Should I return a HGST 7K1000 1TB drive that has "Pre Fail" attributes in SMART?

Hello,
I recently bought a drive from OWC (Other World Computing) and already this follows:
smartctl 6.1 2013-03-16 r3800 [x86_64-apple-darwin12.3.0] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family:     HGST Travelstar 7K1000
Device Model:     HGST HTS721010A9E630
Serial Number:    JR10006PGXWHBE
LU WWN Device Id: 5 000cca 6accd219b
Firmware Version: JB0OA3J0
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Oct 11 17:59:57 2014 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 245) Self-test routine in progress...
50% of test remaining.
Total time to complete Offline
data collection: (   45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: (   2) minutes.
Extended self-test routine
recommended polling time: ( 165) minutes.
SCT capabilities:       (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail Always       -       0
2 Throughput_Performance 0x0005   100   100   040    Pre-fail Offline      -       0
3 Spin_Up_Time            0x0007   165   165   033    Pre-fail Always       -       0
4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       11
5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail Always       -       0
7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail Always       -       0
8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail Offline      -       0
9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       19
10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       8
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       2
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       143
194 Temperature_Celsius     0x0002   153   153   000    Old_age   Always       -       39 (Min/Max 19/40)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector 0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description    Status                  Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline       Completed without error       00%         5         -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1        0        0 Not_testing
    2        0        0 Not_testing
    3        0        0 Not_testing
    4        0        0 Not_testing
    5        0        0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Should I return the drive? I am a bit scared because my old drive failed and this was to be a replacement.

"Pre-Fail" is a type of statistic collected under SMART, it does not imply the drive is failing.
You should check the "man" page at http://smartmontools.sourceforge.net/man/smartctl.8.html#index to see further details.
Since the drive has been up for only 19 hours, it should work well. The OWC warranty is https://eshop.macsales.com/service/warranty_info.cfm.
If it is a very old drive, but has been recently put in service, it should still provide good service. OWC is usually very good about warranty. You should maintain good backups for critical data, including an on-site and off-site backup, if you can.

Similar Messages

In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?

It's not that simple. You need a "smart" device to connect a hard drive to, like a Time Capsule, or another computer, or an Airport Extreme/Express that was made to share a drive, or some other brand router that has a USB port for sharing a drive, etc.

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs?

I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs. in order to start rebuilding my music collection?

You should be able to recover the media with the tips in this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into a newly authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That should switch the assocation of the device to the new library but it is not something I've personally tested.
When you get it all working, make a backup!
tt2

HT204370 can you return a movie purchased by mistake that has not been viewed yet?

can you return a movie purchased by mistake that has not been viewed yet?

Hi jimmy505,
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Hope this helps ....
- Judy

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

The disk drive in my iMac 8,1 has stopped working, so I now use an LG 8x Slim Portable that works. However, every time I use the LG drive, I lose contact with my Time Machine back-up drive that has to be deleted and reinstalled. Help!

The disk drive in my iMac 8,1 has stopped working, so I now use an LG 8x Slim Portable that works. However, every time I use the LG drive, I lose contact with my Time Machine back-up drive that has to be deleted and reinstalled. Help!

It's not Logic that can't find them, it's your Komplete apps, though if you did exaclty as you say I can see no reason why they can't.
Do you know where the apps installed them in the first place? I chose a non-standard locarion for mine, but I'm sure it installs sounds to your documents folder/native instruments/name of app.
Go into the prefs of each app and choose the library location button on the library tab and point it to the relevant folder in documents/native instruments and see if that works
jake

Can I backup to an external hard drive that has been formatted with windows?

Hi, I am fairly new to mac. I was wondering if I can backup my mac book pro using time machine to an external hard drive that has been formatted with windows. Time machine is saying it must erase to the hard drive in order to do a backup? Please help.

No it has to be formatted for OS X. Mac Extended (Journaled).

How can I edit the database in Lookout OPC Modbus driver OPC sever with the address that has a write attribute?

When I use Lookout Modbus driver OPC to communicate with my instrumnets, I edited the database number such as 41202 that has a Write attribute in my instrumnet manual, the OPC explorer got bad data, and the OPC server gave the illegal address alarm, when I input the address such as 41203 that has R/W attribute, it worked very well. Is there a way to fix this problem. When I used other OPC server, there was no this kind of problem. Thanks!

Thanks for your suggestion. I checked the Modbus manual of my instrument, the register is 16 bit. I tried to edit the data according to the Modbus data member in lookout modbus drivere server for several different member, but the OPC still gave me the illegal address. I think the problem may be produced by their attribute, for the address 1201 and 1202, they have the write attribute, for other addresses, they have W/R attribute, and they can be read or write through Lookout OPC server perfectly. when I used the demo OPC server from other company, it can work well, but it is not convinient for me to use Labview when I use that software. I prefer NI Lookout OPc server. I am using the Lookout 4.5. I am wondering whether the Lookout has some shortcoming when I
use the Modbus driver. Please give me any suggestion, is there any newest version of Lookout OPC sever? Thanks!

