Show different plots on chart legend

I was wondering if there's anyway to control which plots show up on the plot legend.  I have created a graph that can display different plots (by making different sets of plots visible and the rest no visible) but I can't figure out a way for the plot legend to change with me... I see property nodes to manipulate it's height and position... I can use property nodes to show more plots on the legend, but it will always start at the 1st plot... if I have 2 sets of plot
set 1 = plot 1, plot 2, plot 3
set 2 = plot 4, plot5, plot 6
and I choose to make only set 2 visible
I would like the legend to show plot 4, plot 5 and plot 6 (without showing plots 1,2, and 3).... but I can't figure out how to do this, is it possible?
much thanks!

It is the property name plot.name. Be careful how you fill the name in because the order that is displayed. If you make 3 invisible but want to change the name for 4, I am not sure, but I suspect that it will change the plot name 4.

Similar Messages

  • Pie chart legend showing digit "1" when we set "ignore blank cells"property

    All,
    We have pie chart in Xcelsius 2008 that shows the data with legend value and we have also set the ignore blank cells property to ignore the blank value from column. but once we set this property, it displays the digit "1" in the legend when there is no data.
    we are expecting that nothing should be displayed in pie chart legend when there is no data for the pie chart.
    Thanks,
    Sourabh

    hi Sourabh,
    I could replicate your scenario.
    Workaround is to create a duplicate of this chart. Go to properties of this new chart.
    Go to Appearance ->
    Uncheck
    - Legend
    - Mouse-over values
    - Data Labels
    for this chart.
    Write a logic in excel using 'IF' to verify if your data is empty.
    Use 'Dynamic Visibility' feature to display this chart only when your data is empty.
    Display your original chart if your data is not empty.
    Regards,
    Vamsee

  • Problems On Show Chart Legend in Crystal Report Java Viewer

    Hi all,
             We found the problem on show chart legend values of each column, i have already set the "Tool tip text " option by formart chart, but the ouput on java viewer on can show first column data. seem Java view not support for display Tool Tip by chart columns ?
    Thanks
    Andrew

    i missed the following line in my code.
    rcDoc.DataDefController.FormulaFieldController.Add(oFormulaField);
    now it works......
    my next issue is that,
    chart returns True & False captions. but i want to show actual value. how its to be done
    regards,
    Padmanaban V

  • Chart legend shows database field instead of value

    Hi,
    I would like to understand the behavior of the charts legend, which sometimes display the field values as requested, but sometimes display the database field name starting with a @.
    We develop Crystal Reports and then generate them via an application. We have many releases of our application and therefore we get to work with Crystal versions 10, XI, XIr2 and 2008.
    In all cases, the legend display is correct when in the Crystal Reports Designer preview mode. However when generated through our application (using ADO.NET), depending on the Crystal runtime version (apparently) the result varies. Editing the legend label in preview mode doesn't resolve the issue.
    Is this behavior related to :
    - Crystal Reports runtime (it appears to happen only with Crystal Reports runtimes XIr2 and 2008 in our case) ?
    - Using formula fields in the chart instead of database fields directly ?
    - Evaluation time (our charts are in Report Header and/or Group Header) ?
    - any other idea ?
    Thank you very much
    Anthony

    We have been able to detect that the Language Regional Settings of Windows XP Pro has a direct effect on our charts legend display.
    We noticed that when the Regional Settings were set to English, the report would generate correctly and chart legends would display values, and not database fields names. However, when the regional settings are set to another language (tried French, Dutch, Spanish and German) the problem occurs.
    Using Process Monitor we have spotted that when in Regional Settings other than English it was still the English dll that were called (crdb_adoplus_res_en.dll)...
    The problem occurs with Crystal runtimes XIr2 and 2008 only. We use Crystal Reports in an application, using ADO.NET connector, and we use the Crystal runtime to generate reports.
    Is this a bug or is there a workaround to make sure the correct dll are called according to regional settings ?
    Thank you for your kind assistance.
    Best regards,
    Anthony

  • Reducing plots shown in legend causes error

    I am using a waveform chart for a classic scope display, channel 0, channel 1 and math. Sometimes however I would like to set up the scope so the math channel is configured on the waveform, but not displayed, and not displayed in the legend either. It's easy enough to set it up to not be visible on the waveform, but making it not visible on the legend, either by reducing the number of plots shown, or by changing the legend height, so that in effect, the number of plots shown is reduced--either method makes later attempts to modify settings for the math channel cause an error (setting the active Y scale = 2 causes an error, since math is the 3rd scale, or 2nd w/ 0-based indexing).
    Is there any way to make it not visible in the legend without causing an error for active scale or other properties I would like to set?

