Shipment header - Container ID field to list with the data from PM master

Hi Gurus,
In Shipment function (VT01N), Vehicle number is added manually in the field Container ID (VTTK-SIGNI) of Overview screen under processing tab.  The requirement is vehicle number should be picked up from the list of possible entries with PM Vehicle master data. (IE01)
The discussion has been done with PM consultant and understood that it cannot be done by SPRO settings. Also the other technical possibilities have been checked for doing the same and proposed for ABAP enhancements.
Is it technically possible with
1) Search help Exit
2) Screen Exit
3) User Exit/other enhancements like BADI/BAPI
Please help me in this regards.
Regards,
Anbu

Check out GUIXT at www.synactive.com.  The base version is already free with SAPgui.  GUIxt allows you to do this without any ABAP coding (..almost any ABAP coding because their "local help" is handled by a supplied ABAP program.

Similar Messages

  • Container ID field to list with the data from master in shipment header

    Hi,
    While do the Shipment VT01N, Vehicle number (ZZ05XX1588) is added manually in the field of Container ID in Shipment.
    The requirement is vehicle number should be picked up from the list of possible entries with Vehicle master data. (IE01)
    If is it possible, Please give to me details of the configuration steps and user Exit/other enhancements like BADI/BAPI.
    Please help me in this regards.
    Devendra

    Hi Devendra,
    You may get this functionality in DSD module. In standard LE-TRA its difficult to bring it from IE01.

  • How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

    I had an interview question that is:
    How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
    Set up steps so inset, update or delete operation takes place across the servers.
    It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
    Also please describe would it be different for SQL Server 2012?
    If so, then what are the steps?

    I had an interview question that is:
    How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
    Set up steps so that inset, update or delete operation gets done correctly across servers.
    I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
    Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

  • How to make the active save-to-file with the data from GPIB ?

    Hello,,everybody !!
    I want to make the active save-to-file with the data from GPIB since starting the measurement. To save-to-file at the end of measurment is somehow risky for losing the data because my measurment have to take for long time (eg. 24-48 hours).
    Thank you in advance for anybody's help !!

    Thanks Dennis,
    I have already append, I got it but still have one small problem that between each line it has the blank line. Example as below ,
    16:40:33 54.24
    16:40:34 54.23
    16:40:35 54.24
    I want to get rid of the blank line in between.. Do you have the idea about it ?

  • Updating a table with the data from the select list

    I have 2 select lists on a page...first select list displays vendor no and vendor name from the table vendor (vendor_no, vendor_name, address, city, state, zip, ph no)
    second list displays contact no and contact name from the table contact (contact_no, contact_name, email_addrs)
    i have a submit button...once it is clicked the vendor_no from the first list and the contact_no from the second list must be inserted into the third table vendor_contact (vendor_contact_no, contact_no, vendor_no) and also there must be a condition to check if the entry already exists or not...can any one tell me how this can be done...

    Why not design your page just on your third table (vendor_contact), and those fields (which will already be defined as part of that table) can be defined there as your select lists. Then make sure you have a Primary Key (or Unique Key) defined on the table to prevent duplicates.
    It makes for a much cleaner looking page, and far easier to implement as well.
    Hope this made sense and helps.
    Bill Ferguson

  • List with user data from User Profile Service

    Hi there!
    I got SP intranet site up and running with more then 2000+ users on it.
    User Profile Services is getting users attributes from Active Directory.
    How can i make a list with all of those users and columns like Department, Manager, Office number, etc.. 
    After that i'm going to apply a filter by current user department.
    I would really appreciate some offer.
    Thanks!

    There is a sharepoint hidden list called User Information List , if you want to filter by current user department I recommend that you use ser search API and search People using SourceID 
    public static ResultTable SearchUsers(string query,int limit,string [] selectproperties)
    KeywordQuery kq = new KeywordQuery(SPContext.Current.Site);
    //select properties
    foreach (string property in selectproperties)
    kq.SelectProperties.Add(property);
    kq.SourceId = new Guid("B09A7990-05EA-4AF9-81EF-EDFAB16C4E31");
    kq.QueryText = query;
    kq.RowLimit = limit;
    ResultTableCollection results = new SearchExecutor().ExecuteQuery(kq);
    return results.Filter("TableType", KnownTableTypes.RelevantResults).FirstOrDefault<ResultTable>();
    you need to pass the query Department:CurrentUserDepartment and to get current user department 
    UserProfileManager manager = new UserProfileManager(SPServiceContext.GetContext(SPContext.Current.Site));
    UserProfile currentUser = manager.GetUserProfile(SPContext.Current.Web.CurrentUser.LoginName);
    string department=currentUser["Department"].toString();
    Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

