SharePoint Multi-Server Farm with LB and SQL Cluster.
Helllo,
We are setting up a Multi Server SharePoint 2013 Farm with a Load-Balancer.
We are also using SQL Server 2012, Two Node Cluster.
We have SQL Server Instance Running as a Service. Also I managed to install PowerPivot for SharePoint as a Instance.
Looking at various article's I have question if this Cluster Setup supported in SharePoint 2013.
Can the SharePoint Farm use this PowerPivot Instance as a failover service?
Or do I have to install Analysis services separately on Both SQL Nodes?
If so how do I configure Excel Services on SharePoint?
Thank you
Sham
PowerPivot is installed on the SharePoint server and is a scale-out service (you just install it on multiple SharePoint servers and make sure the Service Instance is started in SharePoint). Same with Excel Calc Services (but for this one you don't have
to install anything, just start it).
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Similar Messages
-
Hello Community
A Sharepoint 2013 Server farm created on a physical server
stores it's documents in SQL Server according to how SQL Server is setup.
If a Sharepoint 2013 Server farm is using Hyper-V and Virtual machines
how is BLOB data stored ?
Thank you
ShabeautAre you looking to use Remote Blob Storage? or RBS of SQL with SP?
It is going to be same way as it is configured for physical server.
Thanks, Ashish | Please mark a post helpful/answer if it is helpful or answer your query. -
Hello Community
If you have a clustered Sharepoint 2013 Server farm running RAID 10, on a
clustered WS2012 R2 server that has 10 hard drive slots:
(4) drives being part of the Sharepoint 2013 Server farm
(1) drive for the Web App Server
(5) are for hot swap if any of the production hard drives fail
The question(s) is:
- If the server only has 10 slots for hard drives are you still allowed to add a
NAS/RBS drive and does the NAS/RBS drive get clustered also, or does this scenario require
reducing the RAID level down to RAID 5 to allow for NAS/RBS hard drive?
- Does the NAS/RBS hard drive need a hard drive for hot swap?
- Does the NAS/RBS drive have to have Sharepoint 2013 Server or WS2012 R2 running on it?
- Does the Web App Server have Sharepoint 2013 running or just WS2012 R2 running on it?
Thank you
ShabeautRAID 10 requires a minimum of 4 hard drives. The LUN for RBS must be attached to the SQL Server, not SharePoint server, as a local drive. You just need to be running the minimum required OS for the version of SQL Server you're using.
Do you mean Office Web Apps by "Web App Server"? If so, that cannot have SharePoint installed on it. Otherwise, if you're just referring to it as another SharePoint server, yes it would have SharePoint installed on it.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Is backing up and Restoring SharePoint 2013 SP1 Farm with SQL 2014 RTM "Always On" High Availability now supported using "System Center 2012 R2 Data Protection Manager"?
I cannot find information anywhere.
Regards,
IgorThis is a DPM supportability issue, I believe. Last I heard, no it was not supported. SharePoint 2013 does not support SQL 2014 until the April 2014 CU. The CU should be out soon, although it appears to have been delayed (usually comes out on Patch Tuesday,
which was this past Tuesday).
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Hello Community
In a Sharepoint 2013 Server on-premise server farm
is there a way to provide video conferencing and a form of
real-time communication even taking into consideration
using Yammer?
Thank you
ShabeautHello Alex Brassington
Is there a way to embed/make accessible Lync server's audio/video conferencing functionality
into a SharePoint 2013 Server farm intranet site?
Shabeaut -
Hello Community
Currently I have a Sharepoint 2010 Server farm.
One server contains the database and DNS server
because it is the the domain controller.
The other server Contains the Sharepoint 2010 Server software
and is the the application server where applications such as Metadata,
UPs, etc, reside (including web applications with sites built with the UI).
Now I am going to change to Sharepoint 2013 Server because currently
there is no newer version of Sharepoint available.
I am ready to rebuild the current Sharepoint 2010 farm configuration into
a Sharepoint 2013 Server farm from scratch.
The question is what do needs to be added and\or changed to make the current
Sharepoint 2010 Server farm configuration work as a Sharepoint 2013 Server farm?
Thank you
ShabeautThere is no direct in-place uprade method for SharePoint 2010 to 2013. You need to create a new SharePoint 2013 farm from scratch and attach service and content databases to upgrade them. Check out Upgrade
to SharePoint 2013 for more information about the process.
If you have another server, you would install SharePoint 2013 on this. If you don't, you'll need to remove SharePoint 2010 from your existing server and then install SharePoint 2013. Check out Hardware
and software requirements for SharePoint 2013 before starting to make sure your server meets the minimum requirements for SharePoint 2013:
Web server or application server in a three-tier farm
Pilot, user acceptance test, or production deployment of SharePoint Server 2013 or SharePoint Foundation 2013.
