Sharing files in Reader
We are trying to share PDFs over a company network, but are having problems with people not being able to save their changes. Some of our employees work at a site that is out of state, but they are still connected to the company network. We have about six people who are all trying to review the same manual(s), but they are all having problems saving their comments. The PDF has been enabled for commenting in Reader. We would like to find a way to be able to share these documents and not have to worry about someone else having the same file open. We have thought about using Google Docs, but I would like to make this as simple as possible. Thanks.
Instead of using Reader-extended files and saving the comments back to the master on the server (which will of course fall over if the file is locked by another user), why not use Shared Review in Acrobat? This tracks the comments using a server (your own or Acrobat.com) so each user makes comments on their own independent copy, synchronizing theirs with everyone elses in real time. You as the review initiator can then import the comments via Tracker into your master copy of the file, but as nobody else is writing to the file on the server, there are no locking issues.
Similar Messages
-
OS 10.5 Sharing – Files appear as "Read Only" – SOLUTION!
I have been having problems with sharing files between two macs since upgrading to 10.5 Leopard. Files and catalogs were available on both machines and both were set to "read & write" however files would only open as "read only" and files could not be saved between macs.
After an entire day of trying to find an answer (and talking to Apple Care for hours) I have found the solution. And it's a very simple fix. The UUID needs to be changed on the computer giving you trouble.
Here's the solution from the original post below:
In OS X 10.5, you can change the UUID for your account by going to the "Accounts" system preferences and clicking the lock to authenticate. Then right-click (control-click) your account name and select "Advanced Options." Then click the "Create New" button next to the UUID field, and a new number will be generated. This should be done on the computer that you cannot properly connect to, and not on the computer you are connecting from. All this will do is provide a new identifier for your account when you are logging in remotely, and should clear problems with authentication and permissions mismatches.
Hope this helps!
Here's the original post from MacFixIt (I am including the entire post so that anyone searching for these phrases or error messages can find it quickly):
Apple Discussion poster "Thomas Kranz1" writes:
"I am suddenly getting this message when I try to copy a file from my new MacBook Pro to my PowerBook running 10.4.9. 'You may need to enter the name and password for an administrator on this computer to change the item named [file I am trying to transfer] (stop, continue). I hit continue and get the error message: 'The item [that I am transferring] contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?' I say continue and get the error: 'The operation cannot be completed because you do not have sufficient privileges for some of the items.' My network was working fine until today. I can copy fine to all other computers on my network. But not this one."
When OS X transfers data between computers, you first log into the remote system and mount a readable or writable sharepoint from the remote system. Then when you transfer files they should be given ownership and permissions based on the account you're using on the remote computer (not the current computer). This ensures you can access the files anytime and from anywhere as long as you use the same credentials to log into the computer containing them.
When problems with permissions in file transfers occur, you should first check your sharepoints to ensure the account you are using has read-and-write access to the share. To do this, open the "Sharing" system preferences and select the "File Sharing" service. Then ensure the sharepoint is listed in the "Shared Folders" list and then give the username you're logging in with both "Read & Write" permissions. If you are logging in from a PC, then click the "Options" button and enable "Share files and folders using SMB" and then select the account you wish to use to log in. Clicking "Done" should allow you to log into the system using the specified credentials.
If the system keeps presenting insufficient privileges errors even after supplying appropriate credentials, the problem may be with how the computer is authenticating the account being used. For network directory authentication, OS X uses a "Universally Unique Identifier" or "UUID" number to identify user accounts, and if there is a problem with the UUID not matching, you may still be able to log in locally to the remote computer but may have permissions problems when using the same credentials remotely. Apple started implementing network directories that use UUIDs in OS X 10.3, and in 10.5 they're required, since Apple changed from the NetInfo authentication technologies to "Open Directory," which is built for network directory authentication and implements UUIDs.
In OS X 10.5, you can change the UUID for your account by going to the "Accounts" system preferences and clicking the lock to authenticate. Then right-click (options-click) your account name and select "Advanced Options." Then click the "Create New" button next to the UUID field, and a new number will be generated. This should be done on the computer that you cannot properly connect to, and not on the computer you are connecting from. All this will do is provide a new identifier for your account when you are logging in remotely, and should clear problems with authentication and permissions mismatches.
For people having problems with copying files to a 10.4 machine, it may help to ensure ownership on the shared resource is properly set. To do this, launch the terminal and type the following command, followed by a single space:
sudo chown -R `id -un`
NOTE: The command uses "grave accent" marks (`), which is the character under the "tilde" next to the "1", and not apostrophes or single-quotes.
After this has been typed (with the space following it), drag the shared folder to the terminal and the full path to the folder should complete. Then press enter and supply your password to complete the command. When this has been run, try copying the files again.David,
Of course the files are checked in; otherwise I wouldn't be able to create a configuration on them and base a workarea on the configuration in order to download the files.
Here's my problem: I check-in and out files while developing a release. A release for me is a set of (checked-in) objects and folders grouped in a checked-in configuration.
Once I'm finished I want to download the release. In order to do this I base a 'DOWNLOAD' workarea on the configuration that represents the release.
Then I download the DOWNLOAD workarea; and have all files in the release on my file system. But I do not want them to be READ-ONLY !!, since the folders and files that make up my application have to be moved and copied around a couple of servers using FTP scripts and this is a whole lot more complicated when the files and folders are read-only.
If this cannot be disabled than Oracle SCM is a lot less attractive for our way of doing SCM... although I have been able to adjust all my Java FTP classes so that write-access is enabled on all file and folders after download and before publishing the application to all servers.
By the way I use the Java API of Oracle SCM to download the contents of the DOWNLOAD workarea.
Regards,
Rinse Veltman
CIBER Solution Partners -
How to read shared files from win7 machine?
Hi all,
Sorry to have to ask and bother you guys, but this is harder than I thought I have already set up my Windows 7 machine such that it is in a home group, but I still can't get my mac to find the files I have shared. Set up:
- Main desktop is a Windows 7 home premium 64 bit machine
- I want my newly acquired Macbook Air to view the shared files
- The desktop is connected to the router via LAN while my MBA via Wifi, if this is of any significance I already have the IP addresses for both computers, and as they're both on 192.168.1.XXX it should mean that they're indeed both connected via the same router, which I thought would've made things easier. I kept on trying to get my MBA to find my desktop by looking up the desktop's IP address but it doesn't work. Was wondering if anyone know what I'm doing wrong, thanks so much in advance!!I can offer 2 suggestions.
1) On your PC, click on the Start button and select Getting Started. Then select Share a homegroup. Near the bottom of the dialog box there are several options. One is troubleshooting. Run through the troubleshooting steps to make sure filesharing is really running.
2) if it is running properly, when you open a window on the Mac and look at the sidebar, you should see your PC computer listed under Shared. To log onto your Windows computer you should only need to select it and type in your Windows account name and password. -
Sharing files with Creative cloud for teams
HI,
I am looking at getting creative cloud for teams, but I want to keep our existing CS suite users who are already on maintenance plans.
Can I share files on the creative cloud between these two types of users?
Does Adobe Bridge see these files ?
Is there any way of doing version control ?
We are also worried about this
"If a team member leaves the company, what happens to their files stored in Creative Cloud?
The IP is associated with the individual, not the company. The individual will have a 90-day grace period to delete their files."
Also we are in Australia and we are concerned about the speed. Can anyone advise what the speed is like ?
rgds RenovatorAnyone who signs up for the Creative Cloud can share files. You do not need to be a Creative Cloud member to view a shared file, only to do the sharing.
Adobe Bridge does not see the files unless you use Creative Cloud Connection to sync the files to your local computer.
There is no version control yet. It is on our road map.
Being in Australia should not be an issue, but I will let other customers from Australia comment. -
Update Statement Simply hanged but doing db file sequential read
Hi,
Last night we had issue with one of the prod server where we updating one of table which contains large number records in millions.Same identical machine completed in1 hour and other box never completed but doing db file sequential read but in the long ops the last statement it was done 20:16 after that nothing is happening but i ran few trace on that user.