    First, I was confused in my statement on Scales versus Plots. You were correct in your reply, and I went back and looked at my code, which was actually using the Active Plot as you said it should have been, not Active Scale. I do use separate scales for each plot, hence my confusion, but that was not directly related to the problem I was having.
    Second, your example was most helpful--thanks for posting that.
    Third, after seeing that your example worked as desired, I tried to make it line up with my version of reality It didn't, so I started to look into the differences.
    - I am using a dynamic signal waveform graph instead of the kind you used.
    - I rewrote your example with a cut and paste of the waveform graph I was using. The property nodes had to then be re-selected properly since the names didn't correspond on a 1 to 1 basis changing over to the dynamic signal graph (for instance Plot.PlotName -> Plot.Name)
    - After some hair pulling, I tracked down the errors I was having and was able to reproduce them in simplified form using your example.
    As it turns out, the root cause of the errors I was having is not having data displayed. I was trying to set up the graph and plots, colors, names, etc... before writing data. As you can see from the modified example, that doesn't work real well, unless you write an almost null array (1 set of zeroes) to the indicator. A lot of the confusion came from getting errors sometimes when trying to set the Active Plot, and not getting them other times--no reproduceability.
    In the attached example, you can see that by setting math visible in the plot legend, you can modify the name and color, but then setting it invisible then visible again erases all the settings for that plot, so long as no data is displayed on the graph for it. With no data, and no visibility in the legend, trying to modify the active plot settings results in errors. I'm not sure whether this is a 'bug' or a memory management feature of dynamic waveforms, but it has definitely caused me quite a few headaches in the last few days. I think the short of it will be to initialize with a set of zeroes and that should take care of things. Thanks again for posting your example.
    Attachments:
    Show-hide plot.vi ‏158 KB

  • Problem: chart-legend (numbers) doesn't copy into Keynote

    I have some charts from numbers (imported xls-files) that i want to copy into a keynote-presentation.
    The chart can be pasted into the presentation, but the chart-legend never shows up.
    I've tried selecting and copying the chart and the chart-legend but that doesn't work. Copying only the chart-legend also doesn't work.
    Can somebody help me out here?
    thanks,
    jojo

    Jerrold Green1 wrote:
    For some reason, you need to Arrange > Group your Chart and Legend before Copying if you want them to stay together. Not sure why this is so, but the fix works.
    My guess is:
    when we copy paste without leaving a given program, we use a structure of the clipboard defined by the program itself. This structure gives the ability to copy paste different kinds of objects.
    For instance, if we copy a chart and its legend in Numbers and paste in a different location in a Numbers document, which may be a different one, we paste the chart and the legend.
    When we leave the source program to a enter a different program, if the proprietary clipboard format of this program is different than the source one, the clipboard's contents is "normalized" to match the destination program's requirements. When we pass from Numbers to Keynote, a clipboard containing a chart and a legend is normalized as a graphic object.
    If we try to paste in a TextEdit document formatted as a Text one we will get nothing.
    If we paste in a Textedit document formatted as RTF, we will get the chart.
    My hope is
    (a) that the iWork team build a proprietary clipboard structure common to the different components of the suite. I feel that this may be done.
    (b) that the operating system is able to transfer the proprietary clipboard components between two programs using the same. I'm not sure that this requirement is satisfied at this time.
    Yvan KOENIG (from FRANCE vendredi 26 décembre 2008 15:23:48)

  • Bubble chart legend problem

    Hello.
    I have problem with bubble chart the problem is that in chart legend appear the same number of object what bubble in chart e.g. if chart have 5 bubble then legend also have 5 object.
    What do I want to obtain is that in chart appear bubble which have different color (color depends on condition) and legend relate only colors. For example if chart have 4 bubble 3 - red and 1 - green then in legend appear only two position which relate green and red color (now appear 4 object three about red and one green).
    Can any one tell me how to resolve this problem?

