Short dump issue while loading data
Hello All,
We are trying to load the data to the cube , but every time it is throwing us a short dump with the below error.
We have found a SAP Note as well for the below error , Please suggest, how to implement the same.
Error:
Runtime Errors CONVT_NO_NUMBER
METHOD end_routine.
=== Segments ===
FIELD-SYMBOLS:
<RESULT_FIELDS> TYPE _ty_s_TG_1.
DATA:
MONITOR_REC TYPE rstmonitor.
... "insert your code here
-- fill table "MONITOR" with values of structure "MONITOR_REC"
- to make monitor entries
... "to cancel the update process
raise exception type CX_RSROUT_ABORT.
*Fiscal year quarter addition
loop at RESULT_PACKAGE assigning <RESULT_FIELDS>.
if <RESULT_FIELDS>-/bic/zsp_Mon BETWEEN 1 and 3.
CONCATENATE 'FY' <RESULT_FIELDS>-fiscper+2(2) 'Q3' INTO
<RESULT_FIELDS>-/bic/zsp_FYQA.
elseif <RESULT_FIELDS>-/bic/zsp_Mon BETWEEN 4 and 6.
CONCATENATE 'FY' <RESULT_FIELDS>-fiscper+2(2) 'Q4' INTO
<RESULT_FIELDS>-/bic/zsp_FYQA.
elseif <RESULT_FIELDS>-/bic/zsp_Mon BETWEEN 7 and 9.
CONCATENATE 'FY' <RESULT_FIELDS>-fiscper+2(2) 'Q1' INTO
<RESULT_FIELDS>-/bic/zsp_FYQA.
elseif <RESULT_FIELDS>-/bic/zsp_Mon BETWEEN 10 and 12.
CONCATENATE 'FY' <RESULT_FIELDS>-fiscper+2(2) 'Q2' INTO
<RESULT_FIELDS>-/bic/zsp_FYQA.
endif.
endloop.
ENDDMETHOD. "end_routine
THOD inverse_end_routine.
IMPORTING
Hi,
As suggested by note, you need to put this code in end routine.
Check the syntax , if error go through it and fix syntax (take help of ABAPer if required) and
activate Transformation and DTP.
Thank-You.
Regards,
VB
Similar Messages
-
Short Dump error while loading data from R/3 to ODS
Hello,
while trying to load data into the ODS from R/3 I get the following short dump error message. How do I carry out step 1 in the below procedure. Where do i find the Activate Function. And idea?
Thanks,
SD
Diagnosis
Form routine CONVERT_ITAB_RFC is incorrect in transfer program
GP4C0LOLZ6OQ70V8JR365GWNW3K .
System Response
The IDoc processing was terminated and indicated as incorrect. The IDoc
can be reimported at any time.
Procedure
1. Go to the transfer rule maintenance for your InfoSource
ZFIN_TR_FLQITEM_FI and the source system DA_M_10 and regenerate the
transfer program using the function Activate. Remove possible syntax
errors on the basis of your conversion routines.
2. Restart the processing of this IDoc.
3. If the error occurs again search for SAPNet R/3 notes, and create a
problem message if necessary.
Edited by: Sebastian D'Souza on Jan 13, 2009 3:22 PMHi.......
Goto RSA1>> then to source system tab (on left side) >> double click on the desired source system...........Then on the right side you have the Datasource tree..........there search the datasource and activate.......Also u can Replicate the datasource again.......and activate the Transfer rules using the program : RS_TRANSTRU_ACTIVATE_ALL
After this operation when come back to source system (R/3).........I think the error log line will be disappeared from SM58......... Then repeat the load.........
Also u can try to Activate the infosource once...........in RSA1.........before repeating the load....
Hope this helps......
Regards,
Debjani.... -
Short dump:ASSIGN_TYPE_CONFLICT- While loading data through DTP
Dear all:
We currently work with BI NW2004s SP10. We created transformation for mapping InfoSource and InfoCube based on 3.x transfer rule. For example, we used cube 0PUR_C04 and Data Source 2LIS_02_ITM_CP. And the transformation is "TRCS Z2LIS_02_ITM_CP -> CUBE 0PUR_C04". Everytime when we tried to load data via DTP. A runtime short dump occurred: ASSIGN_TYPE_CONFLICT
Error analysis:
You attempted to assign a field to a typed fie but the field does not have the required type.
we went back and forth to activated transformation and DTP. But still, same error occurred.
Any idea, please !!!!
