Shift Date and Times

I went on a trip with some friends and started organizing and soon found out that one person had their camera set 193 days off. Is there a way through aperture or with plugins to just shift the metadata dates because All I can see is an overall date adjustment. I found a plugin for iphoto that can do it but I'd love to see something like that for aperture. Any clues?..

You're right. It did shift the rest. The only thing now is the year. I haven't found anything to change the year up 1... I just wish my friend was a bit more tech savvy enough to have his camera at the right date.

Similar Messages

  • Bizarre date and time hang.. Hardware or software?

    Hi all, i have this totally bizarre problem that i have never seen in my 25 years of using mac's..
    Since yesterday my date and time seems to hang; it doesn't really update anymore and when i hover my mouse over i get the beach ball. Also this seems to effect the system prefs, if i start that up it sometimes hangs too.. which then effects and hangs the finder.
    Last night i deleted the associated plist and cages things, zapped the pram etc, no luck with this. Also disk utility showed no problems with my drive.
    So today i installed a fresh new 10.6 system which did install, but the first 2 attempts getting across the welcome&register screens gave me beachballs and complete unresponsiveness too. So now after some hard restarts i'm puzzled.. Also startup and shutdown seems slow.
    As far as i can tell there is no special clock battery in these things that could cause this? So anyone any ideas? Every idea is much appreciated!
    Thanks, Gerben

    Welcome to Apple Discussions Gerben.
    Your computer is apparently early 2008. Do you have the extended Applecare warranty? If you do you could take it to the nearest Apple-authorised service centre & get it checked out.
    If not, try starting in safe mode by holding the shift key until the Apple logo appears. See whether the problem is still there. If not, it's a software problem almost certainly.
    However you should also disconnect all peripherals and see whether there is still a problem. If not, then it is likely one of the peripherals is the source of the problem.
    Failing this insert your original installation dvd, disconnect all peripherals and restart holding the D key. This will check hardware. If any errors are reported you might need to approach service.
    Neville

  • Changed date and time and lost reference to proxy files

    I had a batch of transcoded proxy files (from a Canon 550d) that had the wrong time on them. I used "Modify > Adjust content created date and time" to shift them by an hour. FCP now reports "Missing Proxy" for all of them. I've checked in the events folder and all the proxy files are still there, it just seems FCP has lost its reference to them.
    I can re-transcode them but of course that takes a long time. Two questions: anyone any idea why this happened and is there a way to re-link FCP with the existing files?
    Curiously I adjusted the time on some files that had been transcoded from a AVCHD source and these are still OK!
    (Using V 10.0.5 on a 2011 MBA with LaCie Thunderbolt disc)

    In the end I re-transcoded the files but I think this article may have been the answer:
    http://www.larryjordan.biz/fcpx-relinking/

  • Set date and time

    I recently updated the apple tv .It was fine after the update although i did not use it as i was on my way out after the update.Days later when i put in on it cant seem to open itunes.reason being network time cannot be updated.i tried sighning out and now i cant sighn in.I tried reset that just brings me to a halt on screen that says activating setting date and time.Does any one know whats going on.Is the time server down ? Or something .Itune store sighn in works well in my pc ,ipad and other devices no problem.
    And i tried putting off all firewalls in router but no luck.
    Its connected wirelessly to the same router which normally works
    Any idea guys

    HI
    I have tried everything possible such as router firewall settings changing DNS servers using WIFI and ETHERNET nothing works.Waited for more updates nothing so far.The only solution is to down grade the firmware through itunes .Using now 5.0.2 works like a charm .Don't wait any longer just search apple forum for procedure and follow.Use a mac better.It takes only 5 minutes for the process.All you need is a mac or windows pc,usb cable,the type that goes behind the apple tv,(I used a blackberry bold 9900 original cable),software known as ipsw.YOU DONT NEED TO POWER THE APPLE TV WHILE DOING THIS.IT WILL LIGHT THE LED FROM PC POWER.GO TO https://discussions.apple.com/thread/4419016?start=0&tstart=0  Read procedure written by cwlown .JUST MAKE SURE FOR MAC HOLD OPTION KEY DOWN THEN CLICK RESTORE .POINT TO THE DOWNLODED ipsw AND RUN.FOR WINDOWS HOLD SHIFT THEN CLICK RESTORE .POINT TO Ipsw download and run.There is no neen to unzip or extract ipsw.I had a problem when using windows xp ipsw did not show up as an upgradeable firmware therefore could not run it.I did not want to waste time and used the mac instead.I think renaming the ipsw in windows could have cleared the problem.Another thing is after the downgrade itunes will say that your APPLE TV is restored to its factory defaults don't worry the job is done ,check your software on the APPLE TV THROUGH your tv LOCATED at general then about.SETTING up the ATV first connect the wifi or lan cable select location first THEN sign in.