/u01/app/oracle/admin/SURV2/udump/surv2_ora_10048.trc
Oracle Database 10g Release 10.2.0.4.0 - Production
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db
System name: SunOS
Node name: prdfa001
Release: 5.10
Version: Generic_139556-08
Machine: i86pc
Instance name: SURV2
Redo thread mounted by this instance: 1
Oracle process number: 18
Unix process pid: 10048, image: oracle@prdfa001
*** 2010-09-09 23:37:07.484
*** ACTION NAME:() 2010-09-09 23:37:07.473
*** MODULE NAME:(SQL*Plus) 2010-09-09 23:37:07.473
*** SERVICE NAME:(SURV2) 2010-09-09 23:37:07.473
*** SESSION ID:(289.54) 2010-09-09 23:37:07.473
Received ORADEBUG command 'unlimit' from process Unix process pid: 3983, image:
*** 2010-09-09 23:37:20.315
Received ORADEBUG command 'event 10046 trace name context forever, level 12' from process Unix process pid: 3983, image:
WAIT #7: nam='db file sequential read' ela= 11160 file#=13 block#=2252349 blocks=1 obj#=166421 tim=12499462835161
WAIT #7: nam='db file sequential read' ela= 2857 file#=13 block#=2249751 blocks=1 obj#=166421 tim=12499462838137
WAIT #7: nam='db file sequential read' ela= 3810 file#=13 block#=2251361 blocks=1 obj#=166421 tim=12499462842048
WAIT #7: nam='db file sequential read' ela= 4459 file#=13 block#=2247059 blocks=1 obj#=166421 tim=12499462846564
WAIT #7: nam='db file sequential read' ela= 2841 file#=13 block#=2247507 blocks=1 obj#=166421 tim=12499462849468
WAIT #7: nam='db file sequential read' ela= 427 file#=13 block#=2247568 blocks=1 obj#=166421 tim=12499462850032
WAIT #7: nam='db file sequential read' ela= 1187 file#=13 block#=2248264 blocks=1 obj#=166421 tim=12499462851327
WAIT #7: nam='db file sequential read' ela= 2687 file#=13 block#=2250707 blocks=1 obj#=166421 tim=12499462854178
WAIT #7: nam='db file sequential read' ela= 3657 file#=13 block#=2249697 blocks=1 obj#=166421 tim=12499462857896
WAIT #7: nam='db file sequential read' ela= 4139 file#=13 block#=2247074 blocks=1 obj#=166421 tim=12499462862093
WAIT #7: nam='db file sequential read' ela= 4180 file#=47 block#=3649690 blocks=1 obj#=166421 tim=12499509270445
WAIT #7: nam='db file sequential read' ela= 4802 file#=47 block#=3649309 blocks=1 obj#=166421 tim=12499509275327
WAIT #7: nam='db file sequential read' ela= 2459 file#=47 block#=3652697 blocks=1 obj#=166421 tim=12499509277859
WAIT #7: nam='db file sequential read' ela= 4015 file#=47 block#=3652826 blocks=1 obj#=166421 tim=12499509281948
WAIT #7: nam='db file sequential read' ela= 2248 file#=47 block#=3651610 blocks=1 obj#=166421 tim=12499509284269
WAIT #7: nam='db file sequential read' ela= 4824 file#=47 block#=3654297 blocks=1 obj#=166421 tim=12499509289166
WAIT #7: nam='db file sequential read' ela= 2008 file#=47 block#=3652312 blocks=1 obj#=166421 tim=12499509291248
WAIT #7: nam='db file sequential read' ela= 1925 file#=47 block#=3654490 blocks=1 obj#=166421 tim=12499509293246
WAIT #7: nam='db file sequential read' ela= 2859 file#=47 block#=3648458 blocks=1 obj#=166421 tim=12499509296178
WAIT #7: nam='db file sequential read' ela= 1740 file#=47 block#=3648212 blocks=1 obj#=166421 tim=12499509297991
WAIT #7: nam='db file sequential read' ela= 2566 file#=47 block#=3648411 blocks=1 obj#=166421 tim=12499509300631
WAIT #7: nam='db file sequential read' ela= 50772 file#=5 block#=480749 blocks=1 obj#=166421 tim=12499509351477
WAIT #7: nam='db file sequential read' ela= 12928 file#=5 block#=477177 blocks=1 obj#=166421 tim=12499509364482
WAIT #7: nam='db file sequential read' ela= 11116 file#=5 block#=479412 blocks=1 obj#=166421 tim=12499509375672
WAIT #7: nam='db file sequential read' ela= 4803 file#=5 block#=483440 blocks=1 obj#=166421 tim=12499509380549
WAIT #7: nam='db file sequential read' ela= 6900 file#=5 block#=481454 blocks=1 obj#=166421 tim=12499509387522
Received ORADEBUG command 'event 10046 trace name context off' from process Unix process pid: 3983, image:
/u01/app/oracle/admin/SURV2/udump/surv2_ora_1545.trc
Oracle Database 10g Release 10.2.0.4.0 - Production
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db
System name: SunOS
Node name: prdfa001
Release: 5.10
Version: Generic_139556-08
Machine: i86pc
Instance name: SURV2
Redo thread mounted by this instance: 1
Oracle process number: 22
Unix process pid: 1545, image: oracle@prdfa001 (TNS V1-V3)
*** ACTION NAME:() 2010-09-09 23:20:13.485
*** MODULE NAME:(sqlplus@prdfa001 (TNS V1-V3)) 2010-09-09 23:20:13.485
*** SERVICE NAME:(SYS$USERS) 2010-09-09 23:20:13.485
*** SESSION ID:(290.697) 2010-09-09 23:20:13.485
===================================================
SYSTEM STATE
System global information:
processes: base 47819b480, size 300, cleanup 4781a5638
allocation: free sessions 47f1d6148, free calls 0
control alloc errors: 0 (process), 0 (session), 0 (call)
PMON latch cleanup depth: 0
seconds since PMON's last scan for dead processes: 20
system statistics:
1171 logons cumulative
19 logons current
89219 opened cursors cumulative
86 opened cursors current
15095069 user commits
5 user rollbacks
58632904 user calls
44023255 recursive calls
224311 recursive cpu usage
201424173 session logical reads
0 session stored procedure space
901812 CPU used when call started
995437 CPU used by this session
6814196 DB time
0 cluster wait time
22542300822 concurrency wait time
3095 application wait time
16479074661 user I/O wait time
1284052668 session connect time
1284067190 process last non-idle time
189018343568 session uga memory
1249667216 session uga memory max
26059216 messages sent
26059220 messages received
239739 background timeouts
162399896 session pga memory
189662872 session pga memory max
4 enqueue timeouts
901146 enqueue waits
0 enqueue deadlocks
32122711 enqueue requests
17819 enqueue conversions
32122676 enqueue releases
0 global enqueue gets sync
0 global enqueue gets async
0 global enqueue get time
0 global enqueue releases
2865667 physical read total IO requests
262620 physical read total multi block requests
270093476864 physical read total bytes
select SYS_CONTEXT('USERENV', 'SERVER_HOST'), SYS_CONTEXT('USERENV', 'DB_UNIQUE_NAME'), SYS_CONTEXT('USERENV', 'INSTANCE_NAME'), SYS_CONTEXT('USERENV', 'SERVICE_NAME'), INSTANCE_NUMBER, STARTUP_TIME, SYS_CONTEXT('USERENV', 'DB_DOMAIN') from v$instance where INSTANCE_NAME=SYS_CONTEXT('USERENV', 'INSTANCE_NAME')
hash=550c95f3d0cfa8290e60ea8382d3a2ca timestamp=09-09-2010 04:24:19
namespace=CRSR flags=RON/KGHP/TIM/PN0/LRG/KST/DBN/MTX/[100100d1]
kkkk-dddd-llll=0000-0001-0001 lock=N pin=0 latch#=9 hpc=0582 hlc=0582
lwt=47df576e8[47df576e8,47df576e8] ltm=47df576f8[47df576f8,47df576f8]
pwt=47df576b0[47df576b0,47df576b0] ptm=47df576c0[47df576c0,47df576c0]
ref=47df57718[47df57718,47df57718] lnd=47df57730[47df57730,47df57730]
LIBRARY OBJECT: object=471ee1d38
type=CRSR flags=EXS[0001] pflags=[0000] status=VALD load=0
CHILDREN: size=16
child# table reference handle
0 471ee1800 471ee1470 47df7dce0
DATA BLOCKS:
data# heap pointer status pins change whr
0 47df7de48 471ee1e50 I/P/A/-/- 0 NONE 00
SO: 473691d60, type: 53, owner: 47924e810, flag: INIT/-/-/0x00
LIBRARY OBJECT LOCK: lock=473691d60 handle=47bb22fa0 mode=N
call pin=0 session pin=0 hpc=0000 hlc=0000
htl=473691de0[4735dbcb8,476cfbf58] htb=476cfbf58 ssga=476cfb6a0
user=47924e810 session=47f2310f0 count=1 flags=[0000] savepoint=0x0
LIBRARY OBJECT HANDLE: handle=47bb22fa0 mtx=47bb230d0(0) cdp=0
namespace=CRSR flags=RON/KGHP/PN0/EXP/[10010100]
kkkk-dddd-llll=0000-0001-0001 lock=N pin=0 latch#=3 hpc=fd84 hlc=fd84
lwt=47bb23048[47bb23048,47bb23048] ltm=47bb23058[47bb23058,47bb23058]
pwt=47bb23010[47bb23010,47bb23010] ptm=47bb23020[47bb23020,47bb23020]
ref=47bb23078[472f8de18,472f8de18] lnd=47bb23090[47bb23090,47bb23090]
LIBRARY OBJECT: object=472f8d9d8
type=CRSR flags=EXS[0001] pflags=[0000] status=VALD load=0
DEPENDENCIES: count=1 size=16
AUTHORIZATIONS: count=1 size=16 minimum entrysize=16
ACCESSES: count=1 size=16
TRANSLATIONS: count=1 size=16
DATA BLOCKS:
data# heap pointer status pins change whr
0 47bb22ee0 472f8daf0 I/P/A/-/- 0 NONE 00
6 472f8e508 46be86250 I/-/A/-/E 0 NONE 00
SO: 4735dbc38, type: 53, owner: 47924e810, flag: INIT/-/-/0x00
LIBRARY OBJECT LOCK: lock=4735dbc38 handle=47bb231c8 mode=N
call pin=0 session pin=0 hpc=0000 hlc=0000
htl=4735dbcb8[476cfbf58,473691de0] htb=476cfbf58 ssga=476cfb6a0
user=47924e810 session=47f2310f0 count=1 flags=[0000] savepoint=0x4c894f8b
LIBRARY OBJECT HANDLE: handle=47bb231c8 mtx=47bb232f8(1) cdp=1
name=select value$ from props$ where name = 'GLOBAL_DB_NAME'
hash=4bb432d65c5a391a42a5c3fa74472c7a timestamp=09-09-2010 04:24:12
namespace=CRSR flags=RON/KGHP/TIM/PN0/SML/KST/DBN/MTX/[120100d0]
kkkk-dddd-llll=0000-0001-0001 lock=N pin=0 latch#=3 hpc=0584 hlc=0584