BR
SzuFenHi Pavel:
Please refer to the following information-
User and Transaction
Client.............. 888
User................ "TW_S
Language key........ "E"
Transaction......... " "
Program............. "GPD0
Screen.............. "SAPM
Screen line......... 6
===========================================================
Information on where terminated
Termination occurred in the ABAP program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" - in
"EXECUTE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 704
of the (Include) program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
The program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" was started as a background job.
Job Name....... "BIDTPR_284_1"
Job Initiator.. "TW_SZU"
Job Number..... 16454800
===========================================================
Short text
Type conflict with ASSIGN in program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
===========================================================
Error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
===========================================================
Information on where terminated
Termination occurred in the ABAP program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" - in
"EXECUTE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 704
of the (Include) program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL".
The program "GPD0QBVJ2WFQZZXBD0IJ1DSZAEL" was started as a background job.
Job Name....... "BIDTPR_284_1"
Job Initiator.. "TW_SZU"
Job Number..... 16454800
===========================================================
Line SourceCde
674 ELSE.
675 ASSIGN rdsTG_1->* to <_ys_TG_1>.
676 CLEAR <_ys_TG_1>.
677 MOVE-CORRESPONDING G1 TO <_ys_TG_1>.
678 <_ys_TG_1>-requid = l_requid.
679 l_recno_TG_1 = l_recno_TG_1 + 1.
680 ls_cross-insegid = 1.
681 ls_cross-inrecord = l_recno_SC_1.
682 ls_cross-outsegid = 1.
683 ls_cross-outrecord = l_recno_TG_1.
684
685 CALL METHOD i_r_log->add_cross_tab
686 EXPORTING
687 I_S_CROSSTAB = ls_cross.
688
689 ** Record# in target = sy-tabix - if sorting of table won't be changed
690 <_ys_TG_1>-record = l_recno_TG_1.
691 INSERT <_ys_TG_1> INTO TABLE <_yth_TG_1>.
692 IF sy-subrc <> 0.
693 CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack.
694 ENDIF.
695
696 ENDIF. "Read table
697 *
698 ENDIF.
699 CLEAR skipseg_all.
700 ENDLOOP.
701 * -
insert table into outbound segment -
702
703 <_yt_TG_1>[] = <_yth_TG_1>[].
>>>>>
705 rTG_1->insert_table( rdtTG_1_dp ).
706 ENDMETHOD. "execute
707
708
709
710 endclass. "lcl_transform IMPLEMENTATION
711
712 &----
713 *& Form get_runtime_ref
714 &----
715 * text
716 ----
717 * -->C_R_EXE text
718 ----
719 form get_runtime_ref
720 changing c_r_exe type ref to object.
721
722 data: l_r_exe type ref to lcl_transform.
723 create object l_r_exe.
===========================================================
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 3
SY-TABIX 0
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Batch Process
SY-MSGTY E
SY-MSGID R7
SY-MSGNO 057
SY-MSGV1 0TOTDELTIME
SY-MSGV2 A
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20070420
SY-UZEIT 164557
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXIT
===========================================================
Active Calls/Events
No. Ty. Program Include
Name
6 METHOD GPD0QBVJ2WFQZZXBD0IJ1DSZAEL GPD0QBVJ2WFQZZXBD0IJ1DSZAEL
LCL_TRANSFORM=>EXECUTE
5 METHOD CL_RSTRAN_TRFN_CMD============CP CL_RSTRAN_TRFN_CMD============CM005
CL_RSTRAN_TRFN_CMD=>IF_RSBK_CMD_T~TRANSFORM
4 METHOD CL_RSBK_PROCESS===============CP CL_RSBK_PROCESS===============CM00Q
CL_RSBK_PROCESS=>PROCESS_REQUEST
3 METHOD CL_RSBK_PROCESS===============CP CL_RSBK_PROCESS===============CM002
CL_RSBK_PROCESS=>IF_RSBATCH_EXECUTE~EXECUTE
2 FUNCTION SAPLRSBATCH LRSBATCHU13
RSBATCH_EXECUTE_PROCESS
1 EVENT RSBATCH_EXECUTE_PROZESS RSBATCH_EXECUTE_PROZESS
START-OF-SELECTION
===========================================================
Thank you and BR
SF -
Special character issue while loading data from SAP HR through VDS
Hello,
We have a special character issue, while loading data from SAP HR to IdM, using a VDS and following the standard documentation: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e09fa547-f7c9-2b10-3d9e-da93fd15dca1?quicklink=index&overridelayout=true
French accent like (é,à,è,ù), are correctly loaded but Turkish special ones (like : Ş, İ, ł ) are transformed into u201C#u201D in Idm.
The question is : does someone know any special setting to do in the VDS or in IdM for special characters to solve this issue??
