Sharing libraries on home windows network stopped after upgrade to 7.2.0

Up until I upgraded to 7.2.0 I had no problems sharing my iTunes libraries across my windows desktop & 2 windows laptops. Now I can no longer share. Tried deselecting & selecting the share option. Tried pinging each machine. Tried turning firewalls on and off. Nothing. Anyone else had this issue? All machines are windows XP.

disovered conflict with vpn software. Unistalled vpn software & itunes shared library reappeared on all other PCs

Similar Messages

SAPCCM4X.03 Windows Service stops after 3 sec.

Hi!
I would like to set up the SAPCCM4X agent on the satellite system.
The installation with the commando >sapccm4x -R pf=... endes without any errors.
The problem is that the appropriate SAPCCM4X.03 Windows Service stops after 3 sec.
The output on the CMD console is:
INFO: trying to register service SAPCCM4X.03 at Windows Service Control Manager
starttype of service:             manual/[auto] :
DomainName\UserName or [<LocalSystem account>] :
INFO: Agent is running (no actual pid, but actual shared memory!)
WARNING: Service SAPCCM4X.03 already stopped. But agent is running!
WARNING: The following service is registered but could not be started
SAPCCM4X.03
(command ["E:\usr\sap\SC3\SYS\exe\run\sapccm4x.exe" -Service
pf=E:\usr\sap\SC3\SYS\profile\SC3_DVEBMGS03_VMSAP01]   user <LocalSystem account>)
INFO: Updated config file E:\usr\sap\SC3\DVEBMGS03\log\sapccm4x\csmconf.
EXITING with code 0
How can I solve this problem?
Thank you
Ju00FCrgen

Hello Jürgen,
WARNING: Service SAPCCM4X.03 already stopped. But agent is running!
you could try to clean up the part of the shared memory used by the agent:
sapccm4x pf=<instance profile> -initshm
Maybe the agent starts afterwards.
Regards, Michael

IPhone Home Button not working after upgrade to ios 5.1.1

Hey everyone,
I'm pretty sure this is a software failure due to the symtoms the iPhone is showing;
0 - the home button does not work at all when the phone is turned on and running ios 5.1.1, well it used to work okay when i had ios 5.0.1, I upgraded to 5.1.0 and started working randomly, upgraded to 5.1.1 to see if it was fixed with no luck at all.
1 - When locked the screen does sometime light up, like when you press the home button and don't slide the unlock button. but it does not exit apps anytime, I mean it doesn't act like it's pressing the home button randomly but only when the phone is locked.
2- The button does work perfectly when iOS is not running: I can get in and get out of recovery and dfu mode at will, that wouldn't be possible if the button were broke.
3- what else? Oh yea, not really a symtom: Tried the 'home button calibration' several times.
4 - It's not filthy, since I really cleaned it thoroughly with a powerful tiny nozed air blower I got and gave a rubbing alcohol treatment too.
5 - when I shut the phone down it instantly turns back on, I can interrupt the turning on for turning the phone into dfu mode (i'm sure It's in DFU mode because the tinyumbrella log monitor tells me)
I'm now using the 'soft' home button that goes in the accesibility options, but hey, I didn't pay a ton of money for a phone that the same Apple is gonna break down.
It's out of warranty and I don't have apple stores where I live.
I'd downgrade to 5.0.1 in a snap if I could but I'm not into jailbreaking, so the shsh blob thingie is not a possibility.
Any apple dev around that can give me a workaround?
thanks a lot in advance
Added more info ~

I had the same problem with Home button not responding after upgrading from iOS 5.1 to iOS 5.1.1 on an iPhone4.   I solved it but not sure exactly what fixed it.   Here is what I did.
1. Took it local Apple store Genius appointment.   They used a special tool and took some lint out of the connector opening.   The Home button started working.   They said even though the phone was out of warranty, I could buy a new replacement one without a contract for $150.
2.   The Home button stopped working when I got home.   I got some compressed air in a can and blew the air through the connector to try and clean out more dust.   I now keep the phone with the connector opening facing down in my pocket.   I also struck the phone downward on my hand or other soft surface to force as much dust out as possible.
3. The Home button still was intermittent. I then tried to do a hard reset by holding the power on key and the Home button simultaneously for about 10 seconds. This doesn't work if the Home button doesn't respond.
4. I connected the iphone to Itunes via the USB to sync the phone. While connected, I did a Hard Reset by Holding the Power button and Home button simultaneously. I noticed the Home button responded better when connected to ITUNES via the USB.
5. I did a backup of the iphone4 by highlighting the iphone 4 while connected to ITunes and right mouse click and selecting BACKUP.    I was prepared to reset my phone4 in iTUNES and restore it from the backup.
The phone worked consistently before I had to do this.
6. As a last resort which I didn't need to do, I was going to copy all my settings for the iphone by selecting the phone in iTUNES and looking at all the sync settings.   I would then have restored the iphone to original factory settings and then sync the phone using the copied settings. This would have made sure that the backup didn't include the bug.
Fortunately, I didn't have to do step 5 and 6.   Things started working after Step 4. So I don't really know if it was the iOS 5.1.1 upgrade or pure coincidence that the Home button stopped working immediately after the upgrade.