lwt=47bb23270[47bb23270,47bb23270] ltm=47bb23280[47bb23280,47bb23280]
pwt=47bb23238[47bb23238,47bb23238] ptm=47bb23248[47bb23248,47bb23248]
ref=47bb232a0[47bb232a0,47bb232a0] lnd=47bb232b8[47bb232b8,47bb232b8]
LIBRARY OBJECT: object=472f8e6e0
type=CRSR flags=EXS[0001] pflags=[0000] status=VALD load=0
CHILDREN: size=16
child# table reference handle
0 472f8e1a8 472f8de18 47bb22fa0
DATA BLOCKS:
data# heap pointer status pins change whr
0 47bb23108 472f8e7f8 I/P/A/-/- 0 NONE 00
SO: 473644348, type: 53, owner: 47924e810, flag: INIT/-/-/0x00
LIBRARY OBJECT LOCK: lock=473644348 handle=47bbde418 mode=N
call pin=0 session pin=0 hpc=0000 hlc=0000
htl=4736443c8[476cfc0b8,476cfc0b8] htb=476cfc0b8 ssga=476cfb6a0
user=47924e810 session=47924e810 count=1 flags=[0000] savepoint=0x4c894f8b
LIBRARY OBJECT HANDLE: handle=47bbde418 mtx=47bbde548(0) cdp=0
name=ALTER SESSION SET TIME_ZONE='+02:00'
hash=3878dff8839e71e3dd05a2e75fbd6390 timestamp=09-09-2010 04:24:04
namespace=CRSR flags=RON/KGHP/TIM/PN0/SML/DBN/[12010040]
kkkk-dddd-llll=0000-0001-0001 lock=N pin=0 latch#=11 hpc=04e8 hlc=04e8
lwt=47bbde4c0[47bbde4c0,47bbde4c0] ltm=47bbde4d0[47bbde4d0,47bbde4d0]
pwt=47bbde488[47bbde488,47bbde488] ptm=47bbde498[47bbde498,47bbde498]
ref=47bbde4f0[47bbde4f0,47bbde4f0] lnd=47bbde508[47bbde508,47bbde508]
LIBRARY OBJECT: object=472fffc08
type=CRSR flags=EXS[0001] pflags=[0000] status=VALD load=0
DATA BLOCKS:
data# heap pointer status pins change whr
0 47bbde320 472fffd20 I/P/A/-/- 0 NONE 00
SO: 47aecf9e8, type: 41, owner: 47924e810, flag: INIT/-/-/0x00
(dummy) nxc=0, nlb=0
SO: 47f290540, type: 11, owner: 4781a7dc0, flag: INIT/-/-/0x00
(broadcast handle) flag: (2) ACTIVE SUBSCRIBER, owner: 4781a7dc0,
event: 1132, last message event: 1132,
last message waited event: 1132, next message: 0(0), messages read: 0
channel: (47a2df4f8) system events broadcast channel
scope: 2, event: 1132, last mesage event: 18,
publishers/subscribers: 0/17,
messages published: 1
SO: 47826b228, type: 3, owner: 4781a7dc0, flag: INIT/-/-/0x00
(call) sess: cur 47924e810, rec 0, usr 47924e810; depth: 0
SO: 476c52968, type: 16, owner: 4781a7dc0, flag: INIT/-/-/0x00
(osp req holder)
PSEUDO PROCESS for group DEFAULT:
SO: 47a1eb7d0, type: 2, owner: 0, flag: INIT/-/-/0x00
(process) Oracle pid=0, calls cur/top: 0/0, flag: (20) PSEUDO
int error: 0, call error: 0, sess error: 0, txn error 0
(post info) last post received: 0 0 0
last post received-location: No post
last process to post me: none
last post sent: 0 0 0
last post sent-location: No post
last process posted by me: none
(latch info) wait_event=0 bits=0
Process Group: DEFAULT, pseudo proc: 47a1eb7d0
O/S info: user: , term: , ospid: (DEAD)
OSD pid info: Unix process pid: 0, image: PSEUDO
Dump of memory from 0x00000004791BF538 to 0x00000004791BF740
4791BF530 00000000 00000000 [........]
4791BF540 00000000 00000000 00000000 00000000 [................]
Repeat 31 times
NO DETACHED BRANCHES.
NO DETACHED NETWORK CONNECTIONS.
CLEANUP STATE OBJECTS:
SO: 47f0cd038, type: 1, owner: 0, flag: INIT/-/-/0x00
(cleanup state object) description: instance enqueue anchor state
latch: 0x380009890
SO: 4782cf080, type: 5, owner: 47f0cd038, flag: INIT/-/-/0x00
(enqueue) TA-00000006-00000001 DID: 0001-000F-0000000B
lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res_flag: 0x2
res: 0x47a28d020, mode: X, lock_flag: 0x0
own: 0x0, sess: 0x0, prv: 0x47a28d030
SO: 47f0cd098, type: 1, owner: 0, flag: INIT/-/-/0x00
(cleanup state object) description: switchable channel handle anch
latch: 0x38000ac98
SO: 47f28f868, type: 11, owner: 47f0cd098, flag: INIT/-/-/0x00
(broadcast handle) flag: (c2) ACTIVE SUBSCRIBER, owner: 0,
event: 1, last message event: 1,
last message waited event: 1, next message: 0(0), messages read: 0
channel: (47a2e4190) KPON channel
scope: 2, event: 1, last mesage event: 0,
publishers/subscribers: 0/1,
messages published: 0
SO: 47f0cd0f8, type: 1, owner: 0, flag: INIT/-/-/0x00
(cleanup state object) description: TT shared object cleanup SO
latch: 0x38001c6b8
SO: 47f0cd158, type: 1, owner: 0, flag: INIT/-/-/0x00
(cleanup state object) description: SS shared object cleanup SO
latch: 0x38001cd48
END OF SYSTEM STATE
Top 5 Timed Events Avg %Total
~~~~~~~~~~~~~~~~~~ wait Call
Event Waits Time (s) (ms) Time Wait Class
db file sequential read 2,347,652 9,215 4 64.5 User I/O
db file scattered read 245,687 4,199 17 29.4 User I/O
CPU time 974 6.8
db file parallel write 50,082 408 8 2.9 System I/O
log file parallel write 6,963 52 7 0.4 System I/O
Time Model Statistics DB/Inst: SURV2/SURV2 Snaps: 19172-19178
-> Total time in database user-calls (DB Time): 14286.4s
-> Statistics including the word "background" measure background process
time, and so do not contribute to the DB time statistic
-> Ordered by % or DB time desc, Statistic name
Statistic Name Time (s) % of DB Time
sql execute elapsed time 14,280.3 100.0
DB CPU 974.5 6.8
PL/SQL execution elapsed time 531.8 3.7
parse time elapsed 30.5 .2
hard parse elapsed time 27.1 .2
connection management call elapsed time 14.9 .1
hard parse (sharing criteria) elapsed time 3.4 .0
hard parse (bind mismatch) elapsed time 3.1 .0
PL/SQL compilation elapsed time 2.4 .0
failed parse elapsed time 0.0 .0
repeated bind elapsed time 0.0 .0
sequence load elapsed time 0.0 .0
DB time 14,286.4 N/A
background elapsed time 670.2 N/A
background cpu time 186.1 N/A
Wait Class DB/Inst: SURV2/SURV2 Snaps: 19172-19178
-> s - second
-> cs - centisecond - 100th of a second
-> ms - millisecond - 1000th of a second
-> us - microsecond - 1000000th of a second
-> ordered by wait time desc, waits desc
Avg
%Time Total Wait wait Waits
Wait Class Waits -outs Time (s) (ms) /txn
User I/O 2,593,484 .0 13,415 5 150.0
System I/O 87,506 .0 515 6 5.1
Other 839 11.4 6 7 0.0
Commit 3,225 .1 6 2 0.2
Concurrency 1,033 .0 5 5 0.1
Configuration 2,514 99.4 0 0 0.1
Network 47,559 .0 0 0 2.8
Application 7 .0 0 0 0.0
Wait Events DB/Inst: SURV2/SURV2 Snaps: 19172-19178
-> s - second
-> cs - centisecond - 100th of a second
-> ms - millisecond - 1000th of a second
-> us - microsecond - 1000000th of a second
-> ordered by wait time desc, waits desc (idle events last)
Avg
%Time Total Wait wait Waits
Event Waits -outs Time (s) (ms) /txn
db file sequential read 2,347,652 .0 9,215 4 135.8
db file scattered read 245,687 .0 4,199 17 14.2
db file parallel write 50,082 .0 408 8 2.9
log file parallel write 6,963 .0 52 7 0.4
control file parallel write 6,203 .0 44 7 0.4
control file sequential read 24,242 .0 11 0 1.4
log file sync 3,225 .1 6 2 0.2
latch free 84 .0 4 47 0.0
os thread startup 25 .0 3 120 0.0
latch: session allocation 39 .0 1 33 0.0
db file parallel read 12 .0 1 92 0.0
enq: TX - index contention 186 .0 1 3 0.0
latch: shared pool 47 .0 1 11 0.0
LGWR wait for redo copy 319 3.1 0 1 0.0
library cache load lock 2 .0 0 172 0.0
buffer busy waits 590 .0 0 0 0.0
log file switch completion 6 .0 0 29 0.0
SGA: allocation forcing comp 11 54.5 0 14 0.0
latch: library cache lock 50 .0 0 3 0.0
read by other session 38 .0 0 4 0.0
direct path read 42 .0 0 3 0.0
SQL*Net message to client 44,807 .0 0 0 2.6
rdbms ipc reply 207 .0 0 0 0.0
SQL*Net more data from clien 1,014 .0 0 0 0.1
latch: cache buffers chains 24 .0 0 1 0.0
latch: library cache 29 .0 0 1 0.0
log file sequential read 8 .0 0 3 0.0
direct path write 50 .0 0 0 0.0
SQL*Net more data to client 398 .0 0 0 0.0
latch: object queue header o 12 .0 0 1 0.0
latch: In memory undo latch 78 .0 0 0 0.0
undo segment extension 2,507 99.7 0 0 0.1
latch: cache buffers lru cha 4 .0 0 1 0.0
log file single write 8 .0 0 0 0.0
local write wait 3 .0 0 1 0.0
enq: RO - fast object reuse 3 .0 0 1 0.0
buffer deadlock 87 92.0 0 0 0.0
enq: JS - queue lock 1 .0 0 1 0.0
cursor: pin S 70 .0 0 0 0.0
latch: row cache objects 2 .0 0 1 0.0
SQL*Net message to dblink 1,338 .0 0 0 0.1
latch: checkpoint queue latc 2 .0 0 0 0.0
reliable message 3 .0 0 0 0.0
log buffer space 1 .0 0 1 0.0
SQL*Net break/reset to clien 4 .0 0 0 0.0
SQL*Net more data from dblin 2 .0 0 0 0.0
SQL*Net message from client 44,949 .0 155,701 3464 2.6
virtual circuit status 621 100.0 18,156 29237 0.0
Streams AQ: qmn slave idle w 664 .0 18,127 27299 0.0
Streams AQ: qmn coordinator 1,339 50.4 18,099 13517 0.1
Streams AQ: waiting for time 12 100.0 8,741 728394 0.0
jobq slave wait 130 100.0 380 2927 0.0
PL/SQL lock timer 1 100.0 1 978 0.0
SQL*Net message from dblink 1,338 .0 0 0 0.1
single-task message 1 .0 0 38 0.0
class slave wait 11 .0 0 1 0.0
SQL ordered by Elapsed Time DB/Inst: SURV2/SURV2 Snaps: 19172-19178
-> Resources reported for PL/SQL code includes the resources used by all SQL
statements called by the code.