  • HT2473 How can I get the date and time back on the menu bar?

    Several items disappeared from my menu bar for no  reason known to me.  I miss the date and time and want it back. Please .  I have gone to System Preferences and clicked "date and Time" but it will not allow me to check anything on the page even though there is a box "Show date and time in Menu bar".
    What should be my next move?

    One more thing might help us
    In the Finder > Date & Time Preferences > Take a Full ScreenShot of the entire display showing the "absence" of the check box (or whatever) to Show in Menu Bar
    ⌘ Command + ⇧ Shift > Press ' 3 ' > release all three
    Use the camera tool > locate the screenshot in the Desktop (not sure whether it will say "Picture 1.png" or have a TimeDateStamp as a title.
    ÇÇÇ

  • Aperture 2: malfunction when adjusting image date and time

    Hello,
    When I'm adjusting date and time for a group of images the following malfunction occurs:
    The time is shifted by the difference between first and last image into the past, if the first image is the active one and into the future, if the last image is the active one.
    E.g.:
    Original: 23.02.08-12:00:00, 23.02.08 - 12:02:00, 23.02.08 - 12:05:00
    Correction of first image to 20.02.08 - 12:00:00
    Result: 20.02.08 - 11:55:00, 20.02.08 - 11:57:00, 20.02.08 - 12:00:00
    Original: 23.02.08-12:00:00, 23.02.08 - 12:02:00, 23.02.08 - 12:05:00
    Correction of last image to 20.02.08 - 12:00:00
    Result: 20.02.08 - 12:05:00, 20.02.08 - 12:07:00, 20.02.08 - 12:10:00
    Best regards, Jannes
    Message was edited by: cumulusCE

    Themes to be different depending on localized versions. I'm using a German Version.
    With Update 2.0.1 it's solved.

  • The date and time?

    My brother likes to turn his HP laptop off when not in use, tried everything to get online, and was showing "IE could not display this page", and The certificates you need are out dated. Called M 800 line, no help, they said they would call back,
    three days past now...called Comcast, they could not help, gave me new modem and new phone number, six (6) days later still no internet. So was lookinf at desktop, and noticed the date seemed just a bit off...""Friday October 31, 2010"...opps,
    off there by four years...changed the date and time to present, IE and access all returned. I would like to hi-5 the prankster since it was Holloween, but really want to know how this really happened...any ideas???

    Hi, paulmont -
    Be sure the Time Zone setting is correct.
    If you have time displayed as 12-hour (rather than 24-hour), be sure the AM/PM setting is correct. Having that wrong will displace the mod/create date/time recorded for a file by 12 hours, which will (at times) shift it to another day.
    If you use Classic, make sure the same settings are in Classic as well as in OSX, particularly the Time Zone setting. This is especially true for machines which can be and are booted into OS 9. The typical symptom for this being the cause is an offset of one or a few hours.

  • The date and time of files created and saved are off

    I notice that under the date modified column, files that I have saved or updated are usually a day off. I checked the date and time in the system preferences and it is correct. is something wrong with the battery?

    Hi, paulmont -
    Be sure the Time Zone setting is correct.
    If you have time displayed as 12-hour (rather than 24-hour), be sure the AM/PM setting is correct. Having that wrong will displace the mod/create date/time recorded for a file by 12 hours, which will (at times) shift it to another day.
    If you use Classic, make sure the same settings are in Classic as well as in OSX, particularly the Time Zone setting. This is especially true for machines which can be and are booted into OS 9. The typical symptom for this being the cause is an offset of one or a few hours.

  • Get the date and time from iframe.

    Hi,
    Am using jdeveloper 11.1.1.6.0., I have used the following iframe source which gets the date and time.
    <af:form>
    <iframe src="http://free.timeanddate.com/clock/i3xb4nm0/n1722/tt0/tw0/ts1" frameborder="0" width="244" height="19">
          </iframe>
    </af:form>
    I need to get the date and time separately to perform some validation. How can i  get it.
    regards,
    Prasad K T,
    9840021070