Iphone 4 Home button not working after upgrade to OS 4.3.5

Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

Is anyone having trouble with the "home" button not responding after upgrading to 5.1.1 OS?

Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?

You will not belive how I accidently solved this - !!!
Yes I had the problem immediately after the 5.1.1 'cloud' upgrade, the problems started (on my iphone 4) ... I followed the 'get power down button, then hold HOME for 30 secs' solution, but no result, nothing seemed to work and I was starting to get a bit agressive with the keep it pushed, multiple double click frustrations, icopybot multigesture solutions etc. and paid money ... but this comedy solution now works ...
I discovered it because I ordered a waterproof case for my iphone for my motorcycle ... I've just fitted it to my iphone and all the problems have gone ??? what! ... so wondering why I looked at what the home button on the casing was doing - it was pressing ACROSS the home button i.e. it converted my finger point into a wider 'PRESS
so taking the new case off, instead of using the point of my thumb to press HOME, I used the flat of my thumb to emulate it ....and initially nothing, so I wondered if it wa making better 'cross button' contacts, so I licked my thumb, wiped it and then tried again! - it worked!
I can't explain it but it seems to work - try it! if the double click on HOME doesn't work lick your thumb dry it and try again! I've just done it again
what a mad techno world we live in! :-)
Dave

HI! I am using iTunes with Windows 7 64bit.after upgrading itunes to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

HI! I am using iTunes with Windows 7 64bit.after upgrading itunes to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

Refer this article to reset Winsock to it's default. Your PCTools may have inserted LSP.
http://support.apple.com/kb/TS4123?viewlocale=en_US
After reset and restarting windows, you may get a prompt to remap LSP, click no.

E4200 Can't see my network shares after upgrade

I can't see my network shares after upgrade altough everything works fine , the network scanner shows all the atatched devices but in Eplorer when I click Network there is nothing shown on two computers running Win7 64.
I did downgraded the firmware back to .01 but still no network .
Any help ?

After upgrading the firmware did you reset the E4200? After successful firmware upgrade you need to reset the router. It is recommended to reset the router once. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
After reset, reconfigure the router and then check the connectivity status…

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

Try to perform SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Then try a safe boot:
http://support.apple.com/kb/HT1564
Ciao.

Shared "libraries"/mltple computers wireless networked to shared hard drive

I really spent some time researching this question prior to posting. My goal is to have three computers (mine, wife's,kid's) all accessing a single hard drive on which all of our combined music is stored with iTunes on each computer seeing our whole library of music, then all of us can create playlists, sync to varous nano's, shuffles, etc. Hard drive is all set up, wireless access is set, all three computers can access various other shared files on the hard drive. All three computers have been "mapped" so that they look at this new Z drive, so I went through Edit/Pref/Advanced/General and changed each computer to look at this new Z drive versus their own C: drive/Music folder etc. Then I went through Advanced, Consolidate on one computer to put all of our music that used to be on one individual computer's hard drive and successfully moved it out to the new shared, wirelessly accessable Z drive.
Now, I want to be able to add new songs to that Z drive, ideally from any individual computer and have all other computers "see" those new songs that are now out on the Z drive. I have gone around the house and tested adding via CD's new songs from each computer to the new shared Z drive and that works. However, each of the individual iTunes libraries do not see the new songs.....is there some way that each computer's iTunes could update itself so that it recognizes that there are new songs out on the shared hard drive??? If so, I can't seem to figure out how to make it work.
Also, on Edit/Preferences/Sharing...I have selected and checked "Look for shared libraries" and also selected/checked "share my library on local network"....and selected/checked "share entire library"....and I have done this on each indvidual computer, but I am not sure if those are the right selections/checks to achieve my goals. Is this what I should do on each computer?? In the blank "Shared name:" I typed "iTunesShared" which is the name of the file that I created on the shared hard drive and I did this on each computer in each individual iTunes program. Is this what I should be doing??
Finally, on one of the computers (the computer that I have been currently using to add CD's to our shared hard drive) under Library, on the left hand column...there is a heading called "Shared" and under that heading it lists two subheadings - one called "Owners's music" and the other called "Susan's music" - and those seem to turn off and on if I have one of the other two computers logged on and its iTunes program launched. If I go to one of the other computers and shut down iTunes on it, one of those subheadings will disappear. Also, with iTunes launched on the two other computers - I see under the "Shared" heading the "iTunesShared" heading and if I click on it, iTunes is then looking at the Z drive with all of the our songs stored on it....but the other two computers can only see this file if the computer that I have been downloading songs from is launched....i.e., the only way all three computers can see the Z drive with our full song library on it is if just one of the other computers is up, running and has iTunes launched.
Again, my goal here is to have all three computers iTunes be looking at the Z drive so that they would have access to our full library of songs...so, any ideas how I can make that happen or what I have done wrong here?? I think I am closing to figuring this out but am now stuck. Any advice or guidance would be much appreciated.
thanks,
CAS
Also,
Dell Latitude D420 Windows XP

