Short Dump for upgrade from 3.5 to 7.0

Hi All,
We have upgraded the BI system from 3.5 to 7.0 .
In the upgraded system , when i run the program RRINCLTAB_REBUILD , it throws the short dump as SAPSQL_WHERE_FOR_ALL_MISMATCH.
In the dump it says to check the field length and field type of LINKNO for the standard table and the internal table used in program.
Standard table - /BIC/KILIACG
Internal table - l_t_nodesid type standard table of RSDMHSITAB
I checked it , but unable to find any in-consistency there in two field definations.
Pls suggest the ways to resolve it.
Regards,
Sarang Kahu

Hi,
the error is not related to a standard table.
/BIC/KILIACG is the sid table of the hierarchy of infoobject ILIACG. I would recommend to check that infoobject in the target system and try to activate if it isn't active already. Otherwise, goto se14. for the that table and check the ddic object as well as the runtime object. Try to repair the table with se14. Then run the program again.
regards
Siggi

Similar Messages

Short Dump for Dynamic Select Query

Hello all,
I get a short dump for my dynamic select query at the end of the code. The error is "The types of operands "dbtab" and "itab" cannot be converted into one another."
My code looks like below.
FORM get_ccnum_2 USING    p_tabname TYPE dd03l-tabname.
DATA: p_table(30) TYPE c.
FIELD-SYMBOLS: <dyn_wa>,
                               <t> TYPE table.
DATA: it_fldcat    TYPE lvc_t_fcat.
TYPE-POOLS : abap.
DATA: it_details   TYPE abap_compdescr_tab,
        wa_details   TYPE abap_compdescr.
DATA: ref_descr    TYPE REF TO cl_abap_structdescr.
DATA: new_table    TYPE REF TO data,
        new_line     TYPE REF TO data,
        wa_it_fldcat TYPE lvc_s_fcat.
p_table = p_tabname.
ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
it_details[] = ref_descr->components[].
LOOP AT it_details INTO wa_details.
    CLEAR wa_it_fldcat.
    wa_it_fldcat-fieldname = wa_details-name .
    wa_it_fldcat-datatype = wa_details-type_kind.
    wa_it_fldcat-intlen    = wa_details-length.
    wa_it_fldcat-decimals = wa_details-decimals.
    APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
CALL METHOD cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = it_fldcat
    IMPORTING
      ep_table        = new_table.
ASSIGN new_table->* TO <t>.
CREATE DATA new_line LIKE LINE OF <t>.
ASSIGN new_line->* TO <dyn_wa>.
wa_cond = 'CCNUM <> '' '' '.
APPEND wa_cond TO tab_cond.
      SELECT * INTO TABLE <t>
               FROM     (p_table)
               WHERE    (tab_cond)
               ORDER BY (tab_ord).
ENDFORM.                    " GET_CCNUM_2

Hi,
I tried to execute the code using table BSEGC and it gave a short dump..
the actual exception that shows in ST22 IS ..UNICODE_TYPES_NOT_CONVERTIBLE..
I think there is something wrong in the internal table creation..
Instead of using the method cl_alv_table_create=>create_dynamic_table to create the dynamic table I used the following and it worked..
CREATE DATA new_table TYPE TABLE OF (p_table).
* Comment begin " Naren
* ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
* it_details[] = ref_descr->components[].
* LOOP AT it_details INTO wa_details.
*    CLEAR wa_it_fldcat.
*    wa_it_fldcat-fieldname = wa_details-name .
*    wa_it_fldcat-datatype = wa_details-type_kind.
*    wa_it_fldcat-intlen    = wa_details-length.
*    wa_it_fldcat-decimals = wa_details-decimals.
*    APPEND wa_it_fldcat TO it_fldcat .
* ENDLOOP.
* CALL METHOD cl_alv_table_create=>create_dynamic_table
*    EXPORTING
*      it_fieldcatalog = it_fldcat
*    IMPORTING
*      ep_table        = new_table.
* Comment End. " Naren
CREATE DATA new_table TYPE TABLE OF (p_table).   " New code by naren
Please Try this..
Thanks
Naren