-> % Total DB Time is the Elapsed Time of the SQL statement divided
into the Total Database Time multiplied by 100
Elapsed CPU Elap per % Total
Time (s) Time (s) Executions Exec (s) DB Time SQL Id
13,664 906 0 N/A 95.6 gr2cx6athc5j5
Module: SQL*Plus
BEGIN DBMS_OUTPUT.PUT_LINE(equiduct.eod(NULL,NULL)); END;
8,792 195 0 N/A 61.5 986fzxtzr52u5
Module: SQL*Plus
UPDATE TIBEX_ORDER SET INSTRUMENTID=:"SYS_B_0" WHERE INSTRUMENTID=:"SYS_B_1"
2,524 368 1 2524.1 17.7 c4uf0x6hdgnwq
Module: SQL*Plus
UPDATE TIBEX_FIXSESSIONSTATE SET INSTRUMENTID=:"SYS_B_0" WHERE INSTRUMENTID=:"
SYS_B_1"
1,414 177 1 1414.4 9.9 cbg09ma34kq8w
Module: SQL*Plus
SELECT count(*) FROM TIBEX_ORDER WHERE INSTRUMENTID=:"SYS_B_0"
742 137 1 742.2 5.2 g0sg6v994wssq
Module: SQL*Plus
SELECT count(*) FROM TIBEX_FIXSESSIONSTATE WHERE INSTRUMENTID=:"SYS_B_0"
274 11 1 274.2 1.9 6mcpb06rctk0x
Module: DBMS_SCHEDULER
call dbms_space.auto_space_advisor_job_proc ( )
264 8 27 9.8 1.8 8szmwam7fysa3
Module: DBMS_SCHEDULER
insert into wri$_adv_objspace_trend_data select timepoint, space_usage, space_a
lloc, quality from table(dbms_space.object_growth_trend(:1, :2, :3, :4, NULL, N
ULL, NULL, 'FALSE', :5, 'FALSE'))
99 1 1 99.4 0.7 1z0x41f66nvjr
Module: SQL*Plus
UPDATE TIBEX_INSTRUMENTADMIN SET INSTRUMENTID=:"SYS_B_0" WHERE INSTRUMENTID=:"
SYS_B_1"
21 10 1 21.5 0.2 bbc1ck8594kvj
Module: SQL*Plus
UPDATE TIBEX_INSTRUMENTDAILYHIST SET ADJOPEN=NVL(ADJOPEN,OPEN), ADJHIGH=NVL(ADJH
IGH,HIGH), ADJLOW=NVL(ADJLOW,LOW), ADJMID=NVL(ADJMID,MID), ADJCLOSE=NVL(ADJCLOSE
,CLOSE), ADJVOLUME=NVL(ADJVOLUME,VOLUME), ADJCLOSINGBID=NVL(ADJCLOSINGBID,CLOSIN
GBID), ADJCLOSINGOFFER=NVL(ADJCLOSINGOFFER,CLOSINGOFFER)
12 0 1 12.5 0.1 6xm9p9uy5kaap
Module: SQL*Plus
SELECT count(*) FROM TIBEX_INSTRUMENTSTATE WHERE INSTRUMENTID=:"SYS_B_0"
SQL ordered by CPU Time DB/Inst: SURV2/SURV2 Snaps: 19172-19178
-> Resources reported for PL/SQL code includes the resources used by all SQL
statements called by the code.
-> % Total DB Time is the Elapsed Time of the SQL statement divided
into the Total Database Time multiplied by 100
CPU Elapsed CPU per % Total
Time (s) Time (s) Executions Exec (s) DB Time SQL Id
906 13,664 0 N/A 95.6 gr2cx6athc5j5
Module: SQL*Plus
BEGIN DBMS_OUTPUT.PUT_LINE(equiduct.eod(NULL,NULL)); END;
368 2,524 1 367.51 17.7 c4uf0x6hdgnwq
Module: SQL*Plus
UPDATE TIBEX_FIXSESSIONSTATE SET INSTRUMENTID=:"SYS_B_0" WHERE INSTRUMENTID=:"
SYS_B_1"
195 8,792 0 N/A 61.5 986fzxtzr52u5
Module: SQL*Plus
UPDATE TIBEX_ORDER SET INSTRUMENTID=:"SYS_B_0" WHERE INSTRUMENTID=:"SYS_B_1"
177 1,414 1 176.93 9.9 cbg09ma34kq8w
Module: SQL*Plus
SELECT count(*) FROM TIBEX_ORDER WHERE INSTRUMENTID=:"SYS_B_0"
137 742 1 137.38 5.2 g0sg6v994wssq
Module: SQL*Plus
SELECT count(*) FROM TIBEX_FIXSESSIONSTATE WHERE INSTRUMENTID=:"SYS_B_0"
11 274 1 10.82 1.9 6mcpb06rctk0x
Module: DBMS_SCHEDULER
call dbms_space.auto_space_advisor_job_proc ( )
10 21 1 9.65 0.2 bbc1ck8594kvjEdited by: NM on 10-Sep-2010 07:39Hi,
Last night we had issue with one of the prod server where we updating one of table which contains large number records in millions.Same identical machine completed in1 hour and other box never completed but doing db file sequential read but in the long ops the last statement it was done 20:16 after that nothing is happening but i ran few trace on that user.
/u01/app/oracle/admin/SURV2/udump/surv2_ora_10048.trc
Oracle Database 10g Release 10.2.0.4.0 - Production
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db
System name: SunOS
Node name: prdfa001
Release: 5.10
Version: Generic_139556-08
Machine: i86pc
Instance name: SURV2
Redo thread mounted by this instance: 1
Oracle process number: 18
Unix process pid: 10048, image: oracle@prdfa001
*** 2010-09-09 23:37:07.484
*** ACTION NAME:() 2010-09-09 23:37:07.473
*** MODULE NAME:(SQL*Plus) 2010-09-09 23:37:07.473
*** SERVICE NAME:(SURV2) 2010-09-09 23:37:07.473
*** SESSION ID:(289.54) 2010-09-09 23:37:07.473
Received ORADEBUG command 'unlimit' from process Unix process pid: 3983, image:
*** 2010-09-09 23:37:20.315
Received ORADEBUG command 'event 10046 trace name context forever, level 12' from process Unix process pid: 3983, image:
WAIT #7: nam='db file sequential read' ela= 11160 file#=13 block#=2252349 blocks=1 obj#=166421 tim=12499462835161
WAIT #7: nam='db file sequential read' ela= 2857 file#=13 block#=2249751 blocks=1 obj#=166421 tim=12499462838137
WAIT #7: nam='db file sequential read' ela= 3810 file#=13 block#=2251361 blocks=1 obj#=166421 tim=12499462842048
WAIT #7: nam='db file sequential read' ela= 4459 file#=13 block#=2247059 blocks=1 obj#=166421 tim=12499462846564
WAIT #7: nam='db file sequential read' ela= 2841 file#=13 block#=2247507 blocks=1 obj#=166421 tim=12499462849468
WAIT #7: nam='db file sequential read' ela= 427 file#=13 block#=2247568 blocks=1 obj#=166421 tim=12499462850032
WAIT #7: nam='db file sequential read' ela= 1187 file#=13 block#=2248264 blocks=1 obj#=166421 tim=12499462851327
WAIT #7: nam='db file sequential read' ela= 2687 file#=13 block#=2250707 blocks=1 obj#=166421 tim=12499462854178
WAIT #7: nam='db file sequential read' ela= 3657 file#=13 block#=2249697 blocks=1 obj#=166421 tim=12499462857896
WAIT #7: nam='db file sequential read' ela= 4139 file#=13 block#=2247074 blocks=1 obj#=166421 tim=12499462862093
WAIT #7: nam='db file sequential read' ela= 4180 file#=47 block#=3649690 blocks=1 obj#=166421 tim=12499509270445
WAIT #7: nam='db file sequential read' ela= 4802 file#=47 block#=3649309 blocks=1 obj#=166421 tim=12499509275327
WAIT #7: nam='db file sequential read' ela= 2459 file#=47 block#=3652697 blocks=1 obj#=166421 tim=12499509277859
WAIT #7: nam='db file sequential read' ela= 4015 file#=47 block#=3652826 blocks=1 obj#=166421 tim=12499509281948
WAIT #7: nam='db file sequential read' ela= 2248 file#=47 block#=3651610 blocks=1 obj#=166421 tim=12499509284269
WAIT #7: nam='db file sequential read' ela= 4824 file#=47 block#=3654297 blocks=1 obj#=166421 tim=12499509289166
WAIT #7: nam='db file sequential read' ela= 2008 file#=47 block#=3652312 blocks=1 obj#=166421 tim=12499509291248
WAIT #7: nam='db file sequential read' ela= 1925 file#=47 block#=3654490 blocks=1 obj#=166421 tim=12499509293246
WAIT #7: nam='db file sequential read' ela= 2859 file#=47 block#=3648458 blocks=1 obj#=166421 tim=12499509296178
WAIT #7: nam='db file sequential read' ela= 1740 file#=47 block#=3648212 blocks=1 obj#=166421 tim=12499509297991
WAIT #7: nam='db file sequential read' ela= 2566 file#=47 block#=3648411 blocks=1 obj#=166421 tim=12499509300631
WAIT #7: nam='db file sequential read' ela= 50772 file#=5 block#=480749 blocks=1 obj#=166421 tim=12499509351477
WAIT #7: nam='db file sequential read' ela= 12928 file#=5 block#=477177 blocks=1 obj#=166421 tim=12499509364482
WAIT #7: nam='db file sequential read' ela= 11116 file#=5 block#=479412 blocks=1 obj#=166421 tim=12499509375672
WAIT #7: nam='db file sequential read' ela= 4803 file#=5 block#=483440 blocks=1 obj#=166421 tim=12499509380549
WAIT #7: nam='db file sequential read' ela= 6900 file#=5 block#=481454 blocks=1 obj#=166421 tim=12499509387522
Received ORADEBUG command 'event 10046 trace name context off' from process Unix process pid: 3983, image:
/u01/app/oracle/admin/SURV2/udump/surv2_ora_1545.trc
Oracle Database 10g Release 10.2.0.4.0 - Production
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db
System name: SunOS
Node name: prdfa001
Release: 5.10
