest version, and something else I believe. Why can't I get itunes back on my computer? Please help!

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Photoshop CS6 updated Raw and now get message saying "Could no complete your request the file was not found." Help

    I updated CS6 Camera Raw as it would not read my D7100 raw files. Since that I cannot open jpegs.
    Also, I go to Photoshop - About Plug-In - Camera Raw and get a pop up window saying "Could not complete the Camera Raw command because the file was not found."

    I apologize, guess I wasn't very good in giving info. It is on a Mac running Snow Leopard. I did the CS6 updates through Help/Updates but that did not update to where my camera (Nikon D7100) raw files could be read. I searched around on Adobe's site for the Camera Raw update that took care of reading them, forget what page I finally found a download link on but the update was a singular installer for Camera Raw. Once updated Photoshop CS6 stopped being able to 'find files' even when the file is dragged onto the Photoshop icon, or through the menu's Open. I have since uninstalled everything reinstalled the suite from the original installer. I know have a Photoshop that will open jpegs but just not my camera's raw files. Thanks for any help that you think might take care of the problem. I am not going to update the Camera Raw unless I can find out what happened and what to do to prevent it. I switched my camera to take jpegs until if and when I solve the mystery. :-) Thanks!

  • Lost itunes on pc after an update. Message said iTunes not installed.. Please reinstall. Tried to and error message "app failed because MSVCR80,dll was not found. Tried several times...same response. Finally uninstalled itunes and tried to reinstall . No

    Lost iTunes on pc after an update (Neighbor has same problem) Tried to open and message said " iTunes not installed correctly,Please reinstall itunes" . Tried to do so and same message with another message"application failed because MSVCR890.dll was not found.Re-installing may fix this problem" Tried several times and same message. Finally uninstalled itunes from computer and tried unsucessfully several times to re-install...Same messages as above appear when install looks like it's done......Help !

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Error message - The HP Deskjet 1510 Series was not found

    I bought the Deskjet 1514 on 19/07/15 and installed it on my relatively new laptop. It worked ok, then I did the Windows 10 upgrade on 01/08/15. I installed the updated drivers from HP for this device. What ever I do, (have uninstalled software, reinstalled at least 4 times, used the scan doctor, swapped USB cables and ports, cleaned the disk...) I just get the message The HP Deskjet 1510 series was not found, yet when aligning the ink cartridges the scanner will work but I cannot do the test scan in the scan doctor or scan anything using the HP software (which you have to do as there is no proper control panel on the actual device). As bought the device primarily as a scanner, I am not happy and just want the thing to work but haven't a clue how to proceed except to take the thing back to Tesco and get a refund and buy a Canon instead... Please can anyone help as the HP support is useless? The printer part is working fine, which makes it ridiculous.

    Hey , Welcome to the HP Support Forums!
    I understand that your HP Deskjet 1514 All-in-One Printer is not being detected via the USB Cable connection on your Windows 10 computer. I would like to assist you today with resolving this installation and product detection issue. Thank you for including all of the troubleshooting steps that you have attempted prior to reaching out for support. At this time I am going to have you complete some additional troubleshooting steps. We will be repeating the uninstall process for troubleshooting today as it is crucial that we have a nice clean slate to work with. Please complete all of the steps below.   Please disconnect the USB Cable from your printer and computer before proceeding.   Step 1:  Remove Driver:  1. Click on your Start button    2. Type Programs and Features in the 'Ask me Anything' box to the right of the Start button. If you just start typing when the Start screen is open it should automatically start typing in the 'Ask me Anything' section.   3. When Programs and Features opens scroll down the list of populated programs and look for your HP Deskjet. If you see your HP Deskjet listed please click on it and choose Uninstall. Follow the onscreen prompts to complete the uninstall.  4. Next, click on the Start button and type Devices in the 'Ask me Anything' box  5. Click Devices and Printers   6. Under the Devices and Printers window look for your HP Deskjet.  If the HP Deskjet is listed, please right click on it and select 'Remvoe Device' or 'Delete' 7. Next, under the Printers section in the Devices and Printers window, click on any printer that shows once just to highlight it. Click on Print Server Properties at the top of the window.  8. Under Print Server Properties, click on the Drivers tab. 9. If you see your HP Deskjet listed under Drivers, click on it and choose Remove at the bottom. 10. Click Remove Driver Only 11. Select OK 12. Select Apply and OK under the Print Server Properties window 13. Close Devices and Printers. Please proceed to the next step.    Step 2: Clear Temp Files:  1. Click on your Start button   2. Type Run. Click Run to launch the Run dialogue box.   3. In the Run box type %temp% and click OK      4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight. 5. Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item. 6. Close the Temp folder once it is emptied 7. Right click the Recycling Bin on your desktop and select Empty Recycling Bin. Please proceed to the last step.    Step 3: Install Device: Please click here to download and run the HP Printer Install WizardOnce the download has completed please follow the steps under the PIW to install your devicePlug in the USB Cable only when prompted by the installerOnce the installation has completed successfully please test printing and scanning to confirm that your product is functioning as per normal. Please respond to this post with the result of your troubleshooting. Good luck!

