Short dump CONNE_IMPORT_CONVERSION_ERROR in PC00_M14_CALC and PC00_M28_CALC

Hi expert,
We just upgrade to ECC6 EHP4 SP12.
When first testing the payroll driver for China and Malaysia, I got short dump:
Runtime Errors CONNE_IMPORT_CONVERSION_ERROR
Exception CX_SY_CONVERSION_CODEPAGE
Error in IMPORT statement: Change of length on conversion.
The error that occur for Malaysia is in include RPCHRTL9, form IMPORT-OLD-NATIO.
When trying to call the macro RP-IMP-C2-RL-O, the short dump raised.
The error that occur for China is in include PCHRTCN9, form IMPORT-OLD-NATIO.
When trying to call the macro RP-IMP-C2-CN-O, the short dump raised.
I have tried to debug into the program, but I could not find the root cause since we are not allowed to debug macro.
I had crawled the SDN forum and SAP notes, and still can't find the appropriate solution.
Do anyone has any idea about the short dump I got? Please kindly advice.
thank you.
Br,
Edison

Hi All,
I got the solution for this issue for my kind of problem.
In program RPU600BT_CONV_SINGLE_CL we commented the following
START-OF-SELECTION.
IF 1 = 0. MESSAGE e567(3g). ENDIF.                        "#EC *
PERFORM append_message USING 1
                              space
                             '567' "report not necessary
                             space
                             space
                             space
                             space
                             'P'.
STOP. "check note 1314769 whether conversion is necessary
After this execute the same program and we will get the old results get converted.
And one more is we should be careful in checking SAPU & SPAD transaction codes. There shouldn't be any partially implemented notes.
Think will help at least one.
Regards
Aditya Surapaneni

Similar Messages

Short Dump - CONNE_IMPORT_CONVERSION_ERROR

Hi,
We just trying to upgrade to ECC6 EHP4 SP12.
when trying to delete transactions in a company code, we are getting the short dump.
Runtime Errors CONNE_IMPORT_CONVERSION_ERROR
Exception CX_SY_CONVERSION_CODEPAGE
Error in IMPORT statement: Change of length on conversion.
The current ABAP program "SAPF020" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
I have tried to debug into the program, but I could not find the root cause since we are not allowed to debug macro.
I had crawled the SDN forum and SAP notes, and still can't find the appropriate solution.
Do anyone has any idea about the short dump I got? Please kindly advice.
thank you.
Regards,
Priya

Experts pls help me out on this...
Rgs,
Priya
Moderator Message: Please show some patience. Everybody has a day job here.
Edited by: kishan P on Nov 4, 2010 6:03 PM

Short dump in trx VL02N and MIGO after upgrade to ECC 6.0

Hello,
We are doing an upgrade from R/3 46C to ECC 6.0 and we face a shortdump in trx MIGO (upon saving the document).
DBIF_RSQL_INVALID_REQUEST
a BKPF_INSERT in program SAPLF005
The same shortdump happens when doing a Goods Issue on the SD side.
Looking at the program, this is not modyfied so I guess it is a standard SAP error.
OSS however, up to know did not respond to my message and there does not seem to be a SAP Note on this issue!
Anyone had this problem before. How did they solve it.
Thanks for any reply,
Aart

When exactly does this error appear? On save? clicking on a specific entry?
I suggest opening an OSS call for this problem, this doesn't seem to known (at least I didn't find any notes)
Markus

SHORT DUMP WHILE EXECUTING DTP.

Hi Gurus,
I have got a short dump while executing DTP the Error is as Follows.
Runtime Error: MESSAGE_TYPE_X.
Reasons for Error: 1.The installation of the SAP GUI on the present server is faulty or obselete
2.There is a error in the application program
And i have sent the sreen shot of the Short Dump to BASIS TEAM and they have replied me that they have to install some patches and it will take some time.
But i have no much time and i have to someway or the other execute the DTP and load the data.
Is there any shortcuts for this i mean to say without the involvement of Basis team that i can do in th BI System
Regards
Amar.

