Show Exception, but NO values
Hi all,
Is it possible to NOT show the values in a query (in a webtemplate) but DO show
the exception-color?
Thanks in advance!
Hi,
(An idea I have not tried yet )As you are doing this in web reports, you can modify the css being used. Like for Good 1:
.SAPBEXexcGood1 {
font-family:Tahoma,sans-serif;
background-color:#5BCB77;
<b>color:#000000;</b>
font-style:normal;
font-weight:normal;
font-size:x-small;
text-align:right;
margin:0 1px 0 1px;
padding:1px 3px 1px 3px;
Here change color:#000000; to color:#5BCB77;, which would make it the same as the background color (green) and hence 'invisible'
Hope this helps...
Similar Messages
-
Exception aggregation - Last Value
Hi,
We are having requirement where we have a table in non R/3 system for SKU - Customer level closing stocks on particular day are maintained. We want to create a cube for the table in BI. This table contains entries for SKU + Customer for diff days. We want to show the closing stock of last(/latest) day for which Customer+ SKU record exists. To achieve this we have used Calculated Key figure on Closing stock with Exception Aggregation - Last value with ref to Calendar Day.
It woks fine only if I have Customer & SKU both used in query. But we have to show these stocks aggregated on Plant level. (Customer are linked to Plants and it is directly avbl in our cube). In this case aggregation does'nt work.
Lets say following are the closing stocks for SKU- M1 & 3 customers from Plant = 1101
date-> 1/1/2007 2/1/2007 3/1/2007
Cust1 10 15
Cust2 20
Cust3 25
In above case if i have to see closing stock on 3/1/2007 for SKU-M1 @plant 1101 (sum of latest closing stock @ all customer sites under plant 1101), i should get = 60 (152025). But it gives me 15 only.
Could anyone explain how to design a query for this? Or in cube design/uploads it can be managed.
Regards,
Vikram.Hello Vikram
One possible solution I can think of is to use an extra ODS in order to hold your data in an aggregated form that suits you. Unfortunately the exceptional aggregation behaviour does not work outside reporting thus in the transfer rules from your data provider to this new ODS you should add a formula checking whether the new record to be transfered to the ODS has a date newer than the ones already transfered in the ODS. Else it should skip the current record and proceed to the next one.
Another possible solution would be to use the APD and transfer the results of the query you are already playing in an ODS (this way you take advantage of the exceptional aggregation behavior) and by transfering your records to a second ODS you can achieve the aggregation you need.
Assign points if any of the above helped -
Why is zero showing as a negative value?
Does anyone know why zero is showing as a negative value?
Hi Neil,
Not really a bug, just a limitation of the mathematics involved.
You're entering the numbers as base 10 numerals. Computers work in base 2, so before any calculation is done, each number must be converted to its base 2 representation.
All of the calculations are done in base 2, then the results are presented as base 10, rounded to whatever precision you have set (or the defaut precision for currency amounts—to the nearer hundredth of the base unit). What you see is a rounded value, but what is actually in the cell is the result of the calculation, including the rounding errors inherent in the process.
Those errors arise from a simple fact: Not all numbers in base 10 can be expressed exacty in base 2. (Not all numbers can be expressed exactly in base 10 either, but that's a different discussion.) Expression of numbers in the math underlying Numbers is accurate to 15 places (base 10), regardless of which side of the decimal point those places occur.
Each of the "zeros" in your sums involves several pieces of data in the sum, not all of which can be expressed exactly in base 2. In two of the sums, the errors (if any) cancel out and there is no difference between the sum expressed to two decimal places and the same sum expressed to 15 digits. In the other three, this is not true, as can be seen below.
The image is of your test table. Columns A, B, and C have been reduced i width, all non-sum rows have been hidden to reduce the image size, and the SUM cells have been set to show 30 places (the maximum permited in Numbers) after the decimal to ensure that all significant places are shown, and that the decimal points are lined up for easy comparison.
Note that three of the results differ from their displayed (two decimal place) values. The largest difference is in the third value, the smallest in the forth. The absolute difference between expected and actual result in the third of these lies between the other two, but is more noticeable because the result is less than zero and carries the - sign because of that. The minus sign is not "inserted" (randomly) by the software; it's there for the same reason there's a minus sign in the cell containing -103.31 is in that cell: the value in the cell is negative.