12 GB memory
64-bit, 4 processor cores
80 GB for system drive
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights -
Is Azure needed in on-premise Sharepoint 2013 Server farms?
Hello Community
When you have an on-premise Sharepoint 2013 Server farm
do you need Azure or is Azure only needed when you have a
Sharepoint 2013 Server farm in a cloud?
Thank you
ShabeautNo, you do not need Azure for an on-prem farm, unless you're working with Low Trust SharePoint Apps.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Hello Community
When you setup a Sharepoint 2013 Server farm
if you want to provide failover clustering, can
the servers that the Sharepoint 2013 Server farm
failover to be located off-site in a different
location (i.e. how far away can the servers the
the primary server in the Sharepoint 2013 Server
farm be away from the failover cluster of backup
Sharepoint 2013 Server farm servers in distance?
Thank you
ShabeautHiya,
this article describes in detail the different aspects of creating a highly available SharePoint 2013 server farm.
Create a high availability architecture and strategy for SharePoint 2013
http://technet.microsoft.com/en-us/library/cc748824%28v=office.15%29.aspx -
User profile sync Sharepoint 2010 photos thumbnail with AD and Lync 2010 - error on Full Synchronization- get events 8311, 6110, 6803 FIMSynchronization Service
We're trying to set up sync between Sharepoint and AD so photos are displayed in Lync.
The certificate referenced in 8311 is not the sharepoint root cert, its the UCC cert with our FQDN of the site. sharepoint.domain.com
Is this causing the problem with the sync and holding up the photos?
I have tried several proposed fixes, it hasn't helped.
tried this as well:
http://blogs.technet.com/b/praveenh/archive/2011/05/11/event-id-8311-certificate-validation-errors-in-mss-2010.aspx
JoshTry this fix and see if its sync the photos:
http://blogs.technet.com/b/steve_chen/archive/2010/09/20/user-profile-sync-sharepoint-2010.aspx#Profile Picture Property
http://blogs.technet.com/b/steve_chen/archive/2010/09/20/user-profile-sync-sharepoint-2010.aspx#SyncPicAD2SPS
Update-SPProfilePhotoStore -CreateThumbnailsForImportedPhotos 1 -MySiteHostLocation <mySiteHostURL>
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Hi All,
Here the linked server is created between sql server 2012 64 bit and sql server 2005 32 bit. I am getting the below error when i try to access linked server from third server. I have created linked from Instance 1 to Instance 2. When i access it from
instance 3 i am getting the below error. SPN setting has been done between these 2 servers. Also the option 'Trust the delegate' is enabled for the both the service account.
'Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
Appreciate your quick response.
Vikas.M.SHello,
Please read the following resources:
http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ea26de43-4c6b-4991-86d7-e1578f107c92/linked-server-login-failed-for-user-nt-authorityanonymous-logon?forum=sqldataaccess
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Sharepoint 2013 server dropped off domain and readded
I My sharepoint 2013 server dropped off the domain (still trying to figure out why) so I added it back onto the domain. The problem now is alot of the services aren't showing under "Manage services on server", in fact I only have 7 services (Application
Discovery, Distributed Cache, Lotus Notes, Machine Translation, Foundation Timer, Powerpoint COnversion, Word Automation. I am able to navigate around my intranet site but I cannot access mysites or the userprofile service application.
Error when accessing userprofile service app:
Application error when access /_layouts/15/ManageUserProfileServiceApplication.aspx, Error=This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your
administrator.
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ManageUserProfileServiceApplicationBase.OnPreRender(EventArgs e)
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Do I need to rerun the configuration wizard?
Environment:
-Server 2008 R2
-Sharepoint 2013 Enterprise
-MS Sql 2008 R2 server
-Virtual machine (Vmware)HI,As you said Its dropped off from domain meaning it already disconnected the connection from AD.Thats why UPA is not working.Once the server is added back to Domain,The UPA will not connect to automatically.So iwould suggest to create the UPA connections
again and crawl the Import.Check the below link on the issue with UPA.
http://expertsharepoint.blogspot.de/2014/03/user-profile-service-and-user-profile.html
http://expertsharepoint.blogspot.de/2014/03/user-profile-synchronization-service.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
Help needed with Express and SQL Dev
Recently was asked to make a sql server application work with Oracle. I have never worked with Oracle products and no one in my small shop has either. I downloaded the Express 10g onto a virtual machine on my dev server and oracle SQL Developer locally. I have no idea how to connect to the Express db on the prod server using sql developer. I have tried Basic and TNS connection types and all the errors are very cryptic. Any help is appreciated. Do I need to install anything client side to connect to the server?
I figured it out. I had to use the Basic connection type and I DL'd the J2EE .
Edited by: jt_stand on Sep 25, 2008 10:51 AMHad to use the Basic connection type and get the right combination of options. I can now connect to my remote Express server with my local sql developer program.