Hi Amar,
If the problem is with with System itself, how can we all have a short cut in that case. You may give it another trial, but you have to wait for the patches to be applied. Ask your basis team to get it done ASAP.
Thanks..
Shambhu

Short dump error report

What is the purpose of short dump error report generated by the system? What r the major parts/section of this report?

hi please look through this:
Whenever any transaction or any process is executed it hits an ABAP code.
If there is any issue in executing the code the situation is called "ABAP DUMP" or 'Short Dump'
Transaction ST22 is used to check any ABAP Dump within a given duration.
U can also fix the issue with the help of ABAP editor (Transaction Code SE38) if u r good with ABAP.
you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
sap-basis sap-basisAll Groups Ignore this text box. It is used to detect spammers.If you enter anything into this text box, no search results will be displayed.
SAP Groups > Technical-functional > sap-basis > Message
About This Group | Invite peers to join this group
<< Prev thread < Prev msg Next msg > Next thread >>
short dump----urgent
Reply from Keith Lewis on 5/2/2003 3:22:00 AM
Good explanation Joy, but it is not only limited to the current day and
yesterday. If you click on the Selection button you can select previous
days as well. In fact you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
Cheers
Keith
SAP R/3 Support Specialist
Information Services International
Tel +44 1664 41 6178 Mobile +44 7887 627818
E-mail email@removed
Archive Page - http://www.ittoolbox.com//I/sap-r3-basis.asp
Dear sreenivas
If you receive an error message in the R/3 System log (SM21), or if you
see
a terminated update in the update service analysis transaction (SM13), or
DB
realated error ,check for dumps using the dump analysis transaction
(transaction ST22), or choose Tools -> Administration -> Monitoring ->
Dump
analysis.
Transaction ST22 enables you to analyze short dumps from the current and
previous day.
The dump analysis function shows you:
What happened
What you can do
How to correct the error
The dump analysis function also provides an error ID and keywords that you
can use to search in SAPNet, as well as information about:
The system environment
Users and transactions
Transaction ST22 enables you to analyze the following data:
Date, time, user, client
Contents of system and data fields
Contents of internal tables and application tables
ST22 is a very nice feature in SAP. This is where all the system errors
and users mistakes showed up. If there is a problem that you cannot
solve and you contact SAP support, they look at this area to analyze it.
This gives us lead where to handle the problems.
Error analysis
How to correct the error
System environment
User, transaction...
Information on where termination occurred
Contents of system fields
Chosen variables
Active calls / events
Internal notes
Active calls in SAP kernel
List of ABAP programs affected
List of internal tables
Directory of application tables (contents)
Directory of data areas (administration information)
Directory of data areas (contents)
ABAP control blocks CONT
End of runtime analysis
i think this would be helpful
regards
sravani

Short Dump While Changing reservation line using BAPI_ALM_ORDER_MAINTAIN

Hello!
I have a problem changing the reservation line using BAPI_ALM_ORDER_MAINTAIN. I am very sure that I am passing all correct parameters in BAPI. It gives short dump with type MESSAGE_TYPE_X and main program "SAPLCOBC" or "LCOBCU02" and "READ_RESB_IND". at line
Satz gefunden?
IF sy-subrc <> 0.
MESSAGE x901. "n779835
ENDIF.
This dump comes only when I run my Transfers workbench for the first time, when I run it for the second time, it executes correctly and reservation line gets changed successfully.
Does anyone have face such problem or have any ideas about how this can be solved??
Please let me know if you need more information......

Hi Km,
Here is your answer:
SAP Note 1269069 - BAPI_ALM_ORDER_MAINTAIN: Runtime error MESSAGE_TYPE_X
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1269069
Also henceforth Pls try to navigate through service market place if you find Issues with Standard SAP Program as somebody else might have faced the same and there must be solution readily available.
Let me know if it helps.
Regards
Shital
Edited by: shital phadake on Mar 23, 2009 6:59 PM

Short dump in debug mode

Hi All,
We have recently upgraded our server from SAP R/3 4.6b to ECC 5.0. Whenever we are debugging any program(Both standard and Z-programs) getting short dump
in the select and endselect statements. This is happening only when we are going on DEBUG MODE only Appreciate any lights on this issue.(All programs are Unicode enabled).
Regards,
Ameer.

hi
your problem will solve if you put the break point after <b>ENDSELECT</b> statement. let the cursor not go inside the select-endselect statement. it causes short-dump.
thx
murthy

