Short pause in playback when Saving a change in Get Info

Hello,
Just upgraded to the current iTunes 8 from 4. Now whenever I save some info in the Get Info screen, +playback pauses+ for a moment as it's written. It didn't happen with the old version. An hour's Googling hasn't shown up anything, although I remember reading something about it in the past.
Anyone any idea how I avoid this problem in the current version?
Thanks
Dave

Don't update info. for the currently playing track... I don't think there's much you can do apart from that, although it seems that after one edit, subsequent edits of the same track don't trigger a pause. It may also be dependant on whether the edit requires that the full track & tag be rewritten, to accomodate artwork for example, or if it can be achived by updating the header alone.
tt2

Similar Messages

In iTunes I click on a song and when I click on the "get info" tab, it opens up but everything is gray - locked, therefore, I cannot edit the year or genre of the songs. Not every song is locked, only certain ones for some reason. Any help?

In iTunes I click on a song and when I click on the "get info" tab, it opens up but everything is gray - locked, therefore, I cannot edit the year or genre of the songs. Not every song is locked, only certain ones for some reason. Any help?

I ran into the same problem, I think that, If you tab on a song that is on your IPOD, and the song data is grayed-out, I think it means that the song is probably twice on your IPOD and that the iTunes directory can not edit THAT song data for two (or more) files @once. Check if this is the case, sinceI have the same problem,am looking for a way to have One and the same song in more playlists but only keep the song once on the IPOD.

Album Info won't change in Get Info?

For whatever reason when i updated Itunes i had albums split up. The names changed on some of the albums. Going into Get Info i can type in the right album title but it doesn't change the album listed so it stays seperated. I have gone into all the settings that i can think of and am at a loose as to how to fix it. Someone PLEASE HELP!! I need this issue fixed so my library is all correct and consistant.

I have gone through and even triple checked everything matcheds on deleting all the grouping, composer, and comment info so everthing matched. The Artist, Album Artist, Album, and years all match. I took out all the track numbers, even though that shouldn't have anything to do with it. And on top of everything i have EXTENSIVLY made sure that there isn't a space extra in or at the end of a word that would be messing with it. What is really frustrating me is that i can change all the info to be right on the Info tab under "Get Info" but when i click on the summary page it still shows the wrong info. No matter what i do i can't get that to change. Even clicking ok and going back into the info tab it still shows the changes i made but the summary doesn't match. Very frustrating!!

Name change in "get info"

I changed my name while in finder> get info and lost all mail and safari info. When I try and change it back it says name already taken choose a different name. How do I get back to the original name

Double-click the hard disk's icon in the Finder, and then open the Users folder. From here, rename folders so that the folder with your data has the name previously used by the folder with the house icon, log out, and log back in.
(20342)

Change All / Get Info issue. How to set which application opens a file?

Hello,
I would like to be able to set which application opens a specific file, but cannot get the 'Change all' option in the get info to stick, or to have scvope beyond the immediate folder. For example: whenever I download an.xml file and try to open it the application it defaults to is 'Property List editor' - so I have to go into 'get info' and set the application that I want to use to open the file. Let's say - Textmate. That file will then remain set, for the length of that session anyway - but clicking 'Change all' will not mean that the next file downloaded will default to 'Textmate', or that any .xml files outside the folder will open in Textmate. I have to set them all manually, which gets to be a drag.
I once had a little open source app. that I used to set the preferences as to which application opened a specific suffix - which worked with some, some of the time... but after a clean install I lost it - and can't remember what it was called. Anyway, it didn't entirely solve the problem, only lessened it.

[Mac OS X: Double-Clicking a File Opens the Wrong Application|http://support.apple.com/kb/TS2291?viewlocale=en_US]
*Changing the application used to open all files of a certain kind*
1) In a Finder window highlight a file of the kind you want to change the application to open that kind of file.
2) While that file is highlighted, select File > Get Info or press command (apple or propeller icon) + i to get a file information window.
3) In the lower part of the info window there is an "open with" menu with a list of applications.
4) If your application is already in the box then it is the default application for opening that kind of file and you don't need to do anything more. Close the get info window.
5) If the application showing in the menu is not the one with which you wish to open the file then select a new application. If your application does not appear there then select the "other..." and track down the application (usually in the Applications folder at the main level of the computer).
6) If you wish to change all files of this type to open with this application in future, make sure the "change all" button is selected.
7) Close the get info window.
I know that what I posted may have been what you have been doing, but wanted to double check.
I don't know to what application you are referring but application/file type association is done by Launch Services. Potentially this can become corrupted. You can use Onyx (free) utility to rebuild LS, but in doing so you will lose all non-default associations.
As with any problems, I would also make sure you have run disk utility to verify and repair your drive, and repair permissions on your computer, before doing any other actions. It's surprising what that can clear up. You can slo just try starting in Safe mode, then restarting normally and see if that helps.
[Mac OS X: Double-Clicking a File Opens the Wrong Application|http://support.apple.com/kb/TS2291?viewlocale=en_US]
[Mac OS X: Starting up in Safe Mode|http://docs.info.apple.com/article.html?artnum=107393]
[What is Safe Boot, Safe Mode? (Mac OS X)|http://docs.info.apple.com/article.html?artnum=107392]
[Safe Boot takes longer than normal startup|http://docs.info.apple.com/article.html?artnum=107394]

