Ship-To not assigned to Sold-To, even though able to create an order

Hi,
We have a peculiar scenario.
We have a Sold-To Ex: 1100, ship to 1200 and 1300 for a sales area, ex 1000-10-10. Here only 1200 Ship-to is assigned to Sold to 1100. ( SH 1300 is not assigned to SP 1100).
I am able to create an order for 1100 and 1200 for the above sales area, it is fine with the system.
But system is allowing me to create and order for 1100 and 1300 toooo. As per my knowledge system should not accept this order and system should give us a message like this "ship to is not maintained for this sold to" or some thing like that.
This is happening in ECC6.0. As i already checked with the system there is no enhancement or user exits used. Is it standard behavior of ECC6.0 or is there any solution for this problem.
Any help help form any one so much help full.
Thanks
Venkat Cheedalla.

Hi Venkatesh,
You can do this in Customer Master of Sold-to party: 1100. In master, go to Sales Area Data Tab --> Partners Tabstrip. There you will find a Ship-to-Party Customer Code. Here change the 1100 code to 1200. Then Save.
Now while creation of Sale Order, system will automatically give you the Ship-to party as 1200. And if you want to change that Ship-to Party, then system will give you an Information message that Ship-to needs to be redetermined.
If you want that this Information Message should come as Error Message, then I think some customizations needs to be done in SPRO.
Regards,
Vishal

Similar Messages

Sales Order creation with Ship to not assigned to Sold to

Hi There,
I have an issue that I am able to create an order with a Ship to which is not assigned to Sold to. i.e, The sold to accepts any ship to and not giving any error. I am giving both Sold to and Ship to together while order creation. Is it because of this? Should I enter sold to and then press enter for the list of Ship to's assigned to that? I dont find any issues in the Partner determination.
Can you help?
Thanks in advance,
Renjith

Hi Renjith,
I agree with you that SAP allows you to enter any ship to(belonging to sales org of sold-to party) for a given sold to party.
To meet your requirement, You may like to use the Userexit MV45AFZZ (Form USEREXIT_SAVE_DOCUMENT_PREPARE) to check the Ship-to while saving. Thus a comparison could be made with assigned Ship-Tos for the given Sold-to party. In case there is a mismatch throw a error message before allowing committing of save.
Your developer would be able to help you to achieve this
Please let me know if this helps
Warm regards
Harpreet

Ship to party not assigned to sold to party still can i create a sale order

Hi ,
For example i have a ship to Party B who is not assigned to Sold to Party A . System is allowing me to create a sale order for the above mentioned "Sold to" and "ship to" combination. What is the logic behind this ? is it a provided functionality or a bug?

hi,
for example if you are using account group 0001, when you create a customer it has the ability of picking up a SH, BP and PY along with SP. this is the underlying config at account group. Now for SP 100 the ship party can 100 or 200 ... or you can modify at the order level. Its not necessary that 200 has been identified at the customer master creation level itself. But partner function SH shoudl be availble in the account group with which the customer is created.
regards
sadhu kishore

Error Message while ship to party is not assigned to sold to party in VA01

Hi All,
In VA01, i need to throw an error message while giving a ship to party, which is not assigned to sold to party.
I tried in EXIT_SAPLV09A_001
              EXIT_SAPLV09A_002
              EXIT_SAPLV09A_003
              EXIT_SAPLV09A_004
above user exits, but i couldnt find the solution.
if possible provide with the code.
i appericiate the early response.
Regards,
Kumar.

User exit MV45AFZB, form-routine USEREXIT_CHECK_VBAK.

Why is my iphone 5 not using default ring tone even though it is set for my personal tone in defaults!!

Why is my iphone 5 not using default ring tone even though it is set for my personal tone in defaults!!

Hello Rob,
Welcome to the Apple Support Communities. You may have a contact that has a different ringtone assigned to it. Just navigate to the contact and see what ringtone is assigned to them.
iPhone: Ringtones
http://support.apple.com/kb/ta38610
Setting Ringtones
In addition to the default ringtone, you can assign individual ringtones to people in your contacts so that you can tell when a particular person calls.
Alternatively you can reset all settings in Settings > General > Reset > Reset All Settings. This would put your iPhone at factory default on everything settings wise and it does not touch the data on the phone
Regards,
-Norm G.

