Sharepoint WFE server not accessible
Below is a SharePoint network diagram in which there are 2 Sharepoint WFE servers (3 and 4). Sharepoint 2013 is installed and farm configured on both the servers, first on Server3 then on Server4. When installing on server4 we have joined it to the existing
Sharepoint farm which is (Server3). When Server3 is switched off the application is down and central administration is not accessible from Server4. If Server4 is switched off and Server3 is switched on, Central administration site of Server3 is accessible.
However both are using the existing SAN DB.
Is it possible for Server4 to work the same way if Server3 is down?
Have you followed the CA high availability guide:
http://www.harbar.net/articles/spca.aspx
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Similar Messages
-
Livecache lock server not accessible after system refresh
Hello,
I have performed a refresh of SCM + livecache from production to QA when starting the livacache from LC10 i get a message Livecache lock server not accessible. The livecache is started but when i look at the status there is a warning SQL access not possible.
I did an export of the config table and reimport and the server named are correctly defined for:
LCA
LDA
LEA
From the administration report of LCA
Initialize livecache
Follow-up Processing: /SAPAPO/DELETE_LC_ANCHORS
Start Livecache
Follow-up Processing: SLCA_LCK_SYNCHOWNERS
By running those program in se38
SLCA_LCK_SYNCHOWNERS (Livecache lock server not accessible)
SLCA_NON_LC_RELEVANT_CLIENT (Could not create a connection to livecache)
I checked and the relevant client is selected.
When i check the alert monitor from livecache - lca - connectivity - dbmrfc and native sql is in red with the following message:
SQL Statement Execution Instance Online, but no SQL access possible.
Also from SM21 i have errors saying Database error -4025 at CON
Let me know if you already encountered this issue and how it was resolved.
Thank you,
Martin Mayer
Edited by: Martin Mayer on Jan 4, 2012 4:02 PM
Edited by: Martin Mayer on Jan 4, 2012 4:07 PMI have checked that tread already the thing is when performing the check In db59, I´ve the LCA,LDA,LEA it fails.
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
SQL Code: 4025
Edited by: Martin Mayer on Jan 4, 2012 5:26 PM -
Not able to access my Gmail in my iphone. Error message pops up
"...... mail server not responding ........"Did this used to work or have you just set it up for Gmail access? Did you do it in accordance with: http://support.apple.com/kb/ht4810 ?
Are you accessing it via cellular network or WiFi? If WiFi then is this your usual network?
If it has been working fine for some time and now suddenly you get this message having changed nothing then it is most likely a temporary glitch at Google end or your ISP perhaps. -
Website on Mac Mini Server not accessible. Error 403 index document not available.
Dear all,
I'm trying to host a website on my Mac Mini Server. As far as I can see, my DNS is working correctly. Also my firewall is setup correctly. (I'm hosting another website which works OK). But I setup a new site. Basically a copy of the working site. But this site doesn't reflect an index.htm page. I receive an Error 403 with further information that there is no index document or that the site is secured. There is a contact link on this page directing to my webmaster. So I conclude that something is working, but no index.htm page. Has anyone similar experience? And offcourse a solution?
Many thanks.Launch Terminal.app and issue the commands:
cd /Library/Webserver/Documents/
ls -al
And see if the files are readable by the web server. Here's an example index file listing that's owned by root and with group access for admin folks, and this file is marked as readable and writable for the owner and the group, and is readable for everybody else:
-rw-rw-r-- 1 root admin 5094 Jul 25 2009 index.html
In this configuration, the web server would be using the other access; the web server can read this file, but not write to it. Here is how to duplicate these ownership and access settings on your own index.html file, assuming that you have that file present in the ls listing above, and assuming that you have issued the cd (change default directory) command shown above:
sudo chown root:admin index.html
sudo chmod ug=rw,o=r index.html
You will need to enter your administrative password for the sudo command.
I would very strongly suggest that you start learning some basics of bash and of Apache, because you're going to be needing those skills very soon. -
Oracle Report Server Not Accessible
Hi Folks,
I'm facing a series of issues with Oracle reports server 11g. I'l list the issues one by one.
1. I'm not able to start the weblogic server from the domain which i've created for Reports. It gives me authentication error. I've tried clearing tmp directory, clearing temp directory and creating a boot.properties in the security folder. But nothin seems to work.