Short dump due termination in the program SAPLSNR3

Hi Experts,
While running an IP I am getting short dump, and error analysis says
An ASSIGN statement in the program "SAPLSNR3" contained a field symbol with
length 0. This is not possible. length 0.This is not possible.
can any one exlain why the IP is going for short dump,rectify the error and make the IP to run sucessful.
Regards,
Siddhardh

Hi Suresh,
Your dump is occuring due to database limit of sql statment (Native SQL) that is generated from your abap sql. The range is killing him (as you already notice).
The thread bellow have some info about this, but the solution can't be applyed to you:
To update 1 field of ztable(60 fields) for 2000 records in minimum DB hit
Maybe you can build some logic to reduce the value of two ranges (also concatenating them). Anyway, due to amount of lines involved (24.500 lines).... I don't think it is possible.
One option is filter the result on ABAP, after your SQL w/o the ranges you may try:
DELETE FROM TABLE i_glpct2
WHERE NOT ( racct IN r_profloss OR racct IN r_balsheet ).
This can raise a performance problem if the number of returned rows from database is to high.
Another option is change your database access. Where the values of the two ranges came from ? database ? If they came from database try to use INNER JOIN, this will solve the problem w/o performance problem.
Best Regards, Fernando Da Ró

Short dump ODS Syntax_Error- Urgent

My chain steps,
Load data (only PSA and Update Subsequently in data target)
Update from PSA
Delete PSA Request
Activate ODS..
While performing these steps, am getting the short Dump in ODS activation and deleting the red request "ABAP/4 Processor: Syntax_Error".

Job started
Step 001 started (program RSODSACT1, variant &0000000005515, us
Activation is running: Data target MPU09O74, from 19.886 to 19.
Data to be activated successfully checked against archiving obj
SQL: 20.11.2007 09:02:49 PJAIN
ANALYZE TABLE "/BIC/AMPU09O7440" DELETE
STATISTICS
SQL-END: 20.11.2007 09:02:49 00:00:00
SQL: 20.11.2007 09:02:49 PJAIN
BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
'SAPEBF', TABNAME => '"/BIC/AMPU09O7440"',
ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
GRANULARITY => 'ALL', CASCADE => TRUE ); END;
SQL-END: 20.11.2007 09:02:51 00:00:02
SQL: 20.11.2007 09:02:51 PJAIN
ANALYZE TABLE "/BIC/AMPU09O7400" DELETE
STATISTICS
SQL-END: 20.11.2007 09:02:51 00:00:00
SQL: 20.11.2007 09:02:51 PJAIN
BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
'SAPEBF', TABNAME => '"/BIC/AMPU09O7400"',
ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
GRANULARITY => 'ALL', CASCADE => TRUE ); END;
SQL-END: 20.11.2007 09:02:51 00:00:00
ABAP/4 processor: SYNTAX_ERROR
Job cancelled

What is Short Dump Analysis and secendry index ?

Dear Experts .
1.) What is purpose of T-codes SE30 and ST22 ?
What is Short Dump Analysis ?
2.) What is secendry index , How to use it ? How it effects the Performance of a report ?
Please it is urgent ...
Regards : Rajneesh