  • How can i populate the Jcombobox with the data from my jpa list? Desperate

    I need to populate my jcombobox with data from my jpa. This is my first time trying this and i just need some sample or a quick solution to this. Thanks in advance
    <code>
    public static MyNames myNames() {
    EntityManagerFactory emf = Persistence.createEntityManagerFactory("JavaTrialsPU");
    EntityManager em = emf.createEntityManager();
    em.getTransaction().begin();
    Query q = em.createNamedQuery("MyNames.findAll");
    MyNames n = (MyNames) q.getResultList();
    return n;
    public static void myCombo() {       
    comboBox = new JComboBox(????--how can i make the jcombobox display my myNames() list--?????);
    frame.add(comboBox, BorderLayout.PAGE_START);
    </code>

    Implement toString() on your entity to return whatever you want to use as a label for the combobox.
    Your need for quick solutions is very destructive to your learning process. In stead take the time and read around a little. Swing happens to have an excellent tutorial with many example programs readily available for you to pick through:
    http://docs.oracle.com/javase/tutorial/uiswing/
    And PS: you need to use \ tags in this forum.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • My wafe has an ipad and just got an iPad 2.  How do I activate the new one with the date from her old one?

    My Wife has a new iPad 2, how do I transfer the date on her iPad to her iPad 2?  I found some instructions and it instructs me to use a computer.  The only other computer I have is a windows os laptop.  What is the best method?

    You should use a computer with a reasonably current version of Windows (or Mac OS X for an Apple computer).
    Load the current version of iTunes (free) which you can get at http://www.apple.com/itunes
    Sync her old iPad using iTunes.  Do that by opening iTunes and plugging her old iPad into the computer using the USB cable that came with the iPad.
    Then plug the iPad 2 into the same iTunes and let it sync.  One of the options (since you say it's new) will be to restore from the old iPad.

  • How do i replace my macbook's iCal data with the data from my iPad?

    hi,
    recently i decided to try iCloud and well, i didn't quite like the duplicates~
    so i've decided to opt out, but i accidentally selected "keep all data" when i turned it off~
    now i'm stuck with duplicates after i've sync-ed my iphone to my macbook~
    i would very much like to replace all the ical data on my macbook with my ipad (it's my only set of "original" data)~
    i do know there's an option to "replace all data on my ipad with my macbook" but how about vice versa?
    any suggestions?
    ~K

    Greetings Kyrie,
    iCloud does not inherently cause duplication of calendars.  Once you have a good set of data following these steps you may want to consider trying iCloud again after first flushing all the bad data out of the cloud (meaning deleting all the calendars from icloud.com).  But first things first:
    If the iOS device is the only place where the data exists, proceed with caution.
    Backup your iOS device: http://support.apple.com/kb/HT1766
    Create a new admin user account on your computer: http://docs.info.apple.com/article.html?path=Mac/10.7/en/mtusr001.html
    Go to Apple > Log Out
    Login to the new account
    Sync the iOS device in the new user and merge all data (not replace)
    Launch iCal in the new user -- If the calendar database on the iOS device is intact you should see all the calendars here in iCal.
    Highlight each calendar on the left hand side one at a time and then go to File > Export > Export and save the resulting file to desktop. Repeat this process until you have exported all the calendars you want saved to the desktop.
    Quit iCal
    Put the .ics files you created on the desktop into Macintosh HD > Users > Shared (You can get there by going to "Go" > "Computer" at the top of the computer screen.)
    Go to Apple > Log Out
    Login as the main user account
    Go to Macintosh HD > Users > Shared and drag the ics files to the desktop of your user account.
    Open iCal and add one new empty calendar by going to File > New Calendar > On My Mac.
    Delete all the other calendars that have the bad data in them.
    One at a time, double-click the ics files on your desktop and choose "New Calendar" from the resulting drop down menu. (This will create a new fresh calendar in iCal and import the contents of the ics file into that calendar.)
    Hope that helps!

  • How can i update my new iphone with the data from my old iphone?

    I recently bought an iphone 3GS after my iphone 4 was stolen but when i try to sync the new phone it says the software is out of date. (when i was telling the guy at the apple store about my phone being stolen he said when you get a new phone just sync it to retrieve all the information stored on there. Is there any way i can retrieve the stuff from my old phone? I would like my messages, notes and apps from my old phone on my new one.

    Just to make sure - You're saying you had backed up your iPhone 4. When you plug in the 3GS, and try to "restore" the data from the iPhone 4 backup onto the 3GS, you get that error? Check to see if the iOS version is up-to-date, and hopefully it isn't. It might also be because your iPhone 4 wasn't, and is causing some sort of problem.
    Good luck!

  • Generating .csv file with the datas from the database

    Hi Java experts,
    Ihave a current assignment to generate a .CSV file using java getting values from database. The output CSV file may have more than one row and each row should have a end of line delimiter. Any help in giving a template for generating a CSV file accessing from database is greatly appreciated.