Version: Generic_139556-08
Machine: i86pc
Instance name: SURV2
Redo thread mounted by this instance: 1
Oracle process number: 22
Unix process pid: 1545, image: oracle@prdfa001 (TNS V1-V3)
*** ACTION NAME:() 2010-09-09 23:20:13.485
*** MODULE NAME:(sqlplus@prdfa001 (TNS V1-V3)) 2010-09-09 23:20:13.485
*** SERVICE NAME:(SYS$USERS) 2010-09-09 23:20:13.485
*** SESSION ID:(290.697) 2010-09-09 23:20:13.485
===================================================
SYSTEM STATE
System global information:
processes: base 47819b480, size 300, cleanup 4781a5638
allocation: free sessions 47f1d6148, free calls 0
control alloc errors: 0 (process), 0 (session), 0 (call)
PMON latch cleanup depth: 0
seconds since PMON's last scan for dead processes: 20
system statistics:
1171 logons cumulative
19 logons current
89219 opened cursors cumulative
86 opened cursors current
15095069 user commits
5 user rollbacks
58632904 user calls
44023255 recursive calls
224311 recursive cpu usage
201424173 session logical reads
0 session stored procedure space
901812 CPU used when call started
995437 CPU used by this session
6814196 DB time
0 cluster wait time
22542300822 concurrency wait time
3095 application wait time
16479074661 user I/O wait time
1284052668 session connect time
1284067190 process last non-idle time
189018343568 session uga memory
1249667216 session uga memory max
26059216 messages sent
26059220 messages received
239739 background timeouts
162399896 session pga memory
189662872 session pga memory max
4 enqueue timeouts
901146 enqueue waits
0 enqueue deadlocks
32122711 enqueue requests
17819 enqueue conversions
32122676 enqueue releases
0 global enqueue gets sync
0 global enqueue gets async
0 global enqueue get time
0 global enqueue releases
2865667 physical read total IO requests
262620 physical read total multi block requests
270093476864 physical read total bytes
select SYS_CONTEXT('USERENV', 'SERVER_HOST'), SYS_CONTEXT('USERENV', 'DB_UNIQUE_NAME'), SYS_CONTEXT('USERENV', 'INSTANCE_NAME'), SYS_CONTEXT('USERENV', 'SERVICE_NAME'), INSTANCE_NUMBER, STARTUP_TIME, SYS_CONTEXT('USERENV', 'DB_DOMAIN') from v$instance where INSTANCE_NAME=SYS_CONTEXT('USERENV', 'INSTANCE_NAME')
hash=550c95f3d0cfa8290e60ea8382d3a2ca timestamp=09-09-2010 04:24:19
namespace=CRSR flags=RON/KGHP/TIM/PN0/LRG/KST/DBN/MTX/[100100d1]
kkkk-dddd-llll=0000-0001-0001 lock=N pin=0 latch#=9 hpc=0582 hlc=0582
lwt=47df576e8[47df576e8,47df576e8] ltm=47df576f8[47df576f8,47df576f8]
pwt=47df576b0[47df576b0,47df576b0] ptm=47df576c0[47df576c0,47df576c0]
ref=47df57718[47df57718,47df57718] lnd=47df57730[47df57730,47df57730]
LIBRARY OBJECT: object=471ee1d38
type=CRSR flags=EXS[0001] pflags=[0000] status=VALD load=0
CHILDREN: size=16
child# table reference handle
0 471ee1800 471ee1470 47df7dce0
DATA BLOCKS:
data# heap pointer status pins change whr
0 47df7de48 471ee1e50 I/P/A/-/- 0 NONE 00
SO: 473691d60, type: 53, owner: 47924e810, flag: INIT/-/-/0x00
LIBRARY OBJECT LOCK: lock=473691d60 handle=47bb22fa0 mode=N
call pin=0 session pin=0 hpc=0000 hlc=0000
htl=473691de0[4735dbcb8,476cfbf58] htb=476cfbf58 ssga=476cfb6a0
user=47924e810 session=47f2310f0 count=1 flags=[0000] savepoint=0x0
LIBRARY OBJECT HANDLE: handle=47bb22fa0 mtx=47bb230d0(0) cdp=0
namespace=CRSR flags=RON/KGHP/PN0/EXP/[10010100]
kkkk-dddd-llll=0000-0001-0001 lock=N pin=0 latch#=3 hpc=fd84 hlc=fd84
lwt=47bb23048[47bb23048,47bb23048] ltm=47bb23058[47bb23058,47bb23058]
pwt=47bb23010[47bb23010,47bb23010] ptm=47bb23020[47bb23020,47bb23020]
ref=47bb23078[472f8de18,472f8de18] lnd=47bb23090[47bb23090,47bb23090]
LIBRARY OBJECT: object=472f8d9d8
type=CRSR flags=EXS[0001] pflags=[0000] status=VALD load=0
DEPENDENCIES: count=1 size=16
AUTHORIZATIONS: count=1 size=16 minimum entrysize=16
ACCESSES: count=1 size=16
TRANSLATIONS: count=1 size=16
DATA BLOCKS:
data# heap pointer status pins change whr
0 47bb22ee0 472f8daf0 I/P/A/-/- 0 NONE 00
6 472f8e508 46be86250 I/-/A/-/E 0 NONE 00
SO: 4735dbc38, type: 53, owner: 47924e810, flag: INIT/-/-/0x00
LIBRARY OBJECT LOCK: lock=4735dbc38 handle=47bb231c8 mode=N
call pin=0 session pin=0 hpc=0000 hlc=0000
htl=4735dbcb8[476cfbf58,473691de0] htb=476cfbf58 ssga=476cfb6a0
user=47924e810 session=47f2310f0 count=1 flags=[0000] savepoint=0x4c894f8b
LIBRARY OBJECT HANDLE: handle=47bb231c8 mtx=47bb232f8(1) cdp=1
name=select value$ from props$ where name = 'GLOBAL_DB_NAME'
hash=4bb432d65c5a391a42a5c3fa74472c7a timestamp=09-09-2010 04:24:12
namespace=CRSR flags=RON/KGHP/TIM/PN0/SML/KST/DBN/MTX/[120100d0]
kkkk-dddd-llll=0000-0001-0001 lock=N pin=0 latch#=3 hpc=0584 hlc=0584
lwt=47bb23270[47bb23270,47bb23270] ltm=47bb23280[47bb23280,47bb23280]
pwt=47bb23238[47bb23238,47bb23238] ptm=47bb23248[47bb23248,47bb23248]
ref=47bb232a0[47bb232a0,47bb232a0] lnd=47bb232b8[47bb232b8,47bb232b8]
LIBRARY OBJECT: object=472f8e6e0
type=CRSR flags=EXS[0001] pflags=[0000] status=VALD load=0
CHILDREN: size=16
child# table reference handle
0 472f8e1a8 472f8de18 47bb22fa0
DATA BLOCKS:
data# heap pointer status pins change whr
0 47bb23108 472f8e7f8 I/P/A/-/- 0 NONE 00
SO: 473644348, type: 53, owner: 47924e810, flag: INIT/-/-/0x00
LIBRARY OBJECT LOCK: lock=473644348 handle=47bbde418 mode=N
call pin=0 session pin=0 hpc=0000 hlc=0000
htl=4736443c8[476cfc0b8,476cfc0b8] htb=476cfc0b8 ssga=476cfb6a0
user=47924e810 session=47924e810 count=1 flags=[0000] savepoint=0x4c894f8b
LIBRARY OBJECT HANDLE: handle=47bbde418 mtx=47bbde548(0) cdp=0
name=ALTER SESSION SET TIME_ZONE='+02:00'
hash=3878dff8839e71e3dd05a2e75fbd6390 timestamp=09-09-2010 04:24:04
namespace=CRSR flags=RON/KGHP/TIM/PN0/SML/DBN/[12010040]
kkkk-dddd-llll=0000-0001-0001 lock=N pin=0 latch#=11 hpc=04e8 hlc=04e8
lwt=47bbde4c0[47bbde4c0,47bbde4c0] ltm=47bbde4d0[47bbde4d0,47bbde4d0]
pwt=47bbde488[47bbde488,47bbde488] ptm=47bbde498[47bbde498,47bbde498]
ref=47bbde4f0[47bbde4f0,47bbde4f0] lnd=47bbde508[47bbde508,47bbde508]
LIBRARY OBJECT: object=472fffc08
type=CRSR flags=EXS[0001] pflags=[0000] status=VALD load=0
DATA BLOCKS:
data# heap pointer status pins change whr
0 47bbde320 472fffd20 I/P/A/-/- 0 NONE 00
SO: 47aecf9e8, type: 41, owner: 47924e810, flag: INIT/-/-/0x00
(dummy) nxc=0, nlb=0
SO: 47f290540, type: 11, owner: 4781a7dc0, flag: INIT/-/-/0x00
(broadcast handle) flag: (2) ACTIVE SUBSCRIBER, owner: 4781a7dc0,
event: 1132, last message event: 1132,
last message waited event: 1132, next message: 0(0), messages read: 0
channel: (47a2df4f8) system events broadcast channel
scope: 2, event: 1132, last mesage event: 18,
publishers/subscribers: 0/17,
messages published: 1
SO: 47826b228, type: 3, owner: 4781a7dc0, flag: INIT/-/-/0x00
(call) sess: cur 47924e810, rec 0, usr 47924e810; depth: 0
SO: 476c52968, type: 16, owner: 4781a7dc0, flag: INIT/-/-/0x00
(osp req holder)
PSEUDO PROCESS for group DEFAULT:
SO: 47a1eb7d0, type: 2, owner: 0, flag: INIT/-/-/0x00
(process) Oracle pid=0, calls cur/top: 0/0, flag: (20) PSEUDO
int error: 0, call error: 0, sess error: 0, txn error 0
(post info) last post received: 0 0 0
last post received-location: No post
last process to post me: none
last post sent: 0 0 0
last post sent-location: No post
last process posted by me: none
(latch info) wait_event=0 bits=0
Process Group: DEFAULT, pseudo proc: 47a1eb7d0
O/S info: user: , term: , ospid: (DEAD)
OSD pid info: Unix process pid: 0, image: PSEUDO
Dump of memory from 0x00000004791BF538 to 0x00000004791BF740
4791BF530 00000000 00000000 [........]