Hi
A dump analysis is a comprehensive list that should enable you to identify the causes and possible solutions of program errors. The ABAP Workbench generates a short dump whenever a report or transaction terminates due to a serious error. The system enters the error in the system log and writes a snapshot of the program at the moment when it terminated into a special database table called SNAP.
Dump analyses give the user or programmer information about the causes of the error that has caused the program to terminate. Experienced users can use them to identify very quickly where and why this occurred. He or she can them solve the problem.
The snapshot contains the following information:
Why the program has terminated
What caused the program termination
Where in the program code the termination occurred
What you can do to correct the error
The values of the relevant system fields when the program terminated
The calls or events that were active when the program terminated
Any other programs that are affected.
http://help.sap.com/saphelp_nw70/helpdata/en/c6/617d0ce68c11d2b2ab080009b43351/content.htm
Index: Technical key of a database table.
Primary index: The primary index contains the key fields of the table and a pointer to the non-key fields of the table. The primary index is created automatically when the table is created in the database.
Secondary index: Additional indexes could be created considering the most frequently accessed dimensions of the table.
Structure of an Index
An index can be used to speed up the selection of data records from a table.
An index can be considered to be a copy of a database table reduced to certain fields. The data is stored in sorted form in this copy. This sorting permits fast access to the records of the table (for example using a binary search). Not all of the fields of the table are contained in the index. The index also contains a pointer from the index entry to the corresponding table entry to permit all the field contents to be read.
When creating indexes, please note that:
An index can only be used up to the last specified field in the selection! The fields which are specified in the WHERE clause for a large number of selections should be in the first position.
Only those fields whose values significantly restrict the amount of data are meaningful in an index.
When you change a data record of a table, you must adjust the index sorting. Tables whose contents are frequently changed therefore should not have too many indexes.
Make sure that the indexes on a table are as disjunctive as possible.
(That is they should contain as few fields in common as possible. If two indexes on a table have a large number of common fields, this could make it more difficult for the optimizer to choose the most selective index.)
Accessing tables using Indexes
The database optimizer decides which index on the table should be used by the database to access data records.
You must distinguish between the primary index and secondary indexes of a table. The primary index contains the key fields of the table. The primary index is automatically created in the database when the table is activated. If a large table is frequently accessed such that it is not possible to apply primary index sorting, you should create secondary indexes for the table.
The indexes on a table have a three-character index ID. '0' is reserved for the primary index. Customers can create their own indexes on SAP tables; their IDs must begin with Y or Z.
If the index fields have key function, i.e. they already uniquely identify each record of the table, an index can be called a unique index. This ensures that there are no duplicate index fields in the database.
When you define a secondary index in the ABAP Dictionary, you can specify whether it should be created on the database when it is activated. Some indexes only result in a gain in performance for certain database systems. You can therefore specify a list of database systems when you define an index. The index is then only created on the specified database systems when activated

CX_SY_FILE_OPEN_MODE - short dump on production but not in Dev and Test

Hello,
I'm getting the follwoing short dump in production when I run the program which writes the data to application server. I have open data set and close data set. Same program when I in development and test I do not get any short dump. Can any know what could be cause for this.
CX_SY_FILE_OPEN_MODE
Copy paste of error analysis from ST22 short dump -
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_FILE_OPEN_MODE', was not
     caught in
    procedure "DATA_UPLOAD_APP_SERVER" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    When accessing the file "/bw/FTPOUT/BPR/OTHER/test.csv", the system recognized
     that this file is
    not open. Therefore, the file cannot be accessed.

The file could not be OPENed in your production system for a variety of reasons - no authorization, file doesn't exist etc. You should have check sy-subrc right after OPEN DATASET and if not zero, yous should not TRANSFER or READ the file and instead you should have given a message with sy-msgid and sy-msgno which would give you the reason. The dump here is simply saying that OPEN is unsuccessful, so any subsequent READ or TRANSFER would throw runtime dump, if done after an unsuccessful OPEN.

Short dump while change/display a PO ME22N and ME23N

while i try to use tcode ME21N it works but when try to use Tcode ME22N and ME23N it gives me a short dump
as i have pasted the short dump screen shot in this thread please have a look and reply .
offering points is against the forums RoE
Message was edited by: Suhas Saha

Did you check for OSS notes (as this seems to be a standard program) - e.g. 1930814 - Exception NOT_FOUND in the program /NFM/SAPLSELECTS. If no OSS note solved the problem, then raise an OSS message.
Regards,
Raymond
PS: And don't promise points, it's against The SCN Rules of Engagement

ST22 - Short Dump in Sales and Distribution Configuration after Upgrade to EHP5

Steps for Reconstruction
In the IMG when trying to do Sales and Distribution customising i.e. when trying to
create a new Sales Document Type the Short Dump above occurs.
ST22 Long Text:
Error in the ABAP Application Program
The current ABAP program "SAPLSVIM" had to be terminated because it has come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPL080O " in include"L080OF00" inline 345:
"The data object "V_TVAK" does not have a component called "ABRVW"."
Anybody have the same issue ?

Hi
We've had exactly the same error with the View "V_TVAK" and the field "RDP_PROFILE".
An activation of V_TVAK solved our problem (before that we've found some inconsistencies in the object "V_TVAK").
Best Regards
Kevin

Short dump Error during VM container communication between ABAP and JAVA.