Seems like you have things set up right. You may be disappointed though.
Each account on each computer is separate as far as libraries go. Even if all are set to save to the same location, like yours, the different libraries do not see each other. The library files for each user are basically just shortcuts to where the tracks are, so even if 5 users add the file to their own library there will be media file.
What this means is that adding files with one, the others will not know it. There is no setting available to change this behavior. Each user must add the files to their own library using the 'add folder' or 'add file' options.
Is that everything? You had a big post.

File sharing problem on home wifi network.

I am trying to get file sharing to work but its failing.
This is between 2 macs running mavericks on a home wifi network.
On my "sharing" computer I have set up file sharing in preferences.
Selected the folders and allowed access to everyone.
On the other computer I am using to look at shared files.
I open finder, goto network, I see the icon for the other computer.
I click on it and I get connection failed each time.
I have tried both ways, tried restarting etc.
Each time the same problem.
Any ideas please ?
thanks

I've spent the past month fighting a similar problem and Apple Support was no help. In my case, I could usually connect successfully IF the "sharing" computer was awake but I could never connect after it went to sleep. After much frustration, I decided on a shotgun approach and tried every configuration combination that I could think of. I found one combination that works reliably for me. It's illogical and also completely contradicts Apple's instructions but results count.
In my case, I wanted to use my MacBook Pro (with Mavericks) to access files on my iMac (with Mavericks).
No clue if my solution will work for you but there's no harm in trying.
Go to your "sharing" computer and confirm that file sharing is "on" and DELETE all folders from the shared folders box. That box should be totally blank.
Just below the "File Sharing: On" verbiage, jot down the address associated with the afp and smb commands. It's 10.0.1.7 in my case, which I'll use in my example below. If you don't see "afp" AND "smb" in that verbiage, go to Options and turn both command languages "on."
Go to the other computer and use "Go > Connect to Server" and enter smb://10.0.1.7 as the server address. Of course, use your address instead of my 10.0.1.7. Be patient. Depending on whether or not my iMac is sleeping, a connection can take as long as twenty or thirty seconds.
Post back with results. I'd like to know if this works for anyone else.
Edit...
I just noticed your signature. If you're really at 10.9.1, you might want to first update to 10.9.2.

Networking Issues after Upgrading to Windows 8.1

I have a Windows 8 desktop PC that is working fine with my network. I can browse the Internet fine using all major browsers etc. After upgrading to Windows 8.1 through the Windows Store I noticed that my wired networking was not working correctly.
The status of the network does not change (i.e. it doesn't change to Limited Connectivity) however browsing to sites in Chrome, IE or Firefox doesn't work as well as Windows 8.
IE11 gives me the error "This page can't be displayed, make sure the web address is correct" and other browsers give a similar error. I normally have to refresh 2-3 times to get a new page to load, sometimes even more. Everything works
fine from a laptop connected at the same time so it isn't an network issue with my provider.
I thought this might be a driver issue with the two on-board Marvell wired network adapters. I wasn't able to rollback the driver to older versions I found on the Internet. I then purchased another network card, Intel Desktop gigabit and the
issue still persists with that adapter. I then tried a USB wireless adapter and the issue still persists using wifi with the wired adapters disabled. I tried a new network cable and no luck either. I also tried resetting the IP stack using
the various netsh commands.
After that I thought I might try reset the Windows 8.1 PC, however that didn't work as I didn't have the restore image available as I upgraded from the Windows Store. I then tried installing Windows 8.1 fresh using a ISO with my Windows 8 key using
some of the recent guides that are available. That all worked but it didn't fix the networking issues.
I re-installed Windows 8.0 and the networking is now fixed and back to working normal again. I'd like to try again but I think I will have the same problems. I can't imagine why this would be a driver issue as I tried 3 different network adapters
and two installs of Windows 8.1. Any ideas what would be the cause of the Windows 8.1 issue?