    Prasad,
    I don't understand your use case. The url you use is a json web service which returns it's result as either xml or json payload. Why do you pretty print this as a web page and try to get to the result this way?
    Why don't you get the result directly using the json result or (AFAIK) the java script api which the service also provides.  Check the documentation of the service.
    From your description I understand that the user enters a time. You need to know if the time is before or after 2:30pm and have to set a 'shift' to A or B.
    Where do I need a timeservice in this validation?
    From what I see your approach won't work. As I still don't understand the use case I don't know how to help.
    Timo

  • CONCATENATE date and time into a text variable

    Hi ABAP Gurus,
      I would like to retrieve current system date and time and concatenate into a variable. I would really appreciate if someone could help me. I have the following code and i seem to get some kind of error.
    I would like my output to be like:
         "22.JUN.2006  Some Text  12:30:22"
    Code:
    data:  emtext     like TEMSG-EMTEXT.
    data:  date_output(50)  TYPE C.
        CALL FUNCTION 'CONVERSION_EXIT_SDATE_OUTPUT'
           EXPORTING
               INPUT          =  SY-DATUM
           IMPORTING
                OUTPUT        =  date_output.
    SHIFT date_output RIGHT DELETING TRAILING SPACE.
      CONCATENATE date_output ': Some Custom Message '
       INTO emtext.
      Also, is there a function to convert time to text or conversion is not necessary?
    Thanks.
    Regards,
    bw_newbie

    Here is something a little closer to your requirement.
    report zrich_0001 .
    data: date(20) type c,
          time(10) type c,
          str type string.
    data: xT247 type T247.
    select Single * into xt247 from t247
              where MNR = sy-datum+4(2).
    concatenate  sy-datum+6(2) xt247-ktx sy-datum(4)
              INTO date separated by '.'.
    write sy-uzeit to time.
    concatenate date 'SomeText' time into str separated by space.
    write:/ str.
    Regards,
    Rich Heilman

  • As of version 31, why is there still no Thunderbird option to insert current date and time in message that you are writing?

    As of version 31, why is there still no Thunderbird option to QUICKLY insert current date and time in message that you are writing?
    Literally have seen this very-much-needed -- and used -- option "promised" for three years now, and even if there's only one or two formats that could be used, at least the option is there.
    It seems only way is to link a Macro and tool to Thunderbird and do it that way.
    Joe Rotello
    [email protected]
    Skype: joerotello

    Where was it promised? A quick search of Bugzilla didn't find a functionality request bug report for it.
    I assume you're aware that Mozilla stopped development about 2 years ago (just adds security/stability fixes and provides infrastructure) and all new features and bug fixes are now added by the community. They seem pretty tied up with bug fixes and reworking some hard to maintain components such as the MIME support.
    Have you tried the Timestamp add-on at https://addons.mozilla.org/en-us/thunderbird/addon/timestamp/ ? The version at AMO doesn't support versions later than 2.0 so you'd need to do something like install the disable add-on compatibility checks add-on at https://addons.mozilla.org/en-us/thunderbird/addon/checkcompatibility/?src=ss, and ignore the warning message about Timestamp not being compatible. However, the author has a version at http://extensions.sanjer.nl/?page=tb_ts that supposedly supports up to Thunderbird 11.9.x so it should be "compatible by default as it supports version 5 or later and is not a binary add-on like Lightning or Enigmail.
    "For Thunderbird use the context menu (right click popup) in the compose window, Ctrl+Shift+T or "Options | Insert timestamp" to inserts the date/time into a message"