Hello All,
Can anybody please help with resolving the following issue:
Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
When I try to insert ECC migrated material, everything works fine.
Here is the details of dump:
Short text
    Error during VM container communication between ABAP and JAVA
Information on where terminated
    Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
    The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
Thank you!

hi Willie,
     this is the dump, and i have used the t-code sm52 . the VMC is not active.
|Short Text                                                                                        |
|    Error during VM Container communication between ABAP and JAVA.                                |
|What happened?                                                                                    |
|    The current program had to be terminated because of an                                        |
|    error when installing the R/3 System.                                                         |
|    Error in the RFC layer.                                                                       |
|What can you do?                                                                                  |
|    Note which actions and entries caused the error to occur.                                     |
|                                                                                                  |
|    Consult your SAP administrator.                                                               |
|                                                                                                  |
|    Using transaction ST22 for ABAP dump analysis, you can view, manage,                          |
|    and retain termination messages for longer periods.                                           |
|Error analysis                                                                                    |
|    An error has occurred in the RFC layer during communication between                           |
|    JAVA and the ABAP stack. This prevents data from being passed correctly                       |
|    between the two stacks.                                                                       |
|                                                                                                  |
|    Message    = TH_VMC_SERV_NOT_ACTIVE                                                           |
|    Return code = -1007                                                                           |
|    Pointer    = "000007DD348F6138"                                                               |
|How to correct the error                                                                          |
|    Check whether the VMC is active on your application server. To do this,                       |
|    run transaction SM52. If the VMC is not active, contact your SAP                              |
|    administrator.                                                                                |
Regards
Charles

SAP Short Dumps and PCI Compliance

We've run into an issue with our PCI Compliance audit around being able to see unencrypted credit cards in short dump messages in SAP. Has anyone run into this issue?
Only work around I've got at this point is to restrict all access to short dumps and require many documented signoffs before turning on and off access to a short dump. This is pretty cumbersome, and still leaves a hole in my overall security.
We've managed to purge restricted CC data from our XI logging, and done everything right with encryption, but this short dump issue just doesn't seem to have a solution.
Can anyone help? We're on 6.0.
Thanks!

Hi David,
This is an interesting situation you have described. ABAP short-dumps or run-time errors as they are also known as, are unhandled exceptions during program execution. The conditions that cause such exceptions is unknown or cannot be handled at run-time. To help analyze what went wrong with the said program during execution, it is necessary for the dump to contain all possible information including data values passed between programs when the error occurs. Encryption of restricted data values is a program step in itself. If the dump were to occur after this step then of course it would contain encrypted CC info. Unfortunately in your case it exposes restricted CC info because the dump occurs BEFORE this step.
I don't believe there is a way to prevent this from happening -- for the same reason that the program logic does not know at run-time how to "handle" the exception. If occurrences of such dumps is fairly common in your system, you may want to investigate the likely causes -- for example, missing or incorrect customization. Analyzing the short dumps will probably give you a clue. Your customization team may be able to identify a pre-condition that causes this unhandled exception. If this exception can then be handled (via a program change) that returns a meaningful error instead of a short dump you would be able to close the security hole. This however entails modification to SAP standard code. I don't usually recommend such changes, but given the sensitive nature of your data it may be worth consideration.
I personally advocate restricted access to ST22. The steps you have undertaken to enforce this may be cumbersome despite efforts to keep it simple. I suppose that's the price we pay in administering the system. If you have not already done so, you may also want to ensure that short-dumps that contain restricted CC info are not saved (using the "Keep" feature in ST22) for easy retrieval at a later point in time or they are saved, it be available only to 'restricted eyes'. Short-dumps are normally saved in the system for 7 or 14 days (not sure of exact # of days). The bigger challenge in my opinion is: How do you prevent the restricted info from being viewed by the user who during the course of program/transaction execution encounters the said short dump? No amount of security controls around ST22 will mitigate this risk. The only option that remains is program change (as mentioned above). But to get there you first need to know what causes the exception.
Regards.
Ashutosh

Short dump CONNE_IMPORT_CONVERSION_ERROR in PC00_M14_CALC and PC00_M28_CALC

Similar Messages

Maybe you are looking for