How do i keep windows from pausing headphones playback when i close the lid?-HP PAVILION DV6-6C57NR

I have set up the powersaver power scheme edited to "Do Nothing" for lid action yet audio pauses. On my old win vista laptop it worked fine. After viewing Microsoft Answers I determined that it is an HP problem. I don't know how to procede. I am runing Windows 7 64 bit whith beats audio. Thanks in advance for any help.

Hi,
Welcome to the HP Forum!
linval_lee wrote:
.i will be going to the caribbean but i want to be able to have access to uk programme while i am away, i was told that the apple mac, prompt you when you are outside of your home region and ask if you would like to change your region or keep your home region, now that is kool, hats off to the mac for that.
i have a HP Pavilion DV6 and i am using windows 7
Which "UK Programme" are you referring to?
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. That will help another person facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Logic not responding when saving or changing settings & Can't record audio

I have just started to use Logic for the first time (installed it a month ago and now trying to use it).
I have the latest version of Logic, OS X and have a MacBook Pro.
I do not have any external hardware or plug-ins installed.
PROBLEM:
Whenever I try to save or save as a song (even when there is no MIDI or Audio in the tracks) the colored pinwheel spins forever.
I also was trying to figure out how to record audio. I discovered that there was no path for recording audio which might be the problem why I couldn't get it to record (see below), and when I clicked the select path button it also froze on the spinning pinwheel.
Audio Recording Problem:
I set one of the default Audio tracks to Input 1 (built-in microphone) and I see the monitor responding to sounds, but when I turn on the record button on the track and then click record, the mic is still working but nothing is recorded in the track. When I open Garageband and record it works perfectly fine.
Help?

I had many problems with my Mac G5 2.7 refurb/Logic 7.2.1 when I first got it back in March. Although my problems were different than yours some things I remember doing that helped:
Trashing Logic's preferences fixed a situaution where my Logic windows were flashing randomly and Midi info was corrupted causing my Mackie Control Universal and my Korg Triton to freak out Logic.
Repairing disk permissions because 2 times Logic did not totally install correctly. Yes I reinstalled Logic at least 4 times to figure out why I was having freezeups system wide.
Working closely with Apple Care documenting my problems and finally getting my local Apple store in our local Mall to change out the motherboard, dual processors and optical drive. Yes essentially a new computer. Since that time I have not had one system wide freezeup (any wood around here)
or major problem.
AT one point running the "Quick Test" from Apple's startup disc showed a Bad RAM chip. Again not related to you but running the test could show something.
I have 2 issues left to fix - Logic 7.2.1 for me has a transposition problem. Midi tracks will show up after I open a song file transposed down a step. The fix is to reboot Logic which is a pain. 2nd - Annoying beep coming from my power supply. Beep is audible in studio near the tower and is also in the audio chain coming out of speakers. No fix yet but again I'm working with Apple Care.

When saving MHTML files I get the IE icon instead of Mozilla.

When using Mozilla/Firefox, I cannot save new MHTML files with Firefox icon-the icon appears to be the same as "Text icon". Also, I cannot use the "Opens With" to change existing MHTML files from IE icons to the Firefox icon. Some FF icons are correct, such as FF startup icon on desktop and in "Start" button menu. All other HTML files on desktop and in folders still show the original IE icons. By deep Googling, I find suggestions to delete "defaulticon" and other tweaks to the registry. None of these seem to work and make the problem worse.
Using XP Pro, SP3.

What kind of file extension do those files have?
I would assume that that file extension is associated with IE because Firefox can't handle such files and IE can.
You would need to change the default icon for that file extension in Control Panel > Folder Options > File Types

DVD SP crash when saving project, can't get it back!!

Oh no, just one save and the whole project as crashed leaving the original file corrupted and unable to open.
DVD SP says it is an invalid file format.
Is there a way to get the project back?
Help!