4791BF540 00000000 00000000 00000000 00000000 [................]
Repeat 31 times
NO DETACHED BRANCHES.
NO DETACHED NETWORK CONNECTIONS.
CLEANUP STATE OBJECTS:
SO: 47f0cd038, type: 1, owner: 0, flag: INIT/-/-/0x00
(cleanup state object) description: instance enqueue anchor state
latch: 0x380009890
SO: 4782cf080, type: 5, owner: 47f0cd038, flag: INIT/-/-/0x00
(enqueue) TA-00000006-00000001 DID: 0001-000F-0000000B
lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res_flag: 0x2
res: 0x47a28d020, mode: X, lock_flag: 0x0
own: 0x0, sess: 0x0, prv: 0x47a28d030
SO: 47f0cd098, type: 1, owner: 0, flag: INIT/-/-/0x00
(cleanup state object) description: switchable channel handle anch
latch: 0x38000ac98
SO: 47f28f868, type: 11, owner: 47f0cd098, flag: INIT/-/-/0x00
(broadcast handle) flag: (c2) ACTIVE SUBSCRIBER, owner: 0,
event: 1, last message event: 1,
last message waited event: 1, next message: 0(0), messages read: 0
channel: (47a2e4190) KPON channel
scope: 2, event: 1, last mesage event: 0,
publishers/subscribers: 0/1,
messages published: 0
SO: 47f0cd0f8, type: 1, owner: 0, flag: INIT/-/-/0x00
(cleanup state object) description: TT shared object cleanup SO
latch: 0x38001c6b8
SO: 47f0cd158, type: 1, owner: 0, flag: INIT/-/-/0x00
(cleanup state object) description: SS shared object cleanup SO
latch: 0x38001cd48
END OF SYSTEM STATE
Top 5 Timed Events Avg %Total
~~~~~~~~~~~~~~~~~~ wait Call
Event Waits Time (s) (ms) Time Wait Class
db file sequential read 2,347,652 9,215 4 64.5 User I/O
db file scattered read 245,687 4,199 17 29.4 User I/O
CPU time 974 6.8
db file parallel write 50,082 408 8 2.9 System I/O
log file parallel write 6,963 52 7 0.4 System I/O
Time Model Statistics DB/Inst: SURV2/SURV2 Snaps: 19172-19178
-> Total time in database user-calls (DB Time): 14286.4s
-> Statistics including the word "background" measure background process
time, and so do not contribute to the DB time statistic
-> Ordered by % or DB time desc, Statistic name
Statistic Name Time (s) % of DB Time
sql execute elapsed time 14,280.3 100.0
DB CPU 974.5 6.8
PL/SQL execution elapsed time 531.8 3.7
parse time elapsed 30.5 .2
hard parse elapsed time 27.1 .2
connection management call elapsed time 14.9 .1
hard parse (sharing criteria) elapsed time 3.4 .0
hard parse (bind mismatch) elapsed time 3.1 .0
PL/SQL compilation elapsed time 2.4 .0
failed parse elapsed time 0.0 .0
repeated bind elapsed time 0.0 .0
sequence load elapsed time 0.0 .0
DB time 14,286.4 N/A
background elapsed time 670.2 N/A
background cpu time 186.1 N/A
Wait Class DB/Inst: SURV2/SURV2 Snaps: 19172-19178
-> s - second
-> cs - centisecond - 100th of a second
-> ms - millisecond - 1000th of a second
-> us - microsecond - 1000000th of a second
-> ordered by wait time desc, waits desc
Avg
%Time Total Wait wait Waits
Wait Class Waits -outs Time (s) (ms) /txn
User I/O 2,593,484 .0 13,415 5 150.0
System I/O 87,506 .0 515 6 5.1
Other 839 11.4 6 7 0.0
Commit 3,225 .1 6 2 0.2
Concurrency 1,033 .0 5 5 0.1
Configuration 2,514 99.4 0 0 0.1
Network 47,559 .0 0 0 2.8
Application 7 .0 0 0 0.0
Wait Events DB/Inst: SURV2/SURV2 Snaps: 19172-19178
-> s - second
-> cs - centisecond - 100th of a second
-> ms - millisecond - 1000th of a second
-> us - microsecond - 1000000th of a second
-> ordered by wait time desc, waits desc (idle events last)
Avg
%Time Total Wait wait Waits
Event Waits -outs Time (s) (ms) /txn
db file sequential read 2,347,652 .0 9,215 4 135.8
db file scattered read 245,687 .0 4,199 17 14.2
db file parallel write 50,082 .0 408 8 2.9
log file parallel write 6,963 .0 52 7 0.4
control file parallel write 6,203 .0 44 7 0.4
control file sequential read 24,242 .0 11 0 1.4
log file sync 3,225 .1 6 2 0.2
latch free 84 .0 4 47 0.0
os thread startup 25 .0 3 120 0.0
latch: session allocation 39 .0 1 33 0.0
db file parallel read 12 .0 1 92 0.0
enq: TX - index contention 186 .0 1 3 0.0
latch: shared pool 47 .0 1 11 0.0
LGWR wait for redo copy 319 3.1 0 1 0.0
library cache load lock 2 .0 0 172 0.0
buffer busy waits 590 .0 0 0 0.0
log file switch completion 6 .0 0 29 0.0
SGA: allocation forcing comp 11 54.5 0 14 0.0
latch: library cache lock 50 .0 0 3 0.0
read by other session 38 .0 0 4 0.0
direct path read 42 .0 0 3 0.0
SQL*Net message to client 44,807 .0 0 0 2.6
rdbms ipc reply 207 .0 0 0 0.0
SQL*Net more data from clien 1,014 .0 0 0 0.1
latch: cache buffers chains 24 .0 0 1 0.0
latch: library cache 29 .0 0 1 0.0
log file sequential read 8 .0 0 3 0.0
direct path write 50 .0 0 0 0.0
SQL*Net more data to client 398 .0 0 0 0.0
latch: object queue header o 12 .0 0 1 0.0
latch: In memory undo latch 78 .0 0 0 0.0
undo segment extension 2,507 99.7 0 0 0.1
latch: cache buffers lru cha 4 .0 0 1 0.0
log file single write 8 .0 0 0 0.0
local write wait 3 .0 0 1 0.0
enq: RO - fast object reuse 3 .0 0 1 0.0
buffer deadlock 87 92.0 0 0 0.0
enq: JS - queue lock 1 .0 0 1 0.0
cursor: pin S 70 .0 0 0 0.0
latch: row cache objects 2 .0 0 1 0.0
SQL*Net message to dblink 1,338 .0 0 0 0.1
latch: checkpoint queue latc 2 .0 0 0 0.0
reliable message 3 .0 0 0 0.0
log buffer space 1 .0 0 1 0.0
SQL*Net break/reset to clien 4 .0 0 0 0.0
SQL*Net more data from dblin 2 .0 0 0 0.0
SQL*Net message from client 44,949 .0 155,701 3464 2.6
virtual circuit status 621 100.0 18,156 29237 0.0
Streams AQ: qmn slave idle w 664 .0 18,127 27299 0.0
Streams AQ: qmn coordinator 1,339 50.4 18,099 13517 0.1
Streams AQ: waiting for time 12 100.0 8,741 728394 0.0
jobq slave wait 130 100.0 380 2927 0.0
PL/SQL lock timer 1 100.0 1 978 0.0
SQL*Net message from dblink 1,338 .0 0 0 0.1
single-task message 1 .0 0 38 0.0
class slave wait 11 .0 0 1 0.0
SQL ordered by Elapsed Time DB/Inst: SURV2/SURV2 Snaps: 19172-19178
-> Resources reported for PL/SQL code includes the resources used by all SQL
statements called by the code.
