Shipments/ Delivery Document tracking with Purchase Order

Dear all,
Please help me in finding all the shipments accessed against Purchase order or Delivery document information with the help of Purchase order.
Is it possible to track either of them using PO?
Please help....
Thanks & Regards,
Deepthi.

This is the sales forum, not purchasing forum.
You might be able to find something in EKBE table for PO. Also check the reference document field LIPS-VGBEL on the delivery. In sales it usually contains the sales order number, not sure if it will have the PO number for the inbound delivery. If not, check other fields in LIPS.
There is no direct link between shipments and orders. You'll need to find the delivery first and then the shipments for it. Delivery numbers will be in VTTP-VBELN, VTTP-TKNUM is the shipment number.

Similar Messages

  • Shipment cost documents in automatic purchase order

    Does somebody can help me about a shipping problem ?
    While transferring shipment cost documents to FI-co with automatic generation of purchase order, SAP create one purchase item order for all my shipment cost documents. Is it possible to customize the purchase order to get 1 item  purchase order by shipment cost documents ?
    In my case, i have 1 purchase order with only one item that contains several entry sheet..
    CMA

    Hi AP,
    Thanks for your reply. When you said "it will be possible to create multiple service entry with reference to the same purchase order."
    I'm agree with you but all the services entry with reference to the same purchase order are grouped on the same item post.
    In my purchase order I would like to have one item by services entry.
    I expect to to have 1 purchase order with several item ( one for each shipping)
    1 services entry = shipment cost document =  1 Shipping.
    Is it possible to do that with SAP in standard ?
    It exists a lot of oss notes on this topic but they don't solved my problem, and sap documentation is not clear on this topic.
    CMA

  • Print document type Q02( technical delivery terms)  with Purchase Order

    Hi all
    1) I have activated the QM procurement for a certain material and I have assigned the control key that makes mandatory the technical delivery terms on the material master (standard control key 0002).
    2) I have created a Document Info Record Q02 to hold the Technical Delivery Terms assigning a PDF file. Document is released.
    3) I have assigned the DIR to the material master (object link in the DIR).
    I would like to know how to print the this DIR with Purchase Order. I am testing this scenario in IDES system and the form does not get printed.
    Could anyone please advice how to get the PDF file printed with the purchase order?
    Thank you

    Hi Sappmqm,
    There is no internal way, you would have to create an ABAP program to handle this function, where it would search the material record to pull the DIRs linked and then open them on user's screen for printing.
    Additional SAP add-ons are available as 3rd party apps, can click my name and contact me for more detail if you like.
    Good luck.

  • Problem with Delivery Type Determination in Purchase Order

    Dear All,
    We are working on a IS-Retail Scenario where we are dealing with generic articles. While creating a PO, we have encountered an error which says:"Also specify a delivery type in case of shipping data relevance". The error message number is MEPO 099. We have checked that Delivery type NL is attached to the document type under the supplying site customizing, and supplying site is attached to the receiving site with the correct document type. Can anybody throw some light on what we might be missing out in this scenario?
    Thanks and Sincere Regards,
    Amitabha

    Hi
    I suppose you are creating a retuns PO ,
    Please maintain the customizing of the same in SPRO-> MM -> Purchasing-> Purchase Order-> Returns Order-> Store Return / Return Plant to Plant
    here you need to maintain the delivery type for returns.
    This message is trigerred only in case of Returns order
    In SAP Retail, plants are referred to as distribution centers or stores. With store returns, you can map the return delivery of goods from
    a store to a distribution center (this is the most common case),
    from one distribution center to another distribution center,
    from one store to another store,
    from a distribution center to a store (although this is not very common).
    Requirements
    For the return delivery types, you have to make settings for the item category determination.
    Partner schema must be assigned to the return delivery types.
    The relevant goods movement types must be assigned to the schedule line categories (for the returns in Sales). The following schedule line categories are also available in the system:
    NR - Replenishment Returns and
    NS - Replenishment Cross Company Returns
    Activities
    Assign the required return delivery type to
    purchasing document category F (purchase order),
    purchasing document type (NB - standard purchase order, UB - stock transport order),
    the supplying plant (the one to which the goods are being returned)
    The following return delivery types are available in the system:
    NLR - intra-company-code store returns (purchasing document type UB for replenishment and return orders, delivery type NL for the replenishment delivery)
    NCR - cross-company-code store returns (purchasing document type NB for replenishment and return orders, delivery type NLCC for the replenishment delivery)
    Please maintain the required customizing
    Thanks & Regards
    Kishore

  • Issues with Purchase order change documents

    Hi Gurus,
    I have some peculiar issues with Purchase order. The PO line item has deletion indicator set but I can't find who set the deletion indicator. The PO change documents doesn't show anything related to deletion indicator.
    Please help to fix the Issue.
    Regards,
    Senthil

    Hi
    Check it in Tcode SE16
    Table Name CDHDR and CDPOS
    Regards,
    Raman

  • Facing problem with integrating Advanced Pricing with Purchase Order

    I have followed the steps provided in the documents available online. But during creation of Purchase Order the price is not getting picked up from the price list. Can anybody share the steps necessary to resolve the issue.