    I already did this I added three condition (three colors red, green and yellow) in field "Value of" I choosed "is equal to" unfortunately it didn't help.
    Maybe I joust try to describe what I want to show in this chart.
    Suppose I have table with four columns u201Cdateu201D, u201Camount (number type)u201D, u201Csize (number type)u201D, u201Crisku201D (text type) now where this value appear on chart:
    - date is x axis
    - amount is y axis
    - size is a bubble size
    - risk will be bubble color
    Now I have 3 kind of risk u201CLowu201D (green color), u201CMediumu201D (yellow color) and u201CHighu201D (red color).
    Now in my data base I have table with record:
    - u201C11-11-2009u201D, u201C1u201D, u201C2u201D, u201CMediumu201D
    - u201C12-11-2009u201D, u201C2u201D, u201C1u201D, u201CMediumu201D
    - u201C13-11-2009u201D, u201C1u201D, u201C1u201D, u201CHighu201D
    - u201C14-11-2009u201D, u201C3u201D, u201C3u201D, u201CLowu201D
    - u201C15-11-2009u201D, u201C1u201D, u201C1u201D, u201CLowu201D
    Ok so now In My chart I should have 5 bubble and in legend three value (green, red, yellow) but in this case I always have five (the same number what record in table).
    Sorry if this example is not clear.

  • How to programatically (dynamically) change the chart legend ?

    How do I add new labels/symbols to the chart legend dynamically ?
    I'm creating a scatter graph using the query
    select A,B,C from tableX group by A
    B is the y-axis, C is the x-axis. Points plotted for each grouping of A will be a different color. I know I can change the color of the point to be plotted thru the format trigger. The format trigger will change the color of the plotted points when there is a change in the grouping of A. My problem is how can I add a new label/color to the legend for each grouping of A as it is plotted ? The number of groupings of A is variable depending on what's in tableX. I need to programatically create the legend (each grouping of A will have it's own label/color) thru the format trigger as I won't know before hand how many groupings of A there will be.

    Try with Presentation variables.

  • Highlighti​ng different plots

    I have an application where I generate10-20 different plots on one graph.  I know how to use the legend, but it's still tough to see which plot goes with which data set.  Is there a way have the individual plot names show up when I mouse over a plot?  It would be like the excel plots.  When you put your mouse over top of the plot, it tells you which data set your looking at.

    You can find code which will tell you which plot you're closest to here.
    You can modify that to get the plot name even without clicking and to display it.
    Try to take over the world!

  • SP2010: Different colors for chart bars in Chart Web part with single data series?

    Hello,
    I've been asked to create a chart for visual display and summary of Status values within a SharePoint list of job positions. The list of positions includes a Status field with the only values being Open and Closed. I created a page that shows the list, and
    at the top I inserted a Chart Web part that displays two bars - one showing the number of Open positions and one showing the Closed positions. Because I was having difficulty getting the totals for each Status value to show up in the chart, I followed
    the instructions at
    http://highbrowse.wordpress.com/2012/07/04/chart-counts-from-sharepoint-lists/ and pointed my chart at the new "Status values" list - this worked well to display the sum counts for each of the two Status values in separate bars.
    This was all fine and good, except that because I am only using one data series for my chart, both of the bars (for Open and Closed) show up as the same color. I've been asked to make them different colors but cannot figure out how to do so. Can someone
    provide guidance on how I could make the two bars different colors? Thank you so much.
    cheers

    Hello,
    as far as I know, the chart web part does not have any settings to change the color of individual data points or plot data points of a series in different colors. If you only have two values in the series, you could use a pie chart instead of the column
    or bar chart. In a pie chart, the different slices have different colors.
    cheers, teylyn

  • Plot a chart dynamically based on the values selected

    Hi All,
    I have some requirement like this i want to plot a chart . The chart should change dynamically based on target_name and date. What type of UI should I use ? I tried using multiselect or shuttle for choosing the target_name and date picker tool for date once i choose all this the chart should appear. Can I have a custom button called submit so once all the values are entered it plots chart ? Please help me out with our ideas.
    Thanks in Advance

    Hi,
    Using the dependent value sets you can govern the values which can be selected based on a specific value selected in a particular segment. Example if Country name is selected in segment 1 then specific states names as per the country selected can be displayed in segment 2.
    As per the requirement described you want to enable different fields based on the value selected in segment1, currently there is no standard mechanism available to enable/disable fields based on a value and you will have to do an extension/customization to meet this requirement.
    Thanks,
    Sanjay

  • Custom Formatting Of Chart Legends

    I've been playing with Flex Charting, and I have lots of nice
    looking graphs that I've created from database feeds. However, what
    I really want to know how to do is format the chart legend better.
    For example I have a pie chart that has about 50 different data
    items/series and the legend is huge in either horizontal or
    vertical mode it prints all the way down the page. How can I make
    it two, three or more columns?