"If I replace the cells containing the duplicates eg. £269.57, £90.11 & £103.31 with numbers manually added together £539.14, £180.22, £206.62. - the software doesn't insert the negative."
Nor does it "insert the negative" in the first cell displaying a "zero" result, or the cell displaying a 26.04 result. Replacing those six numbers with six (or three) others changes the translation errors for each of these pieces of the sum, and that changes the sum itself. In this case the cumulative error moved the result from being 'smaller' than expected to 'larger' than expected. The result is now slightly larger than zero, so the minus sign is not needed or appropriate.
Here are two further examples. The sum shown is the one in row 130. The data is the same as in the original table except for rows 126 and 127.
Original values:
Two occurrences of -90.11 replaced with a 0 and -180.22 produced this change in the result. Still negative, so the minus sign wi still be there.
Two occurrences of -90.11 replaced with -90.10 and 90.12:
A surprise! The actual value is zero (to the limits of precision of the underlying math).
But that's not (for the usual user) a predictable result.
Depending what you are doing with the results, you may want to do the rounding proposed by Wayne. This will change the actual vaue in the cell to the displayed value ( 0.00), and will remove the minus sign.
It's not a bug—Numbers follows ISO standards in its math—but you may wish to Provide Numbers Feedback to Apple regarding your (and others) user expectations. You'll find an item with that name in the Numbers menu in Numbers.
Regards,
Barry -
Hi,
In our BO Webi report hierarchy with measure values showing more(almost double value) compare to BW Bex report. Can any one please help on this.
Is it BW problem or BO problem?
I checked in some other threads but it's not given solution.
Thanks,
ManjunathaHi,
Is it BW problem or BO problem? : BO
is it causing problem with hierarchly data only ? without hierarchies data is matching or not?
Post same in SAP BusinessObjects Web Intelligence .
Thanks. -
Outlook 14.4.8 on iMAC Retina and Yosemite 10.10.2 is not synchronizing with Exchange 2007 anymore (shows "downloading" but no new messages shown in inbox".
Accessing Mails with Webbrowser and from Windows Outlook is working correctly.
All Macs (also the ones with OS 10.6.8) do not anymore show any new messages in inbox.
Restarted Server, tried to disable autodiscover on macs and deleting/adding account and repairing database does not fix the problem. Also restarted server several times.
We have the same problem on 2 imacs retina with yosemite and on 2 mac pro with 10.6.8 and different office 2011 versions.
i tried to configure the exchange account in apple mail on yosemite and it also states "connected" and does list some folders but no new mails are getting in.
Windows clients and outlook on them works and syncs fine, and also when connecting via webbrowser at owa it must be a mac-specific/webdav issue.
exchange 2007 Sp3 Version 8.3 (bild 83.6) and Update Rollup 15 for sp3 (automatic updates "HIGH" for server and clients)
there is one update popping up again and again even after everytime successull installation: Windows Mlicious Software Removal Tool x64 - October 2010.
i tried to configure a new user with empty mailbox and configured it with microsoft mail (mac - yosemite) as exchange and was able to send a mail from there (even if quite delayed).
but there are not coming in any mails.
same exchange accounts triggered by imap do work and also via owa.
Exchange Accounts in Outlook for MAC and also in Mail (Yosemite) do show the folder structures but there is no mails showing up. I can send mails from the exchange accounts created but they seem to be processed with a delay of like 15minutes and outlook
is giving error "end of file reached" but messages are send after some time.
Does seem like EWS is extremely slow, to slow perhaps to sync and therefore ending in timeout.
Also i cannot reach the server from externally over ssl https 443. if testing port 443 of exchange from outside the port seems closed even firewall settings of sbs 2008 and sonicwall ports are correctly open.
could it be there is something in regarding webdav which is very slow and leading to timeouts ?
in application log i do have the following two information events every few minute:
The Exchange Web Services started successfully. Event ID 1
and
Process STORE.EXE (PID=3688). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
(Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
SERVER.org.local CDG 1 7 7 1 0 1 1 7 1
Out-of-site:
Errors in Application log:
The Open Procedure for service "BITS" in DLL "C:\Windows\system32\bitsperf.dll" failed. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section
The entry <C:\WSUS\WSUSCONTENT\CONTENTFOLDERACLSCHECK.TXT> in the hash map cannot be updated.