    Hi
    I suppose you are creating a retuns PO ,
    Please maintain the customizing of the same in SPRO-> MM -> Purchasing-> Purchase Order-> Returns Order-> Store Return / Return Plant to Plant
    here you need to maintain the delivery type for returns.
    This message is trigerred only in case of Returns order
    In SAP Retail, plants are referred to as distribution centers or stores. With store returns, you can map the return delivery of goods from
    a store to a distribution center (this is the most common case),
    from one distribution center to another distribution center,
    from one store to another store,
    from a distribution center to a store (although this is not very common).
    Requirements
    For the return delivery types, you have to make settings for the item category determination.
    Partner schema must be assigned to the return delivery types.
    The relevant goods movement types must be assigned to the schedule line categories (for the returns in Sales). The following schedule line categories are also available in the system:
    NR - Replenishment Returns and
    NS - Replenishment Cross Company Returns
    Activities
    Assign the required return delivery type to
    purchasing document category F (purchase order),
    purchasing document type (NB - standard purchase order, UB - stock transport order),
    the supplying plant (the one to which the goods are being returned)
    The following return delivery types are available in the system:
    NLR - intra-company-code store returns (purchasing document type UB for replenishment and return orders, delivery type NL for the replenishment delivery)
    NCR - cross-company-code store returns (purchasing document type NB for replenishment and return orders, delivery type NLCC for the replenishment delivery)
    Please maintain the required customizing
    Thanks & Regards
    Kishore

  • Goods receipt through Inbound delivery for Sub-Contracting Purchase order

    Hi
    I am trying to do goods receipt for the inbound delivery /shipping notification created for a sub -contracting Purchase order. The Finished product and the component part are batch managed, When I try to perform PGR in VL32N , I am getting a blank screen as error message and Goods receipt is not getting triggered . I checked for OSS note and found 645119 close to my issue but not an exact match . We are in ECC 6.0 with EHP 4. Can some one clarify whether it is possible to post GR through inbound delivery for a Subcon Purchase order .
    Thanks in advance for your immediate response.
    with regards,
    Joseph Anand B

    Hi, The issue may be due to this - the component is batch managed but the batch data is blank in the component list of the Purchase Order Item. Or a batch is maintained in the PO item component list but the stock for the same batch is not available with Vendor, i.e. stock with some other batch may be available.
    In a receipt for Sub-cont PO, 101 happens for FG and 543 happens for component. But there is no option to provide the component details in a delivery. So in standard system, when 101 happens via a delivery, 543 will be posted in the background. So any error in posting 543 will result in a blank screen without any error message.
    You can fix this by maintaining correct batch in the PO component list.
    But there is another issue - you cannot do 'cancel posting' and 'return delivery' for this receipt. Only you can reverse the inbound delivery and you should know that the  recevied stock shouldn't have been processed to do reversal of inbound delivery.

  • Address no. in delivery address tab of purchase order

    I want to know where is delivery address maintained. I am creating a po with item category K.
    I want to change the delivery address. When I save po. it gives address no. in delivery address tab of purchase order.
    I want to know what is the tcode for maintaing address.
    Is this customisation or master data maintenance.

    Hi,
    I am working on CR in which I need to change the delivery address.
    The purchase order I am referrring is having account assignment category K, without material no. & storage location.
    Plants and storage locations have addresses in the system.
    With what respect we will maintain address in tcode MEAN.For example plant. ?????
    Because in MEAN I create address and save but how this address will pick up in PO.
    Edited by: KiranCG on Dec 8, 2011 7:41 AM

  • In MIGO, i need to see delivery dates from the purchase order

    Is there a way to see in transaction MIGO, the delivery dates from the purchase order?  I hope there is some exit or BADI or BAPI or .... to perform this copy function? 
    We have multi-line POs for the same material with staggered delivery dates and the Warehouse needs to know which PO line to receive against.

    when you enter the PO number in MIGO and hit enter, then you only get the items that can be received.
    If you make sure that the PO items are created by ascending delivery date, then you can always take the first.
    if you have the personal setting to display all items (even the already received ones), then you can take the first with a quantity proposal. already received items do not propose quantities.
    I would ask purchasing to tell the vendor that he has to state the PO number along with the item number in all papers (delivery note, invoice).