Our SAP HR version is ECC6.0 (ABA/BASIS7.0 SP21, SAP_HR6.0 SP54) and we are using a VDS 7.1 SP5 and SAP NW IdM 7.1 SP5 Patch1 on oracle 10.2.
ThanksWe are importing directly to the HR staging area, using the transactions/programs "HRLDAP_MAP", "LDAP" and "/RPLDAP_EXTRACT", then we have a job which extract data from the staging area to a CSV file.
So before the import, the character appears correctly in SAP HR, but by the time it comes through the VDS to the IDM's temporary table, it becomes "#".
Yes, our data is coming from a Unicode system.
So, could it be a java parameter to change / add in the VDS??
Regards. -
Issue while loading data to sample essbase app using odi
while executing data load the error is
Now, while loading data to an essbase app i am getting the following error:
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 23, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx4.f$0(<string>:23)
at org.python.pycode._pyx4.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.sendRecordArrayToEsbase(Unknown Source)
... 32 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)Hi,
It means in your options of the KM you have it set to quit when it hits one error, if you set it to 0 (infinite) then it will not stop no matter how many data load errors it hits.
If you set it to 0 and run the interface, depending on how you set up the options in the KM it can write to two log files, which you should check.
Cheers
John
http://john-goodwin.blogspot.com/ -
Short Dump Error while loading master data.
Hello All,
I am trying to load data from PSA to Info Object (0Material_Attr) via DTP, I am getting error and itu2019s giving the short dump.
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE.
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE".
In Job overview, job is getting cancelled, with error message
"The object name is not allowed to be empty".
ABAP/4 processor: UNCAUGHT_EXCEPTION.
We have done the following steps, even then error persist.
Transaction RSRV > All Elementary Tests > Master Data > Compare Number Range and Maximum SID for the characteristic 0REQUID.
If the system reports an error here, correct the error using the "Correct Error" function.
Kindly suggest.
Thanks in Advance .Error analysis from ST22
An exception occurred which is explained in The exception, which is assigned to class ' and therefore caused a runtime error.
The reason for the exception is: No text available for this exception
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE" -
Short dump error while loading through infopackage
Hi Experts
When iam executing the infopackage it is taking (showing the Yellow staus)very long time
where as the no of records is lesss than 3000....
I made a check in ST22 it shows a short dump which is stating "RAISE_EXCEPTION" error
and still the process is in Yellow status in RSMO T.Code
Any help on this
Thanks Muchcheck the status of the background job , if job has faild
the reasion may be because of chaing in the extract structure in the source system.
so we can replicate the data source to resolve this issue.
And also make a check with extract structure using the T.coad RSA3, to find
no of records and to find out any chainges in the structure .
prasad. -
Short dump error in Loading data into ODS
Hi All,
I am facing problem in loading data from R/3 to BW into an ODS. The system is going into short dump.The error message occuring in BW side is
Trigger Location of Runtime Error
Program SAPLRSS1
Include LRSS1F11
Row 1.358
Module type (FORM)
Module_Name :RSM1_CHECK_FOR_DELTAUPD
So can any body help me regarding this.
Thanks in advance
AnuragHi Anurag,
please check out this link: https://websmp107.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=405943&_NLANG=EN
regards
Siggi -
Issue while loading data from DSO to Cube
Gurus,
I'm facing a typical problem while loading Cube from a DSO. The load is based upon certain conditions.
Though the data in DSO satisfies those condition, but the Cube is still not being loaded.
All the loads are managed through Process Chains.
Would there be any reason in specific/particular for this type of problem?
Any pointers would be of greatest help !
Regards,
Yaseen & SoujanyaYaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a> -
Issues while loading data to the Essbase.
Hi All,,
I'm trying to load data to essbase and i'm getting the following error.It says unknown source.But when i do the reverse it is working fine without any errors.
I'm doing a simple data load from the file..Please help me.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 23, in ?
com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData(Unknown Source)
at sun.reflect.GeneratedMethodAccessor100.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx125.f$0(<string>:23)
at org.python.pycode._pyx125.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.j(e.java)
at com.sunopsis.dwg.cmd.h.z(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Caused by: com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.checkMaxError(Unknown Source)
at com.hyperion.odi.essbase.ODIEssbaseDataWriter.sendRecordArrayToEsbase(Unknown Source)
... 31 more
com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: Error records reached the maximum error threshold : 1
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.j(e.java)
at com.sunopsis.dwg.cmd.h.z(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
Thanks
KSorry John,,
I setup the log file and i see the following in my log file..it says that cannot connect to the essbase server...