  • Error when importing the request

    Hi All,
    I have collected few queries in to one request and imported the request in to quality client and iam getting below mentioned error
      Execution of programs after import (XPRA)
      Transport request   : NBDK900366
      System              : NBP
      tp path             : tp
      Version and release: 372.04.08 700
      Post-import methods for change/transport request: NBDK900366
      Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20100406151003
      Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
      Error when activating element 4HBCVLNBZJBOCJ2A2NP4Y0XEM
      Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
      Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
      The errors affect the following components:
         BW-WHM (Warehouse Management)
      Post-import methods of change/transport request NBDK900366 completed
           Start of subsequent processing ... 20100406151003
           End of subsequent processing... 20100406151018
      Execute reports for change/transport request: NBDK900366
      Reports for change/transport request NBDK900366 have been executed
           Start of................ 20100406151018
           End of.................. 20100406151018
      Execution of programs after import (XPRA)
      End date and time : 20100406151018
      Ended with return code:  ===> 8 <===
    Kindly let me know how to correct the error.
    Regards

    Hi,
    As you have collected more than one queries in a single request,first identify the query which is giving problem.For this you can go to se11 and diasplay table RSRREPDIR,go to output list of the table and under ID field give the hexa decimal Id that you got in the error log.The table will display the query associated with this.
    In the target system check whether your query changes are reflecting or not.
    Make sure that you have collected all the necessary elements ,that is variables ,resricted KFs etc.You can check this via RSA1 Transport connections.
    Thanks
    Sreeja

  • Error when importing Web Service Model

    Hi,
    I am having trouble importing a Web Service model into my Web Dynpro component.
    I have successfully published my SessionBean method as a Web Service which works correctly when used from the Web AS Web Service Navigator.
    However, my Web Dynpro cannot correctly create a model from the WSDL. The problem seems to be with the last parameter of the method, a two-dimensional array of Strings. When importing the web service model, the following line of code get created in the respective Model class:
    logicalPort.generateMetadata(this.getKeywordsAsArray(), this.srcLang, this.getTgtLangAsArray(), ERROR no prop = parameters
    Obviously there is a problem with the code generation for the last parameter (the two-dimensional array) which results in this "ERROR no prop = parameters" message.
    Does anyone have an idea what I might be doing wrong? Is there a problem with multidimensional arrays in Web Dynpro model classes? I originally wanted to use a HashMap but naturally had to use a simple data type - any other ideas for a workaround?
    Cheers,
    Tim

    Hi,
    First, can you check whether you able to access your web service url in browser?
    or
    you can test your webservice from the NWDI Web service perspective, here you can test your web service is correctly functioning or not before using in your Web Dynpro application.
    This document clearly explains How to test the web service url and what is the correct procedure to consume the web service in SAP portal.
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b07992b3-b5af-2a10-9886-affcbeccc4c9]
    [http://help.sap.com/saphelp_nw70/helpdata/en/f4/1a1041a0f6f16fe10000000a1550b0/content.htm]
    Regards
    Raghu

  • "update rules inactive " error when importing transport request

    Hi experts,
    I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
    I have again tranported it twice after activating theose two update rules.
    Please help!!!!!

    Hi Heena,
    Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc.

  • MSSQL Server 2012. Error accessing reporting website. Not Found The requested URL /ReportServer1 was not found on this server. Unable to uninstall MSSQL 2008