  • Aperture 3.0.3 Adjust Date and Time

    Working on a batch (~3K) scanned images that all need to be adjusted for date and time, the adjustments and so forth. All notes below is with Master images.
    My observations so far with the unpredictable "Adjust Date and Time" function, "D&T" hereafter and some suggestions on improving Aperture.
    0. Always make sure that you start by "edit->deselect all" - even if nothing is selected.
    APPLE: PLEASE MAKE IT SIMPLER TO SEE WHAT IS SELECTED (MASTERS, VERSIONS, etc).
    1. Always use US language selection - Language selection seems to matter for D&T. I am from Denmark, living in US but often switch between US and DK language (to get some special characters). In Denmark we use dd-mmm-yyyy and in use we use mmm-dd-yyyy. When i use the danish locale with the "D&T" function Aperture D&T is totally unpredictable - so stick with US.
    APPLE: PLEASE DONT BE TOO SMART BUT USE THE D&T FORMAT LISTED IN THE D&T DIALOG BOX
    2. D&T time-shift does not work. Unfortunately this 'capability' cannot be disabled - Somehow Aperture check what the time was originally stamped on the image and use this for the new "D&T" - first i though that this was adjusting ~1 sec between images but it seems that Aperture do something like the following (sorry for my non-applescript'ish examples below)
    newTime = "edit->adjust date and time"
    foreach image do
    set time to image.D&T.time
    try() change image.D&T.time newTime+image.D&T.time
    catch () newTime image.D&T.time
    Not good as it time-shift from the original picture - if the time is good this is not a problem but if time (from the stamp) is off (like all of mine) most likely the time will get the date to wrap into the next day (or year if you got a bunch of images)..
    APPLE: PLEASE ADD AN OPTION TO DISABLE TIME-SHIFT in D&T
    3. Dont include DNG - Aperture cannot change the date for a dng and it seems to screw up the time-shift in "D&T" - i think the algorithm do something like
    newD&T = "edit->adjust date and time"
    for each image do
    set D&T to image.D&T
    try() change image.D&T to newD&T
    catch() newD&T = image.D&T
    The problem seems to be that when Aperture work on a image it cannot change it use this images (that it cannot change) D&T for the next images D&T, i got a bunch (a ton actually) of examples
    1994
    1994
    2008.dng
    2008
    When using a different language locale it gets even worse.
    APPLE: PLEASE DO NOT CHANGE THE D&T COUNTERS WHEN WORKING ON A FORMAT NOT (WELL) SUPPORTED.
    4. Always check your trash for images - after i deleted projects (empty, no images) i have found images for those projects in the trash. Cannot explain why this is but i am happy that i checked the trash before emptying - put back works just fine.
    I am currently using the following methodology for my scans.
    1. load in all pics, create albums for years and projects for months - e.g. 1993.0201 <text>, 1998.0327 <text> and sort scans to the correct albums and projects
    2. export each album as separate libraries, open library, fix D&Ts, places and faces. Exit, reopen and check trash for images that should not have been deleted. Clean trash, close.
    - For faces i add a few pics' of recognizable folks - open faces and select from the many suggestions aperture offers - very fast.
    3. Open or import library to master (my master got ~20K pics currently)
    I am interested in learning if i am the 'only one' with Aperture D&T 'problems' or if i am using the tool incorrectly.
    Kenneth

    nathan:
    What type of edit were you making. Have been trying to duplicate that and cannot. I've changed the date and selected the original file to be changed also. Then I edited the file by cropping, changing the exposure and shadows and saving. Both versions are still tiff files.
    Now these are tiff files that I converted over from jpgs with Photoshop as my camera doesn't take tiffs. Don't know if that will make any difference.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Manipulating imports or photos events dates and times

    It's a simple question and obviously related to the subject, but I'm trying to find out if it is possible to manipulate imports of images from an I device, we have an Apple Mac that has images on spreading over 3years, obviously with the event dates and times logged, but between each of the photos there are thousands of other images, therefore I would like to know if it is possible to slip images into iPhoto between these thousands of images and alter the date and time of the import or image
    plus is there any way I can bring import logs up within iPhoto?

    iPhoto has two ways to change the date of photos.
    From the Photos menu select "Adjust Date and time". That will let you shift the dates of all selected photos by a fixed amount.
    Or use "Photos > Batch Change". This way you can set the date of photos to a fixed date and time, with a optional increment between the photos. This is very useful for scans, where no capture date has been recorded.
    To change the dates of events, change the date of the photos inside, or split the events, if you want to insert a different event in between. You can split an event by sorting the photos according to date and selecting a photo in the event. Then use the command "Events > Split event".

  • I have checked the box "display date and time on the Menu Bar" and it does not work.  Using OS X Yosemite 10.10.2  Anybody have a fix?

    I have checked the box "display date and time on the Menu Bar" and it does not work.  Using OS X Yosemite 10.10.2  Anybody have a fix?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • IMovie 9.0.8 "date and time" Title is 5 hours off original footage.

    Since iMovie doesn't import the original Date and Time that the footage was recorded, I have been using the "date and time" Title feature, which in prior versions has worked well. Since updating to ML and iMovie 9.0.8, the time is off by approximately 5 hours. I can usually correct this by adjusting the date and time in the frame but it's an extra step I'd rather avoid. Has anyone else experienced this glitch? Is there a fix?

    ablyes wrote:
    …i already tried a frensh install of mountain lion
    I recommended a re-install of the app, not of the OS
    …  what do you mean by adding some MacOS Voodoo ?
    do, what I wrote: re-launch your Mac while holding down the shift-key
    this triggers the Safe-Mode, which is recommended by Apple as a maintanance-routine  (best done before any updatres) ....
    I called it 'voodoo' as some joke ...

Maybe you are looking for