2. I'm not able to start the report server from the instance path C:\Oracle\Middleware\asinst_1\bin\opmnctl.bat. The contents of opmnctl.bat is as follows
@ECHO OFF
SETLOCAL
set PERL5LIB=
set JAVA_HOME=C:\Oracle\Middleware\jdk160_29\bin
set ORACLE_HOME=C:\Oracle\Middleware\Oracle_FRHome1
set ORACLE_INSTANCE=C:\Oracle\Middleware\asinst_1
set OpmnService=OracleProcessManager_asinst_1
"C:\Oracle\Middleware\Oracle_FRHome1\opmn\bin\opmnctl.bat" %*
when i run this from cmd i get all the components as alive but i'm not able to access the reports path with the url. (http://domainname:7003/console or /em).
this says connection refused.
3. When i try to access the url http://domainname:8888/reports/rwservlet gives me apache bridge error. I've been trying all the things given in google for the past 1 week but still its not working.
This is my Oracle Forms and Repots Installation log:
Middleware Home Location: C:\Oracle\Middleware
Oracle Home Location: C:\Oracle\Middleware\Oracle_FRHome1
Oracle Instance Location: C:\Oracle\Middleware\asinst_1
Oracle Instance: asinst_1
Domain Option: Create Domain
Domain Name: Sapphire
Domain Home: C:\Oracle\Middleware\user_projects\domains\Sapphire
Domain Host Name: PC201845.cts.com
Domain Port No: 7001
User Name: weblogic
Automatic Port Detection: true
Administrator Console: http://PC201845.cts.com:7001/console
EM Console: http://PC201845.cts.com:7001/em
EMAgent URL: http://PC201845.cts.com:5155/emd/main
Forms URL: http://PC201845.cts.com:8888/forms/frmservlet
Reports URL: http://PC201845.cts.com:8888/reports/rwservlet
I'm not able to login to any of this url.
pls help with the issue.
P.S - I'm able to start weblogic server from base_domain but not from Sapphire domain which i created during installation of reports 11g.
I need a way to start the Weblogic server from Sapphire Domain and also start reports server and access the reports url.TemTesh wrote:
After machine shutdown without shutdown IAS server, Oracle application server report service can not restart.
below is the error
11/2/10 5:26 AM NfsServer: (TCP:Nfs-6) Exception
oracle.ifs.common.IfsException: IFS-71002: I/O error.
java.net.SocketException: Connection resetAnd this seems to be the problem. Missing NFS share? TCP=<i>transmission control protocol</i>. NFS=<i>network file server</i>.
For some reason (very like due to how it has been configured), the s/w attempts to use a NFS share - and uses the TCP wire protocol. This NFS share is not mounted or not available.
Check the NFS server (it needs to be up and exporting that share), there has to be network connectivity between the report server and the NFS server, and the report server needs to have the required config and access permissions for mounting that NFS share. -
FTP on Mac OS X Server - not accessible from outside
I need to set up FTP on my mac mini urgently as I need to share over 0,5 TB of video material for a "last-minute" production.
I have set everything up wth shares and all and have a "XYZ" user under "Local Network User" so i can give others this username/password and have services FTP and File Sharing enabled for this user. Yet I can not connect to my server via FTP and 21 port from outside world, although FTP is enabled both on router and as a service in Mac OSX Server app.
What am I doing wrong? VPN and other services such as email and the rest are working like a charm.
Thanks so much!Any ideas? Still struggling with this problem...
-
Site not accessible from the Load balanced web front end server - sharepoint 2010
I have a production environment with 2 WFE's(sp-wfe1 & sp-wfe2), 2 APP's and 2 SQL clustered VM's.
2 WFE's are load balanced using hardware load balancer.
An A-Record(PORTAL) is created in DNS for the virtual IP of the load balancer which points to the 2 WFE's.
A web application is created on the WFE's on port 80.
alternative access mapping is configured and the load balanced record "http://PORTAL" is used under the default zone.
Under IIS I have edited the bindings for the sharepoint site at port 80 and added the HOSTNAME as PORTAL.
Result: The site is accessible from outside the server and works fine.
ISSUE: The site is not accessible within the WFE's(sp-wfe1 & sp-wfe2).
When I browse the site from the WFE's server it ask for the credentials and when I enter the credentials and click OK it ask the credentials again and again and in the end displays a blank page.
Kindly help me in this issue because I am clueless and couldn't find anything helpful on the internet.