-> % Total DB Time is the Elapsed Time of the SQL statement divided
into the Total Database Time multiplied by 100
Elapsed CPU Elap per % Total
Time (s) Time (s) Executions Exec (s) DB Time SQL Id
13,664 906 0 N/A 95.6 gr2cx6athc5j5
Module: SQL*Plus
BEGIN DBMS_OUTPUT.PUT_LINE(equiduct.eod(NULL,NULL)); END;
8,792 195 0 N/A 61.5 986fzxtzr52u5
Module: SQL*Plus
UPDATE TIBEX_ORDER SET INSTRUMENTID=:"SYS_B_0" WHERE INSTRUMENTID=:"SYS_B_1"
2,524 368 1 2524.1 17.7 c4uf0x6hdgnwq
Module: SQL*Plus
UPDATE TIBEX_FIXSESSIONSTATE SET INSTRUMENTID=:"SYS_B_0" WHERE INSTRUMENTID=:"
SYS_B_1"
1,414 177 1 1414.4 9.9 cbg09ma34kq8w
Module: SQL*Plus
SELECT count(*) FROM TIBEX_ORDER WHERE INSTRUMENTID=:"SYS_B_0"
742 137 1 742.2 5.2 g0sg6v994wssq
Module: SQL*Plus
SELECT count(*) FROM TIBEX_FIXSESSIONSTATE WHERE INSTRUMENTID=:"SYS_B_0"
274 11 1 274.2 1.9 6mcpb06rctk0x
Module: DBMS_SCHEDULER
call dbms_space.auto_space_advisor_job_proc ( )
264 8 27 9.8 1.8 8szmwam7fysa3
Module: DBMS_SCHEDULER
insert into wri$_adv_objspace_trend_data select timepoint, space_usage, space_a
lloc, quality from table(dbms_space.object_growth_trend(:1, :2, :3, :4, NULL, N
ULL, NULL, 'FALSE', :5, 'FALSE'))
99 1 1 99.4 0.7 1z0x41f66nvjr
Module: SQL*Plus
UPDATE TIBEX_INSTRUMENTADMIN SET INSTRUMENTID=:"SYS_B_0" WHERE INSTRUMENTID=:"
SYS_B_1"
21 10 1 21.5 0.2 bbc1ck8594kvj
Module: SQL*Plus
UPDATE TIBEX_INSTRUMENTDAILYHIST SET ADJOPEN=NVL(ADJOPEN,OPEN), ADJHIGH=NVL(ADJH
IGH,HIGH), ADJLOW=NVL(ADJLOW,LOW), ADJMID=NVL(ADJMID,MID), ADJCLOSE=NVL(ADJCLOSE
,CLOSE), ADJVOLUME=NVL(ADJVOLUME,VOLUME), ADJCLOSINGBID=NVL(ADJCLOSINGBID,CLOSIN
GBID), ADJCLOSINGOFFER=NVL(ADJCLOSINGOFFER,CLOSINGOFFER)
12 0 1 12.5 0.1 6xm9p9uy5kaap
Module: SQL*Plus
SELECT count(*) FROM TIBEX_INSTRUMENTSTATE WHERE INSTRUMENTID=:"SYS_B_0"
SQL ordered by CPU Time DB/Inst: SURV2/SURV2 Snaps: 19172-19178
-> Resources reported for PL/SQL code includes the resources used by all SQL
statements called by the code.
-> % Total DB Time is the Elapsed Time of the SQL statement divided
into the Total Database Time multiplied by 100
CPU Elapsed CPU per % Total
Time (s) Time (s) Executions Exec (s) DB Time SQL Id
906 13,664 0 N/A 95.6 gr2cx6athc5j5
Module: SQL*Plus
BEGIN DBMS_OUTPUT.PUT_LINE(equiduct.eod(NULL,NULL)); END;
368 2,524 1 367.51 17.7 c4uf0x6hdgnwq
Module: SQL*Plus
UPDATE TIBEX_FIXSESSIONSTATE SET INSTRUMENTID=:"SYS_B_0" WHERE INSTRUMENTID=:"
SYS_B_1"
195 8,792 0 N/A 61.5 986fzxtzr52u5
Module: SQL*Plus
UPDATE TIBEX_ORDER SET INSTRUMENTID=:"SYS_B_0" WHERE INSTRUMENTID=:"SYS_B_1"
177 1,414 1 176.93 9.9 cbg09ma34kq8w
Module: SQL*Plus
SELECT count(*) FROM TIBEX_ORDER WHERE INSTRUMENTID=:"SYS_B_0"
137 742 1 137.38 5.2 g0sg6v994wssq
Module: SQL*Plus
SELECT count(*) FROM TIBEX_FIXSESSIONSTATE WHERE INSTRUMENTID=:"SYS_B_0"
11 274 1 10.82 1.9 6mcpb06rctk0x
Module: DBMS_SCHEDULER
call dbms_space.auto_space_advisor_job_proc ( )
10 21 1 9.65 0.2 bbc1ck8594kvjEdited by: NM on 10-Sep-2010 07:39 -
How to edit a shared file on my Mac?
Hi,
Is it possible to edit a shared file on my Mac?
I know it is possible on the web, using Numbers/Pages/Keynote for iCloud Beta. But I was wondering if it is also possible to download and edit the file.
I think it is also important that the file automatically updates himself when edited on the Mac, so the other user could see my changes.
So I don't have to download the file --> edit it --> upload the file.
Hopefully there is a solution for this problem, otherwise I'm hoping this will come in the near-future!
Kind regards,
Berendchallenged2012 wrote:
How do I use a flash drive on my mac
Since most flash drives are formatted for PC's rather than Macs, if you plan to use it only with a Mac, when it's plugged in, you can click on it in Disk Utility and partition it GUID and Mac OS Extended (Journaled). Note that if you've already got files stored on it, partitioning it will erase them. -
How to avoid db file parallel read for nestloop?
After upgraded to 11gr2, one job took more than twice as long as before on 10g and 11gr1 with compatibility being 10.2.0.
Same hardware. (See AWR summary below). My analysis points to that Nestloop is doing index range scan for the inner table's index segment,
and then use db file parallel read to read data from the table segment, and for reasons that I don't know, the parallel read is very slow.
AVG wait is more than 300ms. How can I fluence optimier to choose db file sequential read to fetch data block from inner table by tweaking
parameters? Thanks. YD
Begin Snap: 13126 04-Mar-10 04:00:44 60 3.9
End Snap: 13127 04-Mar-10 05:00:01 60 2.8
Elapsed: 59.27 (mins)
DB Time: 916.63 (mins)
Report Summary
Cache Sizes
Begin End
Buffer Cache: 4,112M 4,112M Std Block Size: 8K
Shared Pool Size: 336M 336M Log Buffer: 37,808K
Load Profile
Per Second Per Transaction Per Exec Per Call
DB Time(s): 15.5 13.1 0.01 0.01
DB CPU(s): 3.8 3.2 0.00 0.00
Redo size: 153,976.4 130,664.3
Logical reads: 17,019.5 14,442.7
Block changes: 848.6 720.1
Physical reads: 4,149.0 3,520.9
Physical writes: 16.0 13.6
User calls: 1,544.7 1,310.9
Parses: 386.2 327.7
Hard parses: 0.1 0.1
W/A MB processed: 1.8 1.5
Logons: 0.0 0.0
Executes: 1,110.9 942.7
Rollbacks: 0.2 0.2
Transactions: 1.2
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 99.99 Redo NoWait %: 100.00
Buffer Hit %: 75.62 In-memory Sort %: 100.00
Library Hit %: 99.99 Soft Parse %: 99.96
Execute to Parse %: 65.24 Latch Hit %: 99.95
Parse CPU to Parse Elapsd %: 91.15 % Non-Parse CPU: 99.10
Shared Pool Statistics
Begin End
Memory Usage %: 75.23 74.94
% SQL with executions>1: 67.02 67.85
% Memory for SQL w/exec>1: 71.13 72.64
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
db file parallel read 106,008 34,368 324 62.49 User I/O
DB CPU 13,558 24.65
db file sequential read 1,474,891 9,468 6 17.21 User I/O
log file sync 3,751 22 6 0.04 Commit
SQL*Net message to client 4,170,572 18 0 0.03 NetworkIts not possible to say anything just by looking at the events.You must understand that statspacks and AWR actualy aggergate the data and than show the results.There may be a very well possibility that some other areas also need to be looked at rather than just focussin on one event.
You have not mentioned any kind of other info about the wait event like their timings and all that.PLease provide that too.
And if I understood your question corretly,you said,
How to avoid these wait events?
What may be the cause?
I am afraid that its not possible to discuss each of these wait event here in complete details and also not about what to do when you see them.Please read teh Performance Tuning book which narrates these wait events and corresponding actions.
Please read and follow this link,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/instance_tune.htm#i18202
Aman.... -
I am sharing my macbook pro over a network with windows 7, however through windows 7 I can access my whole computer instead of just the shared files!
Hi Sig,
The issue is that i only want the shared folders to be accessed through windows 7.
Whats the point otherwise to have shared folders?
thanks.. -
How to create files with read/write privileges for everyone?
I have two iMacs 7,1 (one with Snow Leopard and the other with Mountain Lion) in a local area wireless network.
I have shared the "documents" folder in the Snow Leopard iMac in order to have files available to the other iMac. The folder has read/write privileges for everyone.
When I create a new file in the shared "Documents" folder (for example a new Open office document, or a Keynote presentation) this file is by default "read/write" for the Administrator but only "read" for all the other users, so when I try to open it from the other iMac, I am informed that the file is "read only".
I can obviously change the privileges of the file in the information window, but I have to do on a file per file basis and this takes too long.
Is it possible to change settings in order to create files which are always "read/write" for everyone?
And, secondly, since I have several existing files whose privileges I should manually change one by one, is it possible to make global changes of their privileges?
Thanks in advance
Best regardscouple of different changes - 1st, if you want to share folders, doing your whole documents folder is not the best way. Since both your computers can handle AidDrop, that's what I would recommend - http://osxdaily.com/2011/11/14/how-to-use-airdrop-in-mac-os-x/ - as it create an instant Ad-Hoc network between the two computers and then let's it done.
A second possibility that may not be what you're looking for, is to use google drive or some similay cloud sharing app to sync the documents back and forth. both of these solutions will transfer the files well, but the airdrop may be simplest -
How do I change permissions to access a shared file?