An exception Microsoft.Exchange.Data.Storage.ConversionFailedException occurred while converting message Imap4Message 69447
Also outlook 2011 clients are asked by time to time to reenter pwds and errors like "connection is closed. 13"
Faulting application taskeng.exe, version 6.0.6002.18342, time stamp 0x4cd34898, faulting module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0xc000071b, fault offset 0x0000000000082445, process id 0x3288
Certificate Services Client Provider pautoenr.dll raised an exception. Exception code 3221225477.
Backup Exec:
FULL_BACKUP -- The job failed with the following error: A failure occurred querying the Writer status.
Volume Shadow Copy Service error: A critical component required by the Volume Shadow Copy service is not registered. This might happened if an error occurred during Windows setup or during installation of a Shadow Copy provider. The
error returned from CoCreateInstance
Exchange VSS Writer (instance 2d932ef8-6319-4ab8-a45f-1242480b44ad:15) failed with error code 1295 when processing the backup completion event.Hi,
Since Outlook running on Windows works well, it seems an issue on the Mac side. I suggest ask Mac for help so that you can get more professional suggestions.
More information for your reference:
Please try to verify whether there is any expired certificate from the computer personal store.
If it is the case, please remove them.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Mavis Huang
TechNet Community Support -
UPDATE: /dev/sdc shows up, but no such device. How to remove/reset?
UPDATE:
Please read second post for current problem, although first still applies for the most part.
Original:
=========
Sorry, I couldn't figure out a good title hopefully this is fine.
My problem: I bought a laptop with 2 hard drive bays, I bought a regular HDD and a SDD. They both showed up fine and I initially "just installed" with the regular process via ArchBoot. Everything good still. I decided I wasn't happy with the setup and was actually thinking about getting 2 SSD's instead of the regular HDD so I took out the HDD so I could do an install with just the SDD (while I wait on another SDD to arrive). This went fine, too. I put /tmp and /var/log in tmpfs, etc. But then I realized I should put /var/cache somewhere else since I do a lot of updating and custom packages very frequently. This is where the problem starts:
1. I put in a 4GB SD Multi-Card into the little multi-card reader slot in the front. It showed up as mmblk(..) and I reformatted it as ext4. I rebooted (always like to see logs on initial boot up, etc) and the SD Multi-Card showed up as /dev/sdb instead of /dev/mmblk(..) (while the SSD was /dev/sda). I didn't think too much of it and pointed /boot and / at /dev/sda1 and /dev/sda2 while I pointed /var/cache to /dev/sdb1. Rebooted and everything seemed to work.
2. I second guess myself and wanted to put the regular HDD back in (since it's 500GB) and I have a lot of movies/music I want to watch that will currently fill up the 240GB SSD I had ordered for the second bay (there's a small 60GB SSD for / and /boot stuff that I won't be writing to much). So I put the HDD back in, remove the SD card (since it's no longer necessary) and go through the install process again. ... It cannot find the drive. It keeps complaining that /dev/sdb cannot be read. The logs show nothing except that it sees /dev/sdb but nothing else as with /dev/sda where it goes through identifying name, type, and attaching it.
END RESULT PROBLEM: I can put any drive (the SSD or the HDD) into any of the two hard-drive bays and only /dev/sda gets read. It shows /dev/sdb no matter what, but it cannot read medium. Everytime I boot it will show /dev/sda and /dev/sdb even if I only insert one drive into ANY bay. I try to gdisk or fdisk /dev/sdb and it says medium cannot be read. The only time I get /dev/sdb to read is when I insert that stupid SD Multi-Card. Okay, fine. So I insert both drives into both bays as well as the SD Multi-Card. It still only shows /dev/sda and /dev/sdb.. no /dev/sdc.