    Ihave a current assignment to generate a .CSV file
    using java getting values from database.well, I hope you learn something doing it yourself...
    The output
    CSV file may have more than one row and each row
    should have a end of line delimiter. Any help in
    giving a template for generating a CSV file accessing
    from database is greatly appreciated.How about looking for a JDBC and a file/print stream tutorial?

  • Printing Smartform with Table data from PrintProgram

    Hi,
      Can any one explain the steps involved in printing the Smartform with the data from the Print Program table. How to fit table in the Smartform i.e, while designing the Smartforms layout for the table.
    Thanks & Regards

    Hi,
       As  data is coming from the print program in the table. Do the following procedure
    1. In the form interface ---> Declare the internal table as same structure as in the print program. for ex: you r passing MARA table data then declare it as itab type table of mara.
    2. In the window you want to create the table, right click > create> table.
    3. Go to data tab give the internal table name and work area .
    4. Now go to General tab-->Details.
    5. Declare the line types.
    6. Right click on header/main area/footer -->create table line.
    7. Now give the line type which you want to use.
    8. In the displayed columns>right click> create text node.
    9. In the text node &mara-matnr&.
    Procedure to create line type:
    1. Double click on table
    2. Go to table tab --> details
    3. Give the table width (width you want to display on the screen should be less than or equal to the window width).
    4. Line type --> Divide this into no of column you want to have in header/item.
    Note: total length of all columns should be equal to the table width.
    5.save.
    Br,
    Laxmi

  • Problem with the% deviation from Project Server 2010 field

    hello
    I have a problem with the% deviation from Project Server 2010 field.
    Within a file or project, this project contains tasks.
    Each task has completed the field% deviation.
    Within the row "Summary" in the field of% deviation does not perform the sum of all fields of tasks.
    Only occurs on certain projects, these projects have the view of PR Progress Report
    Anyone know happens?
    thank you very much

    Hi
    Sorry, I'll be more specific now.
    Within the field% deviation. Your settings in PWA is:
    The formula for field% Deviation:
    Str (IIf ([Job baseline] = 0; IIf ([Working] = 0, 0, 100); IIf ([Working] = 0; -100; Int (100 * ([Job] - [Work Online base]) / [Working baseline])))) + "%"
    Under the heading rows Calculation Summary:
    > Use formula.
    Within the field Allocation Calculation of rows:
    > It is labeled the "Apply unless you manually specify".
    The field [Job] and field [Job baseline] are fields Pack project server.
    The error is in project, in the list of tasks.
    In the top row, this row summary makes the sum of the ranks of the tasks of the file.
    But in my case only in the summary field the same value appears in the tasks.
    In all the cells in column% deviation appears the same value.
    I hope it helps.
    thank you very much

  • List of material number with PO text from material master

    I want to get a list of materials number with PO text from material master. Can anybody help ?

    The purchase order texts maintained in the material master are stored
    as SAPScript text files in tables STXH (header) and STXL (lines). For
    material master records:
    Field TDOBJECT = 'MATERIAL'
    Field TDNAME = material number (MARA-MATNR).
    So you should be able to write a small report to extract the data.

  • Create a list with associated workflow from a list template.

    Hi,
    I have a calendar list with two workflows and I saved it as list template. Also I have an event receiver which creates a list based in this list template I created, but I noticed that the list is created without workflows. If I create the list
    using the list template using SharePoint it does it with the workflows but my event receiver does not.
    Here is my code:
    if
    (list == null){
    web.AllowUnsafeUpdates =
    true;
    var lstTemp = web.Site.GetCustomListTemplates(web);
    var template = lstTemp[listTemplate];
    var listId = web.Lists.Add(listName,
    string.Empty, template);
    list = web.Lists[listId];
    list.Title = listName;
    list.OnQuickLaunch =
    false;
    list.Update();
    web.AllowUnsafeUpdates =
    false;
    Thanks anyway.

    Hi,
    According to my understanding, you have a list template contains workflow, you can create a new list with this template from UI. However, when create a list with this
    template in Event Receiver, the workflow is missing.
    I tried to reproduce by creating a list template contains an OOTB Approval workflow, then use an Event Receiver to create a list with this template, it turned out
    that the workflow is attached to the newly created list.
    I would suggest that you create another Event Receiver with the code snippet below to see if it is an issue of Event Receiver:
    public override void ItemAdded(SPItemEventProperties properties)
    base.ItemAdded(properties);
    createListWithTemplateWithWF(properties);
    public static void createListWithTemplateWithWF(SPItemEventProperties properties)
    using (SPSite site = properties.Site)
    using (SPWeb web = site.RootWeb)
    SPListTemplateCollection listTemplates = site.GetCustomListTemplates(web);
    SPListTemplate listTemplate = listTemplates["ListTemplate_List001_withWF"];
    web.Lists.Add("List005", "List005", listTemplate);
    Feel free to reply with the test result or if there any questions about this.
    Best regards,
    Patrick
    Patrick Liang
    TechNet Community Support

Maybe you are looking for