  • MIRO: posting to G/L Accounts with purchase order reference

    hello
    our company want to post an invoice for other expense in MIRO through the tab "G/L Acconunt" and don't through the tab "PO reference".
    our problem that when we post through "G/L Account" how we allocate the "purchasing document" to the line of G/L Account?
    in miro there is an option to create a posting line with purchase order reference to a g/l account and i read the documentation that says proceed as follows:
    1. choose miro
    2. enter header data as required
    3. allocate the invoice to a document and check the items to be settled - i don't underdand what i need to do in this step?
    4. choose the tab page g/l account
    5. enter data as requierd.
    thanks
    meir

    hi
    in the table below your MIRO screen you will see PO Reference on this tab select the item of the PO that you need post for this PO, in the tab G/L account you can make manual post aditional to the PO, also you can in the tab PO reference modify amounts and quantity if you need, but it is not recommended

  • Kanban with purchase order : avoid manual change status to full

    Dear guru ,
    i use a kanban with purchase order.
    When I enter status empty (using for example PK13N) the system create purchase order.
    I want to avoid that the users enter status full using PK13N or PKBC .
    The users execute goods receipts against purchase order using MIGO in order that the system trigger status full automatically.
    How can I avoid that users change manual status to full using PK13N or PKBC ?
    Thanks.

    We have this scenario and to solve that we did a development. I heard in the past that even you can configure it on SPRO it doesn't work.
    I made some tests recently but I didn't get any positive result. We did tests entering the kanban id into the inbound delivery and post through vl32n and migo but it doesn't work.
    Regards
    Eduardo Chagas

  • Quotation Attachment with Purchase Order

    please guide me how to attached the quotation with Purchase order
    regards

    hi
    there will be 2 types of attachment is there
    1       you can copy sales order from the quotation then the document referance is the remarks coloumn.
    2  If you want to attach the External quotation (it ia in any format . like *.Doc *.pdf  etc.,,)
    you should create the UDF called the Link  that UDF type should be general  then structure should be link
    then in the sales order if you click on that table you can able to attach the file
    Gopi

  • How I can find the  Delivery address changes in purchase order

    Hi Friends,
    How I can find the  Delivery address changes in purchase order
    item details.And how i can find who did ths changes.

    Hi,
    Go to ME22N, here select the line item and click on menu "Environment > Item Changes" to track the changes.
    For multiple POs, go to ME2N, here enter Selection Parameter as "ALLES" and execute the report to check all the changes.

  • One Outbound delivery document per multiple sales orders

    hi,
    We are trying to acheive to create one outbound delivery document for multiple sales order with some custom logic in user exit (which exit to use).
    Is it possible? If so can you please give some inputs?
    thanks
    Manohar

    Chk out the following link for the relebant userexit.
    https://wiki.sdn.sap.com/wiki/display/ERPLO/SDUserexits
    Regards,
    AK

  • NEED VL02N VL09 USER-EXIT FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER

    I NEED VL02N VL09 USER-EXITS FOR DELIVERY COMPLETE INDICATOR IN PURCHASE ORDER POSITIONS.
    F.X: IF POST QUANTITY 10, BUT PURCHASE ORDER POSITION QUANTITY 30, I NEED AT ANY CASE TO SET DELIVERY COMPLETE INDICATOR FOR RELEVANT OUTBOUND DELIVERY AN P. ORDER POSITIONS.
    THANKS/

    Hi Malka,
    It's possible set the system to mark automatically the delivery completed indicator.
    First you need to set the under delivery and over delivery tolerances.You do this in customizing:
    Materials Management under Purchasing -> Material Master -> Define Purchasing Value Keys.
    Once you set this, you can insert this value keys on Material Master Record for the materials.
    When you create the PO with a material with this value keys set the system will check the under delivery and over delivery set on customizing.
    In customizing you also have the option to let the system mark automatically the delivery indicator based on delivery tolerances set.
    In Customizing for Inventory Management and Physical Inventory under Goods Receipt -> Set Delivery Completed Indicator, you can determine for each plant whether the system automatically sets the delivery completed indicator for delivery quantities within the underdelivery and overdelivery tolerances.
    You can test setting the under delivery for 0 (with a warning message) and see if the system will only mark delivery complete only for over delivery.
    You can also work with the following Badi: MB_GOODSMOVEMENT_DCI. This Badi also allows custom logic for setting the delivery completed indicator in a PO item.
    Message: M7 433 (The "delivery completed" indicator is set for the purchase order item)
    Regards,
    Rodrigo

Maybe you are looking for