HI,
Since this issue only occurred in the your desktop PC, and many network adapters you tried, failed, thus I think maybe we should focus on the model of your desktop PC, I suggest you update the BIOS and chipset from the manufacture to improve
the performance of win8.1.
Please also test this issue in safe mode with networking.
Please refer to:
Windows Startup Settings (including safe mode)
http://windows.microsoft.com/en-in/windows-8/windows-startup-settings-including-safe-mode
I’d like to share the following article with you:
Wired and wireless network problems
http://windows.microsoft.com/en-IN/windows/network-connection-problem-help#network-problems=windows-81&v1h=win81tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Regards,
Yolanda
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
The issue occurs in safe mode as well under Windows 8.1. The motherboard is an Asus P5B Premium, however it works on Windows 8. How would I update the chipset when booted into Windows 8.1? In Device Manager it wasn't allowing me to update
the network drivers as they were newer versions already installed.
Edit: I also installed at Intel Chipset Device software dated 8/8/2013 with version 9.4.0.1026 and the issue still occurs. I am also running the latest BIOS that is available.

Printing to a Windows Network printer after 10.4.9 upgrade

Very desperate with this. We have a couple macs at the office and after a move and some software updates all cannot print via a Windows network printer.
Unable to connect to SAMBA host is the only error we receive.
I checked my smb:\\ syntax, I have tried IP address, tried picking from the list (which by the way the printers do show up yet you cannot print to them)
Extremely frustrating and with an Anti-Mac IT director this gives him more ammo to say Macs are irrelavant in the workplace.
The Macs are bound to Windows Active Directory and the users are Active Directory users. We do not have a Mac OS X server. Our printer server is Windows 2003 SP1, the printers range from an HP LaserJet 4100 to a Xerox WorkCentre 24, all do not work.
The ONLY network printer that appears to work is the printer associated during the login
Curious if anyone with 10.4.7 and higher have problems....

More info...here is the cups/error log when trying to print from a newly added Windows network printer...looking for some help on this....
I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox device-uri to "smb://HOPE/fps2.projecthope.org/FPS2-Color Xerox" (was "file:/dev/null".)
I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox printer-is-accepting-jobs to 1 (was 0.)
I [22/May/2007:12:22:45 -0400] Setting FPS2ColorXerox printer-state to 3 (was 5.)
I [22/May/2007:12:22:45 -0400] Saving printers.conf...
I [22/May/2007:12:22:45 -0400] New printer 'FPS2ColorXerox' added by ''.
I [22/May/2007:12:23:05 -0400] Saving printers.conf...
I [22/May/2007:12:23:05 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:16 -0400] Saving printers.conf...
I [22/May/2007:12:23:16 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:16 -0400] Saving printers.conf...
I [22/May/2007:12:23:16 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:20 -0400] Saving printers.conf...
I [22/May/2007:12:23:20 -0400] Printer 'FPS2ColorXerox' modified by ''.
I [22/May/2007:12:23:37 -0400] Adding start banner page "none" to job 5.
I [22/May/2007:12:23:37 -0400] Adding end banner page "none" to job 5.
I [22/May/2007:12:23:37 -0400] Job 5 queued on 'FPS2ColorXerox' by 'js721'.
I [22/May/2007:12:23:37 -0400] Started filter /usr/libexec/cups/filter/cgpdftops (PID 6183) for job 5.
I [22/May/2007:12:23:37 -0400] Started filter /usr/libexec/cups/filter/pstops (PID 6184) for job 5.
I [22/May/2007:12:23:37 -0400] Started filter /Library/Printers/Xerox/filter/XeroxWCPFilter (PID 6185) for job 5.
I [22/May/2007:12:23:37 -0400] Started backend /usr/libexec/cups/backend/smb (PID 6186) for job 5.
E [22/May/2007:12:23:39 -0400] [Job 5] Connection failed with error NTSTATUS_BAD_NETWORKNAME
E [22/May/2007:12:23:39 -0400] [Job 5] Unable to connect to SAMBA host, will retry in 60 seconds...DEBUG: Page = 612x792; 11,11 to 601,781
E [22/May/2007:12:24:39 -0400] [Job 5] Connection failed with error NTSTATUS_BAD_NETWORKNAME