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.

Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open  > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there

My macbook 13 pro is not connecting to the internet even though the airport says it's connected. Can someone help me?

My macbook 13 pro is not connecting to the internet even though the airport says it's connected. Can someone help me? My iphone and other macbook connect and work no problem. What steps can I take?

Ok....
Now go to your router's settings. Not sure who makes your router...
Look at wireless part of it and see how many computers are actually hooked up to it.
Delete your computer from it (in your router).
Restart your router.
After your router has restarted, try to connect to it with your MB and see if you can browse the net.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static manually and still can not get it to connect even though it registers as connected.

Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.

Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon,

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

ITunes music files cannot be edited, and new music files imported. The messages says I do not have enough access privileges even though I am the administrator of the system.

Since installing the latest version of iTunes all my music files cannot be edited, and I cannot import new music files into iTunes. The messages says I do not have enough access privileges even though I am the administrator of the system. If anyone can help me sort this out I would be really grateful. I have checked the read and write privileges for all the iTunes folders and it all seems in order so I can't understand it.
In general, I am getting really frustrated with Apple. They seem to be getting ever more controlling in their approach to their consumers. I need to edit music file information as I am a dj. And why can't I import music, unless I buy it from iTunes? Most of all, why can't I use the devices I paid a lot of money for in the way I want to use them, and not be forced to coerced to use apple's fee paying services (iCloud, iTunes).
I have used apple computers since the early 1990's, but in the last year I have gotten rid of my iPhone and my iPad and replaced them with Android devices. Much better and much less control. Perhaps it is time to switch from Apple altogether.

Hi
Read this About Disk Utility's Repair Disk Permissions feature
and OS X Mavericks: If you don’t have the correct permissions to open a file or folder
Does this help?
Jim

When trying to update my Iphone ios version I got an error message saying I`m not connected to the internet even though I`m connected

Hi
when trying to update my Iphone ios version I got an error message saying I`m not connected to the internet even though I`m connected
thanks

Hi there ramerr,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W.

When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7

When my phone is not plugged into the charger or computer, it will not turn on at all; even though it is not dead. When it's plugged into the computer, it will go to a white screen with a grey apple icon and then it will turn off again and repeat. IOS7 and iPhone 5.

http://support.apple.com/kb/HT1808
Try this step and if you cannot get your device into recovery mode there is a chance you have a hardware failure and you need to call apple to see what service options you have.

Songs are not showing up in playlists even though they are there

songs are not showing up in playlists even though they are there

If you've downloaded them on the iPad then they should be in the Videos app - iTunes on the iPad is just the iTunes store (the Purchased tab shows what content that you can re-download from the store and rentals can't be re-downloaded, and non-rental films can only be re-downloaded in some countries).

HT201263 itunes will not recognise my encryption password even though it has been reset. cant restore to last backup?

itunes will not recognise my encryption password even though it has been reset. cant restore to last backup?

I'm not aware of a way to reset the password for an encrypted backup. If you have forgotten the password for an encrypted backup, your only alternative is to put the phone in recovery mode and restore it as a new device. Your data will be lost.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so. This started with the latest update. I see that the desktop icon for Media Manager now has a security shield on it, and it requires UAC confirmation when you start it, which I don't remember the old version doing.
One thing I noticed, msconfig.exe shows that "C:\Program Files\Verizon\McciTrayApp.exe" is set to start at Windows startup, but the desktop icon used to start Media Manager manually has a target of ""C:\Program Files\Verizon\Verizon Media Manager\Release\Verizon Media Manager.exe" Verizon Media Manager".
I don't remember what the previous version was, but this one is 9.4.86. It asked me if I wanted to update it a few days ago, and I said yes.
I am running Windows 7 Home Premium.
Solved!
Go to Solution.

Try setting the startup option to off and then to on again. It looks to be pointing to a wrong location.
Attached is a partial screen shot of my msconfig setting.
Attachments:
media manager startup cmd line.jpg ‏18 KB

Ship-To not assigned to Sold-To, even though able to create an order

Similar Messages

Maybe you are looking for