OSS notes relevant for FI/CO for upgrade from 4.7 to ECC 6.0

Hello,
I need the list of the applicable OSS notes relevant for the FI/CO module for upgrade from 4.7 to ECC 6.0
Thanks
Sid

Hi,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Please assign points if it useful.
Regards
Ravinagh Boni

Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money for that

Hi All
Does for upgrade from ecc 5.0 to ecc 6.0 we have to pay money to SAP for that.

hi,
asking or teling ?
I think you need not as long as you are with official support . However please contact sap official support in you region

Requirements for upgradation from 4.7 to ECC 6.0

Hi Guru's,
Can anybody explain what are the steps required for upgradation from 4.7 to ECC 6.0, technically and functionally. If any body have documents regarding the same, please share.Full marks will be awarded.thanx in advance....

Hi
You have to aware of all related program like BDC's , Screens related errors and all dictionary related problems.
Some function modules may become obsolete, and some screens will change
abnd some new fields will be added in the new versions etc.
Also take care of SPAU and SPDD tcodes.
You should be able to know about Unicode concept in sap.
chk this
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
also chk these 2 notes in service.sap.com
Technical Upgrade is only a version upgrade without any functionality changes.
The objects that are needed to be upgraded are:
Includes
Function Groups / Function Modules
Programs / Reports
OSS Notes
SAP Repository Objects
SAP Data Dictionary Objects
Domains, Data Elements
Tables, Structures and Views
Module Pools, Sub Routine pools
BDC Programs
Print Programs
SAP Scripts, Screens
User Exits
You can refer to the below links for more information on technical upgrade:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66647d9011d396b60000e82de14a/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
Reward points if useful
Regards
Anji

Features and Functionalities of ECC 6.0 for upgrade from 4.7 to ECC 6.0

Hi All,
Can you let me know the features and functionalities of ECC 6.0 as we are planning to go for upgrade from 4.7 to ECC 6.0...
Cheers
Prasanna

And you can see the PAM for your architecture.....
Do you want to use the JAVA instance?
Change from no-unicode to unicode?
Do you have MDMP?
Regards,
Alfredo.

What is the sequence for upgrading from 10.4.11 to lion

What is the sequence for upgrading from 10.4.11 to lion. Can't use many apps without it. HELP

Quicken is an example that the OP noted is important to her, too!
Intuit makes it very difficult to find this link?!
Everytime I want to find it to post it for someone else, I have to Google: "cnet quicken 2007 for lion" and then in top listed link: Topper Kessler's review for CNET, I find the direct link to Intuit
This program will work with Quicken 2005, 2006 and 2007 data files directly. If you have a data file from an older version, such as I did, Quicken Deluxe 2002, you must use the PPC version of either Quicken 2006 or 2007 to update the data first; and then the data will work in Quicken 2007 for Lion.
For other PPC programs that require Rosetta, I installed Snow Leopard (with Rosetta) into Parallels 7 in Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

Will I be charged for upgrade from OSX 10.7.4 version to 10.7.6 version?

Will I be charged for upgrade from OSX 10.7.4 version to 10.7.6 version?
When I check for the software upgrade on my Mac-book Air, it is showing that the above upgrade is available. Will it be charged? I am not asked the ‘ Apple ID’ before start of up gradation process , does that mean that such upgrades are free?
If yes, How much are the chargers for such upgrades?
Thanks for your inputs.

10.7.6 does not exist.
The next one will be Mountain Lion 10.8 and will cost a little amount.
The Mountain Lion is not an "update", but an "upgrade": a different OS: before installing you should check the compatibilty of your hardware and software.