    Hi all. I have recently installed MSSQL Server 2008, and was not able to access the URL when I clicked on it. It gave me a 404.
    When I installed 2012, I tried the same thing and it also throws me a 404 error. How should I go about solving this? What are the log files that you may need to help me solve this?
    At the same time, I have also tried to uninstall my 2008, but am always stuck at not being able to remove Client Connectivity Tools and some other components. Please let me know what log files you need and I will be happy to provide them. Thanks!
    The following is the log for the uninstallation.
    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -2068052368
      Exit facility code:            1212
      Exit error code:               1648
      Exit message:                  Failed: see details below
      Start time:                    2014-04-11 09:40:30
      End time:                      2014-04-11 09:41:37
      Requested action:              Uninstall
      Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
      Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
    Machine Properties:
      Machine name:                  ADC-PC
      Machine processor count:       8
      OS version:                    Windows 7
      OS service pack:               Service Pack 1
      OS region:                     Singapore
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered 
      Sql Server 2008 R2                                                       Management Tools - Basic      
                                   Enterprise Edition   10.50.1617.0    No        
      Sql Server 2008 R2                                                       Management Tools - Complete    
                                  Enterprise Edition   10.50.1617.0    No        
      Sql Server 2008 R2                                                       Client Tools Connectivity      
                                  Enterprise Edition   10.50.1617.0    No        
    Package properties:
      Description:                   SQL Server Database Services 2008 R2
      ProductName:                   SQL Server 2008 R2
      Type:                          RTM
      Version:                       10
      SPLevel:                       0
      Installation edition:          EVAL
    User Input Settings:
      ACTION:                        Uninstall
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\ConfigurationFile.ini
      ENU:                           False
      FARMACCOUNT:                   <empty>
      FARMADMINPORT:                 0
      FARMPASSWORD:                  *****
      FEATURES:                      CONN,SSMS,ADV_SSMS,CE_TOOLS,BROWSER,WRITER
      HELP:                          False
      IACCEPTSQLSERVERLICENSETERMS:  False
      INDICATEPROGRESS:              False
      INSTANCEID:                    <empty>
      INSTANCENAME:                  <empty>
      PASSPHRASE:                    *****
      QUIET:                         False
      QUIETSIMPLE:                   False
      UIMODE:                        Normal
      X86:                           False
      Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\ConfigurationFile.ini
    Detailed results:
      Feature:                       SQL Writer
      Status:                        Passed
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       SQL Browser
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1648
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
      MSI error description:         
      Configuration status:          Passed
      Feature:                       SQL Compact Edition Tools
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1648
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
      MSI error description:         
      Configuration status:          Passed
      Feature:                       Client Tools Connectivity
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1648
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
      MSI error description:         
      Configuration status:          Passed
      Feature:                       Management Tools - Complete
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1648
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
      MSI error description:         
      Configuration status:          Passed
      Feature:                       Management Tools - Basic
      Status:                        Failed: see logs for details
      MSI status:                    Failed: see details below
      MSI error code:                0x1648
      MSI log file location:         C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\sql_tools_Cpu64_1.log
      MSI error description:         
      Configuration status:          Passed
    Rules with failures:
    Global rules:
    There are no scenario-specific rules.
    Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140411_093720\SystemConfigurationCheck_Report.htm

    Strange, but finally the procedure below did solve my problem.
    # Go to Control Panel > Add or Remove Programs and look for '''Anti Phishing Domain Advisor'''.
    # If you click on ''Click here for support information'' you'll see it is a Panda program.
    # Uninstall '''Anti Phishing Domain Advisor''' program...
    # This did solve my problem
    See also [https://support.mozilla.com/en-US/questions/811399#answer-205531 Can't open mail. Get this message: 404 Not Found nginx/0.6.32]

Maybe you are looking for

  • I accidently unplugged my iPod touch midst a sync, now it won't sync anything to it. How do I fix this problem?

    I was moving my laptop while the iPod was plugged in and I accidently pulled on the cord halfway out of the iPod's plug. I pushed it back in but all of my music wsa deleted and even after trying to restore the iPod to factory settings I cannot get an

  • What's the easiest way to rename applications in Launchpad

    One of the problems with Launchpad is that it shortens long app names, like "Adobe After Effects CS 5.5" to "Adobe Aft...ects CS 5.5" which is not very useful! I figured out one way to edit the name displayed by Launchpad, which is to use a SQL edito

  • Cant edit book mark bar

    Went to edit a few of my bookmarks in the bookmark bar but for some reason i cant seem to access anywhere to edit them or re-arrange them. [IMG]http://i2.photobucket.com/albums/y45/thelibertine1982/12345.jpg[/IMG] Any ideas whats going on?

  • How to convert columns to rows

    I have 70 columns and I need to convert them into rows. Please help! Currently, it is showing as listed below message 1 message 2 message 3 message 4 message 5 .......... message 70 system 1 20 10 40 60 100 system 2 40 30 50 80 110 system 3 60 60 70

  • EA4500 on Sniper Hill ISP is not working so far, any ideas??

    Hello everybody, I am deployed to Afghanistan.  The ISP provided on the base is called Sniper Hill. The basic setup is there are CAT5e drops in every room. You plug in, and it is all web based to pay for and sign in to the service. Other people have