-
Problem with DBMS_OUTPUT and SQL statment with a function
I am using SQL Developer version 3.0.04 and I have a function that has a dbms_output statment in it. I am running the following SQL to select the output of that statment.
select A.A_FUCTION('TEST') from dual;
The output works fine but the dbms_output line does not show in the dbms_output window. I turned on the output window etc. and i can get the select to print out the output if i wrap it in a declare begin end wrapper... and then change the query to insert the return value into variable.
just wondering if there is way to get the dbms_output to flush out with just an SQL statment instead of in a begin end wrapper etc.just wondering if there is way to get the dbms_output to flush out with just an SQL statment instead of in a begin end wrapper etc.works fine in sql*plus, so I guess it must be a preference or sth. in sql*developer:
SQL> set serverout on
SQL> create or replace function f1 (r int)
2 return int
3 as
4 begin
5 dbms_output.put_line ('Hello World ' || r);
6 return r;
7 end f1;
8 /
Function created.
SQL>
SQL> select f1 (rownum) f1 from dual connect by level <= 3
2 /
F1
1
2
3
3 rows selected.
Hello World 1
Hello World 2
Hello World 3
SQL> -
Sybase with ase and sql anywhere 16 using ssma
ok this may sound like a very dumb question but how does one connect to sybase central (sql 16 anywhere) using ssma.
In my ase connections when i do test connection it returns successful however when i click on ssma > connect to sybase it returns
ERROR [08001] [SAP][ASE ODBC Driver]Client unable to establish a connection
i have my network server running on sybase using sql anywhere 16 network server.
I also had my firewalls off
any help would be appreciated.Hi Jeff ,
Thank you so much for the reply.
I have used 32 bit PHP.
But now we have resolved above mentioned issue. Now we can connect PHP with SQL Anywhere successfully.
Regards,
Vishal Chikhalikar
PHP Programmer -
Uninstall SQL Server 2008 Express R2 and SQL Server 2012 unsuccessfully
HI
I want to uninstall SQL Server 2008 R2 and SQL Server 2012 but it was successful.
When I try to uninstall 2008 R2
It shows the sqlsupport.msi can't find
Warning 26003. Microsoft Server 2008 R2 Setup Support Files cannot be uninstalled because the following products are installed:
SQL Server 2008 R2 SP2 Common Files are installed
SQL Server 2008 R2 Dabtabase Engine Shared
Microsfot SQL Server R2 RsFx Driver
SQL Server 2008 R2 SP2 Database Engine Services
When I uninstall 2012, it shows the SQL Browser has been installed.
Warning 26003. Microsoft SQL sERVER 2012 Setup Support Files cannot be uninstalled because the following products are installed:
SQL Server Browser for SQL Server 2012I tried to uninsall SQL Server 2008 R2 and SQL Server 2012.
Yes, I did what you said : right click on Microsoft SQL Server 2008 R2 and then uninstall.
System pop up window says :
Warning 26003. Microsoft SQL Server 2008 R2 Setup Support Files cannot be uninstalled because the following products are installed:
SQL Server 2008 R2 SP2 Common Files are installed
SQL Server 2008 R2 Dabtabase Engine Shared
Microsfot SQL Server R2 RsFx Driver
SQL Server 2008 R2 SP2 Database Engine Services
I hope you are uninstalling from Add remove program. Can you first uninstall
SQL Server 2008 R2 SP2 Common Files are installed
SQL Server 2008 R2 Dabtabase Engine Shared
Microsfot SQL Server R2 RsFx Driver
SQL Server 2008 R2 SP2 Database Engine Services
And then uninstall the
Microsoft SQL Server 2008 R2
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP
Maybe you are looking for
-
tengo problema con mi tascam 1082 tengo una mac bookpro i7 y no logro tener un conectividad correta la conexcion de mi puerto fire wire 800 pero la de la consola usa una coneccion fire wire 600 como saber si la macboook pro i7 que tengo pueda funcio
-
Hello, I want to add a checkbox to a component's dialog box but would like the true/false event to store different values, e.g., "yes/no", "0/1" or "fred/tom" instead of "true/false". How do I do this?
-
Is there an update for the Nikon D600 for CS5.5 Bridge?
Just wondering if the Nikon D600 has been added to the list of cameras supported by Adobe Bridge in CS5.5?? I can't seem to find anything.
-
Is there any way to make it so that I can use the F buttons, not the picture shown on them? For example, how could I press F3 to take a picture in War Craft 3 instead of pressing it and making the sound go off? Thanks for the help! Sorry if this goes
-
I have a server 2003 primary domain controller x32. I have a server 2008 R2 x64 that gives me the message you must run adprep /forestprep and wont continue. I put the server 2008 R2 x64 cd in the server 2003 x32 cd-drive and ran adprep /forestprep