So, something keeps making my computer think /dev/sdb HAS to be the multi-card. I used gdisk to erase any GPT tables on every drive and clear the MBR but this still persists. I even inserted my original Windows HDD into the computer and tried reformatting every drive, hoping it would somehow fix it, to no avail--also tried to "dd" all the drives. "dd" cannot read /dev/sdb either. The drives themselves all appear to work fine, it's just that for some reason my computer WANTS /dev/sdb as the SD Multi-Card and nothing else can go there, or after it (e.g. /dev/sdc..). I see /sys/block/sdb/{files} but I KNOW there's no /dev/sdb if I only insert one drive. What the heck. :{ This folder and the /dev/sdb show up on every LiveCD I tried.
EXAMPLE ONE:
Bay 1: SSD
Bay 2: HDD
MCR: <nothing>
/dev/sda shows SSD
/dev/sdb cannot find/read medium
EXAMPLE TWO:
Bay 1: HDD
Bay 2: <nothing>
MCR: <nothing>
/dev/sda shows HDD
/dev/sdb still shows up, cannot find/read medium
EXAMPLE THREE:
Bay 1: <nothing>
Bay 2: SSD
MCR: <nothing>
/dev/sda shows SSD
/dev/sdb still shows up, cannot find/read medium
EXAMPLE FIVE:
Bay 1: HDD
Bay 2: <nothing>
MCR: SDMulti-Card
/dev/sda shows HDD
/dev/sdb shows SDMulti-Card
EXAMPLE SIX:
Bay 1: HDD
Bay 2: SSD
MCR: SDMulti-Card
/dev/sda shows HDD
/dev/sdb shows SDMulti-Card
SSD (/dev/sdc?) NOT shown
Did I damage the BIOs or something? Because it seems no matter what I do, it only wants /dev/sdb as the SD Multi-Card, and will not "find/read/identify" any other drive as /dev/sdb or even /dev/sd{c,d,e,...}, whereas /dev/sda can be either the SSD or the HDD just fine, but they cannot be /dev/sdb or anything else. In the BIOs boot order selection it wont show both SSD and HDD drives if theyre in there at the same time, even though it used to show both before this whole SD Multi-Card fiasco. I tried resetting BIOs but it didn't seem to do anything. I'm at a loss.
Last edited by milomouse (2010-12-24 22:47:25)Original: 12-22-10. Today: 12-24-10. UPDATE:
So, by swapping the drives repeatedly and rebooting with the ArchBoot disc, using a combination of the Windows HDD, the empty HDD and the empty SSD in different positions (all conceivable), I was able to get Linux to "softreset" the devices so that I can FINALLY have both the empty HDD and the empty SSD read/identified at the same time, but only with the HDD in /dev/sda and the SSD in /dev/sdb (while that stupid SD Multi-Card slot keeps showing up, but this time as /dev/sdc). I think Linux is now confused and thinks that the SSD is a flash/SD device or something and therefore can't put it in /dev/sda anymore (after the SD card messed everything up). I guess everything is fine unless I have to switch devices for some reason or possibly have 2 SSDs where one wont read because of this.. We'll see.
My question now: is there any way to REMOVE a device? More specifically, I see /sys/block/sdc/{files} but there is obviously no device and I can't forcefully delete them with "rm -fr" -- I don't know another way. Can I set a udev rule or something to ignore it or possibly/preferably remove it so I can plug in another device later to be read as /dev/sdc instead of skipping to /dev/sdd? This would be great.
Edit: I can do:
echo 1 > /sys/block/sdc/device/delete
and it will delete for that session. But as soon as I reboot it's back. Any ideas? Udev?
Last edited by milomouse (2010-12-24 23:30:11) -
Crystal Runtime exception: Missing parameter values
Our company did a PeopleTools upgrade at one of our clients recently. We upgraded them to PeopleTools 8.50.08. We had to convert all the Crystal Reports to the 2008 format using the RPT converter which is included in the Client install of PeopleTools.
The only problem now is that a lot of the Crystal processes in PeopleSoft are failing with the following error:
Crystal Runtime exception: Missing parameter values.