    Hi Justin,
    I think, there is no way to do such a customization with the standard Javadoc (i.e. powered by the Standard Doclet).
    After all, the job of the standard Javadoc is doing standard (general) things and I just cannot imagine any general rule (setting or option) that would embrace all kinds of possible customizations about displaying of annotations.
    So, the only way in your situation would be to modify the doclet itself. You can try tweaking the standard doclet: overload some its classes or change sources (according to the license they provide). However, I just can say, that way proved to have lots of limitations.
    Fortunately, I could suggest you a different rote that would allow you solving your problem in a few minutes. We have a product called "DocFlex/Javadoc":
    http://www.filigris.com/products/docflex_javadoc/
    This is a highly customizable Javadoc doclet. More exactly, this is a system for rapid development of professional quality doclets (with the support of both framed/single-file HTML and RTF output).
    With that tool, the generation of every sort of Javadoc output is programmed in special templates (using graphic Template Designer). The product is provided with the "standard template set" that generates the HTML Java API documentation very similar to the standard Javadoc.
    In fact, to solve you task, you will need to modify a subtemplate called "annotations.tpl". See on this page: http://www.filigris.com/products/docflex_javadoc/templates.php
    If you are interested about all this, we could help you to modify the necessary template absolutely free. Then, you will need only to buy a full product license to have everything work without limitations and that will be all!
    So, if you are interested, please let us know by sending a e-mail to the address found on this page:
    http://www.filigris.com/company/contact.php
    Regards,
    Leonid Rudy
    http://www.docflex.com

  • Flash Chart Legend Problem

    Hi,
    Im having a problem with my flash chart legends in Apex3.0.
    I have changed the name of the Series to what i want to appear in my legend - however the legend just shows "Value" for all my Series.
    Does anyone else have this problem?
    Cheers,
    Immanuel

    Hello,
    I need a legend like this
    No of Clicks('000)
    If i give l" No of Clicks('000)" as column alias, chart says Error :No chart data available.
    If i give "No of Clicks('000')" or "No of Clicks(''000)" as column alias in the query, it displays the correct legend..
    Would anybody tell me how to show the legend like this
    No of Clicks('000)
    Regards,
    Archana

  • Chart Legend order

    Hi All,
    I have created a chart ( line chart ) that shows trends. The egend shows up in alphabetical order which is fine but it does not match with the order of lines in chart which is confusing. Can someone please help me if there is any workaround to aligh legend value order with lines in chart.

    HI,
    Please try the below this worked for me:
    Right click on Chart and Select u201CChart Expertu201D -> u201CDatau201D tab.
    Select the field from u201COn Change Of Fieldu201D
    Then u201COrderu201D button will enable.
    Click on the u201COrderu201C Button , it will opens u201CChart Sort Orderu201D window.
    From the Drop down box select any one of the Sort Order.
    It will reflect on your chart legends.
    Also you can follow the below Forum posting:
    http://forums.sdn.sap.com/thread.jspa?messageID=11036283#11036283
    Cheers,
    Kiran
    Edited by: Kiran Suravajhala on Feb 24, 2012 3:41 PM

  • Reporting Services Chart Legend Label

    I am creating a chart from analysis services cube data
    data is like this
    District            Year          Value
    A                    2001          10
    B                    2002          29
    (null)              2003           19
    The charts are creating fine but the legends are not showing fine. In series group i have also tried to use an expression to fix the null label.
    For null value the label is created as "Series 1". I don't want this to happen. for null value i want my chart legend to show as "State"
    Any help will be appriciated
    Regards

    Hi,
    You can use expression to achieve that. In series group, set the group on expression to be:
    =iif(Fields!<District>.Value is nothing, “State”, Fields!<District>.Value)
    Also, set the label expression to be:
    =iif(Fields!<District>.Value is nothing, “State”, Fields!<District>.Value)
    Hope this helps.
    Raymond

Maybe you are looking for