Error in phase XPRAS_AIMMRG for Upgrade from 4.7 to ERP6 ehp5 sps5

Hi All,
We are in process in upgrading our sandbox system from 4.7 to ERP6.0
EHP5 SPS5.
During the downtime step we are facing an error in phase XPRAS_AIMMRG
Upon investigation we found that there are short dumps in the system
due to this error.
Below is the extract of the short dumps generated by the job RDDEXECL
Category Internal Kernel Error
Runtime Errors DDIC_TYPE_INCONSISTENCY
Application Component BC-ABA-LA
Date and Time 05.12.2011 08:58:48
Short text
Inconsistency in the dictionary for the structure "KOMG".
What happened?
Error in the SAP kernel.
The current ABAP "SAPLF82V" program had to be terminated because
the
ABAP processor detected an internal system error.
Also, We I try to check the Table KOMG in SE11 is get the below messages.
Check table KOMG (DDIC/05.12.11/10:00)
Append structure OILKOMG appended to table KOMG
Append structure OIUKOMG appended to table KOMG
No customer or SAP include SI_KOMK_CM exists
No customer or SAP include SI_KOMP_CM exists
No customer or SAP include CI_PRS_CPILS_2 exists
Enhancement category 3 possible, but include or subty. not
yet classified
Field LGORT in table KOMG is specified twice. Please check
KOMG-ZZMVGR4: Table TVM1T in search help attachment differs
from table of search field
Check on table KOMG resulted in errors
Has anyone received the below message in XPRAS phase during the upggrade.
Any suggestion would be most welcome.
Regards,
Nilesh Jagtap

Dear Nilesh,
The reason for this issue is that the component 'LGORT' is indeed specified twice in structure KOMG on your system.
It might be definied in the standard include as well as in your customer include.
Please bear in mind, that if you append customer own structures to SAP standad structures, that the component names should start with 'Z' or even better 'ZZ'.
That prevents the case which might have happened here, that the field you have added on customer side has also been delivered as part of an SAP standard include.
So you should change your structure accordingly.
Note 531835 describes how to add an own field to such structures. It might also be helpful for you.
After you have repaired your structure you can activate the structure KOMG and the issue should be solved.
Best Regards,
Abhishek

BCS Short Dumps after Upgrade (3.5 to BI7)

Hi SDN,
We have recently upgraded our dev system from BW3.5 to BW 7 (SEM BW 6) and following the upgrade none of the queries based on the BCS virtual info provider(Remote Cube) ZVBCS01 are working or the listcube transaction on cube ZVBCS01 in RSA1.
Both the queries and listcube short dump with DATREF_NOT_ASSIGNED (Details "DATREF_NOT_ASSIGNED" "SAPLUCR0" "LUCR0U08" "PROVIDE_SEM_DATA_TABLE_3")
We have raised a call with SAP OSS they recommended to activate the InfoObject 0BCS_REPMOD from business content and regenerate the data basis. We did all this but still experience the short dumps. (We havenu2019t assigned 0BCS_REPMOD to any Infoproviders or the data basis)
We will be unable to upgrade to BI7 unless we can resolve this issue so any help would be appreciated.
Kind regards,
Jamie Flaxman

Thanks for the responses, we have managed to get BCS working now following the upgrade.
Following the activation of the business content, I had to regen the Data Basis but the way I did it originally wasnu2019t enough to force a regeneration. So I had to make a small change to the data basis (move of field names and back again) which was enough to do the re-gen.
We have experienced quite a few issues with the upgrade from SEM 4 to 6.
Thanks for the help.
Jamie Flaxman