I'm in the same boat.
http://discussions.apple.com/thread.jspa?threadID=1267653&tstart=45

ONE song refuses to change using Get Info

This one's a bit weird... I have one song that refuses to change even though I've modified the Artist name, tried to remove the artwork and change the genre. At first it shows the change (and even appears to have moved the file from one artist-name folder to the correct one). Then, I look back at the file and it's back where it was originally!
Not sure if it has anything to do with it, but I've also noticed that the artwork wasn't full (the bottom half is all grey). I've actually tried deleting and reimporting the song but with the same result.
I did a quick search for this issue but didn't see any posts that looked like they addressed this. I don't use artwork, however my next try will be to add a different cover just to see if I can then make the changes stick.
I have over 25,000 songs that will keep the changes I make, why am I getting stuck on this one???

Ok, no idea why this kept happening in iTunes, but I was able to change the tags using a different audio program then import that version into iTunes and the changes stayed...

Why won't iTunes save my Album Artwork when I drag it to "Get Info"?

In previous versions of iTunes I could copy/paste or drag JPEG copies of album art into "Get Info" for that album. With the latest update that is no longer possible. Any suggestions?

.wav tracks don't have a tag, so you can't save artwork, or indeed other metadata to them. Use AIFF or Apple Lossless if you want the highest quality, but 256k or 320k mp3 may be just as good depending on the equipment you have and your own hearing.
tt2

Unresponsive Script Error when Saving Changed Set in Flickr Organizer

I'm getting an unresponsive script error when saving a changed set in the Flickr organizer.
The problem started when using Firefox 3.6.8 or maybe an earlier version. It persists in Firefox 3.6.12
I've noticed the error only appears in the Organizer and only when saving a changed set or saving after deleting a set.
It does indeed save the changed set correctly before crashing.
It is not intermittent and happens every time I perform this save.
The error does not occur in Chrome or Safari.
Examples of the error messages can be found at
http://www.flickr.com/photos/blazer8696/4897580573/
and
http://www.flickr.com/photos/blazer8696/4897656175/

Upgrading to 4.0.1 has corrected this problem.

Error in BP when saving a transaction type

Hi Gurus!!! first of all merry xmast!!!
I need you help since I cannot see where the error is. I am using CRM 7.0 and in the UI when saving a transaction I get the following errors "The region 00 is not defined for country" and "The country is not set". I have made the following verifications:
UI
--> Assingment Block: Parties involved I have checked that both the customer and employee responsible have the country and region
--> The transaction type used does not have the field "country".
GUI
--> PPOMA_CRM: I checked that the organization has the country set.
-->BP :I double checked that the BPs customer and employee responsible have the country and region assigned.
What`s wear is that I seem to be the only one who has this error so I`m reallly confused on how to solve it.
Please help me,
Thanks a lot!!!
Regards,
Lorena.

Hi,
Is this happening for all the types of Transactions like Sales, Service, etc.? Is that data that you are using is proper? And can you check if the countries are properly maintained in the system? Check if the country is a mandatory parameter or some country specific checks are executed in the system.
You can check for the countries in the System from transaction code - SPRO -> SAP NetWeaver -> General Settings -> Set Countries -> Specify Countries for mySAP Systems.
Hope this will help.
Thanks,
Samantak.

Tables dropping out when saving PDF files

I have saved a document through writing to PDF in the Print dialog and also by exporting as PDF, but with the same results. In a 40 page document 3 of the tables get dropped out when saving so all I get is blank space where they should be.
Perhaps related is an interesting printing problem. When I print the entire document these same three tables are missing. But if I go back and print only the pages they appear on then the tables will print.
Any suggestions?

Happens with a Konika-Minolta Magicolor, a Brother 1470-N and an HP Laserjet.

How can I change "get info" on songs purchased through the Cloud?

Since upgrading to Mountain Lion, I have been unable to change any album info on songs that were purchased through the Cloud. this wasn't always the case. As we know, iTunes sometimes places songs/albums, etc., in the wrong category or genre. I'm simply trying to place it in the proper or desired catetory or place all songs on one album after iTunes split the album. But, when I right click on GET INFO, all of my options to make any changes are GREYED out and I can't select anything. Only the Summary window and the album artwork window are accessible.
After doing some research I determined that it is indeed only those songs that have the CLOUD icon beside them. I truly don't understand the CLOUD and how it works enough to even know what I did to change it...or how to change it back! And before the upgrade, that cloud icon didn't exist. Thoughts? ideas? Hope this all makes sense.

Hi,
I presume you mean songs purchased from iTunes Store.
It would appear that you have not downloaded the tracks to your computer. Once you have downloaded the tracks you will be able to change info.
Jim

Short pause in playback when Saving a change in Get Info

Similar Messages

Maybe you are looking for