I've checked the parameters which are being passed to the report and I see both parameters are filled:
E:\HR881\BIN\CLIENT\WINX86\PSCRRUN.EXE -CTORACLE -CDHRMKPDEV -COPSDUT -CPOPRPSWD -I218609 -RP"PUP202K" -OT6 -OP"G:\PS\PSPRCS\log_output\HRMKPDEV\CRW_PUP202K_218609" -LGDUT -OF2 -ORIENTL "2000-10-01" "2002-06-30"
Database type is Oracle. HRMS version is 8.8. I can run the Query which gets the data in just fine and I can also run the report from Crystal fine. This only happens with Crystal reports which have a date field as a parameter/prompt in the report.
There's currently an SR open at Oracle, but I was hoping that someone here can help me nail this issue. I'm not too happy with the quallity of Oracle support, but that's a whole different story.<s>Just to be sure, did you put a space after each parameter name or is it a typo over here ?
E:\HR881\BIN\CLIENT\WINX86\PSCRRUN.EXE -CT ORACLE -CD HRMKPDEV -CO PSDUT -CP OPRPSWD -I 218609 -RP "PUP202K" -OT 6 -OP "G:\PS\PSPRCS\log_output\HRMKPDEV\CRW_PUP202K_218609" -LG DUT -OF 2 -OR IENTL "2000-10-01" "2002-06-30"</s>
Nicolas.
sorry, it was wrong assumption.
Edited by: N Gasparotto on Jun 2, 2010 5:11 PM -
Dump: BCD_OVERFLOW showing exception as CX_SY_CONVERSION_OVERFLOW
Hi Experts,
I am getting the dump as BCD_OVERFLOW showing exception as CX_SY_CONVERSION_OVERFLOW. I have tried to go through the standard notes 1151693, 1147593, 754758 & few others. But I am not able to find the note specific to my software component details:
SAP_ABA 700 0011 SAPKA70011
SAP_BASIS 700 0011 SAPKB70011
PI_BASIS 2005_1_700 0018 SAPKIPYJ7I
ST-PI 2005_1_700 0001 SAPKITLQI1
SAP_BW 700 0008 SAPKW70008
LCAPPS 2005_700 0001 SAPKIBHD01
SAP_AP 700 0005 SAPKNA7005
SAP_APPL 600 0005 SAPKH60005
SAP_HR 600 0002 SAPKE60002
EA-IPPE 400 0002 SAPKGPID02
EA-APPL 600 0002 SAPKGPAD02
EA-DFPS 600 0002 SAPKGPDD02
EA-FINSERV 600 0002 SAPKGPFD02
EA-GLTRADE 600 0002 SAPKGPGD02
EA-HR 600 0002 SAPKGPHD02
EA-PS 600 0002 SAPKGPPD02
EA-RETAIL 600 0002 SAPKGPRD02
FINBASIS 600 0002 SAPK-60002INFINBASIS
CPRXRPM 400 0002 SAPK-40002INCPRXRPM
ECC-DIMP 600 0002 SAPK-60002INECCDIMP
ERECRUIT 600 0002 SAPK-60002INERECRUIT
FI-CA 600 0005 SAPK-60005INFICA
FI-CAX 600 0005 SAPK-60005INFICAX
INSURANCE 600 0002 SAPK-60002ININSURANC
IS-CWM 600 0002 SAPK-60002INISCWM
IS-H 600 0002 SAPK-60002INISH
IS-M 600 0002 SAPK-60002INISM
IS-OIL 600 0002 SAPK-60002INISOIL
IS-PS-CA 600 0002 SAPK-60002INISPSCA
IS-UT 600 0002 SAPK-60002INISUT
LSOFE 600 0002 SAPK-60002INLSOFE
SEM-BW 600 0002 SAPKGS6002
SLL-LEG 7.00 0006 SAPK-70006INSAPSLL
WFMCORE 200 0002 SAPK-20002INWFMCORE
AIN 400 0000 -
The reason for the exception is:
In the current arithmetic operation with operands of type P an overflow
has been detected. Possible causes are:
1. The result field of type P is too small to store the result.
2. The result or an intermediate result has more than 31 decimal places.
Request you to please suggest me the solution to overcome this dump.
Thanks & Regards,
Naresh.Hi,
If the problem occurs from your cutom programs, ask developer to fix them.
If error from SAP standard program and if you did not made any changes to program, raise product error message with SAP.
If it was SAP standard program and you made any changes by yourself/customer, revert back the changes.