How to keep short dumps for a longer time

Hi All,
I need to write a program to fetch all the below mentioned fields from the system dump tables and insert into a user defind table. Please help me with the code. Thanks in advance....
PROBLEM DESCRIPTION
ABAP runtime errors (also known as short-dumps) are kept in the system only for two days, mainly because every short-dump can use a lot of disk space depending on short-dump type. Problem is that this reduced time frame (two days) is not allowing us to focus in solve the more frequent ones and we do not have any statistic about:
    how many are we getting
    how often
    repetitive ones
PROPOSED SOLUTION
We need a program to be executed in a daily job right after midnight which will take the basic information of all todays short-dumps and store it in a custom table.
Information to be kept:
      DATE
      TIME
      HOST
      USER
      SYSTEM
      CLIENT
      ERROR ID
      TRANSACTION
      PROGRAM NAME
      PROGRAM NAME VERSION (TRANSPORT REQUEST NUMBER)
      PROGRAM NAME VERSION TIMESTAMP (transported to PPx)
      SCREEN
      SCREEN LINE
      MAIN PROGRAM NAME
      MAIN PROGRAM NAME VERSION (TRANSPORT REQUEST NUMBER)
      MAIN PROGRAM NAME VERSION TIMESTAMP (transported to PPx)
      PROGRAM LINE NUMBER AT TERMINATION
      SAP RELEASE
      SAP KERNEL
      PATCH LEVEL
      DATABASE VERSION
The program must have archiving capabilities implemented. In the month end run it will also perform the table house-keeping accordingly with a parameter like this:
     ERROR-ID
     MONTHS TO KEEP
We need to have the possibility of defining different retention periods for different kind of errors, for example our friend GETWA_TOO_MANY_SEGMENT could be stored for a year and a simple CONVT_NO_NUMBER only for a month. One of the parameters should be the default one, something like
        ERROR-ID **************
        MONTHS TO KEEP 01.

Aruna,
Following may be the action points for your requirements.
1. Create Custom table with all fields you required.
2. Create ABAP program to extract the data from SAP standard table where runtime error information is stored.
Like: select * from snap_beg into wa_snap_beg
          where seqno = '000'
          and   datum in s_datum
          and   uzeit in s_uzeit
          and   ahost in s_ahost
          and   uname in s_uname
          and   mandt in s_mandt.......
So SNAP_BEG is a table where you can find dump information.
After extracting the data from this table insert it into a Custom table which you have created in Step 1.
Use INSERT statement for this.
3. Create transaction for this report.
4. Schedule this program every day so that you will get all data into custom table.
I hope this will help you.
Regards,
Amey

TIME_OUT Short Dump for SAPLDSVAS_PROC report - BPM activation

Hello SOLMAN Experts,
I'm trying to activate BPM Business Process Monitoring and getting the following short dump:
Runtime Errors         TIME_OUT
Short text
     Time limit exceeded.
What happened?
     The program "SAPLDSVAS_PROC" has exceeded the maximum permitted runtime without
    interruption and has therefore been terminated.
Any advice please?
Thanks,
123

Hello,
For the time being (Temporarily), you can try to increase the parameter rdisp/max_wprun_time to some higher value and then try activation process. This parameter is I think 'dynamic' and so can be updated without system restart. You can verify this from rz11.
After you done, revert the value.
Thanks

SAP GUI for HTML - Short dump for Office intehration

Hi Experts.
I am using portal to view the transaction and it needs to open a document, while opening a document through it getting an error. when using
SAPGUI for HTML.
But it is working fine for GUI for Windows. ( selected this option in iView). It also works fine when use the transaction SAP itself.
Getting an below error from portal.
A RAISE statement in program "C_OI_CONTAINER_CONTROL_CREATORCP" has rais
exception condition "JAVABEANNOTSUPPORTED".
Since the exception was not caught by a program higher up in the call
hierarchy, processing was terminated.
Thanks
Rag

Anurag,
I have gone through notes.
I am using 7.2 version and access transaction through portal. while opening MS-office document, it is giving an error like JAVABEANNOTSUPPORT. and OFFICEINTREGRATION issue.
While opening it in SAP its working fine as well as using GUY for Windows also good.
But giving a short dump while accessing through portal with GUI for HTML option.
Any idea or work around for the same.
Thanks
Rag