Lost 5 GHz wireless network access after upgrading to Windows 10

Hello, Lost the ability to connect to (and see) my 5GHz wireless network after upgrading Windows 8.1 to Windows 10 on my Yoga 2 13. I have tried to update the wireless driver to the latest version. The WiFi card is the original Wireless-N 7260 that was installed when I bought the computer. I know for a fact that I was able to use 5GHz networks Before as I can see my saved networks and I can clearly see that I have my 5GHz network in that list. Please advice, Patrik

Good to see it fixed itself. One setting that can block Windows 10 from seeing the WD My Cloud and other devices/computers on the network is the "network location type". During the upgrade or install to Windows 10 one may not quite understand what they are reading when, or if, asked which kind of network they are connecting to. If they select "no" on that particular screen (example below), Windows 10 will block access to certain local devices possibly including the WD My Cloud. The following link gives a general overview of the issue and ways to fix it if one made the wrong selection: Change network location type (Public or Private) in Windows 10

Cannot load shared 'project' in Windows Universal app after upgrading to Azure SDK 2.6

I've just installed the
April 2015 release of the Azure SDK. It is version 2.6 and previously I was on 2.5. Now one of my projects will not load. It is the shared project in a Windows Universal application.
When I right-click the project and choose 'reload' I get the pop-up error
> The method or operation is not implemented
The output window gives more detail:
> Things.Shared.shproj : error : The composition produced a single
> composition error. The root cause is provided below. Review the
> CompositionException.Errors property for more detailed information.
>
> 1) No exports were found that match the constraint:
> ContractName
Microsoft.VisualStudio.ProjectSystem.References.IBuildDependencyProjectReferencesService
> RequiredTypeIdentity
Microsoft.VisualStudio.ProjectSystem.References.IBuildDependencyProjectReferencesService
>
> Resulting in: Cannot set import
> 'Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService.ProjectReferencesService
> (ContractName="Microsoft.VisualStudio.ProjectSystem.References.IBuildDependencyProjectReferencesService")'
> on part
> 'Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService'.
> Element:
> Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService.ProjectReferencesService
> (ContractName="Microsoft.VisualStudio.ProjectSystem.References.IBuildDependencyProjectReferencesService")
> --> Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService
>
> Resulting in: Cannot get export
> 'Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService.WireUp
> (ContractName="Microsoft.VisualStudio.ProjectSystem.ConfiguredProject.AutoLoad")'
> from part
> 'Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService'.
> Element:
> Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService.WireUp
> (ContractName="Microsoft.VisualStudio.ProjectSystem.ConfiguredProject.AutoLoad")
> --> Microsoft.VisualStudio.Azure.Deployment.ProjectReferenceMaintenanceService
The other parts to the Windows Universal app (the Windows 8.1 project and the Windows Phone 8.1 project) have two Azure NuGet packages installed: Windows Azure Mobile Services 1.3.2 and Windows Azure Storage 4.3.0. (N.B. Those two projects load without issue.)
This is not a show stopper for me since uninstalling the Azure SDK 2.6 removes the load failure. To uninstall I go via the Control Panel to 'uninstall or change a program' and then uninstall Microsoft Azure Tools for Microsoft Visual Studio 2013 - v2.6
I would like to know how to fix this without uninstalling the Azure SDK 4.6.

Hi
Have the same problem and waiting for an answer also.
Code is like a box of chocolates!...

Cannot log into windows network account after Bootcamp install

Hi All,
I have a 27" Intel i3 iMac with Mountain Lion 10.8.7. Its connected to a windows server. To access my account on the Mac I log in with a username and password. Yesterday I had Bootcamp with a 32bit version of Windows installed. After the Windows was installed successfully, my 'Helpdesk' had to remote access in and run patches on the windows installation. All good so far.
I tried to log into my mac account this morning with username and password. There is a little red light beside your username. I had no luck what so ever. My account has vanished of my mac. I could 'locally' log in under the adminstrator account. There was no sign of my account in the users & groups.
I had back upped my files except for the download folder. I eventually found the download folder and was able to back that up.
please please can someone explain what has happened here.
My IT guy has no Apple trianing and wants to remove my mac and replace it with the a PC because they support them. I feel it was a bad bootcamp installtion done by the IT tech, he did mention that he installed a 32 bit windows instead of a 64 bit. Its lack of trainign and understanding that has caused this.
I am trying to make an argument to say that it was simplay a bad Bootcamp installtion and try and find simliar cases to back it up.
Please help

Mac partition was still there as I was able to log into the Administrator account on the mac. But when I went into users and groups there was no sign of my account. I'll agree it was a bad install, jsut need to explain it and back it up so that I can make that argument.
thansk

Sharing libraries on home windows network stopped after upgrade to 7.2.0

Similar Messages

Maybe you are looking for