How can I backup a drive that has errors?

How do I backup a drive that has this error? So I can re-partition and reformat it.
Starting repair tool:
2013-01-12 16:35:55 +0800: Checking prerequisites
2013-01-12 16:35:56 +0800: Checking the partition list
2013-01-12 16:35:56 +0800: Problems were encountered during repair of the partition map
2013-01-12 16:35:56 +0800: Error: Partition map check failed because no slices were foun
I bought a new 3tb internal drive for my windows machine so I can backup an external drive which I didn't know was mac formatted. When I was trying to extend the capacity of my internal drives in wndows so it would add another 3tb I accidentally chose my exteranal drive and it changed the master boot record although I cancelled the process the drive won't mount in my mac anymore. And I get those errors in the disck utility.
The data in it are very important I was trying to backup it to my sohotank harddrive enclosure which already had a 2tb and now a 3tb installed. Any help would be appreaciated.
I'm now trying to create an image of the mac drive and had reformatted my 3tb drive to Mac just so I can place the image there. I don't know if it would work or it will jus take too long because the progress bar is not moving at all.
Thanks!

sp0radic wrote:
I'll buy software if i have to.
I prefer one full backup then incremental backups.
maybe ChronoSync can do what you want.
good luck !

Can I use Time Machine on an external drive that has files already on it.

Please excuse the silly question. New to mac, from PC.
I have a 200g external hard drive that has my itunes library, photos and other assorted files on it.
If I use time machine on this drive will it delete everything that is there, or can I use it in conjunction with the other files that are there?

You can use a Time Machine drive to save other files on it but I think time machine formats the drive when you first activate it so you will have to temporarily move your files while that happens. You best bet would be to partition the drive into a time machine portion and another for your files.
Steve

ITunes cannot locate purchased music. It was stored on an external hard drive that has crashed. How can I recover the songs?

iTunes cannot locate purchased music. It was stored on an external hard drive that has crashed. How can I recover the songs?

Hello, nwestpha.
Thank you for visiting Apple Support Communities.
You may find this article helpful in locating your missing media.
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Cheers,
Jason H.

I installed all creative suite /cloud products on my main hard drive which has just failed. I can't

I installed all creative suite /cloud products on my main hard drive which has just failed. I can't open the apps on that drive. How can I deauthorize them when the drive is damaged beyond repair and unresponsive?

Kay5000 you are posting in a pubic forum.
As Ankit stated please try installing and activating Creative Cloud on your replacement computer/hard drive. If you have reached your maximum activation count then you will be prompted to deactivate all your activations. This will then allow you to activate on the replacement computer/hard drive.
For Creative Suite 6 I would recommend that you try installing as well. If you receive a message that you have exceeded your amount of allowable activations then please contact our support team directly. Our support team will be able to increase your activation count and allow you to install on the replacement computer/hard drive. You can contact our chat support at http://adobe.ly/yxj0t6 to make this request.

Bought the extreme then realized my 1TB drive only has firewire connections

How can I work around this issue? I want to hook up my 1TB drive to my new extreme but don't see how I can do it! Why has firewire fallen by the wayside these days anyway?
The lacie does have USB2, but that isn't helping me. HELP!!!

mrhoggie wrote:
USB2 ....
... will give you sufficient speed. especially when you connect your computer to the AEBS with an ethernet cable.
JGG

How do I transfer pictures from a hard drive that has an older version of iPhoto?

My old mac broke, so they removed the hard drive and put it in a case for me, and I bought a new MacBook Pro. I thought it would be as simple as plugging in my old hard drive so I could see all my old photos, but when I try to do so, it says that the version is not supported on this computer. It tells me to update the latest version of iPhoto, but when I go to do that, it says I already have it. I have tried with a different hard drive as well that I used as my back up disk and it does the same thing.
Any help would be greatly appreciated! Its so many years of my life, my wedding, my son's photos since birthday that I'm scared I cannot retrieve!
Thank you!
Leah

Before you proceed, make a backup copy of your iPhoto library, if you do not have a current backup.
Which version of iPhoto do you have? You may need an upgrade to a major new release, and not just an update.
With Yosemite you need to run iPhoto 9.6. A new computer should have iPhoto 9.6 installed. Is that what you are seeing in your Applications folder?
If you are having iPhoto 9.6 installed, double click it in the Applications folder to launch it, while holding down the alt/options key to select your iPhoto library.
When iPhoto launches, it should you prompt, that the iPhoto Library needs upgrading to a new format. Click upgrade, and let it run. It may need some time to finish.
Which was your previous iPhoto version? If it was iPhoto 7 or older, you need to run the iPhoto Library upgrader first. Download, and install it from here: iPhoto '11: About the Library Upgrader
After you installed it, don't forget to run it. It will be installed in Applications > Utilities.

Should I return a HGST 7K1000 1TB drive that has "Pre Fail" attributes in SMART?

Similar Messages

Maybe you are looking for