Options for Upgrade from OSX 10.4 to Leopard

Hi all, I started this question over here:
http://discussions.info.apple.com/thread.jspa?threadID=2592383&tstart=0
and BDAqua recommended I start a new thread, so here goes:
My computer has been crazy slow for the last year or two. I have a MacBook with Mac OS X (10.4.11). We've think we want to reinstall the OS, I don't have the original install disks.
BAqua recommended paying the $29 for the Leopard upgrade, but I noticed here http://www.apple.com/macosx/specs.html that it says I need to get the full product since I'm on OSX 10.4 - is that true?. Here's what it says on the bottom right:
Upgrading from Mac OS X v10.4 Tiger.
If your Intel-based Mac is running Mac OS X v10.4 Tiger, purchase the Mac Box Set, which is a single, affordable package that includes Mac OS X v10.6.3 Snow Leopard; iLife, with the latest versions of iPhoto, iMovie, GarageBand, iWeb, and iDVD; and iWork, Apple’s productivity suite for home and office including Pages, Numbers, and Keynote.
I'm not sure it's worth $169 to upgrade the OS - especially considering we don't even know if it's a hardware problem.
Also, can I do a complete reinstall with the upgrade disk anyways? My husband has worked on PCs for a long time, but wasn't sure what to do about a Mac that has what appears to be a lot of corrupted settings. He tried to create a new user and copy the setting over (seems like common advice on these forums), but my computer hangs forever when trying to create a new user. He figures it's faster to just reinstall than try and fix it one problem at a time. Thoughts?
Thanks so much!

There have been reports from users who have bought the $29. package
and used it to install a newer Snow Leopard 10.6.x system in a supported
Mac computer model that was capable of using that version.
Snow Leopard 10.6 is the current production version; Leopard 10.5 is not.
With enough free space (capacity, unused) on the computer's hard disk
drive, a new system could be installed; an Upgrade & Install, if you had
a newer retail install DVD. But too full of a hard disk drive, and it won't
work; neither would an Archive & Install, where you choose to have the
new system save and use the old user account & setup info. If the Mac
has too much stuff on the hard disk drive, it has to be dealt with first.
And the computer system itself is separate from the user acct issues.
The 10.6 upgrade is a full installer, according to those who have used it;
but the better deal would be to get the large 'complete package deal' due
to the addition of the other software, each in a retail package version, to
add those other apps that the upgrade installer by itself won't include.
And the older Tiger-level versions are fairly outdated to try and use in the
Mac once you've upgraded the OS from 10.4.11 to Snow Leopard 10.6.x.
Usual issues as you describe that are affecting your computer use, tend
to be related to a few factors; issues contributing to slowness and sluggish
performance, include: a too-full hard disk drive, in adequate RAM installed
to run certain Apps. And a combination of a fuller than desired hard disk
drive plus inadequate available RAM installed, can make a system slow.
RAM is on-chip random access memory; HDD capacity is storage space.
Not to confuse these; however the computer will use larger sections of free
hard disk drive space. Unused capacity, used as Virtual Memory helps the
Mac OS X system and Apps you may be using, handle the workload and
temp files, swap space, Virtual Memory and other workings, are comprom-
ised by a lack of sufficient free or unused hard disk drive capacity.
Also, in addition to the above, certain cache files in the system, and other
items addressed by routine and preventative maintenance, can grow to a
point where they can slow the system. So, trying to install an upgrade over
a problem not directly related to the system, only will layer the first problem.
The symptoms you describe indicate the problem is probably due to the
hard drive being near full capacity; or perhaps it has bad sectors and a
part of the hard disk drive is not longer accessible to the Mac OS X, so the
computer is working around the lack of space needed as Virtual Memory;
and has gotten way slow in trying to find temporary work space, under load.
IF the internal drive in the computer is more than 75 to 85% full, it likely is
overdue for some clearing out; image files, music files, libraries of these
can use up plenty of hard disk drive storage capacity. So much, the Mac
may start to work very hard, and then the usual thing is hard drive failure.
So, you should consider using an external drive enclosure that can boot
the computer model you have (some can't.) If your Mac has USB 2.0
ports, and FireWire400/800, then an external enclosure sporting both
kinds of ports (FW + USB2.0) with its own power supply; and making a
complete computer drive clone, on the external drive.
Once a suitable and boot-capable copy/clone is created on an external
hard disk drive, and it is tested to see it can start and run the Mac, you
could choose to use Disk Utility from the clone's utility folder, and have
it 'repair disk permissions' on the booted clone. Then, it may be OK to
secure erase (one-pass) the hard disk drive, using Disk Utility's optional
tools, and choose a partition map (GUID-type) and reformat to HFS+.
Then, the system which was cloned to the external drive could be re-
cloned back to the internal hard disk drive. The same Clone utility can
be used to move or copy an OS X system back & forth. One that I use
is a free-running donationware/download, named Carbon Copy Cloner.
Since the computer have/had shipped with a special version of Tiger
10.4, (Intel-based Macs with Tiger) this would not be able to use a
retail copy of the Tiger DVD to do a re-install. You could call Apple
Sales/Support, and tell them the Serial Number of your Mac, and ask
about getting a replacement original software packet for your computer.
This would cost a nominal fee; or go for the $29. Snow Leopard one.
The product specialist you'd talk to about this, at 1-800-MY-APPLE
may be able to direct you somewhat, if the original Tiger 10.4 replace-
ment disc set is no longer available for your computer.
A concern, would be if you were somehow able to install an upgrade to
a later system into your computer, as it is now (with issues) the problem
could be worse, since a too-full hard disk drive can be damaged or be
a cause of software/data loss once you over-fill the drive.
Also, a portable computer, among others that see a lot of use, may need
a new/replacement hard disk drive by now; after three to five years run-
time. They do wear out, and the more they have to work to do read/write
cycles of use, such as when inadequate chip RAM is installed, to swap
files and use HDD free space as Virtual Memory, things wear out faster.
So, the system itself isn't likely the cause of the problem; but is a symptom.
And you need to have some system discs. The replacement of original discs
would give you the correct Apple Hardware Test it shipped with; this is not
on any other version OS X install disc. And the original disc set should be
included with a computer when it is sold, traded, or gifted away. Plus, any
other OS X version it may have been upgraded with. To cover all bases.
Perhaps someone else has a shorter version of this line of thinking, with a
few good web links to helpful sites? I have fielded three local interruptions
not related to computers while trying to write what I thought was a simple
reply to a question; but find it is easier to know the answer than get it out.
Some general ideas:
• OS X Maintenance and Troubleshooting:
http://www.macattorney.com/ts.html
• Maintaining Mac OS X:
http://www.thexlab.com/faqs/maintainingmacosx.html
• Download Titanium Software's OnyX (note system version)
http://www.titanium.free.fr/download.php
There always are more questions, hopefully someone will help
match answers up correctly, and pair them off successfully.
Good luck & happy computing!