Regards,
Mudassar
MADDY-DEV Forum answers from Microsoft ForumLoop back check.
http://www.harbar.net/archive/2009/07/02/disableloopbackcheck-amp-sharepoint-what-every-admin-and-developer-should-know.aspx -
Hi,
I have taken farm back and restore it in new UAT environment, while access to the main site getting the below error:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 866476f3-23dd-4e1e-97af-bffc62cc2d57
Date and Time: 7/15/2014 11:26:35 AM
When i checked in log i got below error
System.Data.SqlClient.SqlException: A network-related or instance-specific
error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40
- Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecu...
Thanks in advance
Said Al BalushiHi Wendy,
i have checked all below points, every thing is fine but still i am getting the same error.
Check SQL services are runing
Check remote conenctions are enabled
Check SQL Browser service is runing
Check TCP/IP protocal enabled at SQL server
Check out windows firewall setting
Thanks,
Said
-
We noticed that the Intranet Content Incremental Crawl started on 12/8/2014 at 5.00 PM CST is still not completed and currently it is in Hung state waiting for the propagation
to be completed as the QUERY server not responding "SPFEI02”. Following are the quick status currently on Search in Intranet.
There is no Index corruption recorded on the Index server.
There is no Index corruption recorded on both the Query server’s.
Search functionality is working fine in Intranet application.
We tried with restarting the "Office SharePoint server search" service under Services.msc of CPBPSPFEI02 server but didnot help us.
Verified the Search account status,accessibility of the network path from Index server to the WFE (Query server role) and also the permission settings on the index folder present on CPBPSPFEI02 and everything looks good. Last weekend we had Windows Patch
updation process completed on this server.
Could you please help us how to fix this issue with out any index corruption and also in the search functionality disruption on the application.
Environment Details
1) MOSS 2007 SP2 platform with license type Enterprise Edition
2) 2 WFE's,1 APP server and 2 DB servers ( 1 clustered DB server and 1 DB server attached to Farm)
Thank YouHi,
Please check
Indexing Schedule Manager timer job.whether it's working or not ?
This could be a probable reason to hang the search crawl.
Regards
Soni K -
New version of WSP added to farm, only updated on WFE and not on APP server
I have a farm consisting of 1 WFE, 1 APP, and 1 SQL server.
One of my developers (I know I know) needed to update their WSP. They retracted, deleted, and readded and deployed successfully. They ran their workflow, the logs on the APP server were showing traces of the old solution.
We're thinking that it deployed properly to the WFE but not the APP server.
The SharePoint Timer Job was restarted several times, still a problem.
I've checked the ULS logs but nothing is jumping out yet.
Any suggestions on what to check appreciated.
Thanks,
ScottHi Scott,
With timer service and SharePoint Foundation Administrative web service running on the WFE servers, the farm solution will be deployed to the WFE servers which run the two services.
So as APP server does not run the SharePoint Foundation Administrative web service, so the solution cannot be deployed to the APP server.
You are correct, it is not recommended to run the SharePoint Foundation Administrative web service in APP server in case of just running the service applications in the APP server.
So you need to install the solution in APP server separately.
However if the solutions are used for web applications, you can choose to not install the solution in APP server.
More references:
http://msdn.microsoft.com/en-us/library/office/aa544500(v=office.14).aspx#sectionSection2
http://technet.microsoft.com/en-us/library/cc262995(v=office.14).aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
Getting error while connecting Sharepoint WFE to another Sql Server 2008
Hello All,
I am trying to connect a sharepoint wfe to another Sql server 2008 and getting error. This is what I am trying to do.
#Disconnecting present database serer
Disconnect-SPConfigurationDatabase
#Connecting to another database server
Connect-SPConfigurationDatabase -DatabaseServer "ServerName" -DatabaseName "SharePoint_Config_nameabcd" -Passphrase $SecuredPassphrase
Getteing below error
Connect-SPConfigurationDatabase : Cannot open database "SharePoint_Config_nameabcd" requested by the login. The login failed.
Login failed for user 'domain\username'.