How ever the user id which is setup in the physical schema essbase server has full rights to essbase server and the application.
2009-09-30 12:03:32,561 INFO [DwgCmdExecutionThread]: ODI Hyperion Essbase Adapter Version 9.3.1.1
2009-09-30 12:03:32,561 INFO [DwgCmdExecutionThread]: Connecting to Essbase application [Test] on [Server]:[1423] using username [hypadmin].
2009-09-30 12:03:33,311 INFO [DwgCmdExecutionThread]: Successfully connected to the Essbase application.
2009-09-30 12:03:33,311 INFO [DwgCmdExecutionThread]: Essbase Load IKM option RULES_FILE = AMORT3
2009-09-30 12:03:33,311 INFO [DwgCmdExecutionThread]: Essbase Load IKM option RULE_SEPARATOR = |
2009-09-30 12:03:33,311 INFO [DwgCmdExecutionThread]: Essbase Load IKM option PRE_LOAD_MAXL_SCRIPT =
2009-09-30 12:03:33,311 INFO [DwgCmdExecutionThread]: Essbase Load IKM option POST_LOAD_MAXL_SCRIPT =
2009-09-30 12:03:33,327 INFO [DwgCmdExecutionThread]: Essbase Load IKM option ABORT_ON_PRE_MAXL_ERROR = true
2009-09-30 12:03:33,327 INFO [DwgCmdExecutionThread]: Essbase Load IKM option CLEAR_DATABASE = None
2009-09-30 12:03:33,327 INFO [DwgCmdExecutionThread]: Essbase Load IKM option COMMIT_INTERVAL = 1000
2009-09-30 12:03:33,327 INFO [DwgCmdExecutionThread]: Essbase Load IKM option CALCULATION_SCRIPT = null
2009-09-30 12:03:33,327 INFO [DwgCmdExecutionThread]: Essbase Load IKM option RUN_CALC_SCRIPT_ONLY = false
2009-09-30 12:03:33,358 DEBUG [DwgCmdExecutionThread]: LoadData Begins
_2009-09-30 12:03:33,358 DEBUG [DwgCmdExecutionThread]: Error occured in sending record chunk...Cannot begin data load. Analytic Server Error(1042015): Network error: Cannot Locate Connect Information For [server]_
2009-09-30 12:03:33,374 DEBUG [DwgCmdExecutionThread]: Sending data record by record to essbase
2009-09-30 12:03:33,374 INFO [DwgCmdExecutionThread]: Logging out and disconnecting from the essbase application.
K
Edited by: kanna143 on Sep 30, 2009 10:35 AM -
Semantic Partitioning Delta issue while load data from DSO to Cube -BW 7.3
Hi All,
We have created the semantic partion with the help of BADI to perform Partitions. Everthing looks good,
first time i have loaded the data it is full update.
Second time i init the data load. I pulled the delta from DSO to Cube . DSO is standard where as Cube is partition with the help of semantic partition. What i can see is the records which are updated in Latest delta are shown into the report rest all are ignored by the system.
I tried compression but still it did not worked.
Can some has face this kind
ThanksYaseen & Soujanya,
It is very hard to guess the problem with the amount of information you have provided.
- What do you mean by cube is not being loaded? No records are extracted from DSO? Is the load completing with 0 records?
- How is data loaded from DSO to InfoCube? Full? Are you first loading to PSA or not?
- Is there data already in the InfoCube?
- Is there change log data for DSO or did someone delete all the PSA data?
Sincere there are so many reasons for the behavior you are witnessing, your best option is to approach your resident expert.
Good luck.
Sudhi Karkada
<a href="http://main.nationalmssociety.org/site/TR/Bike/TXHBikeEvents?px=5888378&pg=personal&fr_id=10222">Biking for MS Relief</a> -
Memory dump while loading data
Hello,
We are facing memory issues while loading data in BW system.
This particular loading process is taking more than 4GB (3GB of EM and 1GB of heap) and still failing.
We cannot increase the memory beyond this. Can you please suggest a way to load the data ?
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 09.03.2010 22:15:49
Error analysis
The internal table "{A:2*\TYPE=%_T00003S00000114O0000015636}" could not be
further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 1140
Number of rows: 30824
Allocated rows: 30824
Newly requested rows: 8 (in 1 blocks)
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 14627872
Extended memory (EM)........... 3004121016
Assigned memory (HEAP)......... 1000024976
Short area..................... " "
Paging area.................... 24576
Maximum address space.......... 4294967295
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"GP44XYX8R5ZMOGVGGMHG0U1U04O" or "GP44XYX8R5ZMOGVGGMHG0U1U04O"
"CONVERT_FROM_MEMORY"Try to load by reducing data package size.