MS System Center Operations Manager 2010 Download required for Upgrade from SCOM 2007 R2 (Select)

We need the download of SCOM 2012 without Service Pack1.
Upgrade from SCOM 2007 R2 (select license) fails while upgrade check with error: Logs shows "At least one of the following applications is installed on this computer. Due
to incompatibility with System Center 2012 - Operations Manager, these applications must be uninstalled."
Upgrade was started from dos elevated prompt with modified parameters like this:
setup.exe /silent /upgrade
/AcceptEndUserLicenseAgreement:1
/UseLocalSystemDASAccount
/DataReaderUser:<domain\user>
/DataReaderPassword:<password>
Research in internet and we found another person with same issue, which reports that direct upgrade from SCOM 2007 R2 to SCOM 2012 SP1 is not possible but if upgrade is done over
SCOM 2012 to SCOM 2012 SP1 it succeeds.
Unfortunately, we don't find any downloads for the first release of System Center 2012 e.g. Operations Manager.
Everything shows Service Pack 1 or the newer R2.
Who can help?

Our “Recommended” rolling upgrade path looks like the following:
SCOM 2007R2 CU4+ > SCOM 2012 RTM UR2+ >
SCOM 2012 SP1 UR4+ > SCOM 2012 R2
Also you can refer below link
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Short Dump for upgrade from 3.5 to 7.0

Similar Messages

Maybe you are looking for