At line:1 char:32
+ Connect-SPConfigurationDatabase <<<< -DatabaseServer "ServerName" -Database
Name "SharePoint_Config_nameabcd" -Passphrase $SecuredPassphrase + CategoryInfo : InvalidData:(Microsoft.Share... urationDatabase:SPCmdletConnectSPConfigurationDatabase) [Connect-SPConfigurationDatabase], SqlException+ FullyQualifiedErrorId
: Microsoft.SharePoint.PowerShell.SPCmdletConnectS PConfigurationDatabaffsadss FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletConnectS PConfigurationDatabase
Please advise to resolve the error.Hi,
We have not heard from you in a couple of days.
Just checking in to see if the information was helpful. Whether your issue is solved.
Have a great day!
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread. -
Sharepoint 2013 Server Search Not Working, URGENT!!
Hi thr,
im a current sharepoint 2013 server user and im facing a severe problem with sharepoint now, i cannot search using the search bar
And the Search Service Application keeps giving me this error, 'The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component in search application ‘Search Service Application’
is in a good state and try again. '
I have tried every possible way including creating new search service application, restarting the services , everything i had already tried but its still not working and keep giving me errors
Anyone can help me? its very urgent here, thanksCan you check out the patch status of the servers? If you've got auto-update on the servers and something for SharePoint has been downloaded and installed, it might need to be configured still. Either the PS Config (as suggested below) or the Set-up wizard
will take care of this
Additionally, the TechNet Wiki has something that might help you out
http://social.technet.microsoft.com/wiki/contents/articles/22838.sharepoint-2013-the-search-service-is-not-able-to-connect-to-the-machine-that-hosts-the-administration-component.aspx
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
Server Error in '/' Application.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4846887
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +4860189
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +90
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +342
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +221
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +189
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +185
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +31
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +433
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +499
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +65
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +117
System.Data.SqlClient.SqlConnection.Open() +122
System.Data.Common.DbDataAdapter.QuietOpen(IDbConnection connection, ConnectionState& originalState) +31
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +112
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +287
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +92
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1297
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +19
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +142
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +73
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +72
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +44
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +171
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +842
Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082On what website/link did you received this error message ??
-
The server was not found or was not accessible.
I've upgraded to a Windows 8.1 machine, and installed SQL Server 2012 (version 11.0.3128.0), and SQL Server Express 2008 R2 (v 10.0.5500.0).
I've created a database in the 11.0.3128.0 instance, and populated it by restoring it from a .BAK from another server.
I've opened Visual Studio 2012, and accessed the database via the Server Explorer, with no problem.
I've copied a running web app to this same machine, and opened it in Visual Studio 2012. But when I attempt to run in debug mode, my first attempt to access the database gives me this error:
"A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
Here's my connection string, as defined in the <connectionStrings> section of my App.Config:
<add name="EMSDataModelContainer"
connectionString="metadata=res://*/EMSDataModel.csdl|res://*/EMSDataModel.ssdl|res://*/EMSDataModel.msl;provider=System.Data.SqlClient;provider connection string="Data Source=xps-8500;Initial Catalog=EMS;Integrated Security=True;multipleactiveresultsets=True;App=EntityFramework""
providerName="System.Data.EntityClient" />
Thanks in advance.Hello,
Please read the following resources:
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/20d8edf8-f36d-48ac-8623-c06e485448a3/i-have-a-problem-with-a-connection-to-database-sqlserver-2012?forum=sqlexpress
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Maybe you are looking for
-
Is there any way to use osmf plugin with videodisplay component?
Hello i use flex sdk hero (17689 build) i want to use OSMF plugin for the captioning. i created object of media element with metadata for captioning plugin so eventually i get object of CaptioningProxyElement type from mediaFactory , than i pass i
-
my new iphone 5 is frozen, with the cord to computer symbol on the screen after failing to finish updating to ios 7. iTunes no longer sees the phone. I've tried rebooting the computer, rebooting the iPhone, but iTunes still doesn't see the iPhone.
-
CS6 New iMac non-recognized plug-ins issue.
I have a brand new iMac and when I started using CS6 (transferred from my time machine back up), it was fine for a few days until inDesign started telling me various plugi-ins were not recognized. I had to uninstall, then re-install and it seemed fin
-
Whenever I try to open up iTunes, i get a message that says, the ITunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file. I am the admin for my computer and I don't know why this has happened. I Tunes ha
-
Errors in smartform ! A SSFCOMPOSER 173 , ! W SSFCOMPOSER 304
Hi All, I have a z driver program and z smartform for Purchase order.The Smartform was working fine until i did some changes in the Template used in smartform.I changed the length of one of the cell in the template. Since then when i am trying to pri