I think you have some routine in transformation/update rule. Check that whether you are using "SELECT *" in that. It may be one reason for this error.
You can check OSS Note 396642, 379266 and 997930.
Edited by: Pravender on Mar 10, 2010 1:09 PM -
Error while loading data into ODS
Hi we have BI for NW04S and CRM4.0. While loading data for a CRM ODS , I have received a error message which I never seen before. Yesterdaya data load was smooth and I only see issue while loading data today
The error message in the monitor is as follows
"Port 'A000000003' does not exists in the table of Port Description' ( message ID E0, NO 31 ).
have anybody encountered this.
Thanks
ArunThanks Marc,
we found the table EDIPOA and found that the port that is missing. It seems that the enytry( row) for our CRM system is missing which has this port as a field in this table.
Not sure whether to manually populate it or it's part of the source system repair etc.
please let me know
Thanks
Arunava -
Issue while loading berkeley database
Hi,
I have an issue while loading data into the Berkeley Database. When I load the xml files into Berkeley database, some files are being created. the files are named something like db.001,db.002,log.00000001 etc. I have a server running which tries to access the files .When I try to reload the Berkeley db while my server is running, I am unable to load the Berkeley database. I have to stop the server, load the berkeley DB and restart the server again . Is there any way in which I can reload the database without having to restart the server. Your response would be of help to me to find a solution to this issue. I am currently using Berkeley Database version 2.2.13
Thanks,
Priyadarshini
Message was edited by: Priyadarshini
user569257Hi Priyadarshini,
The db.001 and db.002 are the environment's region files and the log.00000001 is one of the environment's transactional logs. The region files are created when you use an environment, and their size and number depend on the subsystems that you configure on your environment (memory pool, logging, transactions, locking). The log files reflect the modifications that you perform on your environment's database(s), and they are used along with the transaction subsystem to provide recoverability, ACID capabilities and protect against application or system failures.
Is there a reason why that server tries to access these files ? The server process that runs while you load your database should not interfere with those files as they are used by Berkeley DB.
Regards,
Andrei -
Hi All,
I am getting this error message while loading data in BW. The eeror message is below:
Data not received in PSA Table.
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump.
When I checked the short dump it is as below.
ShrtText
An SQL error occurred when accessing a table.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer termination messages, especially those beyond their normal deletion date.
How to correct the error
Database error text........: "ORA-14400: inserted partition key does not map to any partition"
Internal call code.........: "[RSQL/INSR//BIC/B0000541000 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
How to correct the error
Database error text........: "ORA-14400: inserted partition key does not map to any partition"
Internal call code.........: "[RSQL/INSR//BIC/B0000541000 ]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"GP12DW003276UZE34XM7O2QXLER" or "GP12DW003276UZE34XM7O2QXLER"
"INSERT_ODS"
Can someone suggest me what should I check?
Thanks in advance.Thanks a lot Manga. I did what you told and it gave me this error message.
Inconsistency: High value for table /BIC/B0000541000: 0002 ; PARTNO value in RSTSODS: 0022
So you mean to say once I click on correct error button, it should be good. So after that if do the loading, it should not give me this problem if I am right.
But can you tell me what exactly does that error message mean? Also is this not an table space issue. I have to wait to correct that error as DBA is currently looking into it.
Assigned points. Will assign more points if the issue resolves.
Maybe you are looking for
-
How do I turn off apps running in the background on iOS7?
I just updated my iPhone 5 to iOS7. How do I turn off apps running in the background? Double tapping the home button and turning each one off doesn't work on the updated iOS.
-
I was prompted to download newest version of itunes, which I did and the restarted the computer. Now it says itunes is currupted or installed wrong. What do I do so that I don't loose my music and apps.
-
How can I automatically archive my text messages?
Is there a way to archive my text message conversations somewhere (iCloud, Gmail, Dropbox) and have them automatically sync at regular intervals? Please note I'm talking about ongoing archival, not just restoring a backup. Thanks for any tips.
-
Populate v$session.module with BO report name in oracle database
Post Author: yoavb CA Forum: Administration Hi, This is the first time i am asking question in this forum. If its the worng place for this question please feel free to move it to the right place... I am using BO against oracle 9.2.0.8 database. In or
-
Safari flips to previous page without intervention
I'll be typing along and suddenly I'm looking at the previous page. Trying to go back is an iffy thing as in some websites, if you leave the page, it dumps your typed entry. Just lost about ten minute worth of work. Not a happy camper. How do we g