Regards. -
I've created SPD 2013 workflow and deployed them onto that document library, This workflow execute on item update event. When updating library item, workflow triggered and completed successfully but workflow status column is not
showing the Internal Status values rather it is showing the Stage information. I've unchecked the "Automatically update stage name on workflow status" and republished the workflow. After that, it is still showing the stage information. Any help
is really appreciated.Hi Venkadesh,
It is by design that 2013 workflow will show stage name in the workflow status column when
Automatically update the workflow status to the current stage name is checked.
And the workflow status column will be blank when Automatically update the workflow status to the current stage name is unchecked.
For existing workflows, the workflow status will still exists with the previous values after unchecking Automatically update the workflow status to the current stage name.
We can use Set Workflow Status action to update the workflow status value based on our needs.
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Yahoo email will sometimes not show graphics, but shows numbers
Sometimes in an email, the graphics do not show up, but does show numbers (address, I think). If I forward it (yahoo mail) then the graphics do show up. I tested and this does NOT happen using Internet Explorer. I have 2 laptops, both running Firefox 6.0.2 - both Windows 7, one 32 bit and one 64 bit OS. Usually the graphics do show up.
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images permissions.default.images
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*http://kb.mozillazine.org/Images_or_animations_do_not_load -
Suddenly, I have found that I am not able to download and either save oor run any type of files (except .txt). The screen shows themdownlaoding, but they neither "save" nor "run". have searched (including hidden files), but they do not exist upon the computer
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.<br />
Do not forget to re-enable the scanning in your anti-virus software after you are finished with downloading and installing.<br />
See http://kb.mozillazine.org/Unable_to_save_or_download_files -
Internet showing up but not working iTouch 4th Gen
Help my Internet connection Is showing up but not working. it happens when the Internet goes off the router then resets it self which it for everything except my iPod :( Please help we've reset it again :( but no luck
Please help does anyone know what to do?
-
Revision: 21327
Revision: 21327
Author: [email protected]
Date: 2011-06-02 08:51:22 -0700 (Thu, 02 Jun 2011)
Log Message:
Updated the sample destination config to show the new "none" value for cluster-message-routing
Modified Paths:
blazeds/trunk/resources/config/messaging-config.xmlThanks Carlo for your reply.
I have read again the link and you are correct that in using the preferred command together with localhost under POTS dial-peer, I can now select which correct path to choose for my outbound calls. I'm just not very strong with dial-peer and translation rules at the moment.
I will try this solution during the weekend and let you know. But it would have been better if there was a sample configuration for this option. -
While updating a programme,it shows installing but it is not doing.
While updating a programme,it shows installing but it is not doing.
Try rebooting the ipad by pressing and holding the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go.
May work for you -
I have songs on my iPhone 6 that I can't remove and when I plug into iTunes and go to "Summary" and "On This Device" the songs don't show up but they are on my phone. How do I remove them? Not even sure how they got on actually since I have a iTouch and keep all my music there. HELP!!
Have you tried deleting the songs from Settings?
Settings -> General -> Usage -> Manage Storage (not the iCloud link!) -> Music and then click Edit to enable you to be able to delete.
Maybe you are looking for
-
Classic won't start, can't upgrade, and other problems...
There's something not quite right with my Mac, and I can't quite pinpoint it. Because of this, I'm not even certain I'm posting this in the right forum! Here's the situation: I have a PowerMac G4, upgraded with a an extra hard drive, an ATI Radeon Pr
-
Why does my phone take red pics in low light
When I use my flash in low light it looks red why is tht so
-
Stupid weird tomcat problem...
what does this mean? i'm at the end of the road with tomcat, it works when i first install it, but after restart it gives me this crap, i'm going mad about it and need help, plz spend a few seconds helping me... error: Catalina.start: LifecycleExcept
-
Advice needed regarding a - Adobe Photoshop Image 15 (.psd) - I can't open them correctly?
Hi folks, I recently agreed to work on some art for a friend, he sent me some files that appear on my PC as Adobe Photoshop Image 15 (.psd) - Only when i open them in my Photoshop CC (All updates installed that are available from the time this was
-
Just installed Adobe CS6 on laptop. Photoshop works, but Illustrator wont open up. Keeps telling me"free trial expired".