My computer has 2 accounts, mine and my wife. She has a folder with photos. When logged in as my wife, I duplicated that folder and moved the copy to the User>Shared folder. When I log in as myself and access the Shared folder I see the copied folder with the photos but I can't open the photos. Get Info shows that I don't have any permissions. How do I change that? Thanks for any help.
OwenSometimes, if you highlight an item and use Get Info (or keyboard
command to generate same item) you can see what user permissions
on a file are; and as the author or superuser of a computer, you may
be able to unlock them or give them a different level of general access.
Since I don't save my images to a specific user account (though my
own computers have two accounts each) these do not have the same
permission issues when used between the accounts; and they are
saved to a file on the hard disk drive accessible to both users directly.
{This is what the Shared folder is supposed to do; but I don't use iPhoto
and so this never comes up as a problem in sharing images or exporting.}
If a user or Admin creates a folder for images, and saves them to the
hard disk drive location, the other user can see and use them; but
when there are different user permissions involved, the files have to
be changed so other users can open them. There should be a way
to make the change on more than one item at a time.
Here is a link to another Apple Discussions thread with some information
which may be of use to you to more streamline the shared folder issue:
Read/Write Permissions for all users...
http://discussions.apple.com/thread.jspa?messageID=7944908
Hopefully this helps; if not, consider each person contributing to folders
in a generic folder on the hard disk drive you create yourself; so it will
not be in a Users folder in the first place. You can connect to these by
putting an alias folder on each of the user's desktops or in their Dock.
{You could also work around the issue by making more work for yourself,
in that you can Archive images (save as .zip) images in a folder and
under one user, those tend to not be user-protected from sharing.}
Another look at how to: "Share an iPhoto Library in Tiger using ACL's"
http://ad.hominem.org/log/2005/07/acl.php
Good luck & happy computing!
edited. -
Sharing files between users and macs
My husband and I share an iMac. I have a MBA for traveling and my husband a PC laptop (though he rarely uses for private stuff). We both have iPhones.
We are looking for a way to:
- Share our photos (we don't use iPhoto) and some files. We would like to have this in one shared folder, that we can access from both accounts in the iMac, the MBA and ideally (though not a must) the PC and iPhones. We would both need to have admin rights to edit documents, etc.
- Have access to all the information in my account on the iMac from the MBA. Ideally, same thing for his and the PC.
- Have access to all the data remotely when traveling.
- Have all the data backed up locally (we already have a cloud backup, but we'd like to have a local backup too as it's easier and quicker to access)
We have read a lot about configuration, NAS, time capsule... but we get more and more confused, as we are obviously no tech experts.
Dropbox is not our preferred choice. We already have a cloud backup system. We'd rather have the files stored and accessed locally for everyday use.
Using a NAS to store shared folders and backup the rest sounds good, but they either seem very complicated to set up, or they have mixed reviews in terms of stability, especially to access files remotely.
Timecapsule seems easier and more straightforward, but I'm not sure it would solve the "sharing files between users and macs with admin rights"? It seems to be more focused on backing up the main drive and then providing access to the backed up files. (Though I might be completely mistaken!)
We just can't manage to have one shared folder between both accounts in the iMac. We need to grant admin rights document by document. We don't manage to make it work automatically so we both have one folder to access with full rights for all the contents inside it. And this seems to me like something that should easily be done...?
Any help, advice, proposals... would be greatly appreciated!!!Move any file you want to the other user to access to the Shared Folder. Anything you put in that folder is available to all users.
The shared folder is here:
Macintosh HD > Users > Shared -
Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partitioned Time Capsule? I understand that the Time Machine (software) cannot backup a networked drive (the external) and that Time Capsule (the router/wireless hard drive) does not have its own backup software... so it won't backup the connected drive. What I would like is an alternate solution for having an automated backup of a networked drive. A 2TB Time Capsule has more than enough space for Time Machine backups of my family of Macbooks, so I had hoped to mirror a 500GB external drive (with shared media files) to a portion of the Time Capsule internal hard drive. I assume this would require a partition of the Time Capsule drive. If not, would the sparse file from the various computers being backed up need to be copied to the external drive as part of the RAID1 setup? This seems like overkill for the Time Machine backup, but it would cover the media files.
The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
It isn't possible to partition the TC although you can create a image area.
The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
Read carefully the speed of the USB drive plugged into the TC. -
Sharing Files Between 3 Arch Computers Using SAMBA [SOLVED]
I am trying to network 3 of my computers together. They are all running Arch 64. I setup the smb.conf file according to various tutorials and then the folders show up on the other computers, but when you double click them (using Gnome 3) it gives an error "unable to mount location, failed to mount windows share"
I know this has to be some permission issue but I have spent hours on this and am hitting a brick wall. Here is my smb.conf file.
#======================= Global Settings =====================================
[global]
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = WORKGROUP
# server string is the equivalent of the NT Description field
server string = Samba Server
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = share
guest account = nobody
[Z]
path = /media/Z
public = yes
guest ok = yes
writeable = yes
only guest = yes
browseable = yes
[Documents]
path = /home/myname/Documents
public = yes
guest ok = yes
writeable = yes
browseable = yes
only guest = yes
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
; printing = cups
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
[Z]
path = /media/Z
public = yes
guest ok = yes
writable = yes
only guest = yes
browseable = yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# Set public = yes to allow user 'guest account' to print
guest ok = no
writable = no
printable = yes
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = no
; printable = no
; write list = @staff
# Other examples.
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
[Z]
path = /media/Z
public = yes
guest ok = yes
writable = yes
only guest = yes
browseable = yes
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
I know Z is in there twice, I tried adding it in a different spot after watching a tutorial, this doesn't have any bearing on my problem.
Last edited by LuckyStrike (2012-02-18 00:26:51)Try setting it up this way...
#======================= Global Settings =======================
[global]
log file = /var/log/samba/log.%m
so_rcvbuf = 8192 SO_SNDBUF=8192
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
obey pam restrictions = yes
socket options = TCP_NODELAY
map to guest = bad user
encrypt passwords = true
passdb backend = tdbsam
passwd program = /usr/bin/passwd %u
dns proxy = no
netbios name = ArchLinux
server string = %h server (Samba, Arch)
path = /home/username
default = global
unix password sync = yes
os level = 20
auto services = homes
syslog = 0
panic action = /usr/share/samba/panic-action %d
usershare allow guests = yes
max log size = 1000
pam password change = yes
#======================= Share Definitions =======================
[Home]
guest account = nobody
comment = Home Folder
writeable = yes
[Z]
guest account = nobody
comment = Z-Drive
writeable = yes
path = /media/Z
[Documents]
guest account = nobody
comment = Documents Folder
writeable = yes
path = /home/myname/Documents
Changing the username parts and other as necessary of course. -
Why are shared files not visible when iPhone4S connected to iTunes?
What makes this problem mysterious is that I have exactly the same settings on the same or eqivalent Apps on iPad2 and iTunes4S but when my iPhone is connected to my iTunes (running on my PC under Win7) it shows no files on Apps like Pages, iBooks, Keynote, and Print-n-share. Each of these Apps has files and each shows files when I connect my iPad2. I cannot export or import filesto/from itunes and iphone because the list of files inside the Apps is not visible in itunes.
PS I CAN, btw, export and import files by using the amazing App and service "DropBox" which is the only route in and out of my iPhone (I am not ready to use iCloud).This is not a reply but an addition. While searching for answers as to why "Shared" files in original Apps in my iPhone4S did not appear on itunes I came across a similar discussion on another Forum in which Jim described in some detail how to get the two devices (my iPhone 4S and my iPad2) to recognize similar embedded files in similar Apps. https://discussions.apple.com/message/16690584#16690584
I went through this promising procedure but it did not help. Since the two devices are independent (I think -- they are on the same accoubt but ar different devices) I should be able to make them work the same way with regard to what is seem in iTune. -
No longer able to access shared files on my pc over my network from my mac
For months I have been able to access my shared files folder located on my pc, sharing a network with my PowerBook G4 (OS X 10.3 +). Suddenly, when I try to access the pc now, I get the spinning beachball and nothing. I can see my pc in the network, but it doesn't open. I haven't made any changes on the pc side, except perhaps the windows security updates that come along once in a while. (I did try to access it with the firewall turned off just in case, but no dice).
Does anyone have any ideas or things I could try to shake this out?Adobe Story stores its local files on the following location:
On Windows,
1. Open Windows Explorer and type '%appdata%' in the address bar
2. Make a copy of 'com.adobe.AdobeStory.<some-number>' folder. This folder contains Story's local data.
On Mac,
1. Open Finder.
2. From 'Go' Menu, open 'Go to folder'
3. Type '~/Library/Preferences' and hit enter
4. Make a copy of 'com.adobe.AdobeStory.<some-number>' folder. This folder contains Story's local data.
Maybe you are looking for
-
Pse 8 for mac: turn off tabs in workspace?
I am finding the tabs across the top of the workspace get in the way when i am using tools and modifying them etc, mousing over the tab to get to the modify options, activates the tab label pop up, which blocks my use of the modifyers -- hope that ma
-
Bug in PDF pinch and zoom?
Hi, I have a big problem related the PDF pinch and zoom. When I try to make an article with 2 vertical pages each containing one imported PDF and 1 horizontal page contain two imported PDF, the result is a simple jpeg page with no pinch and zoom. The
-
Embed H.264 exported videos in Powerpoint 2010
Hello, We are using CS 5.5 on Windows 7 x64. Our videos are exported using the H.264 format. The problem is: We can embed the video in powerpoint (assumed quicktime is installed) but when we want to play it in the presentation, it simply shows a blac
-
Being a student i was eligible for education edition, i have received a serial number from Adobe but when entered into the trial version, it is not valid? what am i doing wrong?
-
Trouble installing Adobe Premiere 10 on new mac. Help!
I am new to mac so this could be user error, but I was able to install photoshop with no problem but with premiere I keep getting an error message about half way through install that says something like Warning. Exit code 7. With several DW036 messag